From: Andrey Borzenkov <arvidjaar@gmail.com>
To: grub-devel@gnu.org
Subject: Re: UEFI/PXE: couldn't send network packet
Date: Thu, 7 Nov 2013 21:55:38 +0400 [thread overview]
Message-ID: <20131107215538.73da30b2@opensuse.site> (raw)
In-Reply-To: <CADkWibd9Ow+oL3SxDUBeTjWkj4m3j6K_1EvhvYNV=svZOk2PNg@mail.gmail.com>
В Wed, 6 Nov 2013 14:00:24 +0800
Anthony Alba <ascanio.alba7@gmail.com> пишет:
> Hi,
>
> I have hit a Dell UEFI BIOS (PowerEdge R720 with
> Broadcom LAN-on-motherboard 2 x 10GbE 2 x 1GbE) which
> loads GRUB by PXE but GRUB itself hits "error: couldn't send network
> packet" and cannot download grub.cfg.
>
Does autoconfiguration by DHCP succeed?
> GRUB shows 8(!) efinet cards; there are four physical NICs,
> each with 2 mac addresses (one for LAN, one for iSCSI offload).
> This is a Broadcom BCM57800.
>
> However efinet0 efinet1 are given the same mac address
> similarly for efinet2, efinet3 etc etc instead, the mac addresses should
> differ by 1.
>
> The box boots fine with grub-legacy, and an older BIOS/NIC firmware (in
> fact that is how I got it to install). After the BIOS/NIC firmware upgrade
> the problems started.
>
> net_ls_addrs, net_ls_cards net_ls_routes don't look suspicious (except for
> the duplicate mac addresses).
>
> Anthony
next prev parent reply other threads:[~2013-11-07 17:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-06 6:00 UEFI/PXE: couldn't send network packet Anthony Alba
2013-11-07 17:55 ` Andrey Borzenkov [this message]
2013-11-08 11:39 ` Anthony Alba
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131107215538.73da30b2@opensuse.site \
--to=arvidjaar@gmail.com \
--cc=grub-devel@gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.