From: "Michael S. Tsirkin" <mst@redhat.com>
To: 李义 <yilikernel@gmail.com>
Cc: kvm@vger.kernel.org, Alex Williamson <alex.williamson@redhat.com>
Subject: Re: the reboot will hang at guest os when output "irq 11: nobody cared (try booting with the "irqpoll" option)"
Date: Wed, 15 Jan 2014 10:09:21 +0200 [thread overview]
Message-ID: <20140115080921.GA1127@redhat.com> (raw)
In-Reply-To: <CAJfdMYAqCof5rL7Cz1ZGEXhet5HS0u-eU+51z6FyJAFBdFAOXg@mail.gmail.com>
On Wed, Jan 15, 2014 at 02:48:35PM +0800, 李义 wrote:
> Hi ALL,
>
> i have meet kvm guest os issue at redhat7beta.
>
> Host os:
> iredhat7 Beta
> #virsh version
> Compiled against library: libvirt 1.1.1
> Using library: libvirt 1.1.1
> Using API: QEMU 1.1.1
> Running hypervisor: QEMU 1.5.3
>
> guest os:
> 2.6.32.43 x86-64
Which OS is this, exactly?
Does this reproduce with a newer guest?
> Problem:
> reboot at the guest os, the guest os will hang.(i have not find the
> reproduce method)
>
> pls: the below is the crash info.
>
> [ 3.446282] Adding 2104504k swap on /dev/vda2. Priority:-1
> extents:1 across:2104504k
> [ 63.862133] md: stopping all md devices.
> [ 64.960702] ACPI: Preparing to enter system sleep state S5
> [ 64.961280] Disabling non-boot CPUs ...
> [ 66.370651] irq 11: nobody cared (try booting with the "irqpoll" option)
What uses irq 11? Could you check with lspci before you try to shutdown?
> [ 66.370656] Pid: 0, comm: swapper Not tainted
> 2.6.32.43_guest-1.0.8.kvmguest-default #1
> [ 66.370658] Call Trace:
> [ 66.370660] <IRQ> [<ffffffff8107b176>] __report_bad_irq+0x26/0xa0
> [ 66.370687] [<ffffffff8107b37c>] note_interrupt+0x18c/0x1d0
> [ 66.370691] [<ffffffff8107bd4d>] handle_fasteoi_irq+0x13d/0x1c0
> [ 66.370701] [<ffffffff8100ee5d>] handle_irq+0x1d/0x30
> [ 66.370704] [<ffffffff8100e557>] do_IRQ+0x67/0xe0
> [ 66.370708] [<ffffffff8100c813>] ret_from_intr+0x0/0x11
> [ 66.370716] [<ffffffff8104ace3>] ? __do_softirq+0x63/0x140
> [ 66.370720] [<ffffffff8100cfcc>] ? call_softirq+0x1c/0x30
> [ 66.370723] [<ffffffff8100ee05>] ? do_softirq+0x65/0xa0
> [ 66.370725] [<ffffffff8104abbd>] ? irq_exit+0x7d/0x90
> [ 66.370728] [<ffffffff8100e560>] ? do_IRQ+0x70/0xe0
> [ 66.370731] [<ffffffff8100c813>] ? ret_from_intr+0x0/0x11
> [ 66.370732] <EOI> [<ffffffff81025586>] ? native_safe_halt+0x6/0x10
> [ 66.370747] [<ffffffff81061d65>] ? atomic_notifier_call_chain+0x15/0x20
> [ 66.370753] [<ffffffff81013f27>] ? default_idle+0x27/0x50
> [ 66.370757] [<ffffffff8100b036>] ? cpu_idle+0x66/0xc0
> [ 66.370772] [<ffffffff81597545>] ? rest_init+0x75/0x80
> [ 66.370786] [<ffffffff81840c42>] ? start_kernel+0x2ed/0x2f9
> [ 66.370790] [<ffffffff818402f4>] ? x86_64_start_reservations+0xfb/0xff
> [ 66.370793] [<ffffffff818403f2>] ? x86_64_start_kernel+0xfa/0x109
> [ 66.370795] handlers:
> [ 66.370796] [<ffffffff8133d7c0>] (vp_interrupt+0x0/0x60)
> [ 66.370810] Disabling IRQ #11
>
> 进程:
> PID: 1943 TASK: ffff88007da18580 CPU: 0 COMMAND: "halt"
> #0 [ffff88007e8b1b98] schedule at ffffffff815b295d
> #1 [ffff88007e8b1ca0] schedule_timeout at ffffffff815b358e
> #2 [ffff88007e8b1d30] schedule_timeout_uninterruptible at ffffffff815b36c9
> #3 [ffff88007e8b1d40] msleep at ffffffff81050f98
> #4 [ffff88007e8b1d50] native_cpu_die at ffffffff8101d81c
> #5 [ffff88007e8b1d80] _cpu_down at ffffffff8159840a
> #6 [ffff88007e8b1de0] disable_nonboot_cpus at ffffffff810461f2
> #7 [ffff88007e8b1e30] kernel_power_off at ffffffff81057321
> #8 [ffff88007e8b1e40] sys_reboot at ffffffff810575dc
> #9 [ffff88007e8b1f80] system_call_fastpath at ffffffff8100bf02
> RIP: 00007f2d9c768c66 RSP: 00007fff4ad666f8 RFLAGS: 00010202
> RAX: 00000000000000a9 RBX: ffffffff8100bf02 RCX: 0000000000000000
> RDX: 000000004321fedc RSI: 0000000028121969 RDI: fffffffffee1dead
> RBP: 0000000000000003 R8: 0000000000000000 R9: ff00000000000000
> R10: 00007fff4ad711e0 R11: 0000000000000202 R12: 0000000000000000
> R13: 00007fff4ad71690 R14: 0000000000000003 R15: 0000000000000002
> ORIG_RAX: 00000000000000a9 CS: 0033 SS: 002b
>
>
>
> struct irq_desc {
> irq = 11,
> timer_rand_state = 0x0,
> kstat_irqs = 0xffff88007f80d598,
> handle_irq = 0xffffffff8107bc10 <handle_fasteoi_irq>,
> chip = 0xffffffff81825e40,
> msi_desc = 0x0,
> handler_data = 0x0,
> chip_data = 0xffffffff817bd4f0,
> action = 0xffff88007efda340,
> status = 8406528,
> depth = 1,
> wake_depth = 0,
> irq_count = 0,
> last_unhandled = 4294908888,
> irqs_unhandled = 0,
> lock = {
> raw_lock = {
> {
> head_tail = 2532349678,
> tickets = {
> head = 38638,
> tail = 38640
> }
> }
> }
> },
> affinity = {{
> bits = {3, 0}
> }},
> node = 0,
> pending_mask = {{
> bits = {0, 0}
> }},
> threads_active = {
> counter = 0
> },
> wait_for_threads = {
> lock = {
> raw_lock = {
> {
> head_tail = 0,
> tickets = {
> head = 0,
> tail = 0
> }
> }
> }
> },
> task_list = {
> next = 0xffffffff817b8ae0,
> prev = 0xffffffff817b8ae0
> }
> },
> dir = 0xffff88007f0045c0,
> name = 0xffffffff8171cd20 "fasteoi"
> }
>
>
>
> thanks
> yili
next prev parent reply other threads:[~2014-01-15 8:09 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-15 6:48 the reboot will hang at guest os when output "irq 11: nobody cared (try booting with the "irqpoll" option)" 李义
2014-01-15 8:09 ` Michael S. Tsirkin [this message]
2014-01-15 8:59 ` 李义
2014-01-15 9:19 ` Michael S. Tsirkin
2014-01-15 23:00 ` Alex Williamson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140115080921.GA1127@redhat.com \
--to=mst@redhat.com \
--cc=alex.williamson@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=yilikernel@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.