From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Wed, 4 Dec 2013 17:04:38 -0500 Subject: [U-Boot] pcm051: Support for revision 3 In-Reply-To: <1384856538-27002-1-git-send-email-larsi@wh2.tu-dresden.de> References: <1384856538-27002-1-git-send-email-larsi@wh2.tu-dresden.de> Message-ID: <20131204220438.GE420@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Tue, Nov 19, 2013 at 11:22:18AM +0100, Lars Poeschel wrote: > From: Lars Poeschel > > Phytec sells revision or version 3 of pcm051. It is labeled 1358.3 on > the board. The difference for u-boot is that is has other DDR3 RAM on it: > 1 x MT41K256M16HA125E instead of 2 x MT41J256M8HX15E on revisions 1 and > 2. Both configurations are 512 MiB. > Configure your u-boot build with pcm051_rev3 for the new RAM and > pcm051_rev1 for the old RAM configuration. Board revision 2 has to use > pcm051_rev1 also. > > Signed-off-by: Lars Poeschel Applied to u-boot-ti/master, after adapting to my change about not touching some EMIF4D registers, :thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: