From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Wunderlich Date: Fri, 29 Nov 2013 18:59:22 +0100 Subject: [ath9k-devel] QCA9558 problems for MCS 14/15 In-Reply-To: <2181811.LVWW2rjzYF@bentobox> References: <201311221657.04880.simon@open-mesh.com> <2181811.LVWW2rjzYF@bentobox> Message-ID: <201311291859.22303.sw@simonwunderlich.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org > On Saturday 23 November 2013 10:37:46 Thomas H?hn wrote: > > You said that even manually setting MC14 or MC15 as static rate fails. So > > seems that it is not an issue at the mac layer rather than the phy layer. > > I had once something similar on ath5k, where the power curves got not > > properly assigned to high rates. So just in case, could you check if > > those two high rates do work if you lower the global transmit power to > > 12 dBm ? > > Thanks for the input. This was tested quite early in the process with > 5/10/15/20 dBm and didn't seem to affect the throughput in a positive way. Anyone any other ideas? :) Today we've tried another round of the latest OpenWRT + pending patches from the ath9k mailing list, but still no change. We'd appreciate your ideas a lot. :) Thanks, Simon