From: "John W. Linville" <linville@tuxdriver.com>
To: davem@davemloft.net
Cc: linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: pull request: wireless 2013-10-03
Date: Thu, 3 Oct 2013 16:10:24 -0400 [thread overview]
Message-ID: <20131003201023.GC3142@tuxdriver.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 9847 bytes --]
Dave,
Here is another batch of fixes intended for the 3.12 stream...
For the mac80211 bits, Johannes says:
"This time I have two fixes for IBSS (including one for wext, hah), a fix
for extended rates IEs, an active monitor checking fix and a sysfs
registration race fix."
On top of those...
Amitkumar Karwar brings an mwifiex fix for an interrupt loss issue
w/ SDIO devices. The problem was due to a command timeout issue
introduced by an earlier patch.
Felix Fietkau a stall in the ath9k driver. This patch fixes the
regression introduced in the commit "ath9k: use software queues for
un-aggregated data packets".
Stanislaw Gruszka reverts an rt2x00 patch that was found to cause
connection problems with some devices.
Please let me know if there are problems!
John
---
The following changes since commit 569943d0639c85a451ea853087cbd5f738247dd9:
Merge branch 'mv643xx' (2013-10-02 17:11:50 -0400)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git for-davem
for you to fetch changes up to 1eea72f03a139146f341e450cf56934b2e01a4d3:
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem (2013-10-03 16:00:03 -0400)
----------------------------------------------------------------
Amitkumar Karwar (1):
mwifiex: fix SDIO interrupt lost issue
Bruno Randolf (1):
cfg80211: fix warning when using WEXT for IBSS
Chun-Yeow Yeoh (1):
mac80211: fix the setting of extended supported rate IE
Felix Fietkau (2):
mac80211: drop spoofed packets in ad-hoc mode
ath9k: fix powersave response handling for BA session packets
Johannes Berg (1):
cfg80211: fix sysfs registration race
John W. Linville (2):
Merge branch 'for-john' of git://git.kernel.org/.../jberg/mac80211
Merge branch 'master' of git://git.kernel.org/.../linville/wireless into for-davem
Luciano Coelho (1):
cfg80211: use the correct macro to check for active monitor support
Stanislaw Gruszka (1):
Revert "rt2x00pci: Use PCI MSIs whenever possible"
drivers/net/wireless/ath/ath9k/xmit.c | 9 ++++++---
drivers/net/wireless/mwifiex/main.c | 6 ++++--
drivers/net/wireless/rt2x00/rt2x00pci.c | 9 +--------
net/mac80211/rx.c | 3 +++
net/mac80211/util.c | 5 +----
net/wireless/core.c | 21 +++++++++++++--------
net/wireless/ibss.c | 3 +++
net/wireless/nl80211.c | 4 ++--
8 files changed, 33 insertions(+), 27 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 5ac713d..dd30452 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1969,15 +1969,18 @@ static void ath_tx_txqaddbuf(struct ath_softc *sc, struct ath_txq *txq,
static void ath_tx_send_normal(struct ath_softc *sc, struct ath_txq *txq,
struct ath_atx_tid *tid, struct sk_buff *skb)
{
+ struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ath_frame_info *fi = get_frame_info(skb);
struct list_head bf_head;
- struct ath_buf *bf;
-
- bf = fi->bf;
+ struct ath_buf *bf = fi->bf;
INIT_LIST_HEAD(&bf_head);
list_add_tail(&bf->list, &bf_head);
bf->bf_state.bf_type = 0;
+ if (tid && (tx_info->flags & IEEE80211_TX_CTL_AMPDU)) {
+ bf->bf_state.bf_type = BUF_AMPDU;
+ ath_tx_addto_baw(sc, tid, bf);
+ }
bf->bf_next = NULL;
bf->bf_lastbf = bf;
diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c
index fd77833..c2b91f5 100644
--- a/drivers/net/wireless/mwifiex/main.c
+++ b/drivers/net/wireless/mwifiex/main.c
@@ -358,10 +358,12 @@ process_start:
}
} while (true);
- if ((adapter->int_status) || IS_CARD_RX_RCVD(adapter))
+ spin_lock_irqsave(&adapter->main_proc_lock, flags);
+ if ((adapter->int_status) || IS_CARD_RX_RCVD(adapter)) {
+ spin_unlock_irqrestore(&adapter->main_proc_lock, flags);
goto process_start;
+ }
- spin_lock_irqsave(&adapter->main_proc_lock, flags);
adapter->mwifiex_processing = false;
spin_unlock_irqrestore(&adapter->main_proc_lock, flags);
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
index 76d95de..dc49e52 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -105,13 +105,11 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct rt2x00_ops *ops)
goto exit_release_regions;
}
- pci_enable_msi(pci_dev);
-
hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw);
if (!hw) {
rt2x00_probe_err("Failed to allocate hardware\n");
retval = -ENOMEM;
- goto exit_disable_msi;
+ goto exit_release_regions;
}
pci_set_drvdata(pci_dev, hw);
@@ -152,9 +150,6 @@ exit_free_reg:
exit_free_device:
ieee80211_free_hw(hw);
-exit_disable_msi:
- pci_disable_msi(pci_dev);
-
exit_release_regions:
pci_release_regions(pci_dev);
@@ -179,8 +174,6 @@ void rt2x00pci_remove(struct pci_dev *pci_dev)
rt2x00pci_free_reg(rt2x00dev);
ieee80211_free_hw(hw);
- pci_disable_msi(pci_dev);
-
/*
* Free the PCI device data.
*/
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 54395d7..674eac1 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -3056,6 +3056,9 @@ static int prepare_for_handlers(struct ieee80211_rx_data *rx,
case NL80211_IFTYPE_ADHOC:
if (!bssid)
return 0;
+ if (ether_addr_equal(sdata->vif.addr, hdr->addr2) ||
+ ether_addr_equal(sdata->u.ibss.bssid, hdr->addr2))
+ return 0;
if (ieee80211_is_beacon(hdr->frame_control)) {
return 1;
} else if (!ieee80211_bssid_match(bssid, sdata->u.ibss.bssid)) {
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index e1b34a1..9c3200b 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -2103,7 +2103,7 @@ int ieee80211_add_ext_srates_ie(struct ieee80211_sub_if_data *sdata,
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_supported_band *sband;
- int rate, skip, shift;
+ int rate, shift;
u8 i, exrates, *pos;
u32 basic_rates = sdata->vif.bss_conf.basic_rates;
u32 rate_flags;
@@ -2131,14 +2131,11 @@ int ieee80211_add_ext_srates_ie(struct ieee80211_sub_if_data *sdata,
pos = skb_put(skb, exrates + 2);
*pos++ = WLAN_EID_EXT_SUPP_RATES;
*pos++ = exrates;
- skip = 0;
for (i = 8; i < sband->n_bitrates; i++) {
u8 basic = 0;
if ((rate_flags & sband->bitrates[i].flags)
!= rate_flags)
continue;
- if (skip++ < 8)
- continue;
if (need_basic && basic_rates & BIT(i))
basic = 0x80;
rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 6715396..fe8d4f2 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -566,18 +566,13 @@ int wiphy_register(struct wiphy *wiphy)
/* check and set up bitrates */
ieee80211_set_bitrate_flags(wiphy);
-
+ rtnl_lock();
res = device_add(&rdev->wiphy.dev);
- if (res)
- return res;
-
- res = rfkill_register(rdev->rfkill);
if (res) {
- device_del(&rdev->wiphy.dev);
+ rtnl_unlock();
return res;
}
- rtnl_lock();
/* set up regulatory info */
wiphy_regulatory_register(wiphy);
@@ -606,6 +601,15 @@ int wiphy_register(struct wiphy *wiphy)
rdev->wiphy.registered = true;
rtnl_unlock();
+
+ res = rfkill_register(rdev->rfkill);
+ if (res) {
+ rfkill_destroy(rdev->rfkill);
+ rdev->rfkill = NULL;
+ wiphy_unregister(&rdev->wiphy);
+ return res;
+ }
+
return 0;
}
EXPORT_SYMBOL(wiphy_register);
@@ -640,7 +644,8 @@ void wiphy_unregister(struct wiphy *wiphy)
rtnl_unlock();
__count == 0; }));
- rfkill_unregister(rdev->rfkill);
+ if (rdev->rfkill)
+ rfkill_unregister(rdev->rfkill);
rtnl_lock();
rdev->wiphy.registered = false;
diff --git a/net/wireless/ibss.c b/net/wireless/ibss.c
index 39bff7d..403fe29 100644
--- a/net/wireless/ibss.c
+++ b/net/wireless/ibss.c
@@ -263,6 +263,8 @@ int cfg80211_ibss_wext_join(struct cfg80211_registered_device *rdev,
if (chan->flags & IEEE80211_CHAN_DISABLED)
continue;
wdev->wext.ibss.chandef.chan = chan;
+ wdev->wext.ibss.chandef.center_freq1 =
+ chan->center_freq;
break;
}
@@ -347,6 +349,7 @@ int cfg80211_ibss_wext_siwfreq(struct net_device *dev,
if (chan) {
wdev->wext.ibss.chandef.chan = chan;
wdev->wext.ibss.chandef.width = NL80211_CHAN_WIDTH_20_NOHT;
+ wdev->wext.ibss.chandef.center_freq1 = freq;
wdev->wext.ibss.channel_fixed = true;
} else {
/* cfg80211_ibss_wext_join will pick one if needed */
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index af8d84a..626dc3b 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2421,7 +2421,7 @@ static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info)
change = true;
}
- if (flags && (*flags & NL80211_MNTR_FLAG_ACTIVE) &&
+ if (flags && (*flags & MONITOR_FLAG_ACTIVE) &&
!(rdev->wiphy.features & NL80211_FEATURE_ACTIVE_MONITOR))
return -EOPNOTSUPP;
@@ -2483,7 +2483,7 @@ static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info)
info->attrs[NL80211_ATTR_MNTR_FLAGS] : NULL,
&flags);
- if (!err && (flags & NL80211_MNTR_FLAG_ACTIVE) &&
+ if (!err && (flags & MONITOR_FLAG_ACTIVE) &&
!(rdev->wiphy.features & NL80211_FEATURE_ACTIVE_MONITOR))
return -EOPNOTSUPP;
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
next reply other threads:[~2013-10-03 20:15 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-03 20:10 John W. Linville [this message]
2013-10-03 20:54 ` pull request: wireless 2013-10-03 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131003201023.GC3142@tuxdriver.com \
--to=linville@tuxdriver.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.