All of lore.kernel.org
 help / color / mirror / Atom feed
From: Josh Triplett <josh@joshtriplett.org>
To: Rashika Kheria <rashika.kheria@gmail.com>
Cc: linux-kernel@vger.kernel.org,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Jiri Slaby <jslaby@suse.cz>
Subject: Re: [PATCH 1/2] drivers: tty: Mark the functions as static in n_gsm.c
Date: Mon, 16 Dec 2013 03:10:53 -0800	[thread overview]
Message-ID: <20131216111052.GA23211@leaf> (raw)
In-Reply-To: <0d40902c95942d272a70b1d85b4e311d0cc7afa4.1387191158.git.rashika.kheria@gmail.com>

On Mon, Dec 16, 2013 at 04:28:24PM +0530, Rashika Kheria wrote:
> Marks the functions gsm_cleanup_mux(), gsm_activate_mux(),
> gsm_free_mux(), gsm_alloc_mux() and gsm_change_mtu() as static in
> n_gsm.c because they are not used outside this file.
> 
> Also, drop the EXPORT_SYMBOL_GPL for the above mentioned functions
> because nothing else in the kernel calls them.
> 
> This eliminates the following warnings in n_gsm.c:
> drivers/tty/n_gsm.c:2022:6: warning: no previous prototype for ‘gsm_cleanup_mux’ [-Wmissing-prototypes]
> drivers/tty/n_gsm.c:2076:5: warning: no previous prototype for ‘gsm_activate_mux’ [-Wmissing-prototypes]
> drivers/tty/n_gsm.c:2120:6: warning: no previous prototype for ‘gsm_free_mux’ [-Wmissing-prototypes]
> drivers/tty/n_gsm.c:2156:17: warning: no previous prototype for ‘gsm_alloc_mux’ [-Wmissing-prototypes]
> drivers/tty/n_gsm.c:2714:5: warning: no previous prototype for ‘gsm_change_mtu’ [-Wmissing-prototypes]
> 
> Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>

Reviewed-by: Josh Triplett <josh@joshtriplett.org>

>  drivers/tty/n_gsm.c |   14 +++++---------
>  1 file changed, 5 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
> index c0f76da..6ca9fbb 100644
> --- a/drivers/tty/n_gsm.c
> +++ b/drivers/tty/n_gsm.c
> @@ -2019,7 +2019,7 @@ static void gsm_error(struct gsm_mux *gsm,
>   *	and then shut down each device hanging up the channels as we go.
>   */
>  
> -void gsm_cleanup_mux(struct gsm_mux *gsm)
> +static void gsm_cleanup_mux(struct gsm_mux *gsm)
>  {
>  	int i;
>  	struct gsm_dlci *dlci = gsm->dlci[0];
> @@ -2062,7 +2062,6 @@ void gsm_cleanup_mux(struct gsm_mux *gsm)
>  		kfree(txq);
>  	INIT_LIST_HEAD(&gsm->tx_list);
>  }
> -EXPORT_SYMBOL_GPL(gsm_cleanup_mux);
>  
>  /**
>   *	gsm_activate_mux	-	generic GSM setup
> @@ -2073,7 +2072,7 @@ EXPORT_SYMBOL_GPL(gsm_cleanup_mux);
>   *	finally kick off connecting to DLCI 0 on the modem.
>   */
>  
> -int gsm_activate_mux(struct gsm_mux *gsm)
> +static int gsm_activate_mux(struct gsm_mux *gsm)
>  {
>  	struct gsm_dlci *dlci;
>  	int i = 0;
> @@ -2109,7 +2108,6 @@ int gsm_activate_mux(struct gsm_mux *gsm)
>  	gsm->dead = 0;		/* Tty opens are now permissible */
>  	return 0;
>  }
> -EXPORT_SYMBOL_GPL(gsm_activate_mux);
>  
>  /**
>   *	gsm_free_mux		-	free up a mux
> @@ -2117,13 +2115,12 @@ EXPORT_SYMBOL_GPL(gsm_activate_mux);
>   *
>   *	Dispose of allocated resources for a dead mux
>   */
> -void gsm_free_mux(struct gsm_mux *gsm)
> +static void gsm_free_mux(struct gsm_mux *gsm)
>  {
>  	kfree(gsm->txframe);
>  	kfree(gsm->buf);
>  	kfree(gsm);
>  }
> -EXPORT_SYMBOL_GPL(gsm_free_mux);
>  
>  /**
>   *	gsm_free_muxr		-	free up a mux
> @@ -2153,7 +2150,7 @@ static inline void mux_put(struct gsm_mux *gsm)
>   *	Creates a new mux ready for activation.
>   */
>  
> -struct gsm_mux *gsm_alloc_mux(void)
> +static struct gsm_mux *gsm_alloc_mux(void)
>  {
>  	struct gsm_mux *gsm = kzalloc(sizeof(struct gsm_mux), GFP_KERNEL);
>  	if (gsm == NULL)
> @@ -2185,7 +2182,6 @@ struct gsm_mux *gsm_alloc_mux(void)
>  
>  	return gsm;
>  }
> -EXPORT_SYMBOL_GPL(gsm_alloc_mux);
>  
>  /**
>   *	gsmld_output		-	write to link
> @@ -2711,7 +2707,7 @@ static void gsm_mux_rx_netchar(struct gsm_dlci *dlci,
>  	return;
>  }
>  
> -int gsm_change_mtu(struct net_device *net, int new_mtu)
> +static int gsm_change_mtu(struct net_device *net, int new_mtu)
>  {
>  	struct gsm_mux_net *mux_net = (struct gsm_mux_net *)netdev_priv(net);
>  	if ((new_mtu < 8) || (new_mtu > mux_net->dlci->gsm->mtu))
> -- 
> 1.7.9.5
> 

      parent reply	other threads:[~2013-12-16 11:11 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-12-16 10:58 [PATCH 1/2] drivers: tty: Mark the functions as static in n_gsm.c Rashika Kheria
2013-12-16 11:01 ` [PATCH 2/2] drivers: tty: Mark the function hvc_poll_init() as static in hvc_console.c Rashika Kheria
2013-12-16 11:01   ` Rashika Kheria
2013-12-16 11:11   ` Josh Triplett
2013-12-16 11:11     ` Josh Triplett
2013-12-16 11:10 ` Josh Triplett [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20131216111052.GA23211@leaf \
    --to=josh@joshtriplett.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jslaby@suse.cz \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rashika.kheria@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.