Re: [PATCH 1/3] usb: phy: Add RCAR Gen2 USB phy

[Felipe Balbi <balbi@ti.com>]

[-- Attachment #1: Type: text/plain, Size: 1337 bytes --]

Hi,

On Thu, Oct 10, 2013 at 02:14:45AM +0400, Valentine Barshak wrote:
> This adds RCAR Gen2 USB phy support. The driver configures
> USB channels 0/2 which are shared between PCI USB hosts and
> USBHS/USBSS devices. It also controls internal USBHS phy.
> 
> Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
> ---
>  drivers/usb/phy/Kconfig                         |  13 ++
>  drivers/usb/phy/Makefile                        |   1 +
>  drivers/usb/phy/phy-rcar-gen2-usb.c             | 248 ++++++++++++++++++++++++
>  include/linux/platform_data/usb-rcar-gen2-phy.h |  22 +++
>  4 files changed, 284 insertions(+)
>  create mode 100644 drivers/usb/phy/phy-rcar-gen2-usb.c
>  create mode 100644 include/linux/platform_data/usb-rcar-gen2-phy.h
> 
> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
> index d5589f9..bba7d29 100644
> --- a/drivers/usb/phy/Kconfig
> +++ b/drivers/usb/phy/Kconfig
> @@ -214,6 +214,19 @@ config USB_RCAR_PHY
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called phy-rcar-usb.
>  
> +config USB_RCAR_GEN2_PHY
> +	tristate "Renesas R-Car Gen2 USB PHY support"
> +	depends on ARCH_R8A7790 || ARCH_R8A7791 || (ARM && COMPILE_TEST)

see my question on other thread, why the forced ARM dependency ?

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]