From: rjohnston@sgi.com
To: xfs@oss.sgi.com
Cc: Eric Sandeen <sandeen@redhat.com>
Subject: [PATCH V4] xfsprogs: update version for 3.2.0-alpha2
Date: Fri, 22 Nov 2013 12:37:43 -0600 [thread overview]
Message-ID: <20131122183757.113479216@sgi.com> (raw)
In-Reply-To: 20131118150313.940966335@sgi.com
[-- Attachment #1: Type: text/plain, Size: 4027 bytes --]
Update the VERSION, configure.ac and doc/CHANGES file for alpha
release, 3.2.0-alpha2
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
---
V4
Updated doc/CHANGES per suggestions by Eric and Dave.
Added SOB by Eric
diff --git a/VERSION b/VERSION
index f4ab52c..f3b53c1 100644
--- a/VERSION
+++ b/VERSION
@@ -3,5 +3,5 @@
#
PKG_MAJOR=3
PKG_MINOR=2
-PKG_REVISION=0-alpha1
+PKG_REVISION=0-alpha2
PKG_BUILD=1
diff --git a/configure.ac b/configure.ac
index 949dd06..ae17c68 100644
--- a/configure.ac
+++ b/configure.ac
@@ -1,4 +1,4 @@
-AC_INIT([xfsprogs], [3.2.0-alpha1])
+AC_INIT([xfsprogs], [3.2.0-alpha2])
AC_PREREQ(2.50)
AC_CONFIG_AUX_DIR([.])
AC_CONFIG_MACRO_DIR([m4])
diff --git a/doc/CHANGES b/doc/CHANGES
index 5a292d7..95c1d74 100644
--- a/doc/CHANGES
+++ b/doc/CHANGES
@@ -1,6 +1,51 @@
+xfsprogs-3.2.0-alpha2 (19 November 2013)
+ - Alpha release for the purpose of testing the CRC feature in
+ kernels 3.10 and newer.
+ - Enable xfs_db write support and xfs_metadump support for CRC
+ enabled filesystems.
+ - Add directory entry filetype support for non-CRC filesystems.
+ - Remove experimental warnings for CRC filesystems.
+ - Ensure all inodes created by xfs_repair have a proper d_type set.
+ - Fix build on big endian machines.
+ - Properly handle symlinks to devices on various tool commandlines.
+ - Fix xfs_repair's dirty log detection for 4k sector logs, broken
+ in Alpha1.
+ - Fix a potential segfault in xfs_repair when issuing progress
+ reports.
+ - Fix potential xfs_fsr failures when running w/ selinux.
+ - Update config.guess/config.sub for arm64, thanks to Colin Watson.
+ - Stop wasting memory by caching inode structures in xfs_repair -
+ they are never re-used. Thanks to Christoph Hellwig.
+ - Fix several Coverity-found defects, thanks to Li Zhong.
+ - Fix platform_test_xfs_fd to return false on special files which
+ cannot take an xfs ioctl.
+ - Sync up libxfs with kernel code.
+ - Improved xfs_repair performance on large filesystems
+ (always use prefetch and strided AG scanning functionality)
+
+
xfsprogs-3.2.0-alpha1 (26 September 2013)
- - Alpha release for the purpose of testing the CRC feature during the
- v3.12 kernel -rc series.
+ - Alpha release for the purpose of testing the CRC feature in
+ kernels 3.10 and newer.
+ - Remove all vestiges of old, unsupported version 1 directory code.
+ - Add a âreaddirâ command to xfs_io, thanks to Brian Foster.
+ - Fix potential segfault in xfs_repair when creating lost+found.
+ - Zero out unused parts of on-disk superblocks during repair, to
+ avoid metadata verifier failures at runtime.
+ - Add directory entry type support to mkfs.xfs and xfs_db.
+ - Add the icreate transaction to xfs_logprint, and fix continuation
+ transactions.
+ - Add the lseek SEEK_DATA/SEEK_HOLE support into xfs_io.
+ - Print all AGI unlinked buckets in xfs_logprint.
+ - Fix mkfs.xfs ENOSPC with protofile which creates a very large
+ directory.
+ - Fix several Coverity-found defects, thanks to Li Zhong.
+ - Do all file reads in xfs_fsr using O_DIRECT.
+ - Sync up libxfs with kernel code.
+ - Add support for concurrent group and project quota usage on CRC
+ enabled filesystems.
+ - Ensure mkfs creates log sizes that are always large enough for
+ the configured fileystem geometry.
xfsprogs-3.1.11 (8 May 2013)
- Support for relative paths in xfs_quota thanks to Satoru Takeuchi.
@@ -35,8 +80,8 @@ xfsprogs-3.1.11 (8 May 2013)
- Remove unconditional ASSERT(0) in xfs_repair.
- Reduce bb_numrecs in bno/cnt btrees when log consumes all agf space.
- Add depraction message for xfs_check.
- - xfs_quota allow user or group names beginning with digits reported by
- James Carter.
+ - xfs_quota allow user or group names beginning with digits reported
+ by James Carter.
- Fix manpages and usage() spelling, errors and omissions.
- Validate the extent count is at least within the positive
range of a signed 32 bit integer before using it.
[-- Attachment #2: Type: text/plain, Size: 121 bytes --]
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2013-11-22 18:43 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-18 15:03 [patch 1/1] xfsprogs: update version for 3.2.0-alpha2 rjohnston
2013-11-18 15:11 ` Christoph Hellwig
2013-11-18 15:41 ` Rich Johnston
2013-11-18 22:53 ` Dave Chinner
2013-11-19 17:01 ` [PATCH V2] " rjohnston
2013-11-19 17:21 ` Christoph Hellwig
2013-11-19 17:14 ` [PATCH V3] " rjohnston
2013-11-21 3:49 ` Eric Sandeen
2013-11-21 3:58 ` Rich Johnston
2013-11-21 16:27 ` Eric Sandeen
2013-11-22 18:37 ` rjohnston [this message]
2013-11-22 19:04 ` [PATCH V4] " Rich Johnston
2013-11-22 21:09 ` Eric Sandeen
2013-11-25 14:42 ` Rich Johnston
2013-11-25 14:54 ` Christoph Hellwig
2013-11-25 15:00 ` Rich Johnston
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131122183757.113479216@sgi.com \
--to=rjohnston@sgi.com \
--cc=sandeen@redhat.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.