[PATCH v2 4/8] arm: dts: sun4i: rename clock node names to clk@N

[maxime.ripard@free-electrons.com (Maxime Ripard)]

On Wed, Jan 08, 2014 at 09:38:52AM +0800, Chen-Yu Tsai wrote:
> On Wed, Jan 8, 2014 at 6:38 AM, Maxime Ripard
> <maxime.ripard@free-electrons.com> wrote:
> > On Mon, Jan 06, 2014 at 01:58:08PM +0800, Chen-Yu Tsai wrote:
> >> Device tree naming conventions state that node names should match
> >> node function. Change fully functioning clock nodes to match.
> >>
> >> Also add the output name for pll5 to use as the clock name.
> >>
> >> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> >> ---
> >>  arch/arm/boot/dts/sun4i-a10.dtsi | 26 +++++++++++++++-----------
> >>  1 file changed, 15 insertions(+), 11 deletions(-)
> >>
> >> diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
> >> index 3ba2b46..45d5283 100644
> >> --- a/arch/arm/boot/dts/sun4i-a10.dtsi
> >> +++ b/arch/arm/boot/dts/sun4i-a10.dtsi
> >> @@ -50,42 +50,46 @@
> >>                       clock-frequency = <0>;
> >>               };
> >>
> >> -             osc24M: osc24M at 01c20050 {
> >> +             osc24M: clk at 01c20050 {
> >>                       #clock-cells = <0>;
> >>                       compatible = "allwinner,sun4i-osc-clk";
> >>                       reg = <0x01c20050 0x4>;
> >>                       clock-frequency = <24000000>;
> >> +                     clock-output-names = "osc24M";
> >>               };
> >>
> >> -             osc32k: osc32k {
> >> +             osc32k: clk at 0 {
> >>                       #clock-cells = <0>;
> >>                       compatible = "fixed-clock";
> >>                       clock-frequency = <32768>;
> >> +                     clock-output-names = "osc32k";
> >>               };
> >>
> >> -             pll1: pll1 at 01c20000 {
> >> +             pll1: clk at 01c20000 {
> >>                       #clock-cells = <0>;
> >>                       compatible = "allwinner,sun4i-pll1-clk";
> >>                       reg = <0x01c20000 0x4>;
> >>                       clocks = <&osc24M>;
> >> +                     clock-output-names = "pll1";
> >>               };
> >>
> >> -             pll4: pll4 at 01c20018 {
> >> +             pll4: clk at 01c20018 {
> >>                       #clock-cells = <0>;
> >>                       compatible = "allwinner,sun4i-pll1-clk";
> >>                       reg = <0x01c20018 0x4>;
> >>                       clocks = <&osc24M>;
> >> +                     clock-output-names = "pll4";
> >>               };
> >>
> >> -             pll5: pll5 at 01c20020 {
> >> +             pll5: clk at 01c20020 {
> >>                       #clock-cells = <1>;
> >>                       compatible = "allwinner,sun4i-pll5-clk";
> >>                       reg = <0x01c20020 0x4>;
> >>                       clocks = <&osc24M>;
> >> -                     clock-output-names = "pll5_ddr", "pll5_other";
> >> +                     clock-output-names = "pll5_ddr", "pll5_other", "pll5";
> >
> > Hmmm, I don't really like that bit too much.
> >
> > This "pll5" clock doesn't actually exist at the hardware point of
> > view, which is not really what the DT is used for.
> 
> You are right. pll5 only has 2 outputs. I was matching the format of
> pll6, which I'd like to include in this discussion.
> 
> Does pll6 actually have 3 outputs? or are we just using the third
> output as a shortcut for mbus input of pll6*2 ?

Hmmm, indeed. I don't really get why pll6 has a third output
either. Emilio?

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140109/6051ae5c/attachment.sig>