From: Tim Jester-Pfadt <t.jp@gmx.de>
To: gregkh@linuxfoundation.org
Cc: Larry.Finger@lwfinger.net, standby24x7@gmail.com,
devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org
Subject: [PATCH] Staging: rtl8188eu: Fixed whitespace related coding style issues
Date: Fri, 10 Jan 2014 23:57:59 +0100 [thread overview]
Message-ID: <20140110225759.GA8720@archlinux.uni-trier.de> (raw)
This patch fixes two spaces at the start of the line aswell as all space after
opening parenthesis and space before closeing parenthesis checkpatch.pl warnings
in rtw_mlme.h
Signed-off-by: Tim Jester-Pfadt <t.jp@gmx.de>
---
drivers/staging/rtl8188eu/include/rtw_mlme.h | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/staging/rtl8188eu/include/rtw_mlme.h b/drivers/staging/rtl8188eu/include/rtw_mlme.h
index 33965ca..144f79c 100644
--- a/drivers/staging/rtl8188eu/include/rtw_mlme.h
+++ b/drivers/staging/rtl8188eu/include/rtw_mlme.h
@@ -129,17 +129,17 @@ struct rt_link_detect {
struct profile_info {
u8 ssidlen;
- u8 ssid[ WLAN_SSID_MAXLEN ];
- u8 peermac[ ETH_ALEN ];
+ u8 ssid[WLAN_SSID_MAXLEN];
+ u8 peermac[ETH_ALEN];
};
struct tx_invite_req_info {
u8 token;
u8 benable;
- u8 go_ssid[ WLAN_SSID_MAXLEN ];
+ u8 go_ssid[WLAN_SSID_MAXLEN];
u8 ssidlen;
- u8 go_bssid[ ETH_ALEN ];
- u8 peer_macaddr[ ETH_ALEN ];
+ u8 go_bssid[ETH_ALEN];
+ u8 peer_macaddr[ETH_ALEN];
u8 operating_ch; /* This information will be set by using the
* p2p_set op_ch=x */
u8 peer_ch; /* The listen channel for peer P2P device */
@@ -182,9 +182,9 @@ struct tx_nego_req_info {
};
struct group_id_info {
- u8 go_device_addr[ ETH_ALEN ]; /* The GO's device address of
+ u8 go_device_addr[ETH_ALEN]; /* The GO's device address of
* this P2P group */
- u8 ssid[ WLAN_SSID_MAXLEN ]; /* The SSID of this P2P group */
+ u8 ssid[WLAN_SSID_MAXLEN]; /* The SSID of this P2P group */
};
struct scan_limit_info {
@@ -388,7 +388,7 @@ struct mlme_priv {
u8 *assoc_rsp;
u32 assoc_rsp_len;
-#if defined (CONFIG_88EU_AP_MODE)
+#if defined(CONFIG_88EU_AP_MODE)
/* Number of associated Non-ERP stations (i.e., stations using 802.11b
* in 802.11g BSS) */
int num_sta_non_erp;
@@ -472,7 +472,7 @@ void rtw_join_timeout_handler(void *FunctionContext);
void _rtw_scan_timeout_handler(void *FunctionContext);
void rtw_free_network_queue(struct adapter *adapter, u8 isfreeall);
int rtw_init_mlme_priv(struct adapter *adapter);
-void rtw_free_mlme_priv (struct mlme_priv *pmlmepriv);
+void rtw_free_mlme_priv(struct mlme_priv *pmlmepriv);
int rtw_select_and_join_from_scanned_queue(struct mlme_priv *pmlmepriv);
int rtw_set_key(struct adapter *adapter, struct security_priv *psecuritypriv,
int keyid, u8 set_tx);
@@ -572,7 +572,7 @@ struct wlan_network *rtw_get_oldest_wlan_network(struct __queue *scanned_queue);
void rtw_free_assoc_resources(struct adapter *adapter, int lock_scanned_queue);
void rtw_indicate_disconnect(struct adapter *adapter);
void rtw_indicate_connect(struct adapter *adapter);
-void rtw_indicate_scan_done( struct adapter *padapter, bool aborted);
+void rtw_indicate_scan_done(struct adapter *padapter, bool aborted);
void rtw_scan_abort(struct adapter *adapter);
int rtw_restruct_sec_ie(struct adapter *adapter, u8 *in_ie, u8 *out_ie,
@@ -588,7 +588,7 @@ void rtw_get_encrypt_decrypt_from_registrypriv(struct adapter *adapter);
void _rtw_join_timeout_handler(struct adapter *adapter);
void rtw_scan_timeout_handler(struct adapter *adapter);
- void rtw_dynamic_check_timer_handlder(struct adapter *adapter);
+void rtw_dynamic_check_timer_handlder(struct adapter *adapter);
#define rtw_is_scan_deny(adapter) false
#define rtw_clear_scan_deny(adapter) do {} while (0)
#define rtw_set_scan_deny_timer_hdl(adapter) do {} while (0)
@@ -605,7 +605,7 @@ int _rtw_enqueue_network(struct __queue *queue, struct wlan_network *pnetwork);
struct wlan_network *_rtw_dequeue_network(struct __queue *queue);
- struct wlan_network *_rtw_alloc_network(struct mlme_priv *pmlmepriv);
+struct wlan_network *_rtw_alloc_network(struct mlme_priv *pmlmepriv);
void _rtw_free_network(struct mlme_priv *pmlmepriv,
--
1.8.5.2
reply other threads:[~2014-01-10 22:59 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140110225759.GA8720@archlinux.uni-trier.de \
--to=t.jp@gmx.de \
--cc=Larry.Finger@lwfinger.net \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=standby24x7@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.