From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from devils.ext.ti.com (devils.ext.ti.com [198.47.26.153]) by arago-project.org (Postfix) with ESMTPS id 5F84D52997 for ; Mon, 9 Dec 2013 05:46:50 +0000 (UTC) Received: from dflxv15.itg.ti.com ([128.247.5.124]) by devils.ext.ti.com (8.13.7/8.13.7) with ESMTP id rB95kmM1027822 for ; Sun, 8 Dec 2013 23:46:48 -0600 Received: from DLEE71.ent.ti.com (dlee71.ent.ti.com [157.170.170.114]) by dflxv15.itg.ti.com (8.14.3/8.13.8) with ESMTP id rB95kmVg005508 for ; Sun, 8 Dec 2013 23:46:48 -0600 Received: from dflp32.itg.ti.com (10.64.6.15) by DLEE71.ent.ti.com (157.170.170.114) with Microsoft SMTP Server id 14.2.342.3; Sun, 8 Dec 2013 23:46:47 -0600 Received: from localhost (ileax41-snat.itg.ti.com [10.172.224.153]) by dflp32.itg.ti.com (8.14.3/8.13.8) with ESMTP id rB95kjan021550; Sun, 8 Dec 2013 23:46:46 -0600 Date: Mon, 9 Dec 2013 00:46:45 -0500 From: Denys Dmytriyenko To: Yaniv Mahani Message-ID: <20131209054643.GE21500@edge> References: <1386490696-16318-1-git-send-email-yanivma@ti.com> MIME-Version: 1.0 In-Reply-To: <1386490696-16318-1-git-send-email-yanivma@ti.com> User-Agent: Mutt/1.5.20 (2009-06-14) Cc: meta-arago@arago-project.org Subject: Re: [PATCH 1/8] wpa-supplicant-wl18xx: Update recipe to ol_r8.a8.08 version. X-BeenThere: meta-arago@arago-project.org X-Mailman-Version: 2.1.12 Precedence: list List-Id: Arago metadata layer for TI SDKs - OE-Core/Yocto compatible List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 09 Dec 2013 05:46:51 -0000 Content-Type: text/plain; charset="us-ascii" Content-Disposition: inline Thanks, Yaniv. Please give me a day or so to review your patches. Thanks again for submission! -- Denys On Sun, Dec 08, 2013 at 10:18:09AM +0200, Yaniv Mahani wrote: > From: Yaniv Machani > > - Build wpa-supplicant from TI_Openlink ol_r8.a8.08 > - Add missing includes for building with libnl3. > - Adjusted configuration files, and added p2p conf. > > Signed-off-by: Yaniv Machani > --- > This set of patches should allow integration of WiLink-8 into meta-arago. > It should replace the set of 14 patches previously submitted for review. > > > Note : > Wilink-6 is currently not supported with the latest meta-arago builds. > ECS have decided not to support Wilink-6 in the core SDK also in the future. > Therefore any Wilink-6 broken recipes should not be a concern, as we will clean them up on a different set of patches. > > wifi-direct-demo, battleship, wpa-gui-e applications will shortly be removed as well. > > Yaniv > > .../wpa-supplicant/wpa-supplicant-wl18xx/defconfig | 164 ++++-- > ....a6.01.bb => wpa-supplicant-wl18xx_r8.a8.08.bb} | 6 +- > .../wpa-supplicant/wpa-supplicant.inc | 3 + > .../wpa-supplicant/p2p_supplicant.conf | 14 + > .../wpa-supplicant/wpa_supplicant.conf | 674 +------------------- > 5 files changed, 164 insertions(+), 697 deletions(-) > rename meta-arago-extras/recipes-connectivity/wpa-supplicant/{wpa-supplicant-wl18xx_r8.a6.01.bb => wpa-supplicant-wl18xx_r8.a8.08.bb} (88%) > create mode 100755 meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant/p2p_supplicant.conf > > diff --git a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant-wl18xx/defconfig b/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant-wl18xx/defconfig > index b982e2a..f357b79 100755 > --- a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant-wl18xx/defconfig > +++ b/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant-wl18xx/defconfig > @@ -39,18 +39,6 @@ > #LIBS = -lssl > ############################################################################### > > -#CC=$(CROSS_COMPILE)gcc > -#CFLAGS += -DCONFIG_LIBNL20 > -#CPPFLAGS += -DCONFIG_LIBNL20 > -#LIBS += -L$(NFSROOT)/lib -lnl > -#LIBS_p += -L$(NFSROOT)/lib > -#LIBDIR = $(NFSROOT)/lib > -#BINDIR = $(NFSROOT)/usr/sbin > - > -CONFIG_WAPI=y > -CONFIG_LIBNL20=y > -NEED_BGSCAN=y > -CONFIG_BGSCAN_LEARN=y > > # Driver interface for Host AP driver > #CONFIG_DRIVER_HOSTAP=y > @@ -75,7 +63,7 @@ CONFIG_BGSCAN_LEARN=y > #CONFIG_DRIVER_ATMEL=y > > # Driver interface for old Broadcom driver > -# Please note that the newer Broadcom driver ("hybrid Linux driver") supportsBG > +# Please note that the newer Broadcom driver ("hybrid Linux driver") supports > # Linux wireless extensions and does not need (or even work) with the old > # driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver. > #CONFIG_DRIVER_BROADCOM=y > @@ -90,16 +78,22 @@ CONFIG_BGSCAN_LEARN=y > #CONFIG_DRIVER_RALINK=y > > # Driver interface for generic Linux wireless extensions > -CONFIG_DRIVER_WEXT=y > +# Note: WEXT is deprecated in the current Linux kernel version and no new > +# functionality is added to it. nl80211-based interface is the new > +# replacement for WEXT and its use allows wpa_supplicant to properly control > +# the driver to improve existing functionality like roaming and to support new > +# functionality. > +#CONFIG_DRIVER_WEXT=y > > # Driver interface for Linux drivers using the nl80211 kernel interface > CONFIG_DRIVER_NL80211=y > +CONFIG_LIBNL32=y > > # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) > #CONFIG_DRIVER_BSD=y > #CFLAGS += -I/usr/local/include > #LIBS += -L/usr/local/lib > -#LIBS_p += -L/usr/local/libBG > +#LIBS_p += -L/usr/local/lib > #LIBS_c += -L/usr/local/lib > > # Driver interface for Windows NDIS > @@ -121,13 +115,8 @@ CONFIG_DRIVER_NL80211=y > # Driver interface for development testing > #CONFIG_DRIVER_TEST=y > > -# Include client MLME (management frame processing) for test driver > -# This can be used to test MLME operations in hostapd with the test interface. > -# space. > -#CONFIG_CLIENT_MLME=y > - > # Driver interface for wired Ethernet drivers > -CONFIG_DRIVER_WIRED=y > +#CONFIG_DRIVER_WIRED=y > > # Driver interface for the Broadcom RoboSwitch family > #CONFIG_DRIVER_ROBOSWITCH=y > @@ -163,7 +152,7 @@ CONFIG_EAP_TTLS=y > # functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, > # the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch) > # to add the needed functions. > -#CONFIG_EAP_FAST=y > +CONFIG_EAP_FAST=y > > # EAP-GTC > CONFIG_EAP_GTC=y > @@ -172,11 +161,14 @@ CONFIG_EAP_GTC=y > CONFIG_EAP_OTP=y > > # EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) > -#CONFIG_EAP_SIM=y > +CONFIG_EAP_SIM=y > > # EAP-PSK (experimental; this is _not_ needed for WPA-PSK) > #CONFIG_EAP_PSK=y > > +# EAP-pwd (secure authentication using only a password) > +CONFIG_EAP_PWD=y > + > # EAP-PAX > #CONFIG_EAP_PAX=y > > @@ -208,6 +200,11 @@ CONFIG_EAP_LEAP=y > CONFIG_WPS=y > # Enable WSC 2.0 support > CONFIG_WPS2=y > +# Enable WPS external registrar functionality > +#CONFIG_WPS_ER=y > +# Disable credentials for an open network by default when acting as a WPS > +# registrar. > +#CONFIG_WPS_REG_DISABLE_OPEN=y > > # EAP-IKEv2 > #CONFIG_EAP_IKEV2=y > @@ -224,7 +221,10 @@ CONFIG_SMARTCARD=y > # Enable this if EAP-SIM or EAP-AKA is included > #CONFIG_PCSC=y > > -# Development testingBG > +# Support HT overrides (disable HT/HT40, mask MCS rates, etc.) > +#CONFIG_HT_OVERRIDES=y > + > +# Development testing > #CONFIG_EAPOL_TEST=y > > # Select control interface backend for external programs, e.g, wpa_cli: > @@ -242,6 +242,10 @@ CONFIG_CTRL_IFACE=y > # the resulting binary. > #CONFIG_READLINE=y > > +# Include internal line edit mode in wpa_cli. This can be used as a replacement > +# for GNU Readline to provide limited command line editing and history support. > +CONFIG_WPA_CLI_EDIT=y > + > # Remove debugging code that is printing out debug message to stdout. > # This can be used to reduce the size of the wpa_supplicant considerably > # if debugging code is not needed. The size reduction can be around 35% > @@ -295,13 +299,16 @@ CONFIG_BACKEND=file > # unix = UNIX/POSIX like systems (default) > # win32 = Windows systems > # none = Empty template > -#CONFIG_OS=unix > +CONFIG_OS=unix > > # Select event loop implementation > # eloop = select() loop (default) > # eloop_win = Windows events and WaitForMultipleObject() loop > # eloop_none = Empty template > -#CONFIG_ELOOP=eloop > +CONFIG_ELOOP=eloop > + > +# Should we use poll instead of select? Select is used by default. > +#CONFIG_ELOOP_POLL=y > > # Select layer 2 packet implementation > # linux = Linux packet socket (default) > @@ -310,7 +317,7 @@ CONFIG_BACKEND=file > # winpcap = WinPcap with receive thread > # ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) > # none = Empty template > -#CONFIG_L2_PACKET=linux > +CONFIG_L2_PACKET=linux > > # PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) > CONFIG_PEERKEY=y > @@ -323,18 +330,24 @@ CONFIG_PEERKEY=y > > # Select TLS implementation > # openssl = OpenSSL (default) > -# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA) > +# gnutls = GnuTLS > # internal = Internal TLSv1 implementation (experimental) > # none = Empty template > #CONFIG_TLS=openssl > > -# Whether to enable TLS/IA support, which is required for EAP-TTLSv1. > -# You need CONFIG_TLS=gnutls for this to have any effect. Please note that > -# even though the core GnuTLS library is released under LGPL, this extra > -# library uses GPL and as such, the terms of GPL apply to the combination > -# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not > -# apply for distribution of the resulting binary. > -#CONFIG_GNUTLS_EXTRA=y > +# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1) > +# can be enabled to get a stronger construction of messages when block ciphers > +# are used. It should be noted that some existing TLS v1.0 -based > +# implementation may not be compatible with TLS v1.1 message (ClientHello is > +# sent prior to negotiating which version will be used) > +#CONFIG_TLSV11=y > + > +# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2) > +# can be enabled to enable use of stronger crypto algorithms. It should be > +# noted that some existing TLS v1.0 -based implementation may not be compatible > +# with TLS v1.2 message (ClientHello is sent prior to negotiating which version > +# will be used) > +#CONFIG_TLSV12=y > > # If CONFIG_TLS=internal is used, additional library and include paths are > # needed for LibTomMath. Alternatively, an integrated, minimal version of > @@ -360,14 +373,14 @@ CONFIG_PEERKEY=y > > # Add support for old DBus control interface > # (fi.epitest.hostap.WPASupplicant) > -CONFIG_CTRL_IFACE_DBUS=y > +#CONFIG_CTRL_IFACE_DBUS=y > > # Add support for new DBus control interface > # (fi.w1.hostap.wpa_supplicant1) > -CONFIG_CTRL_IFACE_DBUS_NEW=y > +#CONFIG_CTRL_IFACE_DBUS_NEW=y > > # Add introspection support for new DBus control interface > -CONFIG_CTRL_IFACE_DBUS_INTRO=y > +#CONFIG_CTRL_IFACE_DBUS_INTRO=y > > # Add support for loading EAP methods dynamically as shared libraries. > # When this option is enabled, each EAP method can be either included > @@ -394,7 +407,22 @@ CONFIG_CTRL_IFACE_DBUS_INTRO=y > #CONFIG_IEEE80211R=y > > # Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) > -CONFIG_DEBUG_FILE=y > +#CONFIG_DEBUG_FILE=y > + > +# Send debug messages to syslog instead of stdout > +#CONFIG_DEBUG_SYSLOG=y > +# Set syslog facility for debug messages > +#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON > + > +# Add support for sending all debug messages (regardless of debug verbosity) > +# to the Linux kernel tracing facility. This helps debug the entire stack by > +# making it easy to record everything happening from the driver up into the > +# same file, e.g., using trace-cmd. > +#CONFIG_DEBUG_LINUX_TRACING=y > + > +# Add support for writing debug log to Android logcat instead of standard > +# output > +CONFIG_ANDROID_LOG=y > > # Enable privilege separation (see README 'Privilege separation' for details) > #CONFIG_PRIVSEP=y > @@ -407,7 +435,7 @@ CONFIG_DEBUG_FILE=y > # This tracks use of memory allocations and other registrations and reports > # incorrect use with a backtrace of call (or allocation) location. > #CONFIG_WPA_TRACE=y > -# For BSD, comment out these. > +# For BSD, uncomment these. > #LIBS += -lexecinfo > #LIBS_p += -lexecinfo > #LIBS_c += -lexecinfo > @@ -416,15 +444,63 @@ CONFIG_DEBUG_FILE=y > # This enables use of libbfd to get more detailed symbols for the backtraces > # generated by CONFIG_WPA_TRACE=y. > #CONFIG_WPA_TRACE_BFD=y > -# For BSD, comment out these. > +# For BSD, uncomment these. > #LIBS += -lbfd -liberty -lz > #LIBS_p += -lbfd -liberty -lz > #LIBS_c += -lbfd -liberty -lz > > -# for p2p > +# wpa_supplicant depends on strong random number generation being available > +# from the operating system. os_get_random() function is used to fetch random > +# data when needed, e.g., for key generation. On Linux and BSD systems, this > +# works by reading /dev/urandom. It should be noted that the OS entropy pool > +# needs to be properly initialized before wpa_supplicant is started. This is > +# important especially on embedded devices that do not have a hardware random > +# number generator and may by default start up with minimal entropy available > +# for random number generation. > +# > +# As a safety net, wpa_supplicant is by default trying to internally collect > +# additional entropy for generating random data to mix in with the data fetched > +# from the OS. This by itself is not considered to be very strong, but it may > +# help in cases where the system pool is not initialized properly. However, it > +# is very strongly recommended that the system pool is initialized with enough > +# entropy either by using hardware assisted random number generator or by > +# storing state over device reboots. > +# > +# wpa_supplicant can be configured to maintain its own entropy store over > +# restarts to enhance random number generation. This is not perfect, but it is > +# much more secure than using the same sequence of random numbers after every > +# reboot. This can be enabled with -e command line option. The > +# specified file needs to be readable and writable by wpa_supplicant. > +# > +# If the os_get_random() is known to provide strong random data (e.g., on > +# Linux/BSD, the board in question is known to have reliable source of random > +# data from /dev/urandom), the internal wpa_supplicant random pool can be > +# disabled. This will save some in binary size and CPU use. However, this > +# should only be considered for builds that are known to be used on devices > +# that meet the requirements described above. > +#CONFIG_NO_RANDOM_POOL=y > + > +# IEEE 802.11n (High Throughput) support (mainly for AP mode) > +CONFIG_IEEE80211N=y > + > +# Interworking (IEEE 802.11u) > +# This can be used to enable functionality to improve interworking with > +# external networks (GAS/ANQP to learn more about the networks and network > +# selection based on available credentials). > +CONFIG_INTERWORKING=y > + > +# Hotspot 2.0 > +CONFIG_HS20=y > + > +# Disable roaming in wpa_supplicant > +#CONFIG_NO_ROAMING=y > + > +# Enable P2P > CONFIG_P2P=y > CONFIG_AP=y > > -# IEEE 802.11n (High Throughput) support > -CONFIG_IEEE80211N=y > +# bgscan > +NEED_BGSCAN=y > +CONFIG_BGSCAN_LEARN=y > +CONFIG_BGSCAN_SIMPLE=y > > diff --git a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant-wl18xx_r8.a6.01.bb b/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant-wl18xx_r8.a8.08.bb > similarity index 88% > rename from meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant-wl18xx_r8.a6.01.bb > rename to meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant-wl18xx_r8.a8.08.bb > index f6c4f70..ec7a0c7 100644 > --- a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant-wl18xx_r8.a6.01.bb > +++ b/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant-wl18xx_r8.a8.08.bb > @@ -10,9 +10,9 @@ LIC_FILES_CHKSUM = "file://../COPYING;md5=ab87f20cd7e8c0d0a6539b34d3791d0e \ > > FILESEXTRAPATHS_append := "${THISDIR}/wpa-supplicant:" > > -# Tag: ol_r8.a6.01 > -SRCREV = "7190ff7dbd43243290b626068ded0d61c5019050" > -PR = "r2+gitr${SRCPV}" > +# Tag: ol_r8.a8.08 > +SRCREV = "257ab333aad993b4be81808524bc0d939c276058" > +PR_append = "a+gitr${SRCPV}" > > # Add ti to the PV to indicate that this is a TI modify version of wpa-supplicant. > PV = "2.0-devel-ti" > diff --git a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant.inc b/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant.inc > index 2d8970f..9678b1b 100644 > --- a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant.inc > +++ b/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant.inc > @@ -21,6 +21,7 @@ SRC_URI = "git://github.com/TI-OpenLink/hostap.git;protocol=git \ > file://defaults-sane \ > file://wpa-supplicant.sh \ > file://wpa_supplicant.conf \ > + file://p2p_supplicant.conf \ > file://wpa_supplicant.conf-sane \ > file://99_wpa_supplicant \ > file://wpa_supplicant.conf \ > @@ -55,6 +56,7 @@ do_install () { > install -d ${D}${sysconfdir}/default > install -m 600 ${WORKDIR}/defaults-sane ${D}${sysconfdir}/default/wpa > install -m 600 ${WORKDIR}/wpa_supplicant.conf-sane ${D}${sysconfdir}/wpa_supplicant.conf > + install -m 600 ${WORKDIR}/p2p_supplicant.conf ${D}${sysconfdir}/p2p_supplicant.conf > > if grep -q ^CONFIG_CTRL_IFACE_DBUS=y .config || grep -q ^CONFIG_CTRL_IFACE_DBUS_NEW=y .config; then > install -d ${D}/${sysconfdir}/dbus-1/system.d > @@ -104,6 +106,7 @@ pkg_postinst_wpa-supplicant () { > do_configure () { > install -m 0755 ${WORKDIR}/defconfig .config > echo "CFLAGS += -I${STAGING_INCDIR}" >> .config > + echo "CFLAGS += -I${STAGING_INCDIR}/libnl3/" >> .config > echo "LIBS += -L${STAGING_LIBDIR}" >> .config > echo "LIBS_p += -L${STAGING_LIBDIR}" >> .config > if [ "${@base_contains('COMBINED_FEATURES', 'madwifi', 1, 0, d)}" = "1" ]; then > diff --git a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant/p2p_supplicant.conf b/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant/p2p_supplicant.conf > new file mode 100755 > index 0000000..2de8730 > --- /dev/null > +++ b/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant/p2p_supplicant.conf > @@ -0,0 +1,14 @@ > +ctrl_interface=/var/run/wpa_supplicant > +update_config=0 > +device_name=TI-SITARA-P2P > +device_type=1-0050F204-1 > +config_methods=virtual_push_button physical_display keypad > +p2p_go_intent=0 > +country=US > +##p2p_pref_chan=115:36 115:40 > +driver_param=use_multi_chan_concurrent=1 use_p2p_group_interface=1 > +p2p_go_max_inactivity=60 > +p2p_go_ht40=1 > +p2p_multi_chan=1 > +disassoc_low_ack=1 > +concurrent_sched_scan=1 > diff --git a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa_supplicant.conf b/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa_supplicant.conf > index f0c993d..f144a38 100644 > --- a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa_supplicant.conf > +++ b/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa_supplicant.conf > @@ -1,19 +1,4 @@ > -##### Example wpa_supplicant configuration file ############################### > -# > -# This file describes configuration file format and lists all available option. > -# Please also take a look at simpler configuration examples in 'examples' > -# subdirectory. > -# > -# Empty lines and lines starting with # are ignored > - > -# NOTE! This file may contain password information and should probably be made > -# readable only by root user on multiuser systems. > - > -# Note: All file paths in this configuration file should use full (absolute, > -# not relative to working directory) path in order to allow working directory > -# to be changed. This can happen if wpa_supplicant is run in the background. > - > -# Whether to allow wpa_supplicant to update (overwrite) configuration > +##### wpa_supplicant configuration file template ##### > # > # This option can be used to allow wpa_supplicant to overwrite configuration > # file whenever configuration is changed (e.g., new network block is added with > @@ -21,59 +6,8 @@ > # wpa_cli/wpa_gui to be able to store the configuration changes permanently. > # Please note that overwriting configuration file will remove the comments from > # it. > -#update_config=1 > - > -# global configuration (shared by all network blocks) > -# > -# Parameters for the control interface. If this is specified, wpa_supplicant > -# will open a control interface that is available for external programs to > -# manage wpa_supplicant. The meaning of this string depends on which control > -# interface mechanism is used. For all cases, the existance of this parameter > -# in configuration is used to determine whether the control interface is > -# enabled. > -# > -# For UNIX domain sockets (default on Linux and BSD): This is a directory that > -# will be created for UNIX domain sockets for listening to requests from > -# external programs (CLI/GUI, etc.) for status information and configuration. > -# The socket file will be named based on the interface name, so multiple > -# wpa_supplicant processes can be run at the same time if more than one > -# interface is used. > -# /var/run/wpa_supplicant is the recommended directory for sockets and by > -# default, wpa_cli will use it when trying to connect with wpa_supplicant. > -# > -# Access control for the control interface can be configured by setting the > -# directory to allow only members of a group to use sockets. This way, it is > -# possible to run wpa_supplicant as root (since it needs to change network > -# configuration and open raw sockets) and still allow GUI/CLI components to be > -# run as non-root users. However, since the control interface can be used to > -# change the network configuration, this access needs to be protected in many > -# cases. By default, wpa_supplicant is configured to use gid 0 (root). If you > -# want to allow non-root users to use the control interface, add a new group > -# and change this value to match with that group. Add users that should have > -# control interface access to this group. If this variable is commented out or > -# not included in the configuration file, group will not be changed from the > -# value it got by default when the directory or socket was created. > -# > -# When configuring both the directory and group, use following format: > -# DIR=/var/run/wpa_supplicant GROUP=wheel > -# DIR=/var/run/wpa_supplicant GROUP=0 > -# (group can be either group name or gid) > -# > -# For UDP connections (default on Windows): The value will be ignored. This > -# variable is just used to select that the control interface is to be created. > -# The value can be set to, e.g., udp (ctrl_interface=udp) > -# > -# For Windows Named Pipe: This value can be used to set the security descriptor > -# for controlling access to the control interface. Security descriptor can be > -# set using Security Descriptor String Format (see http://msdn.microsoft.com/ > -# library/default.asp?url=/library/en-us/secauthz/security/ > -# security_descriptor_string_format.asp). The descriptor string needs to be > -# prefixed with SDDL=. For example, ctrl_interface=SDDL=D: would set an empty > -# DACL (which will reject all connections). See README-Windows.txt for more > -# information about SDDL string format. > -# > +update_config=1 > ctrl_interface=/var/run/wpa_supplicant > - > # IEEE 802.1X/EAPOL version > # wpa_supplicant is implemented based on IEEE Std 802.1X-2004 which defines > # EAPOL version 2. However, there are many APs that do not handle the new > @@ -82,14 +16,15 @@ ctrl_interface=/var/run/wpa_supplicant > # to 1 by default. This configuration value can be used to set it to the new > # version (2). > eapol_version=1 > - > # AP scanning/selection > # By default, wpa_supplicant requests driver to perform AP scanning and then > # uses the scan results to select a suitable AP. Another alternative is to > # allow the driver to take care of AP scanning and selection and use > # wpa_supplicant just to process EAPOL frames based on IEEE 802.11 association > # information from the driver. > -# 1: wpa_supplicant initiates scanning and AP selection > +# 1: wpa_supplicant initiates scanning and AP selection; if no APs matching to > +# the currently enabled networks are found, a new network (IBSS or AP mode > +# operation) may be initialized (if configured) (default) > # 0: driver takes care of scanning, AP selection, and IEEE 802.11 association > # parameters (e.g., WPA IE generation); this mode can also be used with > # non-WPA drivers when using IEEE 802.1X mode; do not try to associate with > @@ -102,589 +37,28 @@ eapol_version=1 > # the driver reports successful association; each network block should have > # explicit security policy (i.e., only one option in the lists) for > # key_mgmt, pairwise, group, proto variables > +# When using IBSS or AP mode, ap_scan=2 mode can force the new network to be > +# created immediately regardless of scan results. ap_scan=1 mode will first try > +# to scan for existing networks and only if no matches with the enabled > +# networks are found, a new IBSS or AP mode network is created. > ap_scan=1 > - > # EAP fast re-authentication > # By default, fast re-authentication is enabled for all EAP methods that > # support it. This variable can be used to disable fast re-authentication. > # Normally, there is no need to disable this. > fast_reauth=1 > - > -# OpenSSL Engine support > -# These options can be used to load OpenSSL engines. > -# The two engines that are supported currently are shown below: > -# They are both from the opensc project (http://www.opensc.org/) > -# By default no engines are loaded. > -# make the opensc engine available > -#opensc_engine_path=/usr/lib/opensc/engine_opensc.so > -# make the pkcs11 engine available > -#pkcs11_engine_path=/usr/lib/opensc/engine_pkcs11.so > -# configure the path to the pkcs11 module required by the pkcs11 engine > -#pkcs11_module_path=/usr/lib/pkcs11/opensc-pkcs11.so > - > -# Dynamic EAP methods > -# If EAP methods were built dynamically as shared object files, they need to be > -# loaded here before being used in the network blocks. By default, EAP methods > -# are included statically in the build, so these lines are not needed > -#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_tls.so > -#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_md5.so > - > -# Driver interface parameters > -# This field can be used to configure arbitrary driver interace parameters. The > -# format is specific to the selected driver interface. This field is not used > -# in most cases. > -#driver_param="field=value" > - > -# Maximum lifetime for PMKSA in seconds; default 43200 > -#dot11RSNAConfigPMKLifetime=43200 > -# Threshold for reauthentication (percentage of PMK lifetime); default 70 > -#dot11RSNAConfigPMKReauthThreshold=70 > -# Timeout for security association negotiation in seconds; default 60 > -#dot11RSNAConfigSATimeout=60 > - > -# network block > -# > -# Each network (usually AP's sharing the same SSID) is configured as a separate > -# block in this configuration file. The network blocks are in preference order > -# (the first match is used). > -# > -# network block fields: > -# > -# disabled: > -# 0 = this network can be used (default) > -# 1 = this network block is disabled (can be enabled through ctrl_iface, > -# e.g., with wpa_cli or wpa_gui) > -# > -# id_str: Network identifier string for external scripts. This value is passed > -# to external action script through wpa_cli as WPA_ID_STR environment > -# variable to make it easier to do network specific configuration. > -# > -# ssid: SSID (mandatory); either as an ASCII string with double quotation or > -# as hex string; network name > -# > -# scan_ssid: > -# 0 = do not scan this SSID with specific Probe Request frames (default) > -# 1 = scan with SSID-specific Probe Request frames (this can be used to > -# find APs that do not accept broadcast SSID or use multiple SSIDs; > -# this will add latency to scanning, so enable this only when needed) > -# > -# bssid: BSSID (optional); if set, this network block is used only when > -# associating with the AP using the configured BSSID > -# > -# priority: priority group (integer) > -# By default, all networks will get same priority group (0). If some of the > -# networks are more desirable, this field can be used to change the order in > -# which wpa_supplicant goes through the networks when selecting a BSS. The > -# priority groups will be iterated in decreasing priority (i.e., the larger the > -# priority value, the sooner the network is matched against the scan results). > -# Within each priority group, networks will be selected based on security > -# policy, signal strength, etc. > -# Please note that AP scanning with scan_ssid=1 and ap_scan=2 mode are not > -# using this priority to select the order for scanning. Instead, they try the > -# networks in the order that used in the configuration file. > -# > -# mode: IEEE 802.11 operation mode > -# 0 = infrastructure (Managed) mode, i.e., associate with an AP (default) > -# 1 = IBSS (ad-hoc, peer-to-peer) > -# Note: IBSS can only be used with key_mgmt NONE (plaintext and static WEP) > -# and key_mgmt=WPA-NONE (fixed group key TKIP/CCMP). In addition, ap_scan has > -# to be set to 2 for IBSS. WPA-None requires following network block options: > -# proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or CCMP, but not > -# both), and psk must also be set. > -# > -# proto: list of accepted protocols > -# WPA = WPA/IEEE 802.11i/D3.0 > -# RSN = WPA2/IEEE 802.11i (also WPA2 can be used as an alias for RSN) > -# If not set, this defaults to: WPA RSN > -# > -# key_mgmt: list of accepted authenticated key management protocols > -# WPA-PSK = WPA pre-shared key (this requires 'psk' field) > -# WPA-EAP = WPA using EAP authentication (this can use an external > -# program, e.g., Xsupplicant, for IEEE 802.1X EAP Authentication > -# IEEE8021X = IEEE 802.1X using EAP authentication and (optionally) dynamically > -# generated WEP keys > -# NONE = WPA is not used; plaintext or static WEP could be used > -# If not set, this defaults to: WPA-PSK WPA-EAP > -# > -# auth_alg: list of allowed IEEE 802.11 authentication algorithms > -# OPEN = Open System authentication (required for WPA/WPA2) > -# SHARED = Shared Key authentication (requires static WEP keys) > -# LEAP = LEAP/Network EAP (only used with LEAP) > -# If not set, automatic selection is used (Open System with LEAP enabled if > -# LEAP is allowed as one of the EAP methods). > -# > -# pairwise: list of accepted pairwise (unicast) ciphers for WPA > -# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0] > -# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0] > -# NONE = Use only Group Keys (deprecated, should not be included if APs support > -# pairwise keys) > -# If not set, this defaults to: CCMP TKIP > -# > -# group: list of accepted group (broadcast/multicast) ciphers for WPA > -# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0] > -# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0] > -# WEP104 = WEP (Wired Equivalent Privacy) with 104-bit key > -# WEP40 = WEP (Wired Equivalent Privacy) with 40-bit key [IEEE 802.11] > -# If not set, this defaults to: CCMP TKIP WEP104 WEP40 > -# > -# psk: WPA preshared key; 256-bit pre-shared key > -# The key used in WPA-PSK mode can be entered either as 64 hex-digits, i.e., > -# 32 bytes or as an ASCII passphrase (in which case, the real PSK will be > -# generated using the passphrase and SSID). ASCII passphrase must be between > -# 8 and 63 characters (inclusive). > -# This field is not needed, if WPA-EAP is used. > -# Note: Separate tool, wpa_passphrase, can be used to generate 256-bit keys > -# from ASCII passphrase. This process uses lot of CPU and wpa_supplicant > -# startup and reconfiguration time can be optimized by generating the PSK only > -# only when the passphrase or SSID has actually changed. > -# > -# eapol_flags: IEEE 802.1X/EAPOL options (bit field) > -# Dynamic WEP key required for non-WPA mode > -# bit0 (1): require dynamically generated unicast WEP key > -# bit1 (2): require dynamically generated broadcast WEP key > -# (3 = require both keys; default) > -# Note: When using wired authentication, eapol_flags must be set to 0 for the > -# authentication to be completed successfully. > -# > -# proactive_key_caching: > -# Enable/disable opportunistic PMKSA caching for WPA2. > -# 0 = disabled (default) > -# 1 = enabled > -# > -# wep_key0..3: Static WEP key (ASCII in double quotation, e.g. "abcde" or > -# hex without quotation, e.g., 0102030405) > -# wep_tx_keyidx: Default WEP key index (TX) (0..3) > -# > -# peerkey: Whether PeerKey negotiation for direct links (IEEE 802.11e DLS) is > -# allowed. This is only used with RSN/WPA2. > -# 0 = disabled (default) > -# 1 = enabled > -#peerkey=1 > -# > -# Following fields are only used with internal EAP implementation. > -# eap: space-separated list of accepted EAP methods > -# MD5 = EAP-MD5 (unsecure and does not generate keying material -> > -# cannot be used with WPA; to be used as a Phase 2 method > -# with EAP-PEAP or EAP-TTLS) > -# MSCHAPV2 = EAP-MSCHAPv2 (cannot be used separately with WPA; to be used > -# as a Phase 2 method with EAP-PEAP or EAP-TTLS) > -# OTP = EAP-OTP (cannot be used separately with WPA; to be used > -# as a Phase 2 method with EAP-PEAP or EAP-TTLS) > -# GTC = EAP-GTC (cannot be used separately with WPA; to be used > -# as a Phase 2 method with EAP-PEAP or EAP-TTLS) > -# TLS = EAP-TLS (client and server certificate) > -# PEAP = EAP-PEAP (with tunnelled EAP authentication) > -# TTLS = EAP-TTLS (with tunnelled EAP or PAP/CHAP/MSCHAP/MSCHAPV2 > -# authentication) > -# If not set, all compiled in methods are allowed. > -# > -# identity: Identity string for EAP > -# anonymous_identity: Anonymous identity string for EAP (to be used as the > -# unencrypted identity with EAP types that support different tunnelled > -# identity, e.g., EAP-TTLS) > -# password: Password string for EAP > -# ca_cert: File path to CA certificate file (PEM/DER). This file can have one > -# or more trusted CA certificates. If ca_cert and ca_path are not > -# included, server certificate will not be verified. This is insecure and > -# a trusted CA certificate should always be configured when using > -# EAP-TLS/TTLS/PEAP. Full path should be used since working directory may > -# change when wpa_supplicant is run in the background. > -# On Windows, trusted CA certificates can be loaded from the system > -# certificate store by setting this to cert_store://, e.g., > -# ca_cert="cert_store://CA" or ca_cert="cert_store://ROOT". > -# Note that when running wpa_supplicant as an application, the user > -# certificate store (My user account) is used, whereas computer store > -# (Computer account) is used when running wpasvc as a service. > -# ca_path: Directory path for CA certificate files (PEM). This path may > -# contain multiple CA certificates in OpenSSL format. Common use for this > -# is to point to system trusted CA list which is often installed into > -# directory like /etc/ssl/certs. If configured, these certificates are > -# added to the list of trusted CAs. ca_cert may also be included in that > -# case, but it is not required. > -# client_cert: File path to client certificate file (PEM/DER) > -# Full path should be used since working directory may change when > -# wpa_supplicant is run in the background. > -# Alternatively, a named configuration blob can be used by setting this > -# to blob://. > -# private_key: File path to client private key file (PEM/DER/PFX) > -# When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be > -# commented out. Both the private key and certificate will be read from > -# the PKCS#12 file in this case. Full path should be used since working > -# directory may change when wpa_supplicant is run in the background. > -# Windows certificate store can be used by leaving client_cert out and > -# configuring private_key in one of the following formats: > -# cert://substring_to_match > -# hash://certificate_thumbprint_in_hex > -# for example: private_key="hash://63093aa9c47f56ae88334c7b65a4" > -# Note that when running wpa_supplicant as an application, the user > -# certificate store (My user account) is used, whereas computer store > -# (Computer account) is used when running wpasvc as a service. > -# Alternatively, a named configuration blob can be used by setting this > -# to blob://. > -# private_key_passwd: Password for private key file (if left out, this will be > -# asked through control interface) > -# dh_file: File path to DH/DSA parameters file (in PEM format) > -# This is an optional configuration file for setting parameters for an > -# ephemeral DH key exchange. In most cases, the default RSA > -# authentication does not use this configuration. However, it is possible > -# setup RSA to use ephemeral DH key exchange. In addition, ciphers with > -# DSA keys always use ephemeral DH keys. This can be used to achieve > -# forward secrecy. If the file is in DSA parameters format, it will be > -# automatically converted into DH params. > -# subject_match: Substring to be matched against the subject of the > -# authentication server certificate. If this string is set, the server > -# sertificate is only accepted if it contains this string in the subject. > -# The subject string is in following format: > -# /C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@example.com > -# altsubject_match: Semicolon separated string of entries to be matched against > -# the alternative subject name of the authentication server certificate. > -# If this string is set, the server sertificate is only accepted if it > -# contains one of the entries in an alternative subject name extension. > -# altSubjectName string is in following format: TYPE:VALUE > -# Example: EMAIL:server@example.com > -# Example: DNS:server.example.com;DNS:server2.example.com > -# Following types are supported: EMAIL, DNS, URI > -# phase1: Phase1 (outer authentication, i.e., TLS tunnel) parameters > -# (string with field-value pairs, e.g., "peapver=0" or > -# "peapver=1 peaplabel=1") > -# 'peapver' can be used to force which PEAP version (0 or 1) is used. > -# 'peaplabel=1' can be used to force new label, "client PEAP encryption", > -# to be used during key derivation when PEAPv1 or newer. Most existing > -# PEAPv1 implementation seem to be using the old label, "client EAP > -# encryption", and wpa_supplicant is now using that as the default value. > -# Some servers, e.g., Radiator, may require peaplabel=1 configuration to > -# interoperate with PEAPv1; see eap_testing.txt for more details. > -# 'peap_outer_success=0' can be used to terminate PEAP authentication on > -# tunneled EAP-Success. This is required with some RADIUS servers that > -# implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g., > -# Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode) > -# include_tls_length=1 can be used to force wpa_supplicant to include > -# TLS Message Length field in all TLS messages even if they are not > -# fragmented. > -# sim_min_num_chal=3 can be used to configure EAP-SIM to require three > -# challenges (by default, it accepts 2 or 3) > -# phase2: Phase2 (inner authentication with TLS tunnel) parameters > -# (string with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or > -# "autheap=MSCHAPV2 autheap=MD5" for EAP-TTLS) > -# Following certificate/private key fields are used in inner Phase2 > -# authentication when using EAP-TTLS or EAP-PEAP. > -# ca_cert2: File path to CA certificate file. This file can have one or more > -# trusted CA certificates. If ca_cert2 and ca_path2 are not included, > -# server certificate will not be verified. This is insecure and a trusted > -# CA certificate should always be configured. > -# ca_path2: Directory path for CA certificate files (PEM) > -# client_cert2: File path to client certificate file > -# private_key2: File path to client private key file > -# private_key2_passwd: Password for private key file > -# dh_file2: File path to DH/DSA parameters file (in PEM format) > -# subject_match2: Substring to be matched against the subject of the > -# authentication server certificate. > -# altsubject_match2: Substring to be matched against the alternative subject > -# name of the authentication server certificate. > -# > -# fragment_size: Maximum EAP fragment size in bytes (default 1398). > -# This value limits the fragment size for EAP methods that support > -# fragmentation (e.g., EAP-TLS and EAP-PEAP). This value should be set > -# small enough to make the EAP messages fit in MTU of the network > -# interface used for EAPOL. The default value is suitable for most > -# cases. > -# > -# EAP-PSK variables: > -# eappsk: 16-byte (128-bit, 32 hex digits) pre-shared key in hex format > -# nai: user NAI > -# > -# EAP-PAX variables: > -# eappsk: 16-byte (128-bit, 32 hex digits) pre-shared key in hex format > -# > -# EAP-SAKE variables: > -# eappsk: 32-byte (256-bit, 64 hex digits) pre-shared key in hex format > -# (this is concatenation of Root-Secret-A and Root-Secret-B) > -# nai: user NAI (PEERID) > -# > -# EAP-GPSK variables: > -# eappsk: Pre-shared key in hex format (at least 128 bits, i.e., 32 hex digits) > -# nai: user NAI (ID_Client) > -# > -# EAP-FAST variables: > -# pac_file: File path for the PAC entries. wpa_supplicant will need to be able > -# to create this file and write updates to it when PAC is being > -# provisioned or refreshed. Full path to the file should be used since > -# working directory may change when wpa_supplicant is run in the > -# background. Alternatively, a named configuration blob can be used by > -# setting this to blob:// > -# phase1: fast_provisioning=1 option enables in-line provisioning of EAP-FAST > -# credentials (PAC) > -# > -# wpa_supplicant supports number of "EAP workarounds" to work around > -# interoperability issues with incorrectly behaving authentication servers. > -# These are enabled by default because some of the issues are present in large > -# number of authentication servers. Strict EAP conformance mode can be > -# configured by disabling workarounds with eap_workaround=0. > - > -# Example blocks: > - > -# Simple case: WPA-PSK, PSK as an ASCII passphrase, allow all valid ciphers > -network={ > - ssid="simple" > - psk="very secret passphrase" > - priority=5 > -} > - > -# Same as previous, but request SSID-specific scanning (for APs that reject > -# broadcast SSID) > -network={ > - ssid="second ssid" > - scan_ssid=1 > - psk="very secret passphrase" > - priority=2 > -} > - > -# Only WPA-PSK is used. Any valid cipher combination is accepted. > -network={ > - ssid="example" > - proto=WPA > - key_mgmt=WPA-PSK > - pairwise=CCMP TKIP > - group=CCMP TKIP WEP104 WEP40 > - psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb > - priority=2 > -} > - > -# Only WPA-EAP is used. Both CCMP and TKIP is accepted. An AP that used WEP104 > -# or WEP40 as the group cipher will not be accepted. > -network={ > - ssid="example" > - proto=RSN > - key_mgmt=WPA-EAP > - pairwise=CCMP TKIP > - group=CCMP TKIP > - eap=TLS > - identity="user@example.com" > - ca_cert="/etc/cert/ca.pem" > - client_cert="/etc/cert/user.pem" > - private_key="/etc/cert/user.prv" > - private_key_passwd="password" > - priority=1 > -} > - > -# EAP-PEAP/MSCHAPv2 configuration for RADIUS servers that use the new peaplabel > -# (e.g., Radiator) > -network={ > - ssid="example" > - key_mgmt=WPA-EAP > - eap=PEAP > - identity="user@example.com" > - password="foobar" > - ca_cert="/etc/cert/ca.pem" > - phase1="peaplabel=1" > - phase2="auth=MSCHAPV2" > - priority=10 > -} > - > -# EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for the > -# unencrypted use. Real identity is sent only within an encrypted TLS tunnel. > -network={ > - ssid="example" > - key_mgmt=WPA-EAP > - eap=TTLS > - identity="user@example.com" > - anonymous_identity="anonymous@example.com" > - password="foobar" > - ca_cert="/etc/cert/ca.pem" > - priority=2 > -} > - > -# EAP-TTLS/MSCHAPv2 configuration with anonymous identity for the unencrypted > -# use. Real identity is sent only within an encrypted TLS tunnel. > -network={ > - ssid="example" > - key_mgmt=WPA-EAP > - eap=TTLS > - identity="user@example.com" > - anonymous_identity="anonymous@example.com" > - password="foobar" > - ca_cert="/etc/cert/ca.pem" > - phase2="auth=MSCHAPV2" > -} > - > -# WPA-EAP, EAP-TTLS with different CA certificate used for outer and inner > -# authentication. > -network={ > - ssid="example" > - key_mgmt=WPA-EAP > - eap=TTLS > - # Phase1 / outer authentication > - anonymous_identity="anonymous@example.com" > - ca_cert="/etc/cert/ca.pem" > - # Phase 2 / inner authentication > - phase2="autheap=TLS" > - ca_cert2="/etc/cert/ca2.pem" > - client_cert2="/etc/cer/user.pem" > - private_key2="/etc/cer/user.prv" > - private_key2_passwd="password" > - priority=2 > -} > - > -# Both WPA-PSK and WPA-EAP is accepted. Only CCMP is accepted as pairwise and > -# group cipher. > -network={ > - ssid="example" > - bssid=00:11:22:33:44:55 > - proto=WPA RSN > - key_mgmt=WPA-PSK WPA-EAP > - pairwise=CCMP > - group=CCMP > - psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb > -} > - > -# Special characters in SSID, so use hex string. Default to WPA-PSK, WPA-EAP > -# and all valid ciphers. > -network={ > - ssid=00010203 > - psk=000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f > -} > - > - > -# IEEE 802.1X/EAPOL with dynamically generated WEP keys (i.e., no WPA) using > -# EAP-TLS for authentication and key generation; require both unicast and > -# broadcast WEP keys. > -network={ > - ssid="1x-test" > - key_mgmt=IEEE8021X > - eap=TLS > - identity="user@example.com" > - ca_cert="/etc/cert/ca.pem" > - client_cert="/etc/cert/user.pem" > - private_key="/etc/cert/user.prv" > - private_key_passwd="password" > - eapol_flags=3 > -} > - > - > -# LEAP with dynamic WEP keys > -network={ > - ssid="leap-example" > - key_mgmt=IEEE8021X > - eap=LEAP > - identity="user" > - password="foobar" > -} > - > -# Plaintext connection (no WPA, no IEEE 802.1X) > -network={ > - ssid="plaintext-test" > - key_mgmt=NONE > -} > - > - > -# Shared WEP key connection (no WPA, no IEEE 802.1X) > -network={ > - ssid="static-wep-test" > - key_mgmt=NONE > - wep_key0="abcde" > - wep_key1=0102030405 > - wep_key2="1234567890123" > - wep_tx_keyidx=0 > - priority=5 > -} > - > - > -# Shared WEP key connection (no WPA, no IEEE 802.1X) using Shared Key > -# IEEE 802.11 authentication > -network={ > - ssid="static-wep-test2" > - key_mgmt=NONE > - wep_key0="abcde" > - wep_key1=0102030405 > - wep_key2="1234567890123" > - wep_tx_keyidx=0 > - priority=5 > - auth_alg=SHARED > -} > - > - > -# IBSS/ad-hoc network with WPA-None/TKIP. > -network={ > - ssid="test adhoc" > - mode=1 > - proto=WPA > - key_mgmt=WPA-NONE > - pairwise=NONE > - group=TKIP > - psk="secret passphrase" > -} > - > - > -# Catch all example that allows more or less all configuration modes > -network={ > - ssid="example" > - scan_ssid=1 > - key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE > - pairwise=CCMP TKIP > - group=CCMP TKIP WEP104 WEP40 > - psk="very secret passphrase" > - eap=TTLS PEAP TLS > - identity="user@example.com" > - password="foobar" > - ca_cert="/etc/cert/ca.pem" > - client_cert="/etc/cert/user.pem" > - private_key="/etc/cert/user.prv" > - private_key_passwd="password" > - phase1="peaplabel=0" > -} > - > -# Example of EAP-TLS with smartcard (openssl engine) > -network={ > - ssid="example" > - key_mgmt=WPA-EAP > - eap=TLS > - proto=RSN > - pairwise=CCMP TKIP > - group=CCMP TKIP > - identity="user@example.com" > - ca_cert="/etc/cert/ca.pem" > - client_cert="/etc/cert/user.pem" > - > - engine=1 > - > - # The engine configured here must be available. Look at > - # OpenSSL engine support in the global section. > - # The key available through the engine must be the private key > - # matching the client certificate configured above. > - > - # use the opensc engine > - #engine_id="opensc" > - #key_id="45" > - > - # use the pkcs11 engine > - engine_id="pkcs11" > - key_id="id_45" > - > - # Optional PIN configuration; this can be left out and PIN will be > - # asked through the control interface > - pin="1234" > -} > - > -# Example configuration showing how to use an inlined blob as a CA certificate > -# data instead of using external file > -network={ > - ssid="example" > - key_mgmt=WPA-EAP > - eap=TTLS > - identity="user@example.com" > - anonymous_identity="anonymous@example.com" > - password="foobar" > - ca_cert="blob://exampleblob" > - priority=20 > -} > - > -blob-base64-exampleblob={ > -SGVsbG8gV29ybGQhCg== > -} > - > - > -# Wildcard match for SSID (plaintext APs only). This example select any > -# open AP regardless of its SSID. > -network={ > - key_mgmt=NONE > -} > +device_name=Blaze > +manufacturer=TI > +model_name=Wilink > +model_number=wl18xx > +serial_number=12345 > +driver_param=use_multi_chan_concurrent=1 use_p2p_group_interface=1 > +# Timeout in seconds to detect STA inactivity (default: 300 seconds) > +# > +# This timeout value is used in P2P GO mode to clean up > +# inactive stations. > +p2p_go_max_inactivity=60 > +p2p_go_ht40=1 > +p2p_multi_chan=1 > +disassoc_low_ack=1 > +concurrent_sched_scan=1 > -- > 1.7.9 > > _______________________________________________ > meta-arago mailing list > meta-arago@arago-project.org > http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago