All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
To: Rostislav Lisovy <lisovy-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: "devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
	<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	"pisa-/N2ztlQkxE7Ub/6JBqosbQ@public.gmane.org"
	<pisa-/N2ztlQkxE7Ub/6JBqosbQ@public.gmane.org>
Subject: Re: [PATCH 3/4] ARM: dts: i.MX53: dts for Voipac x53-dmm-668 module
Date: Fri, 1 Nov 2013 15:58:00 -0700	[thread overview]
Message-ID: <20131101225759.GA3224@kartoffel> (raw)
In-Reply-To: <1381874609-14464-4-git-send-email-lisovy-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

On Tue, Oct 15, 2013 at 11:03:28PM +0100, Rostislav Lisovy wrote:
> Enable UART1 and FEC
> 
> Signed-off-by: Rostislav Lisovy <lisovy-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> 
>  create mode 100644 arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
> 
> diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
> new file mode 100644
> index 0000000..04695c9
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
> @@ -0,0 +1,195 @@
> +/*
> + * Copyright 2013 Rostislav Lisovy <lisovy-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>, PiKRON s.r.o.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +#include "imx53.dtsi"
> +
> +/ {
> +	model = "Voipac i.MX53 X53-DMM-668";
> +	compatible = "vp,imx53-dmm-668", "fsl,imx53";
> +
> +	memory@0 {
> +		device_type = "memory";
> +		reg = <0x70000000 0x20000000>;
> +	};
> +
> +	memory@1 {
> +		device_type = "memory";
> +		reg = <0xb0000000 0x20000000>;
> +	};

This looks wrong. Any unit-address should match the first reg entry, and I've
not seen memory nodes with unit addresses anywhere else.

Why not:

memory {
	device_type = "memory";
	reg = <0x70000000 0x20000000>,
	      <0xb0000000 0x20000000>;
};

> +
> +	regulators {
> +		compatible = "simple-bus";
> +
> +		reg_3p3v: 3p3v {
> +			compatible = "regulator-fixed";
> +			regulator-name = "3P3V";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			regulator-always-on;
> +		};
> +	};
> +};

Is there any reason for placing these under a simple-bus rather than under the
root?

Thanks,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2013-11-01 22:58 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-15 22:03 [PATCH 0/4] Devicetree support for Voipac i.MX53 module Rostislav Lisovy
     [not found] ` <1381874609-14464-1-git-send-email-lisovy-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-10-15 22:03   ` [PATCH 1/4] ARM: dts: i.MX53: Add alternate pinmux option for i2c_3 Rostislav Lisovy
2013-10-15 22:03   ` [PATCH 2/4] ARM: dts: i.MX53: Internal keyboard controller Rostislav Lisovy
2013-10-15 22:03   ` [PATCH 3/4] ARM: dts: i.MX53: dts for Voipac x53-dmm-668 module Rostislav Lisovy
     [not found]     ` <1381874609-14464-4-git-send-email-lisovy-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-11-01 22:58       ` Mark Rutland [this message]
2013-11-03 15:38         ` Rostislav Lisovy
2013-11-03 15:49         ` Tomasz Figa
2013-10-15 22:03   ` [PATCH 4/4] ARM: dts: i.MX53: Devicetree for Voipac Baseboard using " Rostislav Lisovy
2013-10-16  7:31   ` [PATCH 0/4] Devicetree support for Voipac i.MX53 module Sascha Hauer
  -- strict thread matches above, loose matches on Subject: below --
2013-10-22 17:07 [PATCH 0/4] Devicetree description " Rostislav Lisovy
2013-10-22 17:07 ` [PATCH 3/4] ARM: dts: i.MX53: dts for Voipac x53-dmm-668 module Rostislav Lisovy
2013-10-22 17:07   ` Rostislav Lisovy
2013-10-23  7:27   ` Shawn Guo
2013-10-23  7:27     ` Shawn Guo
2013-10-23  7:27     ` Shawn Guo
2013-10-24 19:12     ` Rostislav Lisovy
2013-10-24 19:12       ` Rostislav Lisovy
2013-10-24 19:49       ` Matt Sealey
2013-10-24 19:49         ` Matt Sealey
2013-10-24 19:49         ` Matt Sealey
2013-10-24 19:58         ` Rostislav Lisovy
2013-10-24 19:58           ` Rostislav Lisovy
2013-10-24 19:58           ` Rostislav Lisovy
2013-10-25  1:27           ` Shawn Guo
2013-10-25  1:27             ` Shawn Guo
2013-10-25  1:27             ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20131101225759.GA3224@kartoffel \
    --to=mark.rutland-5wv7dgnigg8@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=lisovy-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=pisa-/N2ztlQkxE7Ub/6JBqosbQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.