From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Subject: Re: [PATCH 6/7] drm/i915: Optimize gen8_enable|disable_vblank functions
Date: Thu, 7 Nov 2013 15:37:54 +0200 [thread overview]
Message-ID: <20131107133754.GO5986@intel.com> (raw)
In-Reply-To: <1383818746-1199-6-git-send-email-daniel.vetter@ffwll.ch>
On Thu, Nov 07, 2013 at 11:05:45AM +0100, Daniel Vetter wrote:
> Let's cache the IMR value like on other platforms. This is needed to
> implement the underrun reporting since then we'll have two places that
> change the same register at runtime.
This looks OK, so:
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
But I think gen8_de_irq_postinstall() isn't quite right. It'll already
enable and unmask the vblank irqs, even though it should just enable
them, but leave them masked.
>
> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> ---
> drivers/gpu/drm/i915/i915_irq.c | 18 ++++++------------
> 1 file changed, 6 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index d2d678f72486..51966feee5d2 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -2203,17 +2203,14 @@ static int gen8_enable_vblank(struct drm_device *dev, int pipe)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
> unsigned long irqflags;
> - uint32_t imr;
>
> if (!i915_pipe_enabled(dev, pipe))
> return -EINVAL;
>
> spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
> - imr = I915_READ(GEN8_DE_PIPE_IMR(pipe));
> - if ((imr & GEN8_PIPE_VBLANK) == 1) {
> - I915_WRITE(GEN8_DE_PIPE_IMR(pipe), imr & ~GEN8_PIPE_VBLANK);
> - POSTING_READ(GEN8_DE_PIPE_IMR(pipe));
> - }
> + dev_priv->de_irq_mask[pipe] &= ~GEN8_PIPE_VBLANK;
> + I915_WRITE(GEN8_DE_PIPE_IMR(pipe), dev_priv->de_irq_mask[pipe]);
> + POSTING_READ(GEN8_DE_PIPE_IMR(pipe));
> spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
> return 0;
> }
> @@ -2270,17 +2267,14 @@ static void gen8_disable_vblank(struct drm_device *dev, int pipe)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
> unsigned long irqflags;
> - uint32_t imr;
>
> if (!i915_pipe_enabled(dev, pipe))
> return;
>
> spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
> - imr = I915_READ(GEN8_DE_PIPE_IMR(pipe));
> - if ((imr & GEN8_PIPE_VBLANK) == 0) {
> - I915_WRITE(GEN8_DE_PIPE_IMR(pipe), imr | GEN8_PIPE_VBLANK);
> - POSTING_READ(GEN8_DE_PIPE_IMR(pipe));
> - }
> + dev_priv->de_irq_mask[pipe] |= GEN8_PIPE_VBLANK;
> + I915_WRITE(GEN8_DE_PIPE_IMR(pipe), dev_priv->de_irq_mask[pipe]);
> + POSTING_READ(GEN8_DE_PIPE_IMR(pipe));
> spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
> }
>
> --
> 1.8.4.rc3
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
next prev parent reply other threads:[~2013-11-07 13:37 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-07 10:05 [PATCH 1/7] drm/i915: Optimize pipe irq handling on bdw Daniel Vetter
2013-11-07 10:05 ` [PATCH 2/7] drm/i915: Fix up the bdw pipe interrupt enable lists Daniel Vetter
2013-11-07 13:49 ` [PATCH] " Daniel Vetter
2013-11-07 14:00 ` Ville Syrjälä
2013-11-07 10:05 ` [PATCH 3/7] drm/i915: Wire up port A aux channel Daniel Vetter
2013-11-07 13:20 ` Ville Syrjälä
2013-11-07 13:49 ` [PATCH] " Daniel Vetter
2013-11-07 13:59 ` Ville Syrjälä
2013-11-07 10:05 ` [PATCH 4/7] drm/i915: Wire up PCH interrupts for bdw Daniel Vetter
2013-11-07 10:05 ` [PATCH 5/7] drm/i915: Wire up pipe CRC support " Daniel Vetter
2013-11-07 10:05 ` [PATCH 6/7] drm/i915: Optimize gen8_enable|disable_vblank functions Daniel Vetter
2013-11-07 13:37 ` Ville Syrjälä [this message]
2013-11-07 14:31 ` [PATCH 1/2] drm/i915: Mask the vblank interrupt on bdw by default Daniel Vetter
2013-11-07 14:31 ` [PATCH 2/2] drm/i915/bdw: Take render error interrupt out of the mask Daniel Vetter
2013-11-07 14:35 ` [PATCH 1/2] drm/i915: Mask the vblank interrupt on bdw by default Ville Syrjälä
2013-11-07 10:05 ` [PATCH 7/7] drm/i915: Wire up cpu fifo underrun reporting support for bdw Daniel Vetter
2013-11-07 13:08 ` [PATCH 1/7] drm/i915: Optimize pipe irq handling on bdw Ville Syrjälä
2013-11-07 13:45 ` Ville Syrjälä
2013-11-08 7:57 ` Daniel Vetter
[not found] ` <32493_1383921850_527CF8B9_32493_10045_1_20131108075743.GZ14082@phenom.ffwll.local>
2013-11-08 15:25 ` [PATCH] Workaround for flicker with panning on the i830 Thomas Richter
2013-11-08 16:32 ` Daniel Vetter
[not found] ` <32493_1383928311_527D11F3_32493_10984_1_20131108163213.GC14082@phenom.ffwll.local>
2013-11-11 15:33 ` Thomas Richter
2013-11-11 15:43 ` Daniel Vetter
[not found] ` <1565_1384184620_5280FB2C_1565_9181_1_CAKMK7uF2UmKJHvVPrzE7-7A9DQ5JrLHAFnDiuVUDHFU+DoOXww@mail.gmail.com>
2013-11-12 16:41 ` Thomas Richter
2013-11-12 17:22 ` Daniel Vetter
[not found] ` <1565_1384276909_528263AC_1565_19510_1_20131112172217.GB3741@phenom.ffwll.local>
2013-11-13 19:50 ` Thomas Richter
2013-11-13 20:20 ` Daniel Vetter
[not found] ` <26136_1384374018_5283DF02_26136_9623_1_20131113202049.GH7251@phenom.ffwll.local>
2013-11-14 7:14 ` Thomas Richter
2013-11-14 8:21 ` Daniel Vetter
[not found] ` <26136_1384417275_528487FB_26136_12808_1_CAKMK7uEfiAoFutfk=mtqteuV07t5SneGniyXnRet_T3Bs4spRw@mail.gmail.com>
2013-11-14 18:15 ` Thomas Richter
2013-11-14 18:33 ` Daniel Vetter
[not found] ` <26136_1384453961_52851749_26136_18549_1_20131114183308.GI22741@phenom.ffwll.local>
2013-11-15 13:16 ` Workaround for flicker with panning on the i830 - found a way for tiled displays Thomas Richter
2013-11-15 15:41 ` Daniel Vetter
[not found] ` <10422_1384530087_528640A7_10422_3841_1_20131115154159.GU22741@phenom.ffwll.local>
2013-11-15 16:08 ` Thomas Richter
2013-11-15 17:01 ` Thomas Richter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131107133754.GO5986@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=daniel.vetter@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.