From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V3 00/14] ARM: AM43xx: Update support for AM4372 SoC
Date: Wed, 18 Dec 2013 15:07:47 -0500 [thread overview]
Message-ID: <20131218200747.GC420@bill-the-cat> (raw)
In-Reply-To: <1386667944-20748-1-git-send-email-lokeshvutla@ti.com>
On Tue, Dec 10, 2013 at 03:02:10PM +0530, Lokesh Vutla wrote:
> This Patch series updates support for AM4372 EPOS and GP EVM boards.
> AM4372 is a low cost Cortex-A9 based application processor targeted at existing
> ARM9/ARM11 base of customers that need more processing capabilities.
> Currently there are two boards with AM4372 SoC: EPOS and GP EVM.
> Except for few differences like oscillator clock and SDRAM both EPOS and GP EVM
> boards are similar.
> EPOS EVM:
> OSC clk : 25MHz
> DDR : LPDDR2 @ 266MHz (MT42L256M32D2LG-25 WT:A)
> GP EVM:
> OSC clk : 24MHz
> DDR : DDR3 @ 400MHz(MT41K512M8RH)
>
> This patch series is applied on top of Mainline U-Boot Tree and two
> patches mentioned below:
> git://git.denx.de/u-boot.git master
> http://patchwork.ozlabs.org/patch/288175/
>
> Testing:
> -> Boot tested on AM4372 EPOS and GP EVMs, Beaglebone Black.
> -> verified MAKEALL -s am33xx.
> -> Ran checkpatch on all patches.
>
> Changes Since V2:
> -> Updating the base offsets only for AM43xx
> -> Populated DPLLs data for all OPPs and SYS CLK inputs and the correct values
> to be read from eFuse.
> -> Seperated out ioregs changes into a new patch.
>
> Changes Since V1:
> As per Vaibhav's and Tom's Comments:
> -> Updated the mux data not to use DSPULLUDEN.
> -> Reused the emif4d file for configuring emif4d5 registers.
> -> Updated the code with comments.
> -> Rebased on top of Current U-Boot mainline.
>
> Lokesh Vutla (12):
> ARM: AM43xx: Update the base addresses of modules
> ARM: AM43xx: Adapt to ti_armv7_common.h config file
> ARM: AM43xx: Add L2 Support
> ARM: AM43xx: Add extra ENV settings
> ARM: AM43xx: Select clk source for Timer2
> ARM: AM43xx: Update Current Booting devices list
> ARM: AM43xx: mux: Update mux data
> ARM: AM43xx: clocks: Update DPLL details
> ARM: AM33xx+: Update ioregs to pass different values
> ARM: AM43xx: EPOS_EVM: Add support for LPDDR2
> ARM: AM43xx: GP_EVM: Add support for DDR3
> ARM: AM43xx: Add Maintainer
>
> Sekhar Nori (2):
> ARM: AM43XX: board: add support for reading onboard EEPROM
> ARM: AM43XX: Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG support
>
> arch/arm/cpu/armv7/am33xx/clock.c | 12 +-
> arch/arm/cpu/armv7/am33xx/clock_am33xx.c | 15 +
> arch/arm/cpu/armv7/am33xx/clock_am43xx.c | 12 +-
> arch/arm/cpu/armv7/am33xx/ddr.c | 146 +++++++-
> arch/arm/cpu/armv7/am33xx/emif4.c | 25 +-
> arch/arm/cpu/armv7/omap-common/emif-common.c | 14 -
> arch/arm/include/asm/arch-am33xx/clock.h | 7 +-
> arch/arm/include/asm/arch-am33xx/clocks_am33xx.h | 3 +
> arch/arm/include/asm/arch-am33xx/cpu.h | 24 +-
> arch/arm/include/asm/arch-am33xx/ddr_defs.h | 41 ++-
> arch/arm/include/asm/arch-am33xx/gpio.h | 12 +
> arch/arm/include/asm/arch-am33xx/hardware.h | 7 -
> arch/arm/include/asm/arch-am33xx/hardware_am33xx.h | 2 +
> arch/arm/include/asm/arch-am33xx/hardware_am43xx.h | 16 +
> arch/arm/include/asm/arch-am33xx/mux_am43xx.h | 45 +++
> arch/arm/include/asm/arch-am33xx/omap.h | 4 +-
> arch/arm/include/asm/arch-am33xx/spl.h | 13 +-
> arch/arm/include/asm/emif.h | 26 ++
> board/isee/igep0033/board.c | 10 +-
> board/phytec/pcm051/board.c | 12 +-
> board/siemens/dxr2/board.c | 10 +-
> board/siemens/pxm2/board.c | 10 +-
> board/siemens/rut/board.c | 10 +-
> board/ti/am335x/board.c | 40 ++-
> board/ti/am43xx/board.c | 355 +++++++++++++++++++-
> board/ti/am43xx/board.h | 36 ++
> board/ti/am43xx/mux.c | 35 +-
> board/ti/ti814x/evm.c | 4 +-
> board/ti/ti816x/evm.c | 12 +-
> boards.cfg | 2 +-
> include/configs/am43xx_evm.h | 204 +++++------
> 31 files changed, 983 insertions(+), 181 deletions(-)
Applied to u-boot-ti/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131218/31e87405/attachment.pgp>
next prev parent reply other threads:[~2013-12-18 20:07 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-10 9:32 [U-Boot] [PATCH V3 00/14] ARM: AM43xx: Update support for AM4372 SoC Lokesh Vutla
2013-12-10 9:32 ` [U-Boot] [PATCH V3 01/14] ARM: AM43xx: Update the base addresses of modules Lokesh Vutla
2013-12-10 9:32 ` [U-Boot] [PATCH V3 02/14] ARM: AM43xx: Adapt to ti_armv7_common.h config file Lokesh Vutla
2013-12-10 9:32 ` [U-Boot] [PATCH V3 03/14] ARM: AM43xx: Add L2 Support Lokesh Vutla
2013-12-10 9:32 ` [U-Boot] [PATCH V3 04/14] ARM: AM43xx: Add extra ENV settings Lokesh Vutla
2013-12-10 9:32 ` [U-Boot] [PATCH V3 05/14] ARM: AM43XX: board: add support for reading onboard EEPROM Lokesh Vutla
2013-12-10 9:32 ` [U-Boot] [PATCH V3 06/14] ARM: AM43XX: Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG support Lokesh Vutla
2013-12-10 9:32 ` [U-Boot] [PATCH V3 07/14] ARM: AM43xx: Select clk source for Timer2 Lokesh Vutla
2013-12-10 9:32 ` [U-Boot] [PATCH V3 08/14] ARM: AM43xx: Update Current Booting devices list Lokesh Vutla
2013-12-10 9:32 ` [U-Boot] [PATCH V3 09/14] ARM: AM43xx: mux: Update mux data Lokesh Vutla
2013-12-10 9:32 ` [U-Boot] [PATCH V3 10/14] ARM: AM43xx: clocks: Update DPLL details Lokesh Vutla
2013-12-10 9:32 ` [U-Boot] [PATCH V3 11/14] ARM: AM33xx+: Update ioregs to pass different values Lokesh Vutla
2013-12-10 9:32 ` [U-Boot] [PATCH V3 12/14] ARM: AM43xx: EPOS_EVM: Add support for LPDDR2 Lokesh Vutla
2013-12-10 9:32 ` [U-Boot] [PATCH V3 13/14] ARM: AM43xx: GP_EVM: Add support for DDR3 Lokesh Vutla
2013-12-10 9:32 ` [U-Boot] [PATCH V3 14/14] ARM: AM43xx: Add Maintainer Lokesh Vutla
2013-12-15 8:36 ` [U-Boot] [PATCH V3 00/14] ARM: AM43xx: Update support for AM4372 SoC Vaibhav Bedia
2013-12-18 20:07 ` Tom Rini [this message]
2013-12-19 17:00 ` Tom Rini
2013-12-19 17:57 ` Lokesh Vutla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131218200747.GC420@bill-the-cat \
--to=trini@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.