Re: [PATCH] ARM: dts: move wl12xx pins to the proper pinmux for pandaboard

[Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>]

* Andrey Konovalov <andrey.konovalov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> [131011 12:42]:
> Commit 851320e (ARM: dts: Fix muxing and regulator for wl12xx on the
> SDIO bus for pandaboard) put the wl12xx pins into omap4_pmx_wkup. This
> is not correct, and results in the following messages at the boot time:
> 
>  pinctrl-single 4a31e040.pinmux: mux offset out of range: 0x38 (0x38)
>  pinctrl-single 4a31e040.pinmux: could not add functions for pinmux_wl12xx_pins 56x
> 
> Actually these pins belong to omap4_pmx_core.

Oops indeed. I wonder how that happened..

Acked-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
 
> Signed-off-by: Andrey Konovalov <andrey.konovalov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---
>  arch/arm/boot/dts/omap4-panda-common.dtsi |   19 ++++++++++---------
>  1 file changed, 10 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
> index 814ab67..712ddbf 100644
> --- a/arch/arm/boot/dts/omap4-panda-common.dtsi
> +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
> @@ -239,15 +239,6 @@
>  			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
>  		>;
>  	};
> -};
> -
> -&omap4_pmx_wkup {
> -	led_wkgpio_pins: pinmux_leds_wkpins {
> -		pinctrl-single,pins = <
> -			0x1a (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk7 */
> -			0x1c (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
> -		>;
> -	};
> 
>  	/*
>  	 * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
> @@ -277,6 +268,16 @@
>  	};
>  };
> 
> +&omap4_pmx_wkup {
> +	led_wkgpio_pins: pinmux_leds_wkpins {
> +		pinctrl-single,pins = <
> +			0x1a (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk7 */
> +			0x1c (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
> +		>;
> +	};
> +
> +};
> +
>  &i2c1 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&i2c1_pins>;
> -- 1.7.9.5
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html