All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dave Chinner <david@fromorbit.com>
To: Zhi Yong Wu <zwu.kernel@gmail.com>
Cc: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>, xfs@oss.sgi.com
Subject: Re: [RFC PATCH 4/4] xfs: allow linkat() on O_TMPFILE files
Date: Tue, 26 Nov 2013 08:46:11 +1100	[thread overview]
Message-ID: <20131125214611.GI8803@dastard> (raw)
In-Reply-To: <1385379154-3802-5-git-send-email-zwu.kernel@gmail.com>

On Mon, Nov 25, 2013 at 07:32:34PM +0800, Zhi Yong Wu wrote:
> From: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
> 
> Enable O_TMPFILE support in linkat().
> 
> http://oss.sgi.com/archives/xfs/2013-08/msg00341.html
> 
> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
> ---
>  fs/xfs/xfs_inode.c      |   23 +++++++++++++++++++++--
>  fs/xfs/xfs_trans_resv.c |   13 +++++++++++++
>  fs/xfs/xfs_trans_resv.h |    2 ++
>  3 files changed, 36 insertions(+), 2 deletions(-)
> 
> diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
> index e1832de..7ab029b 100644
> --- a/fs/xfs/xfs_inode.c
> +++ b/fs/xfs/xfs_inode.c
> @@ -62,6 +62,8 @@ kmem_zone_t *xfs_inode_zone;
>  
>  STATIC int xfs_iflush_int(xfs_inode_t *, xfs_buf_t *);
>  
> +STATIC int xfs_iunlink_remove(xfs_trans_t *, xfs_inode_t *);
> +
>  /*
>   * helper function to extract extent size hint from inode
>   */
> @@ -1119,7 +1121,9 @@ xfs_bumplink(
>  {
>  	xfs_trans_ichgtime(tp, ip, XFS_ICHGTIME_CHG);
>  
> -	ASSERT(ip->i_d.di_nlink > 0);
> +	if ((VFS_I(ip)->i_nlink == 0) &&
> +	    !(VFS_I(ip)->i_state & I_LINKABLE))
> +		ASSERT(ip->i_d.di_nlink > 0);
>  	ip->i_d.di_nlink++;
>  	inc_nlink(VFS_I(ip));
>  	if ((ip->i_d.di_version == 1) &&
> @@ -1473,6 +1477,7 @@ xfs_link(
>  {
>  	xfs_mount_t		*mp = tdp->i_mount;
>  	xfs_trans_t		*tp;
> +	struct xfs_trans_res	*tres;
>  	int			error;
>  	xfs_bmap_free_t         free_list;
>  	xfs_fsblock_t           first_block;
> @@ -1498,7 +1503,14 @@ xfs_link(
>  	tp = xfs_trans_alloc(mp, XFS_TRANS_LINK);
>  	cancel_flags = XFS_TRANS_RELEASE_LOG_RES;
>  	resblks = XFS_LINK_SPACE_RES(mp, target_name->len);
> -	error = xfs_trans_reserve(tp, &M_RES(mp)->tr_link, resblks, 0);
> +
> +	if ((VFS_I(sip)->i_nlink == 0) &&
> +	    (VFS_I(sip)->i_state & I_LINKABLE))
> +		tres = &M_RES(mp)->tr_link_tmpfile;
> +	else
> +		tres = &M_RES(mp)->tr_link;
> +
> +	error = xfs_trans_reserve(tp, tres, resblks, 0);

Uggh. For the small amount of extra space needed for the unlinked
list reservation, I would simply add it to the tr_link reservation
and be done with it. That gets rid of the need for the noise here.

>  	if (error == ENOSPC) {
>  		resblks = 0;
>  		error = xfs_trans_reserve(tp, &M_RES(mp)->tr_link, 0, 0);
> @@ -1530,6 +1542,13 @@ xfs_link(
>  
>  	xfs_bmap_init(&free_list, &first_block);
>  
> +	if ((VFS_I(sip)->i_nlink == 0) &&
> +	    (VFS_I(sip)->i_state & I_LINKABLE)) {
> +		error = xfs_iunlink_remove(tp, sip);
> +		if (error)
> +			goto abort_return;
> +	}
> +
>  	error = xfs_dir_createname(tp, tdp, target_name, sip->i_ino,
>  					&first_block, &free_list, resblks);
>  	if (error)
> diff --git a/fs/xfs/xfs_trans_resv.c b/fs/xfs/xfs_trans_resv.c
> index f1eebe4..7c1234e 100644
> --- a/fs/xfs/xfs_trans_resv.c
> +++ b/fs/xfs/xfs_trans_resv.c
> @@ -228,6 +228,15 @@ xfs_calc_link_reservation(
>  				      XFS_FSB_TO_B(mp, 1))));
>  }
>  
> +STATIC uint
> +xfs_calc_link_tmpfile_reservation(
> +	struct xfs_mount        *mp)
> +{
> +	return xfs_calc_link_reservation(mp) +
> +		xfs_calc_buf_res(2, XFS_FSB_TO_B(mp, 1)) +
> +		xfs_calc_buf_res(2, mp->m_sb.sb_sectsize);
> +}

As per above, fold this into xfs_calc_link_reservation() by adding a:


		+ xfs_calc_iunlink_remove_resv(mp);

to the end of it.  Then you can also modify
xfs_calc_ifree_reservation() to use the same
xfs_calc_iunlink_remove_resv() function as well.

[ And similarly, looking back on the previous patch
xfs_calc_iunlink_add_resv can be used in xfs_calc_remove_reservation
so all the unlinked list manipulations are covered by the same
reservation calculations. ]

Cheers,

Dave.
-- 
Dave Chinner
david@fromorbit.com

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

  parent reply	other threads:[~2013-11-25 21:46 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-25 11:32 [RFC PATCH 0/4] xfs: add O_TMPFILE support Zhi Yong Wu
2013-11-25 11:32 ` [RFC PATCH 1/4] xfs: adjust the interface of xfs_qm_vop_dqalloc() Zhi Yong Wu
2013-11-25 13:43   ` Christoph Hellwig
2013-11-28  1:43     ` Zhi Yong Wu
2013-11-25 11:32 ` [RFC PATCH 2/4] xfs: add xfs_create_tmpfile() for O_TMPFILE support Zhi Yong Wu
2013-11-25 13:48   ` Christoph Hellwig
2013-11-28  1:48     ` Zhi Yong Wu
2013-11-25 21:36   ` Dave Chinner
2013-11-26  5:59     ` Christoph Hellwig
2013-11-28  2:41     ` Zhi Yong Wu
2013-11-25 11:32 ` [RFC PATCH 3/4] xfs: add a new method xfs_vn_tmpfile() Zhi Yong Wu
2013-11-25 13:48   ` Christoph Hellwig
2013-11-28  2:20     ` Zhi Yong Wu
2013-11-25 11:32 ` [RFC PATCH 4/4] xfs: allow linkat() on O_TMPFILE files Zhi Yong Wu
2013-11-25 13:51   ` Christoph Hellwig
2013-11-28  2:37     ` Zhi Yong Wu
2013-11-28 10:39       ` Christoph Hellwig
2013-11-28 10:47         ` Zhi Yong Wu
2013-11-25 21:46   ` Dave Chinner [this message]
2013-11-28  2:28     ` Zhi Yong Wu
2013-12-13 11:34     ` Zhi Yong Wu
2013-12-13 16:31       ` Christoph Hellwig
2013-11-28 10:35 ` [RFC PATCH 0/4] xfs: add O_TMPFILE support Christoph Hellwig
2013-11-28 10:50   ` Zhi Yong Wu
2013-11-28 14:39     ` Christoph Hellwig

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20131125214611.GI8803@dastard \
    --to=david@fromorbit.com \
    --cc=wuzhy@linux.vnet.ibm.com \
    --cc=xfs@oss.sgi.com \
    --cc=zwu.kernel@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.