From: Paul Moore <pmoore@redhat.com>
To: selinux@tycho.nsa.gov
Cc: Janak.Desai@gtri.gatech.edu
Subject: [PATCH 1/2] selinux: handle TCP SYN-ACK packets correctly in selinux_ip_output()
Date: Tue, 03 Dec 2013 11:34:20 -0500 [thread overview]
Message-ID: <20131203163420.4743.86913.stgit@localhost> (raw)
In-Reply-To: <20131203163012.4743.26970.stgit@localhost>
In selinux_ip_output() we always label packets based on the parent
socket. While this approach works in almost all cases, it doesn't
work in the case of TCP SYN-ACK packets when the correct label is not
the label of the parent socket, but rather the label of the larval
socket represented by the request_sock struct.
Unfortunately, since the request_sock isn't queued on the parent
socket until *after* the SYN-ACK packet is sent, we can't lookup the
request_sock to determine the correct label for the packet; at this
point in time the best we can do is simply pass/NF_ACCEPT the packet.
It must be said that simply passing the packet without any explicit
labeling action, while far from ideal, is not terrible as the SYN-ACK
packet will inherit any IP option based labeling from the initial
connection request so the label *should* be correct and all our
access controls remain in place so we shouldn't have to worry about
information leaks.
Reported-by: Janak Desai <Janak.Desai@gtri.gatech.edu>
Tested-by: Janak Desai <Janak.Desai@gtri.gatech.edu>
Signed-off-by: Paul Moore <pmoore@redhat.com>
---
security/selinux/hooks.c | 25 +++++++++++++++++++++++--
1 file changed, 23 insertions(+), 2 deletions(-)
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 777ee98..877bab7 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -53,6 +53,7 @@
#include <net/ip.h> /* for local_port_range[] */
#include <net/sock.h>
#include <net/tcp.h> /* struct or_callable used in sock_rcv_skb */
+#include <net/inet_connection_sock.h>
#include <net/net_namespace.h>
#include <net/netlabel.h>
#include <linux/uaccess.h>
@@ -4731,6 +4732,7 @@ static unsigned int selinux_ipv6_forward(unsigned int hooknum,
static unsigned int selinux_ip_output(struct sk_buff *skb,
u16 family)
{
+ struct sock *sk;
u32 sid;
if (!netlbl_enabled())
@@ -4739,8 +4741,27 @@ static unsigned int selinux_ip_output(struct sk_buff *skb,
/* we do this in the LOCAL_OUT path and not the POST_ROUTING path
* because we want to make sure we apply the necessary labeling
* before IPsec is applied so we can leverage AH protection */
- if (skb->sk) {
- struct sk_security_struct *sksec = skb->sk->sk_security;
+ sk = skb->sk;
+ if (sk) {
+ struct sk_security_struct *sksec;
+
+ if (sk->sk_state == TCP_LISTEN)
+ /* if the socket is the listening state then this
+ * packet is a SYN-ACK packet which means it needs to
+ * be labeled based on the connection/request_sock and
+ * not the parent socket. unfortunately, we can't
+ * lookup the request_sock yet as it isn't queued on
+ * the parent socket until after the SYN-ACK is sent.
+ * the "solution" is to simply pass the packet as-is
+ * as any IP option based labeling should be copied
+ * from the initial connection request (in the IP
+ * layer). it is far from ideal, but until we get a
+ * security label in the packet itself this is the
+ * best we can do. */
+ return NF_ACCEPT;
+
+ /* standard practice, label using the parent socket */
+ sksec = sk->sk_security;
sid = sksec->sid;
} else
sid = SECINITSID_KERNEL;
--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.
next prev parent reply other threads:[~2013-12-03 16:34 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-03 16:34 [PATCH 0/2] Fix TCP SYN-ACK labeling and access controls Paul Moore
2013-12-03 16:34 ` Paul Moore [this message]
2013-12-03 16:34 ` [PATCH 2/2] selinux: handle TCP SYN-ACK packets correctly in selinux_ip_postroute() Paul Moore
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131203163420.4743.86913.stgit@localhost \
--to=pmoore@redhat.com \
--cc=Janak.Desai@gtri.gatech.edu \
--cc=selinux@tycho.nsa.gov \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.