From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, "Eric Dumazet" <edumazet@google.com>,
"Yuchung Cheng" <ycheng@google.com>,
"Neal Cardwell" <ncardwell@google.com>,
"Ilpo Järvinen" <ilpo.jarvinen@helsinki.fi>,
"David S. Miller" <davem@davemloft.net>
Subject: [ 02/32] tcp: do not forget FIN in tcp_shifted_skb()
Date: Fri, 1 Nov 2013 14:43:13 -0700 [thread overview]
Message-ID: <20131101214314.274235966@linuxfoundation.org> (raw)
In-Reply-To: <20131101214313.735463599@linuxfoundation.org>
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit 5e8a402f831dbe7ee831340a91439e46f0d38acd ]
Yuchung found following problem :
There are bugs in the SACK processing code, merging part in
tcp_shift_skb_data(), that incorrectly resets or ignores the sacked
skbs FIN flag. When a receiver first SACK the FIN sequence, and later
throw away ofo queue (e.g., sack-reneging), the sender will stop
retransmitting the FIN flag, and hangs forever.
Following packetdrill test can be used to reproduce the bug.
$ cat sack-merge-bug.pkt
`sysctl -q net.ipv4.tcp_fack=0`
// Establish a connection and send 10 MSS.
0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+.000 bind(3, ..., ...) = 0
+.000 listen(3, 1) = 0
+.050 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7>
+.000 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 6>
+.001 < . 1:1(0) ack 1 win 1024
+.000 accept(3, ..., ...) = 4
+.100 write(4, ..., 12000) = 12000
+.000 shutdown(4, SHUT_WR) = 0
+.000 > . 1:10001(10000) ack 1
+.050 < . 1:1(0) ack 2001 win 257
+.000 > FP. 10001:12001(2000) ack 1
+.050 < . 1:1(0) ack 2001 win 257 <sack 10001:11001,nop,nop>
+.050 < . 1:1(0) ack 2001 win 257 <sack 10001:12002,nop,nop>
// SACK reneg
+.050 < . 1:1(0) ack 12001 win 257
+0 %{ print "unacked: ",tcpi_unacked }%
+5 %{ print "" }%
First, a typo inverted left/right of one OR operation, then
code forgot to advance end_seq if the merged skb carried FIN.
Bug was added in 2.6.29 by commit 832d11c5cd076ab
("tcp: Try to restore large SKBs while SACK processing")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/tcp_input.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -1468,7 +1468,10 @@ static int tcp_shifted_skb(struct sock *
tp->lost_cnt_hint -= tcp_skb_pcount(prev);
}
- TCP_SKB_CB(skb)->tcp_flags |= TCP_SKB_CB(prev)->tcp_flags;
+ TCP_SKB_CB(prev)->tcp_flags |= TCP_SKB_CB(skb)->tcp_flags;
+ if (TCP_SKB_CB(skb)->tcp_flags & TCPHDR_FIN)
+ TCP_SKB_CB(prev)->end_seq++;
+
if (skb == tcp_highest_sack(sk))
tcp_advance_highest_sack(sk, skb);
next prev parent reply other threads:[~2013-11-01 21:51 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-01 21:43 [ 00/32] 3.4.68-stable review Greg Kroah-Hartman
2013-11-01 21:43 ` [ 01/32] tcp: must unclone packets before mangling them Greg Kroah-Hartman
2013-11-01 21:43 ` Greg Kroah-Hartman [this message]
2013-11-01 21:43 ` [ 03/32] net: do not call sock_put() on TIMEWAIT sockets Greg Kroah-Hartman
2013-11-01 21:43 ` [ 04/32] net: mv643xx_eth: update statistics timer from timer context only Greg Kroah-Hartman
2013-11-01 21:43 ` [ 05/32] net: mv643xx_eth: fix orphaned statistics timer crash Greg Kroah-Hartman
2013-11-01 21:43 ` [ 06/32] net: heap overflow in __audit_sockaddr() Greg Kroah-Hartman
2013-11-01 21:43 ` [ 07/32] proc connector: fix info leaks Greg Kroah-Hartman
2013-11-01 21:43 ` [ 08/32] ipv4: fix ineffective source address selection Greg Kroah-Hartman
2013-11-01 21:43 ` [ 09/32] can: dev: fix nlmsg size calculation in can_get_size() Greg Kroah-Hartman
2013-11-01 21:43 ` [ 10/32] ipv6: restrict neighbor entry creation to output flow Greg Kroah-Hartman
2013-11-01 21:43 ` [ 11/32] bridge: Correctly clamp MAX forward_delay when enabling STP Greg Kroah-Hartman
2013-11-01 21:43 ` Greg Kroah-Hartman
2013-11-01 21:43 ` [ 12/32] net: vlan: fix nlmsg size calculation in vlan_get_size() Greg Kroah-Hartman
2013-11-01 21:43 ` [ 13/32] l2tp: must disable bh before calling l2tp_xmit_skb() Greg Kroah-Hartman
2013-11-01 21:43 ` [ 14/32] farsync: fix info leak in ioctl Greg Kroah-Hartman
2013-11-01 21:43 ` [ 15/32] unix_diag: fix info leak Greg Kroah-Hartman
2013-11-01 21:43 ` [ 16/32] connector: use nlmsg_len() to check message length Greg Kroah-Hartman
2013-11-01 21:43 ` [ 17/32] bnx2x: record rx queue for LRO packets Greg Kroah-Hartman
2013-11-01 21:43 ` [ 18/32] net: dst: provide accessor function to dst->xfrm Greg Kroah-Hartman
2013-11-01 21:43 ` [ 19/32] sctp: Use software crc32 checksum when xfrm transform will happen Greg Kroah-Hartman
2013-11-01 21:43 ` [ 20/32] sctp: Perform software checksum if packet has to be fragmented Greg Kroah-Hartman
2013-11-01 21:43 ` [ 21/32] wanxl: fix info leak in ioctl Greg Kroah-Hartman
2013-11-01 21:43 ` [ 22/32] net: unix: inherit SOCK_PASS{CRED, SEC} flags from socket to fix race Greg Kroah-Hartman
2013-11-01 21:43 ` [ 23/32] net: fix cipso packet validation when !NETLABEL Greg Kroah-Hartman
2013-11-01 21:43 ` [ 24/32] inet: fix possible memory corruption with UDP_CORK and UFO Greg Kroah-Hartman
2013-11-01 21:43 ` [ 25/32] davinci_emac.c: Fix IFF_ALLMULTI setup Greg Kroah-Hartman
2013-11-01 21:43 ` [ 26/32] ext3: return 32/64-bit dir name hash according to usage type Greg Kroah-Hartman
2013-11-01 21:43 ` [ 27/32] dm snapshot: fix data corruption Greg Kroah-Hartman
2013-11-01 21:43 ` [ 28/32] writeback: fix negative bdi max pause Greg Kroah-Hartman
2013-11-01 21:43 ` [ 29/32] wireless: radiotap: fix parsing buffer overrun Greg Kroah-Hartman
2013-11-01 21:43 ` [ 30/32] USB: serial: ti_usb_3410_5052: add Abbott strip port ID to combined table as well Greg Kroah-Hartman
2013-11-01 21:43 ` [ 31/32] USB: serial: option: add support for Inovia SEW858 device Greg Kroah-Hartman
2013-11-01 21:43 ` [ 32/32] usb: serial: option: blacklist Olivetti Olicard200 Greg Kroah-Hartman
2013-11-02 2:28 ` [ 00/32] 3.4.68-stable review Guenter Roeck
2013-11-02 21:33 ` Shuah Khan
2013-11-04 3:07 ` Satoru Takeuchi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131101214314.274235966@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=ilpo.jarvinen@helsinki.fi \
--cc=linux-kernel@vger.kernel.org \
--cc=ncardwell@google.com \
--cc=stable@vger.kernel.org \
--cc=ycheng@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.