From: Greg KH <gregkh@linuxfoundation.org>
To: Linus Torvalds <torvalds@linux-foundation.org>,
Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org
Subject: [GIT PATCH] USB patches for 3.13-rc1
Date: Wed, 6 Nov 2013 14:53:14 -0800 [thread overview]
Message-ID: <20131106225314.GA8702@kroah.com> (raw)
The following changes since commit 31d141e3a666269a3b6fcccddb0351caf7454240:
Linux 3.12-rc6 (2013-10-19 12:28:15 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git/ tags/usb-3.13-rc1
for you to fetch changes up to 7d49f0bac41ee9b012af1efe2f725d91a87a8fe9:
USB: Maintainers change for usb serial drivers (2013-10-31 08:53:52 -0700)
----------------------------------------------------------------
USB driver update for 3.13-rc1
Here's the big USB driver update for 3.13-rc1.
It includes the usual xhci changes, EHCI updates to get the scheduling
of USB transactions working better, and a raft of gadget and musb
updates as well.
All of this has been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----------------------------------------------------------------
Alan Stern (21):
USB: see if URB comes from a completion handler
USB: EHCI: code rearrangement in iso_stream_schedule()
USB: EHCI: handle isochronous underruns with tasklets
USB: fix substandard locking for the sysfs files
USB: NS_TO_US should round up
USB: EHCI: check the right uframes for CSPLIT
USB: EHCI: compute full-speed bandwidth usage correctly
USB: EHCI: No SSPLIT allowed in uframe 7
USB: EHCI: change toggle only upon successful reset
USB: EHCI: use consistent NO_FRAME value
USB: EHCI: create a "periodic schedule info" struct
USB: EHCI: use a bandwidth-allocation table
USB: add a private-data pointer to struct usb_tt
USB: EHCI: create per-TT bandwidth tables
USB: EHCI: start new isochronous streams ASAP
USB: EHCI: fix type mismatch in check_intr_schedule
USB: EHCI: fix sparse errors
USB: OHCI: fix and explain sparse errors
USB: change dev_warn about missing reset-resume to dev_dbg
USB: EHCI: add check for wakeup/suspend race
USB: UHCI: check for wakeup/suspend race
Alexey Khoroshilov (1):
USB: wusbcore: fix usb_dev leaks
Andreas Larsson (1):
usb: gadget: Make VERBOSE_DEBUG enableable via Kconfig
Andrzej Pietrasiewicz (29):
usb: gadget: configfs: add a method to unregister the gadget
usb: gadget: create a utility module for mass_storage
usb: gadget: f_mass_storage: factor out a header file
usb: gadget: f_mass_storage: add a level of indirection for luns storage
usb: gadget: f_mass_storage: use usb_gstrings_attach
usb: gadget: f_mass_storage: create _fsg_common_free_buffers
usb: gadget: f_mass_storage: make sysfs interface optional
usb: gadget: f_mass_storage: create fsg_common_setup for use in fsg_common_init
usb: gadget: f_mass_storage: create fsg_common_set_num_buffers for use in fsg_common_init
usb: gadget: f_mass_storage: create lun handling helpers for use in fsg_common_init
usb: gadget: f_mass_storage: create fsg_common_set_cdev for use in fsg_common_init
usb: gadget: f_mass_storage: create lun creation helpers for use in fsg_common_init
usb: gadget: f_mass_storage: create fsg_common_set_inquiry_string for use in fsg_common_init
usb: gadget: f_mass_storage: create fsg_common_run_thread for use in fsg_common_init
usb: gadget: f_mass_storage: convert to new function interface with backward compatibility
usb: gadget: mass_storage: convert to new interface of f_mass_storage
usb: gadget: storage_common: make attribute operations more generic
usb: gadget: storage_common: add methods to show/store 'cdrom' and 'removable'
usb: gadget: f_mass_storage: add configfs support
usb: gadget: acm_ms: convert to new interface of f_mass_storage
usb: gadget: multi: convert to new interface of f_ecm
usb: gadget: multi: convert to new interface of f_rndis
usb: gadget: multi: convert to new interface of f_mass_storage
usb: gadget: f_mass_storage: remove compatibility layer
usb: gadget: mass_storage: merge usb_f_mass_storage module with u_ms module
usb: gadget: storage_common: use strtobool instead of kstrtouint
usb: gadget: storage_common: pass filesem to fsg_store_cdrom
usb: gadget: f_mass_storage: style corrections, cleanup & simplification
usb/gadget: f_mass_storage: use string literal as format in dev_set_name
Anton Tikhomirov (10):
usb: phy: Pass OTG FSM pointer to callback functions
usb: phy: Check OTG FSM callback existance in helper functions
usb: phy: Add and use missed helper functions
usb: phy: Fix OTG FSM timer handling
usb: phy: Add and use missed OTG FSM timers
usb: phy: Rename OTG FSM informative variables
usb: phy: Rename "B-device session end SRP" OTG FSM input
usb: phy: Add and use missed OTG FSM inputs/outputs
usb: phy: Reordering of OTG FSM variables
USB: phy: samsung: Support multiple PHYs of same type
Bjorn Helgaas (1):
USB: correct the usb_disconnect() comment about usb_bus_list_lock
Bjørn Mork (1):
usb: cdc-wdm: ignore speed change notifications
Boris BREZILLON (1):
USB: ehci-atmel: add usb_clk for transition to CCF
Dan Carpenter (1):
USB: cyberjack: fix buggy integer overflow test
Dan Williams (3):
usb: hub_activate kill an 'else'
usb: xhci: kill a conditional when toggling cycle
usb: xhci: remove the unused ->address field
Daniel Mack (3):
usb: musb: am35x: use SIMPLE_DEV_PM_OPS
usb: musb: blackfin: use SIMPLE_DEV_PM_OPS
usb: musb: ux500: use SIMPLE_DEV_PM_OPS
Dave Jones (1):
USB: phy: Restrict AM335x PHY driver to only be built on !ARM when COMPILE_TEST is set.
David Cohen (2):
usb: g_ffs: fix compilation warning
usb: g_ffs: fix compilation warning
Deng-Cheng Zhu (2):
USB/host: Use existing macros instead of hard-coded values in uhci-debug.c
USB/host: Bugfix: Return length of copied buffer in uhci_hub_control()
Duan Jiong (1):
usb: gadget: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...))
Fabio Estevam (1):
usb: gadget: udc-core: Do not report -EISNAM error from gadgetfs
Felipe Balbi (1):
usb: dwc3: core: use pm_runtime_put_sync() on remove
Fengguang Wu (2):
usb: pci-quirks: amd_chipset_sb_type_init() can be static
usb: core: usb_amd_resume_quirk() can be static
Gabor Juhos (1):
usb: phy: don't return with NULL from devm_usb_get_phy()
Greg KH (1):
USB: Maintainers change for usb serial drivers
Greg Kroah-Hartman (15):
Merge branch 'master' into usb-next
Revert "Revert "USB: EHCI: support running URB giveback in tasklet context""
Merge 3.12-rc3 into usb-next
Merge 3.12-rc4 into usb-next
Revert "USB: OHCI: Properly handle ohci-spear suspend"
Revert "USB: OHCI: Properly handle ohci-exynos suspend"
Revert "USB: OHCI: Properly handle ohci-ep93xx suspend"
Revert "USB: OHCI: Properly handle ohci-da8xx suspend"
Revert "USB: OHCI: Properly handle ohci-s3c2410 suspend"
Revert "USB: OHCI: Properly handle ohci-at91 suspend"
Revert "USB: OHCI: Properly handle OHCI controller suspend"
Merge 3.12-rc6 into usb-next.
Merge tag 'for-usb-next-2013-10-17' of git://git.kernel.org/.../sarah/xhci into usb-next
Merge tag 'usb-for-v3.13' of git://git.kernel.org/.../balbi/usb into usb-next
UWB: clean up attribute use by using ATTRIBUTE_GROUPS()
Greg Suarez (1):
USB: cdc-wdm: support back-to-back USB_CDC_NOTIFY_RESPONSE_AVAILABLE notifications
H Hartley Sweeten (2):
ARM: ep93xx_defconfig: cleanup ep93xx_defconfig
usb: ohci: remove ep93xx bus glue platform driver
Hans de Goede (3):
usb-core: Make usb_free_streams return an error
usb-anchor: Ensure poisened gets initialized to 0
usb-anchor: Delay usb_wait_anchor_empty_timeout wake up till completion is done
Heikki Krogerus (1):
usb: remove intel_mid_otg.h
Huang Rui (11):
usb: pci-quirks: refactor AMD quirk to abstract AMD chipset types
usb: core: implement AMD remote wakeup quirk
usb: usbtest: bmAttributes would better be masked
usb: usbtest: bmAttributes would better be masked
usb: ehci: use amd_chipset_type to filter for usb subsystem hang bug
usb: ohci: use amd_chipset_type to filter for SB800 prefetch
usb: usbtest: fix checkpatch warning as sizeof code style
usb: usbtest: support bos descriptor test for usb 3.0
usb: usbtest: support usb2 extension descriptor test
usb: usbtest: support superspeed device capbility descriptor test
usb: usbtest: support container id descriptor test
Ivan T. Ivanov (2):
ehci-msm: Remove global struct usb_phy variable
USB: ehci-msm: Add device tree support and binding information
Jingoo Han (13):
USB: ehci-fsl: Remove casting the return value which is a void pointer
usb: gadget: amd5536udc: remove unnecessary pci_set_drvdata()
usb: gadget: goku_udc: remove unnecessary pci_set_drvdata()
usb: gadget: pch_udc: remove unnecessary pci_set_drvdata()
usb: gadget: net2280: remove unnecessary pci_set_drvdata()
USB: ohci-exynos: Add missing usb_put_hcd() to prevent memory leak
ARM: SAMSUNG: Remove unused s5p_device_ehci
USB: ehci-s5p: Remove non-DT support
USB: host: Rename ehci-s5p to ehci-exynos
USB: ohci-exynos: Remove non-DT support
phy: Add driver for Exynos DP PHY
video: exynos_dp: remove non-DT support for Exynos Display Port
video: exynos_dp: Use the generic PHY driver
Joe Perches (3):
usb: Remove unnecessary semicolons
printk: pr_debug_ratelimited: check state first to reduce "callbacks suppressed" messages
usbatm: Fix dynamic_debug / ratelimited atm_dbg and atm_rldbg macros
Johan Hovold (4):
USB: serial: clean up comments in generic driver
USB: serial: add memory flags to usb_serial_generic_write_start
USB: serial: export usb_serial_generic_write_start
USB: mos7840: fix tiocmget error handling
Julius Werner (1):
usb: hub: Clear Port Reset Change during init/resume
Kevin Hilman (1):
USB: OHCI: ohci_init_driver(): sanity check overrides
Kishon Vijay Abraham I (7):
drivers: phy: add generic PHY framework
usb: phy: omap-usb2: use the new generic PHY framework
usb: phy: twl4030: use the new generic PHY framework
arm: omap3: twl: add phy consumer data in twl4030_usb_data
ARM: dts: omap: update usb_otg_hs data
usb: musb: omap2430: use the new generic PHY framework
usb: phy: twl4030-usb: remove *set_suspend* and *phy_init* ops
Linus Walleij (1):
usb: musb: name ux500 platforms more broadly
Manjunath Goudar (21):
USB: EHCI: make ehci-w90X900 a separate driver
USB: OHCI: make ohci-exynos a separate driver
USB: OHCI: make ohci-omap a separate driver
USB: OHCI: make ohci-omap3 a separate driver
USB: OHCI: make ohci-spear a separate driver
USB: OHCI: make ohci-at91 a separate driver
USB: OHCI: make ohci-s3c2410 a separate driver
USB: OHCI: make ohci-nxp a separate driver
USB: OHCI: make ohci-ep93xx a separate driver
USB: OHCI: make ohci-pxa27x a separate driver
USB: OHCI: Properly handle OHCI controller suspend
USB: OHCI: Properly handle ohci-at91 suspend
USB: OHCI: Properly handle ohci-s3c2410 suspend
USB: OHCI: Properly handle ohci-da8xx suspend
USB: OHCI: Properly handle ohci-ep93xx suspend
USB: OHCI: Properly handle ohci-exynos suspend
USB: OHCI: Properly handle ohci-omap suspend
USB: OHCI: Properly handle ohci-platform suspend
USB: OHCI: Properly handle ohci-pxa27x suspend
USB: OHCI: Properly handle ohci-sm501 suspend
USB: OHCI: Properly handle ohci-spear suspend
Mark Brown (1):
usb: phy: nop: Defer clock prepare until PHY init
Mathias Nyman (1):
xhci: Enable LPM support only for hardwired or BESL devices
Matthias Beyer (11):
drivers: usb: core: hcd: moved asterix to variable
drivers: usb: core: hcd: Whitespace fixes
drivers: usb: core: hcd: replaced C99 // comments
drivers: usb: core: hcd: removed braces for return statements
drivers: usb: core: hcd: if-else-braces fixed
drivers: usb: core: hcd.c: converted busmap from struct to bitmap
drivers: usb: core: {file,hub,sysfs,usb}.c: Whitespace fixes
drivers: usb: core: file.c: moved asterisk to variable name
drivers: usb: core: hub.c: Comments shouldnt be C99 // comment style
drivers: usb: core: devio.c: Spaces to tabs for proc_reapurbnonblock()
drivers: usb: core: devio.c: Spaces to tabs for proc_control_compat()
Michael Opdenacker (4):
usb: host: uhci-platform: remove deprecated IRQF_DISABLED
usb: gadget: mv_u3d_core: remove deprecated IRQF_DISABLED
usb: gadget: mv_u3d_core: remove deprecated IRQF_DISABLED
usb/hcd: remove unnecessary local_irq_save
Pali Rohár (2):
usb: musb: Add missing ATOMIC_INIT_NOTIFIER_HEAD
usb: musb: Call atomic_notifier_call_chain when status is changed
Paul Chavent (2):
USB: serial: call handle_dcd_change in ftdi driver.
USB: serial: invoke dcd_change ldisc's handler.
Pavel Machek (1):
usb: gadget: s3c-hsotg: fix CodingStyle issues
Peter Chen (12):
chipidea: udc: free pending TD at removal procedure
usb: host: delete chipidea dependency
usb: chipidea: udc: Consolidate the call of disconnect
usb: chipidea: move platform related things to ci_get_platdata
usb: chipidea: move PHY operation to core
usb: chipidea: imx: remove PHY operations
usb: chipidea: add ci_hdrc_enter_lpm API
usb: gadget: zero: Add flexible auto remote wakeup test method
usb: chipidea: udc: Fix spinlock recursion during bus reset
usb: chipidea: udc: Fix calling spin_lock_irqsave at sleep context
usb: chipidea: host: more enhancement when ci->hcd is NULL
usb: chipidea: only get vbus regulator for non-peripheral mode
Robert Baldyga (13):
usb: gadget: s3c-hsotg: fix maxpacket size
usb: gadget: s3c-hsotg: fix set_ep_maxpacket function
usb: gadget: s3c-hsotg: add isochronous transfers support
usb: gadget: s3c-hsotg: add multi count support
usb: gadget: s3c-hsotg: remove unused label
usb: gadget: s3c-hsotg: fix "protocol stall" handling
usb: gadget: s3c-hsotg: fix s3c_hsotg_write_fifo function for dedicated fifo mode
usb: gadget: s3c-hsotg: fix endpoint interrupts handling
usb: gadget: s3c-hsotg: add DAINT masking
usb: gadget: s3c-hsotg: fix "halted" property updating
usb: gadget: s3c-hsotg: fix clear feature ENDPOINT_HALT
usb: gadget: s3c-hsotg: fix interrupt configuration in dedicated-fifo mode
usb: gadget: s3c-hsotg: fix can_write limit for non-periodic endpoints
Roger Quadros (12):
usb: phy: omap-control: Get rid of platform data
usb: phy: omap: Add new device types and remove omap_control_usb3_phy_power()
usb: phy: omap-usb2: Don't use omap_get_control_dev()
usb: phy: omap-usb3: Don't use omap_get_control_dev()
usb: musb: omap2430: Don't use omap_get_control_dev()
usb: phy: omap: get rid of omap_get_control_dev()
ARM: dts: omap4: update omap-control-usb nodes
ARM: dts: omap5: update omap-control-usb node
usb: phy: generic: Add gpio_reset to platform data
usb: phy: generic: Don't use regulator framework for RESET line
ARM: OMAP2+: omap-usb-host: Get rid of platform_data from struct usbhs_phy_data
ARM: OMAP2+: usb-host: Adapt to USB phy-nop RESET line changes
Rui li (1):
USB：add new zte 3g-dongle's pid to option.c
Russell King (1):
usb: musb: use platform_device_register_full() to avoid directly messing with dma masks
Sachin Kamat (10):
usb: dwc3: Remove redundant pci_set_drvdata
usb: gadget: Remove redundant pci_set_drvdata
usb: dwc3: Remove redundant pci_set_drvdata
usb: musb_dsps: Remove redundant of_match_ptr
usb: phy: am335x-control: Remove redundant of_match_ptr
usb: phy: am335x: Remove redundant of_match_ptr
usb: phy: tegra-usb: Remove redundant of_match_ptr
usb: musb_am335x: Remove redundant of_match_ptr
usb: xhci: Staticize xhci_del_comp_mod_timer
usb: phy: twl6030-usb: Include linux/of.h header
Sarah Sharp (4):
usb: Disable USB 2.0 Link PM before device reset.
xhci: Set L1 device slot on USB2 LPM enable/disable.
usb: Don't enable USB 2.0 Link PM by default.
usb: Push USB2 LPM disable on disconnect into USB core.
Sebastian Andrzej Siewior (10):
usb: phy: am335x: add wakeup support
usb: musb: cancel work on removal
usb: musb: call musb_start() only once in OTG mode
usb: musb: dsps: move try_idle to start hook
usb: musb: dsps: remove declartion for dsps_musb_try_idle()
usb: musb: dsps: redo the otg timer
usb: musb: dsps: run the timer only on OTG systems
usb: musb: core: properly free host / device structs in err path
usb: musb: core: Call dma_controller_destroy() in error path only once.
usb: musb: cppi41: allow to defer probing if DMA isn't yet available
Sergei Shtylyov (1):
usb: musb: davinci: fix resources passed to MUSB driver for DM6467
Sylwester Nawrocki (5):
phy: Add driver for Exynos MIPI CSIS/DSIM DPHYs
exynos4-is: Use the generic MIPI CSIS PHY driver
video: exynos_mipi_dsim: Use the generic PHY driver
ARM: Samsung: Remove the MIPI PHY setup code
phy: exynos-mipi-video: Fix phy_power_off() callback
Thomas Pugliese (22):
usb: wusbcore: rename urb to tr_urb in struct wa_seg
usb: wusbcore: rename fields in struct wahc
usb: wusbcore: allow wa_xfer_destroy to clean up partially constructed xfers
usb: wusbcore: resource cleanup fix in __wa_xfer_setup_segs
usb: wusbcore: clean up the sg list that was created for out transfers
usb: wusbcore: set pointers to NULL after freeing in error cases
usb: wusbcore: fix endianess issues when using dwTransferID
usb: wusbcore: include the xfer_id in debug prints
usb: wusbcore: clean up urb dequeue process
usb: wusbcore: fix build warning on 64-bit builds
usb: wusbcore: avoid stack overflow in URB enqueue error path
usb: wusbcore: implement hwahc_op_get_frame_number
usb: wusbcore: set the RPIPE bOverTheAirInterval for isoc endpoints
usb: wusbcore: Add isoc transfer type enum and packet definitions
usb: wusbcore: add support for isoc out transfers
usb: wusbcore: fix string formatting warnings on 64-bit builds
usb: wusbcore: serialize access to the HWA data out endpoint
usb: wusbcore: preserve endianness of cached descriptors
usb: wusbcore: set the RPIPE wMaxPacketSize value correctly
usb: wusbcore: combine multiple isoc frames in a single transfer request.
usb: wusbcore: add a quirk for Alereon HWA device isoc behavior
usb: wusbcore: change WA_SEGS_MAX to a legal value
Tim Deegan (1):
USB: ehci-dbgp: drop dead code.
Tom Gundersen (1):
usb: ohci/uhci - add soft dependencies on ehci_pci
Valentin Ilie (1):
usb: gadget: mv_u3d_core: fix memory leaks
Valentine Barshak (1):
usb: phy: Add RCAR Gen2 USB phy
Vivek Gautam (1):
usb: dwc3: Remove additional delay of 100ms when resuming
Wei Yongjun (2):
USB: WUSBCORE: use list_move_tail instead of list_del/list_add_tail
USB: EHCI: tegra: drop clk_put for devm_clk_get in tegra_ehci_probe()
Xenia Ragiadakou (20):
usbcore: set lpm_capable field for LPM capable root hubs
usbcore: fix incorrect type in assignment in usb_set_lpm_parameters()
usbcore: fix read of usbdevfs_ctrltransfer fields in proc_control()
xhci: remove unused argument from xhci_giveback_urb_in_irq()
xhci: rename existing Command Completion Event handlers
xhci: refactor TRB_ENABLE_SLOT case into function
xhci: refactor TRB_DISABLE_SLOT case into function
xhci: refactor TRB_ADDR_DEV case into function
xhci: use completion event's slot id rather than dig it out of command
xhci: refactor TRB_RESET_DEV case into function
xhci: refactor TRB_NEC_GET_FW case into function
xhci: refactor TRB_EVAL_CONTEXT case into function
xhci: remove unused 'ep_ring' variable in handle_cmd_completion()
xhci: refactor TRB_CONFIG_EP case into function
xhci: add variable 'cmd_comp_code' in handle_cmd_completion()
xhci: add variable 'cmd_trb' in handle_cmd_completion()
xhci: add variable 'cmd_type' in handle_cmd_completion()
xhci: replace 'xhci->cmd_ring->dequeue' with 'trb' in stop_ep cmd handler
xhci: add argument 'slot_id' in stop_ep, set_deq and reset_ep cmd handlers
xhci: replace 'event' with 'cmd_comp_code' in set_deq and reset_ep handlers
xiao jin (1):
xhci: correct the usage of USB_CTRL_SET_TIMEOUT
.../ABI/testing/configfs-usb-gadget-mass-storage | 31 +
.../devicetree/bindings/phy/phy-bindings.txt | 66 +
.../devicetree/bindings/phy/samsung-phy.txt | 22 +
.../devicetree/bindings/usb/msm-hsusb.txt | 17 +
Documentation/devicetree/bindings/usb/omap-usb.txt | 39 +-
.../devicetree/bindings/usb/usb-nop-xceiv.txt | 7 +-
Documentation/devicetree/bindings/usb/usb-phy.txt | 6 +
.../devicetree/bindings/video/exynos_dp.txt | 17 +-
Documentation/phy.txt | 166 +++
Documentation/pps/pps.txt | 15 +
MAINTAINERS | 61 +-
arch/arm/boot/dts/omap3-beagle-xm.dts | 2 +
arch/arm/boot/dts/omap3-evm.dts | 2 +
arch/arm/boot/dts/omap3-overo.dtsi | 2 +
arch/arm/boot/dts/omap4.dtsi | 23 +-
arch/arm/boot/dts/omap5.dtsi | 20 +-
arch/arm/boot/dts/twl4030.dtsi | 1 +
arch/arm/configs/ep93xx_defconfig | 17 +-
arch/arm/mach-ep93xx/clock.c | 2 +-
arch/arm/mach-ep93xx/core.c | 39 +-
arch/arm/mach-exynos/include/mach/regs-pmu.h | 5 -
arch/arm/mach-omap2/board-omap3beagle.c | 6 -
arch/arm/mach-omap2/twl-common.c | 11 +
arch/arm/mach-omap2/usb-host.c | 18 +-
arch/arm/mach-omap2/usb.h | 1 -
arch/arm/mach-s5pv210/include/mach/regs-clock.h | 4 -
arch/arm/plat-samsung/Kconfig | 10 -
arch/arm/plat-samsung/Makefile | 1 -
arch/arm/plat-samsung/devs.c | 34 -
arch/arm/plat-samsung/include/plat/devs.h | 1 -
arch/arm/plat-samsung/setup-mipiphy.c | 60 -
drivers/Kconfig | 2 +
drivers/Makefile | 2 +
drivers/media/platform/exynos4-is/Kconfig | 2 +-
drivers/media/platform/exynos4-is/mipi-csis.c | 13 +-
drivers/phy/Kconfig | 54 +
drivers/phy/Makefile | 9 +
drivers/phy/phy-core.c | 698 +++++++++++
drivers/phy/phy-exynos-dp-video.c | 111 ++
drivers/phy/phy-exynos-mipi-video.c | 176 +++
drivers/{usb => }/phy/phy-omap-usb2.c | 72 +-
drivers/{usb => }/phy/phy-twl4030-usb.c | 71 +-
drivers/usb/atm/usbatm.h | 14 +-
drivers/usb/chipidea/bits.h | 1 +
drivers/usb/chipidea/ci_hdrc_imx.c | 21 +-
drivers/usb/chipidea/core.c | 123 +-
drivers/usb/chipidea/host.c | 6 +-
drivers/usb/chipidea/udc.c | 56 +-
drivers/usb/class/cdc-wdm.c | 42 +-
drivers/usb/core/devio.c | 38 +-
drivers/usb/core/driver.c | 7 +-
drivers/usb/core/file.c | 8 +-
drivers/usb/core/hcd-pci.c | 3 +
drivers/usb/core/hcd.c | 122 +-
drivers/usb/core/hub.c | 182 +--
drivers/usb/core/message.c | 4 +
drivers/usb/core/quirks.c | 37 +
drivers/usb/core/sysfs.c | 64 +-
drivers/usb/core/urb.c | 44 +-
drivers/usb/core/usb.c | 2 +-
drivers/usb/core/usb.h | 1 +
drivers/usb/dwc3/core.c | 3 +-
drivers/usb/dwc3/dwc3-pci.c | 2 -
drivers/usb/dwc3/ep0.c | 6 +-
drivers/usb/early/ehci-dbgp.c | 4 -
drivers/usb/gadget/Kconfig | 34 +-
drivers/usb/gadget/Makefile | 5 +-
drivers/usb/gadget/acm_ms.c | 125 +-
drivers/usb/gadget/amd5536udc.c | 2 -
drivers/usb/gadget/composite.c | 2 +-
drivers/usb/gadget/configfs.c | 10 +-
drivers/usb/gadget/configfs.h | 6 +
drivers/usb/gadget/dummy_hcd.c | 6 +-
drivers/usb/gadget/f_mass_storage.c | 1254 ++++++++++++++-----
drivers/usb/gadget/f_mass_storage.h | 166 +++
drivers/usb/gadget/g_ffs.c | 2 +
drivers/usb/gadget/goku_udc.c | 3 +-
drivers/usb/gadget/mass_storage.c | 125 +-
drivers/usb/gadget/multi.c | 247 +++-
drivers/usb/gadget/mv_u3d_core.c | 4 +-
drivers/usb/gadget/net2280.c | 5 +-
drivers/usb/gadget/pch_udc.c | 1 -
drivers/usb/gadget/rndis.c | 2 +-
drivers/usb/gadget/s3c-hsotg.c | 167 ++-
drivers/usb/gadget/storage_common.c | 430 ++-----
drivers/usb/gadget/storage_common.h | 229 ++++
drivers/usb/gadget/tcm_usb_gadget.c | 4 +-
drivers/usb/gadget/udc-core.c | 3 +-
drivers/usb/gadget/zero.c | 25 +-
drivers/usb/host/Kconfig | 59 +-
drivers/usb/host/Makefile | 11 +-
drivers/usb/host/ehci-atmel.c | 16 +-
drivers/usb/host/ehci-dbg.c | 113 +-
drivers/usb/host/{ehci-s5p.c => ehci-exynos.c} | 164 ++-
drivers/usb/host/ehci-fsl.c | 4 +-
drivers/usb/host/ehci-grlib.c | 2 +-
drivers/usb/host/ehci-hcd.c | 42 +-
drivers/usb/host/ehci-mem.c | 4 +-
drivers/usb/host/ehci-msm.c | 20 +-
drivers/usb/host/ehci-mv.c | 2 +-
drivers/usb/host/ehci-octeon.c | 2 +-
drivers/usb/host/ehci-pci.c | 24 +-
drivers/usb/host/ehci-pmcmsp.c | 2 +-
drivers/usb/host/ehci-ppc-of.c | 2 +-
drivers/usb/host/ehci-ps3.c | 2 +-
drivers/usb/host/ehci-q.c | 64 +-
drivers/usb/host/ehci-sched.c | 1033 +++++++++-------
drivers/usb/host/ehci-sead3.c | 2 +-
drivers/usb/host/ehci-sh.c | 2 +-
drivers/usb/host/ehci-sysfs.c | 15 +-
drivers/usb/host/ehci-tegra.c | 4 +-
drivers/usb/host/ehci-tilegx.c | 2 +-
drivers/usb/host/ehci-w90x900.c | 89 +-
drivers/usb/host/ehci-xilinx-of.c | 2 +-
drivers/usb/host/ehci.h | 81 +-
drivers/usb/host/fotg210-hcd.c | 2 +-
drivers/usb/host/fusbh200-hcd.c | 2 +-
drivers/usb/host/hwa-hc.c | 33 +-
drivers/usb/host/isp1362-hcd.c | 2 +-
drivers/usb/host/ohci-at91.c | 156 ++-
drivers/usb/host/ohci-dbg.c | 2 +-
drivers/usb/host/ohci-ep93xx.c | 184 ---
drivers/usb/host/ohci-exynos.c | 184 ++-
drivers/usb/host/ohci-hcd.c | 159 +--
drivers/usb/host/ohci-hub.c | 9 +-
drivers/usb/host/ohci-nxp.c | 123 +-
drivers/usb/host/ohci-omap.c | 169 +--
drivers/usb/host/ohci-omap3.c | 118 +-
drivers/usb/host/ohci-pci.c | 15 +-
drivers/usb/host/ohci-platform.c | 11 +-
drivers/usb/host/ohci-pxa27x.c | 249 ++--
drivers/usb/host/ohci-s3c2410.c | 128 +-
drivers/usb/host/ohci-sm501.c | 11 +-
drivers/usb/host/ohci-spear.c | 140 +--
drivers/usb/host/pci-quirks.c | 137 ++-
drivers/usb/host/pci-quirks.h | 2 +
drivers/usb/host/sl811-hcd.c | 4 +-
drivers/usb/host/uhci-debug.c | 16 +-
drivers/usb/host/uhci-hub.c | 40 +-
drivers/usb/host/uhci-pci.c | 19 +-
drivers/usb/host/uhci-platform.c | 3 +-
drivers/usb/host/whci/hcd.c | 4 +-
drivers/usb/host/xhci-hub.c | 5 +-
drivers/usb/host/xhci-mem.c | 10 -
drivers/usb/host/xhci-ring.c | 324 ++---
drivers/usb/host/xhci.c | 182 +--
drivers/usb/host/xhci.h | 3 +-
drivers/usb/misc/usbtest.c | 172 ++-
drivers/usb/musb/Kconfig | 5 +-
drivers/usb/musb/am35x.c | 63 +-
drivers/usb/musb/blackfin.c | 13 +-
drivers/usb/musb/da8xx.c | 49 +-
drivers/usb/musb/davinci.c | 59 +-
drivers/usb/musb/musb_am335x.c | 2 +-
drivers/usb/musb/musb_core.c | 19 +-
drivers/usb/musb/musb_core.h | 2 +
drivers/usb/musb/musb_cppi41.c | 8 +-
drivers/usb/musb/musb_dsps.c | 96 +-
drivers/usb/musb/musb_gadget.c | 2 +-
drivers/usb/musb/musb_host.c | 2 +-
drivers/usb/musb/musb_virthub.c | 19 +-
drivers/usb/musb/omap2430.c | 54 +-
drivers/usb/musb/tusb6010.c | 49 +-
drivers/usb/musb/ux500.c | 13 +-
drivers/usb/phy/Kconfig | 35 +-
drivers/usb/phy/Makefile | 3 +-
drivers/usb/phy/phy-am335x-control.c | 44 +-
drivers/usb/phy/phy-am335x.c | 44 +-
drivers/usb/phy/phy-fsl-usb.c | 96 +-
drivers/usb/phy/phy-fsl-usb.h | 4 +-
drivers/usb/phy/phy-fsm-usb.c | 72 +-
drivers/usb/phy/phy-fsm-usb.h | 179 ++-
drivers/usb/phy/phy-generic.c | 108 +-
drivers/usb/phy/phy-generic.h | 7 +-
drivers/usb/phy/phy-omap-control.c | 208 ++--
drivers/usb/phy/phy-omap-usb3.c | 32 +-
drivers/usb/phy/phy-rcar-gen2-usb.c | 248 ++++
drivers/usb/phy/phy-samsung-usb2.c | 3 +-
drivers/usb/phy/phy-samsung-usb3.c | 3 +-
drivers/usb/phy/phy-tegra-usb.c | 2 +-
drivers/usb/phy/phy-twl6030-usb.c | 1 +
drivers/usb/phy/phy-ulpi-viewport.c | 2 +-
drivers/usb/phy/phy.c | 2 +-
drivers/usb/serial/cyberjack.c | 2 +-
drivers/usb/serial/ftdi_sio.c | 10 +-
drivers/usb/serial/generic.c | 82 +-
drivers/usb/serial/mos7840.c | 4 +
drivers/usb/serial/option.c | 17 +
drivers/usb/wusbcore/cbaf.c | 7 +-
drivers/usb/wusbcore/devconnect.c | 2 +-
drivers/usb/wusbcore/wa-hc.c | 18 +-
drivers/usb/wusbcore/wa-hc.h | 42 +-
drivers/usb/wusbcore/wa-rpipe.c | 22 +-
drivers/usb/wusbcore/wa-xfer.c | 1261 +++++++++++++++-----
drivers/uwb/lc-dev.c | 16 +-
drivers/video/exynos/Kconfig | 3 +-
drivers/video/exynos/exynos_dp_core.c | 132 +-
drivers/video/exynos/exynos_dp_core.h | 110 ++
drivers/video/exynos/exynos_dp_reg.c | 2 -
drivers/video/exynos/exynos_mipi_dsi.c | 19 +-
include/linux/i2c/twl.h | 2 +
include/linux/phy/phy.h | 270 +++++
include/linux/platform_data/mipi-csis.h | 9 -
include/linux/platform_data/usb-ehci-s5p.h | 21 -
include/linux/platform_data/usb-ohci-exynos.h | 21 -
include/linux/platform_data/usb-rcar-gen2-phy.h | 22 +
include/linux/printk.h | 16 +-
include/linux/usb.h | 10 +-
include/linux/usb/hcd.h | 16 +-
include/linux/usb/intel_mid_otg.h | 180 ---
include/linux/usb/musb.h | 2 -
include/linux/usb/omap_control_usb.h | 33 +-
include/linux/usb/serial.h | 2 +
include/linux/usb/usb_phy_gen_xceiv.h | 3 +-
include/linux/usb/wusb-wa.h | 51 +-
include/video/exynos_dp.h | 131 --
include/video/exynos_mipi_dsim.h | 5 +-
217 files changed, 9035 insertions(+), 5000 deletions(-)
create mode 100644 Documentation/ABI/testing/configfs-usb-gadget-mass-storage
create mode 100644 Documentation/devicetree/bindings/phy/phy-bindings.txt
create mode 100644 Documentation/devicetree/bindings/phy/samsung-phy.txt
create mode 100644 Documentation/devicetree/bindings/usb/msm-hsusb.txt
create mode 100644 Documentation/phy.txt
delete mode 100644 arch/arm/plat-samsung/setup-mipiphy.c
create mode 100644 drivers/phy/Kconfig
create mode 100644 drivers/phy/Makefile
create mode 100644 drivers/phy/phy-core.c
create mode 100644 drivers/phy/phy-exynos-dp-video.c
create mode 100644 drivers/phy/phy-exynos-mipi-video.c
rename drivers/{usb => }/phy/phy-omap-usb2.c (81%)
rename drivers/{usb => }/phy/phy-twl4030-usb.c (94%)
create mode 100644 drivers/usb/gadget/configfs.h
create mode 100644 drivers/usb/gadget/f_mass_storage.h
create mode 100644 drivers/usb/gadget/storage_common.h
rename drivers/usb/host/{ehci-s5p.c => ehci-exynos.c} (55%)
delete mode 100644 drivers/usb/host/ohci-ep93xx.c
create mode 100644 drivers/usb/phy/phy-rcar-gen2-usb.c
create mode 100644 include/linux/phy/phy.h
delete mode 100644 include/linux/platform_data/usb-ehci-s5p.h
delete mode 100644 include/linux/platform_data/usb-ohci-exynos.h
create mode 100644 include/linux/platform_data/usb-rcar-gen2-phy.h
delete mode 100644 include/linux/usb/intel_mid_otg.h
delete mode 100644 include/video/exynos_dp.h
reply other threads:[~2013-11-06 22:58 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131106225314.GA8702@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.