From: heiko@sntech.de (Heiko Stübner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/5] ARM: rockchip: move shared dt properties to common source file
Date: Tue, 15 Oct 2013 12:59:34 +0200 [thread overview]
Message-ID: <201310151259.34314.heiko@sntech.de> (raw)
In-Reply-To: <201310151258.53435.heiko@sntech.de>
The rk3188 SoC shares a lot of peripherals with the rk3066 SoC,
but not all. Therefore move the common parts to a shared dtsi.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/boot/dts/rk3066a.dtsi | 98 +--------------------------------
arch/arm/boot/dts/rk3xxx.dtsi | 117 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 118 insertions(+), 97 deletions(-)
create mode 100644 arch/arm/boot/dts/rk3xxx.dtsi
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 56bfac9..2218c64 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -14,15 +14,12 @@
*/
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/rockchip.h>
-#include "skeleton.dtsi"
+#include "rk3xxx.dtsi"
#include "rk3066a-clocks.dtsi"
/ {
compatible = "rockchip,rk3066a";
- interrupt-parent = <&gic>;
cpus {
#address-cells = <1>;
@@ -43,33 +40,6 @@
};
soc {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges;
-
- gic: interrupt-controller at 1013d000 {
- compatible = "arm,cortex-a9-gic";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = <0x1013d000 0x1000>,
- <0x1013c100 0x0100>;
- };
-
- L2: l2-cache-controller at 10138000 {
- compatible = "arm,pl310-cache";
- reg = <0x10138000 0x1000>;
- cache-unified;
- cache-level = <2>;
- };
-
- local-timer at 1013c600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x1013c600 0x20>;
- interrupts = <GIC_PPI 13 0x304>;
- clocks = <&dummy150m>;
- };
-
timer at 20038000 {
compatible = "snps,dw-apb-timer-osc";
reg = <0x20038000 0x100>;
@@ -320,71 +290,5 @@
};
};
};
-
- uart0: serial at 10124000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x10124000 0x400>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <1>;
- clocks = <&clk_gates1 8>;
- status = "disabled";
- };
-
- uart1: serial at 10126000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x10126000 0x400>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <1>;
- clocks = <&clk_gates1 10>;
- status = "disabled";
- };
-
- uart2: serial at 20064000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x20064000 0x400>;
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <1>;
- clocks = <&clk_gates1 12>;
- status = "disabled";
- };
-
- uart3: serial at 20068000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x20068000 0x400>;
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <1>;
- clocks = <&clk_gates1 14>;
- status = "disabled";
- };
-
- dwmmc at 10214000 {
- compatible = "rockchip,rk2928-dw-mshc";
- reg = <0x10214000 0x1000>;
- interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- clocks = <&clk_gates5 10>, <&clk_gates2 11>;
- clock-names = "biu", "ciu";
-
- status = "disabled";
- };
-
- dwmmc at 10218000 {
- compatible = "rockchip,rk2928-dw-mshc";
- reg = <0x10218000 0x1000>;
- interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- clocks = <&clk_gates5 11>, <&clk_gates2 13>;
- clock-names = "biu", "ciu";
-
- status = "disabled";
- };
};
};
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
new file mode 100644
index 0000000..fd3e476
--- /dev/null
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -0,0 +1,117 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&gic>;
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+
+ gic: interrupt-controller at 1013d000 {
+ compatible = "arm,cortex-a9-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x1013d000 0x1000>,
+ <0x1013c100 0x0100>;
+ };
+
+ L2: l2-cache-controller at 10138000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x10138000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ local-timer at 1013c600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x1013c600 0x20>;
+ interrupts = <GIC_PPI 13 0x304>;
+ clocks = <&dummy150m>;
+ };
+
+ uart0: serial at 10124000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x10124000 0x400>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clocks = <&clk_gates1 8>;
+ status = "disabled";
+ };
+
+ uart1: serial at 10126000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x10126000 0x400>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clocks = <&clk_gates1 10>;
+ status = "disabled";
+ };
+
+ uart2: serial at 20064000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x20064000 0x400>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clocks = <&clk_gates1 12>;
+ status = "disabled";
+ };
+
+ uart3: serial at 20068000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x20068000 0x400>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clocks = <&clk_gates1 14>;
+ status = "disabled";
+ };
+
+ dwmmc at 10214000 {
+ compatible = "rockchip,rk2928-dw-mshc";
+ reg = <0x10214000 0x1000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clocks = <&clk_gates5 10>, <&clk_gates2 11>;
+ clock-names = "biu", "ciu";
+
+ status = "disabled";
+ };
+
+ dwmmc at 10218000 {
+ compatible = "rockchip,rk2928-dw-mshc";
+ reg = <0x10218000 0x1000>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clocks = <&clk_gates5 11>, <&clk_gates2 13>;
+ clock-names = "biu", "ciu";
+
+ status = "disabled";
+ };
+ };
+};
--
1.7.10.4
next prev parent reply other threads:[~2013-10-15 10:59 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-15 10:58 [PATCH 0/5] ARM: rockchip: Support for RK3188 and Radxa Rock board Heiko Stübner
2013-10-15 10:59 ` Heiko Stübner [this message]
2013-10-15 11:00 ` [PATCH 2/5] ARM: rockchip: enable arm-global-timer Heiko Stübner
2013-10-15 11:00 ` [PATCH 3/5] ARM: rockchip: add dts for bqcurie2 tablet Heiko Stübner
2013-10-15 11:01 ` [PATCH 4/5] ARM: rockchip: add support for rk3188 and Radxa Rock board Heiko Stübner
2013-10-15 11:08 ` Heiko Stübner
2013-10-15 11:01 ` [PATCH 5/5] MAINTAINERS: Add maintainers entry for Rockchip SoCs Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201310151259.34314.heiko@sntech.de \
--to=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.