From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Date: Mon, 11 Nov 2013 22:00:26 +0000 Subject: Re: [lm-sensors] Nuvoton NCT6791D support Message-Id: <20131111220026.GA31323@roeck-us.net> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org On Mon, Nov 11, 2013 at 12:32:24PM -0800, p. stephen w wrote: > that worked. >=20 > I have configured the pwmconfig file, but its not affecting the fans. I > have it in /etc/fancontrol. Do I need to reference it from somewhere els= e? > Here's the file. >=20 >=20 > # Configuration file generated by pwmconfig, changes will be lost > INTERVAL=3D1 > DEVPATH=3Dhwmon1=DEvices/platform/coretemp.0 > hwmon3=DEvices/platform/nct6775.656 > DEVNAME=3Dhwmon1=3Dcoretemp hwmon3=3Dnct6791 > FCTEMPS=3Dhwmon3/device/pwm2=3Dhwmon1/device/temp1_input > hwmon3/device/pwm1=3Dhwmon1/device/temp1_input > FCFANS=3Dhwmon3/device/pwm2=3Dhwmon3/device/fan2_input > hwmon3/device/pwm1=3Dhwmon3/device/fan1_input > MINTEMP=3Dhwmon3/device/pwm2` hwmon3/device/pwm1` > MAXTEMP=3Dhwmon3/device/pwm2` hwmon3/device/pwm1` > MINSTART=3Dhwmon3/device/pwm2E hwmon3/device/pwm1=150 > MINSTOP=3Dhwmon3/device/pwm2@ hwmon3/device/pwm1=140 > MINPWM=3Dhwmon3/device/pwm2E hwmon3/device/pwm1=150 > MAXPWM=3Dhwmon3/device/pwm2%5 hwmon3/device/pwm1%5 >=20 Can you send the output of "grep . /sys/class/hwmon/hwmon3/device/*" ? Reason for asking is that the NCT chips are pretty good with automatic fan control. It should not be necessary to run manual (or script based) fan con= trol at all, unless you need to use a temperature which is not available to the = chip. The CPU temperature is usually available. Thanks, Guenter _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors