From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [PATCH 1/3] ARM: dts: omap4-panda: add DPI pinmuxing Date: Tue, 29 Oct 2013 14:25:05 -0700 Message-ID: <20131029212505.GJ15154@atomide.com> References: <1382695658-18757-1-git-send-email-tomi.valkeinen@ti.com> <526F8ADA.3030003@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from mho-02-ewr.mailhop.org ([204.13.248.72]:65026 "EHLO mho-02-ewr.mailhop.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752167Ab3J2VZK (ORCPT ); Tue, 29 Oct 2013 17:25:10 -0400 Content-Disposition: inline In-Reply-To: <526F8ADA.3030003@ti.com> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Tomi Valkeinen Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Archit Taneja * Tomi Valkeinen [131029 03:16]: > Hi Tony, > > On 25/10/13 13:07, Tomi Valkeinen wrote: > > New u-boot versions no longer set the pinmuxing for Panda's DPI output, > > and the muxing has to be done in the .dts file. > > > > Add pinmuxing for DPI and TFP410. Without these, the DVI output on Panda > > does not work with recent u-boot. > > > > Signed-off-by: Tomi Valkeinen > > The two latter patches in this series needs more work and can be > dropped, but this one should be applied to make Panda work properly with > new u-boots. OK I'll pick this patch into omap-for-v3.13/dt. Regards, Tony From mboxrd@z Thu Jan 1 00:00:00 1970 From: tony@atomide.com (Tony Lindgren) Date: Tue, 29 Oct 2013 14:25:05 -0700 Subject: [PATCH 1/3] ARM: dts: omap4-panda: add DPI pinmuxing In-Reply-To: <526F8ADA.3030003@ti.com> References: <1382695658-18757-1-git-send-email-tomi.valkeinen@ti.com> <526F8ADA.3030003@ti.com> Message-ID: <20131029212505.GJ15154@atomide.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org * Tomi Valkeinen [131029 03:16]: > Hi Tony, > > On 25/10/13 13:07, Tomi Valkeinen wrote: > > New u-boot versions no longer set the pinmuxing for Panda's DPI output, > > and the muxing has to be done in the .dts file. > > > > Add pinmuxing for DPI and TFP410. Without these, the DVI output on Panda > > does not work with recent u-boot. > > > > Signed-off-by: Tomi Valkeinen > > The two latter patches in this series needs more work and can be > dropped, but this one should be applied to make Panda work properly with > new u-boots. OK I'll pick this patch into omap-for-v3.13/dt. Regards, Tony