Re: [PATCH v3 3/3] usb: s3c-hsotg: Use the new Exynos USB phy driver with the generic phy framework

[Matt Porter <matt.porter@linaro.org>]

On Tue, Nov 05, 2013 at 05:13:21PM +0100, Kamil Debski wrote:
> Change the used phy driver to the new Exynos USB phy driver that uses the
> generic phy framework.
> 
> Signed-off-by: Kamil Debski <k.debski@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
>  drivers/usb/gadget/s3c-hsotg.c |   12 +++++++-----
>  1 file changed, 7 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
> index bb31262..dc7f20c 100644
> --- a/drivers/usb/gadget/s3c-hsotg.c
> +++ b/drivers/usb/gadget/s3c-hsotg.c
> @@ -31,6 +31,7 @@
>  #include <linux/regulator/consumer.h>
>  #include <linux/of.h>
>  #include <linux/of_platform.h>
> +#include <linux/phy/phy.h>
>  
>  #include <linux/usb/ch9.h>
>  #include <linux/usb/gadget.h>
> @@ -162,7 +163,7 @@ struct s3c_hsotg_ep {
>  struct s3c_hsotg {
>  	struct device		 *dev;
>  	struct usb_gadget_driver *driver;
> -	struct usb_phy		*phy;
> +	struct phy		 *phy;
>  	struct s3c_hsotg_plat	 *plat;
>  
>  	spinlock_t              lock;
> @@ -2905,9 +2906,10 @@ static void s3c_hsotg_phy_enable(struct s3c_hsotg *hsotg)
>  	dev_dbg(hsotg->dev, "pdev 0x%p\n", pdev);
>  
>  	if (hsotg->phy)
> -		usb_phy_init(hsotg->phy);
> +		phy_power_on(hsotg->phy);
>  	else if (hsotg->plat->phy_init)
>  		hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
> +

Stray whitespace

>  }
>  
>  /**
> @@ -2922,7 +2924,7 @@ static void s3c_hsotg_phy_disable(struct s3c_hsotg *hsotg)
>  	struct platform_device *pdev = to_platform_device(hsotg->dev);
>  
>  	if (hsotg->phy)
> -		usb_phy_shutdown(hsotg->phy);
> +		phy_power_off(hsotg->phy);
>  	else if (hsotg->plat->phy_exit)
>  		hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
>  }
> @@ -3529,7 +3531,7 @@ static void s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg)
>  static int s3c_hsotg_probe(struct platform_device *pdev)
>  {
>  	struct s3c_hsotg_plat *plat = dev_get_platdata(&pdev->dev);
> -	struct usb_phy *phy;
> +	struct phy *phy;
>  	struct device *dev = &pdev->dev;
>  	struct s3c_hsotg_ep *eps;
>  	struct s3c_hsotg *hsotg;
> @@ -3544,7 +3546,7 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
>  		return -ENOMEM;
>  	}
>  
> -	phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
> +	phy = devm_phy_get(&pdev->dev, "device");

A more descriptive string would be useful here IMHO. Since this is USB
2.0 IP, perhaps "usb2-phy" like musb uses.

	phy-names = "usb2-phy";

looks far more unique than

	phy-names = "device";

in the dts.

Also, this has impact on the samsung-hsotg.txt binding. It should be
updated to reflect the required generic phy properties that will be
used when booting from DT:

	- phys: phy provider specifier
	- phy-names: shall be "device" 

[or "usb2-phy" if the above suggestion is adopted]

I've rebased my BCM281xx UDC series [1] against this s3c-hsotg generic
phy support and it's working fine. I do add phy_init/phy_exit support
which is probably better coming in with my series as my phy driver
makes use of the init method.

Tested-by: Matt Porter <matt.porter@linaro.org>

-Matt

[1] http://www.kernelhub.org/?msg=367354&p=2