From: Anton Blanchard <anton@samba.org>
To: agraf@suse.de
Cc: tommusta@gmail.com, qemu-ppc@nongnu.org, qemu-devel@nongnu.org,
rth@twiddle.net
Subject: [Qemu-devel] [PATCH 2/7] Add MSR VSX and Associated Exception
Date: Tue, 22 Oct 2013 22:06:17 +1100 [thread overview]
Message-ID: <20131022220617.798f5c53@kryten> (raw)
In-Reply-To: <20131022220546.2a20d02a@kryten>
From: Tom Musta <tommusta@gmail.com>
This patch adds support for the VSX bit of the PowerPC Machine
State Register (MSR) as well as the corresponding VSX Unavailable
exception.
The VSX bit is added to the defined bits masks of the Power7 and
Power8 CPU models.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
---
Index: b/target-ppc/cpu.h
===================================================================
--- a/target-ppc/cpu.h
+++ b/target-ppc/cpu.h
@@ -236,6 +236,8 @@ enum {
POWERPC_EXCP_NMEXTBR = 91, /* Non maskable external breakpoint */
POWERPC_EXCP_ITLBE = 92, /* Instruction TLB error */
POWERPC_EXCP_DTLBE = 93, /* Data TLB error */
+ /* VSX Unavailable (Power ISA 2.06 and later) */
+ POWERPC_EXCP_VSXU = 94, /* VSX Unavailable */
/* EOL */
POWERPC_EXCP_NB = 96,
/* QEMU exceptions: used internally during code translation */
@@ -427,6 +429,7 @@ struct ppc_slb_t {
#define MSR_VR 25 /* altivec available x hflags */
#define MSR_SPE 25 /* SPE enable for BookE x hflags */
#define MSR_AP 23 /* Access privilege state on 602 hflags */
+#define MSR_VSX 23 /* Vector Scalar Extension (ISA 2.06 and later) x hflags */
#define MSR_SA 22 /* Supervisor access mode on 602 hflags */
#define MSR_KEY 19 /* key bit on 603e */
#define MSR_POW 18 /* Power management */
@@ -467,6 +470,7 @@ struct ppc_slb_t {
#define msr_vr ((env->msr >> MSR_VR) & 1)
#define msr_spe ((env->msr >> MSR_SPE) & 1)
#define msr_ap ((env->msr >> MSR_AP) & 1)
+#define msr_vsx ((env->msr >> MSR_VSX) & 1)
#define msr_sa ((env->msr >> MSR_SA) & 1)
#define msr_key ((env->msr >> MSR_KEY) & 1)
#define msr_pow ((env->msr >> MSR_POW) & 1)
Index: b/target-ppc/excp_helper.c
===================================================================
--- a/target-ppc/excp_helper.c
+++ b/target-ppc/excp_helper.c
@@ -390,6 +390,11 @@ static inline void powerpc_excp(PowerPCC
new_msr |= (target_ulong)MSR_HVB;
}
goto store_current;
+ case POWERPC_EXCP_VSXU: /* VSX unavailable exception */
+ if (lpes1 == 0) {
+ new_msr |= (target_ulong)MSR_HVB;
+ }
+ goto store_current;
case POWERPC_EXCP_PIT: /* Programmable interval timer interrupt */
LOG_EXCP("PIT exception\n");
goto store_next;
Index: b/target-ppc/translate.c
===================================================================
--- a/target-ppc/translate.c
+++ b/target-ppc/translate.c
@@ -199,6 +199,7 @@ typedef struct DisasContext {
#endif
int fpu_enabled;
int altivec_enabled;
+ int vsx_enabled;
int spe_enabled;
ppc_spr_t *spr_cb; /* Needed to check rights for mfspr/mtspr */
int singlestep_enabled;
@@ -9763,6 +9764,11 @@ static inline void gen_intermediate_code
ctx.altivec_enabled = msr_vr;
else
ctx.altivec_enabled = 0;
+ if ((env->flags & POWERPC_FLAG_VSX) && msr_vsx) {
+ ctx.vsx_enabled = msr_vsx;
+ } else {
+ ctx.vsx_enabled = 0;
+ }
if ((env->flags & POWERPC_FLAG_SE) && msr_se)
ctx.singlestep_enabled = CPU_SINGLE_STEP;
else
Index: b/target-ppc/translate_init.c
===================================================================
--- a/target-ppc/translate_init.c
+++ b/target-ppc/translate_init.c
@@ -3061,6 +3061,7 @@ static void init_excp_POWER7 (CPUPPCStat
env->excp_vectors[POWERPC_EXCP_TRACE] = 0x00000D00;
env->excp_vectors[POWERPC_EXCP_PERFM] = 0x00000F00;
env->excp_vectors[POWERPC_EXCP_VPU] = 0x00000F20;
+ env->excp_vectors[POWERPC_EXCP_VSXU] = 0x00000F40;
env->excp_vectors[POWERPC_EXCP_IABR] = 0x00001300;
env->excp_vectors[POWERPC_EXCP_MAINT] = 0x00001600;
env->excp_vectors[POWERPC_EXCP_VPUA] = 0x00001700;
@@ -7232,7 +7233,7 @@ POWERPC_FAMILY(POWER7)(ObjectClass *oc,
PPC_SEGMENT_64B | PPC_SLBI |
PPC_POPCNTB | PPC_POPCNTWD;
pcc->insns_flags2 = PPC2_VSX | PPC2_DFP | PPC2_DBRX | PPC2_ISA205;
- pcc->msr_mask = 0x800000000204FF37ULL;
+ pcc->msr_mask = 0x800000000284FF37ULL;
pcc->mmu_model = POWERPC_MMU_2_06;
#if defined(CONFIG_SOFTMMU)
pcc->handle_mmu_fault = ppc_hash64_handle_mmu_fault;
@@ -7267,7 +7268,7 @@ POWERPC_FAMILY(POWER8)(ObjectClass *oc,
PPC_SEGMENT_64B | PPC_SLBI |
PPC_POPCNTB | PPC_POPCNTWD;
pcc->insns_flags2 = PPC2_VSX | PPC2_DFP | PPC2_DBRX;
- pcc->msr_mask = 0x800000000204FF36ULL;
+ pcc->msr_mask = 0x800000000284FF36ULL;
pcc->mmu_model = POWERPC_MMU_2_06;
#if defined(CONFIG_SOFTMMU)
pcc->handle_mmu_fault = ppc_hash64_handle_mmu_fault;
next prev parent reply other threads:[~2013-10-22 11:06 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-22 11:05 [Qemu-devel] [PATCH 1/7] Declare and Enable VSX Anton Blanchard
2013-10-22 11:06 ` Anton Blanchard [this message]
2013-10-22 15:10 ` [Qemu-devel] [PATCH 2/7] Add MSR VSX and Associated Exception Richard Henderson
2013-10-22 11:06 ` [Qemu-devel] [PATCH 3/7] Add VSX Instruction Decoders Anton Blanchard
2013-10-22 11:07 ` [Qemu-devel] [PATCH 4/7] Add VSR to Global Registers Anton Blanchard
2013-10-22 11:08 ` [Qemu-devel] [PATCH 5/7] Add lxvd2x Anton Blanchard
2013-10-22 11:09 ` [Qemu-devel] [PATCH 6/7] Add stxvd2x Anton Blanchard
2013-10-22 11:09 ` [Qemu-devel] [PATCH 7/7] Add xxpermdi Anton Blanchard
2013-12-03 16:10 ` [Qemu-devel] [PATCH 1/7] Declare and Enable VSX Tom Musta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131022220617.798f5c53@kryten \
--to=anton@samba.org \
--cc=agraf@suse.de \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=rth@twiddle.net \
--cc=tommusta@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.