From: Albert ARIBAUD <albert.u.boot@aribaud.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v5 00/30] zynq: More boards support
Date: Fri, 10 Jan 2014 15:58:13 +0100 [thread overview]
Message-ID: <20140110155813.3e5bedde@lilith> (raw)
In-Reply-To: <bce0b4da-ce82-43fc-9765-6f2013c88fe9@AM1EHSMHS018.ehs.local>
Hi Jagannadha,
On Thu, 9 Jan 2014 01:48:01 +0530, Jagannadha Sutradharudu Teki
<jagannadha.sutradharudu-teki@xilinx.com> wrote:
> These changes are from u-boot-xlnx.git repo from git.xilinx.com
> and in addition of basic fdt support. This repo is well tested
> on xilinx zynq platform, hence pushing the same on upstream.
>
> Excluded qspi and nand changes from previous series.
>
> --
> Thanks,
> Jagan.
>
> Changes for v5:
> - rebase to u-boot-arm/master
> - Enabled CONFIG_DEFAULT_DEVICE_TREE in pre-board config files.
> - Updated build steps on doc/README.zynq
> Changes for v4:
> - rebase to master
> - Removed CONFIG_SYS_NO_FLASH in zynq-common.h
> Changes for v3:
> - Removed CONFIG_ZYNQ_QSPI
> - Removed CONFIG_NAND_ZYNQ
> - Removed CONFIG_SYS_PROMPT_HUSH_PS2
> - Documented bootmode detection code
> - Added comments
>
> Jagannadha Sutradharudu Teki (30):
> zynq: Enable CONFIG_FIT_VERBOSE
> zynq: Enable Boot FreeBSD/vxWorks
> zynq: Cleanup on miscellaneous configs
> zynq: Cleanup on memory configs
> zynq: Minor config cleanup
> zynq: Enable cache options
> zynq: Add UART0, UART1 configs support
> zynq: Add GEM0, GEM1 configs support
> zynq-common: Rename zynq with zynq-common
> doc: zynq: Add information on zynq u-boot
> zynq: Add zynq zc70x board support
> zynq: Add zynq zed board support
> zynq: Move CONFIG_SYS_SDRAM_SIZE to pre-board configs
> zynq-common: Define exact TEXT_BASE
> zynq: zc70x: Add Catalyst 24WC08 EEPROM config support
> zynq: Add zynq microzed board support
> zynq: Add zynq_zc770 xm010 board support
> zynq: Add zynq_zc770 xm013 board support
> zynq: Add zynq_zc770 xm012 board support
> zynq: Add support to find bootmode
> zynq-common: Define default environment
> zynq-common: Change Env. Sector size to 128Kb
> zynq-common: Define flash env. partition
> zynq-common: Define CONFIG_ENV_OVERWRITE
> dts: zynq: Add basic fdt support
> gpio: zynq: Add dummy gpio routines
> zynq-common: Enable verified boot(RSA)
> dts: zynq: Add more zynq dts files
> zynq: Enable CONFIG_DEFAULT_DEVICE_TREE
> doc: Update the zynq u-boot status
>
> arch/arm/cpu/armv7/zynq/slcr.c | 6 +
> arch/arm/dts/zynq-7000.dtsi | 13 ++
> arch/arm/include/asm/arch-zynq/gpio.h | 25 +++
> arch/arm/include/asm/arch-zynq/sys_proto.h | 1 +
> board/xilinx/dts/zynq-microzed.dts | 14 ++
> board/xilinx/dts/zynq-zc702.dts | 14 ++
> board/xilinx/dts/zynq-zc706.dts | 14 ++
> board/xilinx/dts/zynq-zc770-xm010.dts | 14 ++
> board/xilinx/dts/zynq-zc770-xm012.dts | 14 ++
> board/xilinx/dts/zynq-zc770-xm013.dts | 14 ++
> board/xilinx/dts/zynq-zed.dts | 14 ++
> board/xilinx/zynq/board.c | 25 +++
> boards.cfg | 8 +-
> doc/README.zynq | 94 ++++++++++++
> include/configs/zynq-common.h | 238 +++++++++++++++++++++++++++++
> include/configs/zynq.h | 139 -----------------
> include/configs/zynq_microzed.h | 26 ++++
> include/configs/zynq_zc70x.h | 29 ++++
> include/configs/zynq_zc770.h | 42 +++++
> include/configs/zynq_zed.h | 27 ++++
> 20 files changed, 630 insertions(+), 141 deletions(-)
> create mode 100644 arch/arm/dts/zynq-7000.dtsi
> create mode 100644 arch/arm/include/asm/arch-zynq/gpio.h
> create mode 100644 board/xilinx/dts/zynq-microzed.dts
> create mode 100644 board/xilinx/dts/zynq-zc702.dts
> create mode 100644 board/xilinx/dts/zynq-zc706.dts
> create mode 100644 board/xilinx/dts/zynq-zc770-xm010.dts
> create mode 100644 board/xilinx/dts/zynq-zc770-xm012.dts
> create mode 100644 board/xilinx/dts/zynq-zc770-xm013.dts
> create mode 100644 board/xilinx/dts/zynq-zed.dts
> create mode 100644 doc/README.zynq
> create mode 100644 include/configs/zynq-common.h
> delete mode 100644 include/configs/zynq.h
> create mode 100644 include/configs/zynq_microzed.h
> create mode 100644 include/configs/zynq_zc70x.h
> create mode 100644 include/configs/zynq_zc770.h
> create mode 100644 include/configs/zynq_zed.h
>
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
prev parent reply other threads:[~2014-01-10 14:58 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-08 20:18 [U-Boot] [PATCH v5 00/30] zynq: More boards support Jagannadha Sutradharudu Teki
2014-01-09 14:32 ` Jagan Teki
2014-01-10 14:58 ` Albert ARIBAUD [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140110155813.3e5bedde@lilith \
--to=albert.u.boot@aribaud.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.