All of lore.kernel.org
 help / color / mirror / Atom feed
From: steve.capper@linaro.org (Steve Capper)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/3] Simplify set_huge_pte_at, pte_same for LPAE
Date: Tue, 3 Dec 2013 13:46:24 +0000	[thread overview]
Message-ID: <20131203134623.GA24994@linaro.org> (raw)
In-Reply-To: <1384882529-28104-1-git-send-email-steve.capper@linaro.org>

On Tue, Nov 19, 2013 at 05:35:26PM +0000, Steve Capper wrote:
> Hello,
> The following patch series is my attempt at fixing a rather nasty bug
> which became visible in 3.12-rc1 when running the libhugetlbfs test
> suite. (This problem only just came to my attention yesterday).
> 
> For LPAE, set_huge_pte_at calls set_pte_at which then calls
> set_pte_ext, which in turn is wired up to call cpu_v7_set_pte_ext,
> which is defined in proc-v7-3level.S.
> 
> For huge pages, given newprot a pgprot_t value for a shared writable
> VMA, and ptep a pointer to a pte belonging to this VMA; the following
> behaviour is assumed by core code:
>    hugetlb_change_protection(vma, address, end, newprot);
>    ...
> 
>    huge_pte_write(huge_ptep_get(ptep)); /* should be true! */
> 
> Unfortunately, cpu_v7_set_pte_ext will change the bit layout of the
> resultant pte, and will set the read only bit if the dirty bit is not
> also enabled.
> 
> If one were to allocate a read only shared huge page, then fault it in,
> and then mprotect it to be writeable. A subsequent write to that huge
> page will result in a spurious call to hugetlb_cow, which causes
> corruption. This call is optimised away prior to:
>  37a2140 mm, hugetlb: do not use a page in page cache for cow
>          optimization
> 
> If one runs the libhugetlbfs test suite on v3.12-rc1 upwards, then the
> mprotect test will cause the afformentioned corruption and before the
> set of tests completes, the system will be left in an unresponsive
> state. (calls to fork fail with -ENOMEM).
> 
> This was an absolute pig to debug and, as this is the second time I've
> ran into issues caused by ptes being modified in transit, I've opted to
> re-implement set_huge_pte_at such that it just dereferences the pte.
> (in a similar manner as arm64). This has also allowed me to revert the
> pte_same logic change (that removed the NG bit from comparison), by
> also setting the NG bit for all new huge ptes.
> 
> These patches are against 3.12, and I have tested this series on an
> Arndale board with LPAE running libhugetlbfs.
> 
> I would really value any comments/critique/flames on this series.
> Especially as I've ommitted the DCCMVAC at the end of set_huge_pte_at
> as I couldn't see why it was needed, please yell at me if it is needed!
> :-)
> 
> Cheers,
> -- 
> Steve

Hi,
A question has been raised for the arm64 analogue of this series as to
whether or not this is the best approach:
http://lists.infradead.org/pipermail/linux-arm-kernel/2013-November/215155.html

I am having a think about this, and will send out a V2 once my brain
has caught up. :-)

Cheers,
-- 
Steve

  parent reply	other threads:[~2013-12-03 13:46 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-19 17:35 [PATCH 0/3] Simplify set_huge_pte_at, pte_same for LPAE Steve Capper
2013-11-19 17:35 ` [PATCH 1/3] ARM: mm: Rewire LPAE set_huge_pte_at Steve Capper
2013-11-19 17:35 ` [PATCH 2/3] ARM: mm: Make LPAE huge page ptes NG by default Steve Capper
2013-11-19 17:35 ` [PATCH 3/3] Revert "ARM: mm: correct pte_same behaviour for LPAE." Steve Capper
2013-11-19 18:02 ` [PATCH 0/3] Simplify set_huge_pte_at, pte_same for LPAE Christoffer Dall
2013-12-03 13:46 ` Steve Capper [this message]
2013-12-03 15:09   ` Catalin Marinas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20131203134623.GA24994@linaro.org \
    --to=steve.capper@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.