All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Heiko Stübner" <heiko@sntech.de>
To: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Beomho Seo <beomho.seo@samsung.com>, Chris Ball <cjb@laptop.org>,
	"linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
	myungjoo.ham@samsung.com
Subject: Re: [PATCH v2] mmc: sdhci-s3c: Use mmc_gpio_request_cd fuction
Date: Mon, 18 Nov 2013 21:03:17 +0100	[thread overview]
Message-ID: <201311182103.17626.heiko@sntech.de> (raw)
In-Reply-To: <5289A257.7090506@samsung.com>

Hi Jaehoon,

Am Montag, 18. November 2013, 06:15:03 schrieb Jaehoon Chung:
> Didn't have Any other comment for this patch?
> If don't have any other comment, i want this patch is submitted at
> mmc-next.
> 
> We had tested this patch with exynos4 series.
> 
> CC'd Heiko.

I don't have access to my s3c2416 machine this week, so I'll be able to test 
this next week at the earliest.

I also found a small spelling mistake below.


Heiko



> 
> Best Regards,
> Jaehoon Chung
> 
> On 11/05/2013 08:48 PM, Beomho Seo wrote:
> > Hello all,
> > 
> > I have revised some issues of v1 revision.
> > This patch used mmc_gpio_request_cd function for detect card from cd-gpio
> > pin. Please give your feedback at that time.
> > 
> > Change from v2 to v1
> > 
> > 	- Remove "return ret;" from "err_req_cd:".
> > 	- Revised sdhci_s3c_remove function.
> > 
> > Subject: [PATCH] mmc: sdhci-s3c: Use mmc_gpio_request_cd function
> > 
> > Include slot-gpio header file.
> > Use mmc_gpio_request_cd function.
> > Remove sehci_s3c_setup_card_detect_gpio/card_detect_thread functions.
		      ^sdhci


> > 
> > Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
> > Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> > ---
> > 
> >  drivers/mmc/host/sdhci-s3c.c |   56
> >  +++++++++++------------------------------- 1 file changed, 14
> >  insertions(+), 42 deletions(-)
> > 
> > diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
> > index 6debda9..d8696d2 100644
> > --- a/drivers/mmc/host/sdhci-s3c.c
> > +++ b/drivers/mmc/host/sdhci-s3c.c
> > @@ -27,6 +27,7 @@
> > 
> >  #include <linux/pm_runtime.h>
> >  
> >  #include <linux/mmc/host.h>
> > 
> > +#include <linux/mmc/slot-gpio.h>
> > 
> >  #include "sdhci-s3c-regs.h"
> >  #include "sdhci.h"
> > 
> > @@ -400,44 +401,6 @@ static void sdhci_s3c_notify_change(struct
> > platform_device *dev, int state)
> > 
> >  	}
> >  
> >  }
> > 
> > -static irqreturn_t sdhci_s3c_gpio_card_detect_thread(int irq, void
> > *dev_id) -{
> > -	struct sdhci_s3c *sc = dev_id;
> > -	int status = gpio_get_value(sc->ext_cd_gpio);
> > -	if (sc->pdata->ext_cd_gpio_invert)
> > -		status = !status;
> > -	sdhci_s3c_notify_change(sc->pdev, status);
> > -	return IRQ_HANDLED;
> > -}
> > -
> > -static void sdhci_s3c_setup_card_detect_gpio(struct sdhci_s3c *sc)
> > -{
> > -	struct s3c_sdhci_platdata *pdata = sc->pdata;
> > -	struct device *dev = &sc->pdev->dev;
> > -
> > -	if (devm_gpio_request(dev, pdata->ext_cd_gpio, "SDHCI EXT CD") == 0) 
{
> > -		sc->ext_cd_gpio = pdata->ext_cd_gpio;
> > -		sc->ext_cd_irq = gpio_to_irq(pdata->ext_cd_gpio);
> > -		if (sc->ext_cd_irq &&
> > -		    request_threaded_irq(sc->ext_cd_irq, NULL,
> > -					 sdhci_s3c_gpio_card_detect_thread,
> > -					 IRQF_TRIGGER_RISING |
> > -					 IRQF_TRIGGER_FALLING |
> > -					 IRQF_ONESHOT,
> > -					 dev_name(dev), sc) == 0) {
> > -			int status = gpio_get_value(sc->ext_cd_gpio);
> > -			if (pdata->ext_cd_gpio_invert)
> > -				status = !status;
> > -			sdhci_s3c_notify_change(sc->pdev, status);
> > -		} else {
> > -			dev_warn(dev, "cannot request irq for card detect\n");
> > -			sc->ext_cd_irq = 0;
> > -		}
> > -	} else {
> > -		dev_err(dev, "cannot request gpio for card detect\n");
> > -	}
> > -}
> > -
> > 
> >  #ifdef CONFIG_OF
> >  static int sdhci_s3c_parse_dt(struct device *dev,
> >  
> >  		struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
> > 
> > @@ -699,8 +662,14 @@ static int sdhci_s3c_probe(struct platform_device
> > *pdev)
> > 
> >  	if (pdata->cd_type == S3C_SDHCI_CD_EXTERNAL && pdata->ext_cd_init)
> >  	
> >  		pdata->ext_cd_init(&sdhci_s3c_notify_change);
> >  	
> >  	if (pdata->cd_type == S3C_SDHCI_CD_GPIO &&
> > 
> > -	    gpio_is_valid(pdata->ext_cd_gpio))
> > -		sdhci_s3c_setup_card_detect_gpio(sc);
> > +	    gpio_is_valid(pdata->ext_cd_gpio)) {
> > +		ret = mmc_gpio_request_cd(host->mmc, pdata->ext_cd_gpio, 0);
> > +		if (ret) {
> > +			dev_err(dev,
> > +				"failed to request card detect gpio\n");
> > +			goto err_req_cd;
> > +		}
> > +	}
> > 
> >  #ifdef CONFIG_PM_RUNTIME
> >  
> >  	if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
> > 
> > @@ -708,6 +677,9 @@ static int sdhci_s3c_probe(struct platform_device
> > *pdev)
> > 
> >  #endif
> >  
> >  	return 0;
> > 
> > + err_req_cd:
> > +	mmc_gpio_free_cd(host->mmc);
> > +
> > 
> >   err_req_regs:
> >  #ifndef CONFIG_PM_RUNTIME
> >  
> >  	clk_disable_unprepare(sc->clk_bus[sc->cur_clk]);
> > 
> > @@ -731,8 +703,8 @@ static int sdhci_s3c_remove(struct platform_device
> > *pdev)
> > 
> >  	if (pdata->cd_type == S3C_SDHCI_CD_EXTERNAL && pdata-
>ext_cd_cleanup)
> >  	
> >  		pdata->ext_cd_cleanup(&sdhci_s3c_notify_change);
> > 
> > -	if (sc->ext_cd_irq)
> > -		free_irq(sc->ext_cd_irq, sc);
> > +	if (pdata->ext_cd_gpio)
> > +		mmc_gpio_free_cd(host->mmc);
> > 
> >  #ifdef CONFIG_PM_RUNTIME
> >  
> >  	if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)


      reply	other threads:[~2013-11-18 20:03 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-05 11:48 [PATCH v2] mmc: sdhci-s3c: Use mmc_gpio_request_cd fuction Beomho Seo
2013-11-18  5:15 ` Jaehoon Chung
2013-11-18 20:03   ` Heiko Stübner [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201311182103.17626.heiko@sntech.de \
    --to=heiko@sntech.de \
    --cc=beomho.seo@samsung.com \
    --cc=cjb@laptop.org \
    --cc=jh80.chung@samsung.com \
    --cc=linux-mmc@vger.kernel.org \
    --cc=myungjoo.ham@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.