From: bjoern <lkml@call-home.ch>
To: dri-devel@lists.freedesktop.org
Subject: Kernel 3.12.x breaks video playback using XBMC on Intel
Date: Wed, 15 Jan 2014 08:21:48 +0100 [thread overview]
Message-ID: <20140115082148.4549087d@ubuntu> (raw)
[-- Attachment #1: Type: text/plain, Size: 837 bytes --]
Hi all,
I sent this initially to the linux-kernel list but suggestion was to
send it to dri-devel.
I use Ubuntu 13.10 x64. I run XBMC Alpha Git 10 using HDMI output.
I use Ubuntu kernels from mainline
(http://kernel.ubuntu.com/~kernel-ppa/mainline)
Kernel 3.8.x / 3.11.10 (and some others kernels) work fine and every
frame is rendered properly.
Problem:
Using kernel 3.12.1 / 3.12.7 (I tested only these two) video playback
skips several frames per second.
Mainboard: Intel DH61AG
BIOS: AGH6110H.86A.0106.2013.0509.1441
CPU: Intel i3-3240
Memory: 4 Gb
One SSD is being used
I am attaching logs from dmesg - there are visible differences between
3.11 and 3.12, e.g.
ACPI: \_SB_.PCI0.TPMX: can't evaluate _ADR (0x5)
ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
ACPI: \_SB_.PCI0.DOCK: can't evaluate _ADR (0x5)
Regards,
Bjoern
[-- Attachment #2: kernel_3.11.10.log --]
[-- Type: text/x-log, Size: 56029 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.11.10-031110-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201311291453 SMP Fri Nov 29 19:54:20 UTC 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.10-031110-generic root=UUID=7f1378fa-0837-48fa-aa07-74ee97a6170a ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d5c0ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d5c10000-0x00000000d630efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d630f000-0x00000000d631efff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000d631f000-0x00000000d6429fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d642a000-0x00000000d670cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d670d000-0x00000000d670dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d670e000-0x00000000d6750fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d6751000-0x00000000d6ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d7800000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: /DH61AG, BIOS AGH6110H.86A.0106.2013.0509.1441 05/09/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x11f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 0D8000000 mask FF8000000 uncachable
[ 0.000000] 4 base 0D7800000 mask FFF800000 uncachable
[ 0.000000] 5 base 11F800000 mask FFF800000 uncachable
[ 0.000000] 6 base 11F600000 mask FFFE00000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 3, base: 3456MB, range: 128MB, type UC
[ 0.000000] reg 4, base: 3448MB, range: 8MB, type UC
[ 0.000000] reg 5, base: 4600MB, range: 8MB, type UC
[ 0.000000] reg 6, base: 4598MB, range: 2MB, type UC
[ 0.000000] total RAM covered: 3950M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 8 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3328MB, range: 128MB, type WB
[ 0.000000] reg 4, base: 3448MB, range: 8MB, type UC
[ 0.000000] reg 5, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 6, base: 4598MB, range: 2MB, type UC
[ 0.000000] reg 7, base: 4600MB, range: 8MB, type UC
[ 0.000000] e820: update [mem 0xd7800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xd7000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd6e0-0x000fd6ef] mapped at [ffff8800000fd6e0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fd1000, 0x01fd1fff] PGTABLE
[ 0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE
[ 0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11f400000-0x11f5fffff]
[ 0.000000] [mem 0x11f400000-0x11f5fffff] page 2M
[ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11f3fffff]
[ 0.000000] [mem 0x11c000000-0x11f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[ 0.000000] [mem 0x100000000-0x11bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
[ 0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0xd5c0ffff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0xd5bfffff] page 2M
[ 0.000000] [mem 0xd5c00000-0xd5c0ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd670d000-0xd670dfff]
[ 0.000000] [mem 0xd670d000-0xd670dfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd6751000-0xd6ffffff]
[ 0.000000] [mem 0xd6751000-0xd67fffff] page 4k
[ 0.000000] [mem 0xd6800000-0xd6ffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x3602c000-0x3700dfff]
[ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 INTEL)
[ 0.000000] ACPI: XSDT 00000000d6313070 00064 (v01 INTEL DH61AG 0000006A AMI 00010013)
[ 0.000000] ACPI: FACP 00000000d631c828 0010C (v05 INTEL DH61AG 0000006A AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000d6313168 096BF (v02 INTEL DH61AG 0000006A INTL 20051117)
[ 0.000000] ACPI: FACS 00000000d6428080 00040
[ 0.000000] ACPI: APIC 00000000d631c938 00072 (v03 INTEL DH61AG 0000006A AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000d631c9b0 00044 (v01 INTEL DH61AG 0000006A AMI 00010013)
[ 0.000000] ACPI: MCFG 00000000d631c9f8 0003C (v01 INTEL DH61AG 0000006A MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000d631ca38 00038 (v01 INTEL DH61AG 0000006A AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000d631ca70 0036D (v01 INTEL DH61AG 0000006A INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000d631cde0 009AA (v01 INTEL DH61AG 0000006A INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000d631d790 00A92 (v01 INTEL DH61AG 0000006A INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11f5fffff]
[ 0.000000] NODE_DATA [mem 0x11f5f7000-0x11f5fbfff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ae00000-ffff88011ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x11f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xd5c0ffff]
[ 0.000000] node 0: [mem 0xd670d000-0xd670dfff]
[ 0.000000] node 0: [mem 0xd6751000-0xd6ffffff]
[ 0.000000] node 0: [mem 0x100000000-0x11f5fffff]
[ 0.000000] On node 0 totalpages: 1005659
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13643 pages used for memmap
[ 0.000000] DMA32 zone: 873151 pages, LIFO batch:31
[ 0.000000] Normal zone: 2008 pages used for memmap
[ 0.000000] Normal zone: 128512 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd5c10000-0xd630efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd630f000-0xd631efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd631f000-0xd6429fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd642a000-0xd670cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd670e000-0xd6750fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd7000000-0xd77fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd7800000-0xdf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011f200000 s86656 r8192 d23936 u524288
[ 0.000000] pcpu-alloc: s86656 r8192 d23936 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 989923
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.10-031110-generic root=UUID=7f1378fa-0837-48fa-aa07-74ee97a6170a ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3859776K/4022636K available (7351K kernel code, 1073K rwdata, 3392K rodata, 1380K init, 1416K bss, 162860K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-255.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16252928 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 3392.373 MHz processor
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.74 BogoMIPS (lpj=13569492)
[ 0.000003] pid_max: default: 32768 minimum: 301
[ 0.000018] Security Framework initialized
[ 0.000031] AppArmor: AppArmor initialized
[ 0.000032] Yama: becoming mindful.
[ 0.000222] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001148] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001569] Mount-cache hash table entries: 256
[ 0.001702] Initializing cgroup subsys memory
[ 0.001711] Initializing cgroup subsys devices
[ 0.001712] Initializing cgroup subsys freezer
[ 0.001713] Initializing cgroup subsys blkio
[ 0.001714] Initializing cgroup subsys perf_event
[ 0.001716] Initializing cgroup subsys hugetlb
[ 0.001735] CPU: Physical Processor ID: 0
[ 0.001736] CPU: Processor Core ID: 0
[ 0.001739] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.001739] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.001742] mce: CPU supports 7 MCE banks
[ 0.001750] CPU0: Thermal monitoring enabled (TM1)
[ 0.001757] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.001757] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.001757] tlb_flushall_shift: 1
[ 0.001849] Freeing SMP alternatives memory: 24K (ffffffff81e67000 - ffffffff81e6d000)
[ 0.003602] ACPI: Core revision 20130517
[ 0.007098] ACPI: All ACPI Tables successfully acquired
[ 0.017895] ftrace: allocating 30589 entries in 120 pages
[ 0.028640] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068347] smpboot: CPU0: Intel(R) Core(TM) i3-3240 CPU @ 3.40GHz (fam: 06, model: 3a, stepping: 09)
[ 0.068353] TSC deadline timer enabled
[ 0.068362] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.068367] ... version: 3
[ 0.068368] ... bit width: 48
[ 0.068369] ... generic registers: 4
[ 0.068369] ... value mask: 0000ffffffffffff
[ 0.068370] ... max period: 0000ffffffffffff
[ 0.068371] ... fixed-purpose events: 3
[ 0.068371] ... event mask: 000000070000000f
[ 0.082510] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.069432] smpboot: Booting Node 0, Processors #1 #2 #3 OK
[ 0.108942] Brought up 4 CPUs
[ 0.108945] smpboot: Total of 4 processors activated (27138.98 BogoMIPS)
[ 0.111595] devtmpfs: initialized
[ 0.112155] EVM: security.selinux
[ 0.112156] EVM: security.SMACK64
[ 0.112157] EVM: security.capability
[ 0.112189] PM: Registering ACPI NVS region [mem 0xd631f000-0xd6429fff] (1093632 bytes)
[ 0.112199] PM: Registering ACPI NVS region [mem 0xd670e000-0xd6750fff] (274432 bytes)
[ 0.112754] regulator-dummy: no parameters
[ 0.112782] RTC time: 6:10:49, date: 01/14/14
[ 0.112804] NET: Registered protocol family 16
[ 0.112890] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.112891] ACPI: bus type PCI registered
[ 0.112892] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.112929] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.112931] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.117715] PCI: Using configuration type 1 for base access
[ 0.118259] bio: create slab <bio-0> at 0
[ 0.118362] ACPI: Added _OSI(Module Device)
[ 0.118364] ACPI: Added _OSI(Processor Device)
[ 0.118365] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.118365] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.119311] ACPI: EC: Look up EC in DSDT
[ 0.120297] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.125253] ACPI: SSDT 00000000d62bb018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.125490] ACPI: Dynamic OEM Table Load:
[ 0.125492] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.131638] ACPI: SSDT 00000000d62bca98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.131894] ACPI: Dynamic OEM Table Load:
[ 0.131895] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.135555] ACPI: SSDT 00000000d62bdc18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.135790] ACPI: Dynamic OEM Table Load:
[ 0.135791] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.139847] ACPI: Interpreter enabled
[ 0.139851] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[ 0.139853] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 0.139862] ACPI: (supports S0 S3 S4 S5)
[ 0.139863] ACPI: Using IOAPIC for interrupt routing
[ 0.139881] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.139962] ACPI: No dock devices found.
[ 0.144373] ACPI: Power Resource [FN00] (off)
[ 0.144424] ACPI: Power Resource [FN01] (off)
[ 0.144474] ACPI: Power Resource [FN02] (off)
[ 0.144524] ACPI: Power Resource [FN03] (off)
[ 0.144573] ACPI: Power Resource [FN04] (off)
[ 0.144969] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.145117] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.145247] acpi PNP0A08:00: ACPI _OSC control (0x18) granted
[ 0.145603] PCI host bridge to bus 0000:00
[ 0.145605] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.145606] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.145607] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.145609] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.145610] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.145611] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.145612] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.145613] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.145614] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.145615] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.145616] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 0.145622] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[ 0.145688] pci 0000:00:02.0: [8086:0152] type 00 class 0x030000
[ 0.145696] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.145700] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.145703] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.145783] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.145803] pci 0000:00:16.0: reg 0x10: [mem 0xf7d2b000-0xf7d2b00f 64bit]
[ 0.145874] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.145940] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
[ 0.145956] pci 0000:00:19.0: reg 0x10: [mem 0xf7d00000-0xf7d1ffff]
[ 0.145964] pci 0000:00:19.0: reg 0x14: [mem 0xf7d29000-0xf7d29fff]
[ 0.145972] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 0.146031] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.146085] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.146104] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d28000-0xf7d283ff]
[ 0.146189] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.146238] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.146264] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.146278] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d20000-0xf7d23fff 64bit]
[ 0.146341] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.146380] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.146403] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.146477] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.146517] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.146540] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.146613] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.146653] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.146684] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.146703] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d27000-0xf7d273ff]
[ 0.146788] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.146834] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.146860] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[ 0.147013] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.147030] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.147037] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.147045] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.147052] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.147059] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.147067] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d26000-0xf7d267ff]
[ 0.147108] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.147162] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.147176] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d25000-0xf7d250ff 64bit]
[ 0.147195] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.147306] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.147391] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.147420] pci 0000:02:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
[ 0.147571] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.147616] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.155803] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.155811] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.155845] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.156246] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.156283] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.156318] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.156353] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.156389] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.156426] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.156461] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.156496] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.156655] ACPI: Enabled 7 GPEs in block 00 to 3F
[ 0.156659] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.156695] Found 1 acpi root devices
[ 0.156760] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.156762] vgaarb: loaded
[ 0.156763] vgaarb: bridge control possible 0000:00:02.0
[ 0.156864] SCSI subsystem initialized
[ 0.156865] ACPI: bus type ATA registered
[ 0.156902] libata version 3.00 loaded.
[ 0.156923] ACPI: bus type USB registered
[ 0.156935] usbcore: registered new interface driver usbfs
[ 0.156941] usbcore: registered new interface driver hub
[ 0.156960] usbcore: registered new device driver usb
[ 0.157028] PCI: Using ACPI for IRQ routing
[ 0.158484] PCI: pci_cache_line_size set to 64 bytes
[ 0.158518] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.158519] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.158520] e820: reserve RAM buffer [mem 0xd5c10000-0xd7ffffff]
[ 0.158521] e820: reserve RAM buffer [mem 0xd670e000-0xd7ffffff]
[ 0.158522] e820: reserve RAM buffer [mem 0xd7000000-0xd7ffffff]
[ 0.158523] e820: reserve RAM buffer [mem 0x11f600000-0x11fffffff]
[ 0.158586] NetLabel: Initializing
[ 0.158587] NetLabel: domain hash size = 128
[ 0.158587] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.158593] NetLabel: unlabeled traffic allowed by default
[ 0.158636] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.158640] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.160662] Switched to clocksource hpet
[ 0.163764] AppArmor: AppArmor Filesystem Enabled
[ 0.163789] pnp: PnP ACPI init
[ 0.163800] ACPI: bus type PNP registered
[ 0.163879] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.163882] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.163892] pnp 00:01: [dma 4]
[ 0.163900] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.163913] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.163979] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.164002] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.164003] system 00:04: [io 0x1000-0x100f] has been reserved
[ 0.164005] system 00:04: [io 0xffff] has been reserved
[ 0.164006] system 00:04: [io 0xffff] has been reserved
[ 0.164007] system 00:04: [io 0x0400-0x0453] could not be reserved
[ 0.164009] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.164010] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.164011] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.164013] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.164034] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.164061] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.164063] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.164152] system 00:07: [io 0x0a00-0x0a0f] has been reserved
[ 0.164153] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.164182] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.164213] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.164341] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.164343] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.164358] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.164514] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.164515] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.164516] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.164518] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.164519] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.164520] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.164521] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.164523] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.164524] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[ 0.164525] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.164527] system 00:0c: [mem 0xdfa00000-0xdfa00fff] has been reserved
[ 0.164528] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.164632] system 00:0d: [mem 0x20000000-0x201fffff] has been reserved
[ 0.164633] system 00:0d: [mem 0x40004000-0x40004fff] has been reserved
[ 0.164635] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.164648] pnp: PnP ACPI: found 14 devices
[ 0.164649] ACPI: bus type PNP unregistered
[ 0.170610] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.170622] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.170627] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.170741] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.170743] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.170744] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.170745] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.170746] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.170747] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.170748] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.170750] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.170751] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.170752] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
[ 0.170753] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.170774] NET: Registered protocol family 2
[ 0.170881] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.171003] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.171095] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.171109] TCP: reno registered
[ 0.171115] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.171129] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.171172] NET: Registered protocol family 1
[ 0.171180] pci 0000:00:02.0: Boot video device
[ 0.208845] PCI: CLS 64 bytes, default 64
[ 0.208879] Trying to unpack rootfs image as initramfs...
[ 0.396380] Freeing initrd memory: 16264K (ffff88003602c000 - ffff88003700e000)
[ 0.396385] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.396387] software IO TLB [mem 0xd1c10000-0xd5c10000] (64MB) mapped at [ffff8800d1c10000-ffff8800d5c0ffff]
[ 0.396553] Scanning for low memory corruption every 60 seconds
[ 0.396757] Initialise module verification
[ 0.396799] audit: initializing netlink socket (disabled)
[ 0.396807] type=2000 audit(1389679848.388:1): initialized
[ 0.415982] bounce pool size: 64 pages
[ 0.415989] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.416695] zbud: loaded
[ 0.416777] VFS: Disk quotas dquot_6.5.2
[ 0.416812] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.417102] fuse init (API version 7.22)
[ 0.417148] msgmni has been set to 7570
[ 0.417457] Key type asymmetric registered
[ 0.417458] Asymmetric key parser 'x509' registered
[ 0.417477] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.417500] io scheduler noop registered
[ 0.417502] io scheduler deadline registered (default)
[ 0.417516] io scheduler cfq registered
[ 0.417638] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.417646] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.417679] intel_idle: MWAIT substates: 0x1120
[ 0.417680] intel_idle: v0.4 model 0x3A
[ 0.417681] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.417746] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.417751] ACPI: Power Button [PWRB]
[ 0.417771] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.417773] ACPI: Power Button [PWRF]
[ 0.417823] ACPI: Fan [FAN0] (off)
[ 0.417839] ACPI: Fan [FAN1] (off)
[ 0.417855] ACPI: Fan [FAN2] (off)
[ 0.417869] ACPI: Fan [FAN3] (off)
[ 0.417884] ACPI: Fan [FAN4] (off)
[ 0.417916] ACPI: Requesting acpi_cpufreq
[ 0.433036] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.433037] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.433170] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.433171] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.433189] GHES: HEST is not enabled!
[ 0.433236] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.434161] Linux agpgart interface v0.103
[ 0.434908] brd: module loaded
[ 0.435297] loop: module loaded
[ 0.435484] libphy: Fixed MDIO Bus: probed
[ 0.435528] tun: Universal TUN/TAP device driver, 1.6
[ 0.435529] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.435558] PPP generic driver version 2.4.2
[ 0.435586] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.435588] ehci-pci: EHCI PCI platform driver
[ 0.435661] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 0.435667] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.435671] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.435683] ehci-pci 0000:00:1a.0: debug port 2
[ 0.439582] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.439597] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d28000
[ 0.448810] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.448824] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.448825] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.448827] usb usb1: Product: EHCI Host Controller
[ 0.448828] usb usb1: Manufacturer: Linux 3.11.10-031110-generic ehci_hcd
[ 0.448829] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.448893] hub 1-0:1.0: USB hub found
[ 0.448896] hub 1-0:1.0: 2 ports detected
[ 0.449016] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 0.449020] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.449024] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.449034] ehci-pci 0000:00:1d.0: debug port 2
[ 0.452924] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.452935] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d27000
[ 0.464813] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.464821] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.464822] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.464823] usb usb2: Product: EHCI Host Controller
[ 0.464824] usb usb2: Manufacturer: Linux 3.11.10-031110-generic ehci_hcd
[ 0.464825] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.464885] hub 2-0:1.0: USB hub found
[ 0.464887] hub 2-0:1.0: 2 ports detected
[ 0.464946] ehci-platform: EHCI generic platform driver
[ 0.464950] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.464951] ohci-platform: OHCI generic platform driver
[ 0.464955] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.464996] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.464999] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[ 0.465181] xhci_hcd 0000:02:00.0: irq 40 for MSI/MSI-X
[ 0.465184] xhci_hcd 0000:02:00.0: irq 41 for MSI/MSI-X
[ 0.465187] xhci_hcd 0000:02:00.0: irq 42 for MSI/MSI-X
[ 0.465190] xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X
[ 0.465193] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
[ 0.465287] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.465288] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.465289] usb usb3: Product: xHCI Host Controller
[ 0.465290] usb usb3: Manufacturer: Linux 3.11.10-031110-generic xhci_hcd
[ 0.465291] usb usb3: SerialNumber: 0000:02:00.0
[ 0.465332] xHCI xhci_add_endpoint called for root hub
[ 0.465333] xHCI xhci_check_bandwidth called for root hub
[ 0.465345] hub 3-0:1.0: USB hub found
[ 0.465351] hub 3-0:1.0: 2 ports detected
[ 0.465392] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.465394] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[ 0.468593] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.468594] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.468595] usb usb4: Product: xHCI Host Controller
[ 0.468596] usb usb4: Manufacturer: Linux 3.11.10-031110-generic xhci_hcd
[ 0.468597] usb usb4: SerialNumber: 0000:02:00.0
[ 0.468635] xHCI xhci_add_endpoint called for root hub
[ 0.468636] xHCI xhci_check_bandwidth called for root hub
[ 0.468648] hub 4-0:1.0: USB hub found
[ 0.468655] hub 4-0:1.0: 2 ports detected
[ 0.472850] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.475814] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.475818] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.475881] mousedev: PS/2 mouse device common for all mice
[ 0.475966] rtc_cmos 00:05: RTC can wake from S4
[ 0.476072] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.476098] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.476133] device-mapper: uevent: version 1.0.3
[ 0.476167] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[ 0.476172] Intel P-state driver initializing.
[ 0.476178] Intel pstate controlling: cpu 0
[ 0.476190] Intel pstate controlling: cpu 1
[ 0.476197] Intel pstate controlling: cpu 2
[ 0.476207] Intel pstate controlling: cpu 3
[ 0.476268] cpuidle: using governor ladder
[ 0.476332] cpuidle: using governor menu
[ 0.476339] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.476390] TCP: cubic registered
[ 0.476439] NET: Registered protocol family 10
[ 0.476548] NET: Registered protocol family 17
[ 0.476554] Key type dns_resolver registered
[ 0.476698] PM: Hibernation image not present or could not be loaded.
[ 0.476700] Loading module verification certificates
[ 0.477282] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 08b3cad365c40ca24b38dbd19e1684d04ddf243d'
[ 0.477291] registered taskstats version 1
[ 0.478683] Key type trusted registered
[ 0.479877] Key type encrypted registered
[ 0.481258] Magic number: 14:270:165
[ 0.481342] rtc_cmos 00:05: setting system clock to 2014-01-14 06:10:49 UTC (1389679849)
[ 0.481487] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.481488] EDD information not available.
[ 0.482328] Freeing unused kernel memory: 1380K (ffffffff81d0e000 - ffffffff81e67000)
[ 0.482329] Write protecting the kernel read-only data: 12288k
[ 0.483557] Freeing unused kernel memory: 828K (ffff880001731000 - ffff880001800000)
[ 0.484538] Freeing unused kernel memory: 704K (ffff880001b50000 - ffff880001c00000)
[ 0.498030] systemd-udevd[114]: starting version 204
[ 0.516087] pps_core: LinuxPPS API ver. 1 registered
[ 0.516091] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.517163] PTP clock support registered
[ 0.521107] ahci 0000:00:1f.2: version 3.0
[ 0.521251] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 0.521300] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.521303] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.521309] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.522291] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 0.522293] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 0.529219] scsi0 : ahci
[ 0.529303] scsi1 : ahci
[ 0.529377] scsi2 : ahci
[ 0.529461] scsi3 : ahci
[ 0.529533] ata1: SATA max UDMA/133 abar m2048@0xf7d26000 port 0xf7d26100 irq 45
[ 0.529537] ata2: SATA max UDMA/133 abar m2048@0xf7d26000 port 0xf7d26180 irq 45
[ 0.529538] ata3: DUMMY
[ 0.529539] ata4: DUMMY
[ 0.529684] e1000e 0000:00:19.0: setting latency timer to 64
[ 0.529746] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.529767] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 0.760963] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.792081] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 0.792084] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) e0:cb:4e:28:cb:a8
[ 0.792085] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 0.792119] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 0.849040] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.849069] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.860635] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 0.860640] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 0.860644] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 0.871042] ata2.00: ATA-8: MKNSSDCR60GB, 502ABBF0, max UDMA/133
[ 0.871047] ata2.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.880612] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 0.880617] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 0.880620] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 0.891047] ata2.00: configured for UDMA/133
[ 0.891310] scsi 1:0:0:0: Direct-Access ATA MKNSSDCR60GB 502A PQ: 0 ANSI: 5
[ 0.891528] sd 1:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 0.891535] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 0.891701] sd 1:0:0:0: [sda] Write Protect is off
[ 0.891706] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.891840] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.892803] sda: sda1 sda2
[ 0.892897] sda: p2 size 16384000 extends beyond EOD, enabling native capacity
[ 0.893348] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 0.893351] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.893509] hub 1-1:1.0: USB hub found
[ 0.893608] sda: sda1 sda2
[ 0.893621] hub 1-1:1.0: 4 ports detected
[ 0.893679] sda: p2 size 16384000 extends beyond EOD, truncated
[ 0.894277] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.005078] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.137509] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.137513] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.137754] hub 2-1:1.0: USB hub found
[ 1.137853] hub 2-1:1.0: 6 ports detected
[ 1.249214] usb 3-1: new full-speed USB device number 2 using xhci_hcd
[ 1.315077] usb 3-1: New USB device found, idVendor=147a, idProduct=e03e
[ 1.315081] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.315083] usb 3-1: Product: eHome Infrared Transceiver
[ 1.315085] usb 3-1: Manufacturer: Formosa21
[ 1.315087] usb 3-1: SerialNumber: 0000A590
[ 1.315254] usb 3-1: ep 0x83 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.320529] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.334135] usbcore: registered new interface driver usbhid
[ 1.334137] usbhid: USB HID core driver
[ 1.335780] hid-generic 0003:147A:E03E.0001: hiddev0,hidraw0: USB HID v1.00 Device [Formosa21 eHome Infrared Transceiver] on usb-0000:02:00.0-1/input1
[ 1.389328] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.393269] tsc: Refined TSC clocksource calibration: 3392.292 MHz
[ 1.484795] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c52f
[ 1.484800] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.484802] usb 1-1.1: Product: USB Receiver
[ 1.484804] usb 1-1.1: Manufacturer: Logitech
[ 1.487080] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input2
[ 1.487212] hid-generic 0003:046D:C52F.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input0
[ 1.489382] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input3
[ 1.489679] hid-generic 0003:046D:C52F.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input1
[ 1.561414] usb 1-1.2: new full-speed USB device number 4 using ehci-pci
[ 1.657115] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c52b
[ 1.657119] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.657121] usb 1-1.2: Product: USB Receiver
[ 1.657124] usb 1-1.2: Manufacturer: Logitech
[ 1.665312] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input2
[ 1.667850] input: Logitech Unifying Device. Wireless PID:2007 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/0003:046D:C52B.0006/input/input4
[ 1.667919] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2007] on usb-0000:00:1a.0-1.2:1
[ 2.393887] Switched to clocksource tsc
[ 5.931547] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 5.931551] EXT4-fs (sda1): write access will be enabled during recovery
[ 5.955484] EXT4-fs (sda1): recovery complete
[ 5.955933] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.041650] init: ureadahead main process (180) terminated with status 5
[ 6.096409] Adding 7673748k swap on /dev/sda2. Priority:-1 extents:1 across:7673748k SSFS
[ 6.119797] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
[ 6.172979] systemd-udevd[341]: starting version 204
[ 6.202881] lp: driver loaded but no devices found
[ 6.243270] mei_me 0000:00:16.0: setting latency timer to 64
[ 6.243314] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
[ 6.261566] [drm] Initialized drm 1.1.0 20060810
[ 6.277043] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
[ 6.277050] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.277054] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 6.277058] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_GPE.GPS0 2 (20130517/utaddress-251)
[ 6.277061] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.277063] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 6.277065] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_GPE.GPS0 2 (20130517/utaddress-251)
[ 6.277068] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.277070] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 6.277073] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_GPE.GPS0 2 (20130517/utaddress-251)
[ 6.277076] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.277077] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.289958] [drm] Memory usable by graphics device = 2048M
[ 6.289967] i915 0000:00:02.0: setting latency timer to 64
[ 6.318412] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[ 6.318424] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.318426] [drm] Driver supports precise vblank timestamp query.
[ 6.318482] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.326154] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x17
[ 6.351601] Bluetooth: Core ver 2.16
[ 6.351618] NET: Registered protocol family 31
[ 6.351620] Bluetooth: HCI device and connection manager initialized
[ 6.351628] Bluetooth: HCI socket layer initialized
[ 6.351631] Bluetooth: L2CAP socket layer initialized
[ 6.351636] Bluetooth: SCO socket layer initialized
[ 6.361063] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.361066] Bluetooth: BNEP filters: protocol multicast
[ 6.361090] Bluetooth: BNEP socket layer initialized
[ 6.361435] Bluetooth: RFCOMM TTY layer initialized
[ 6.361444] Bluetooth: RFCOMM socket layer initialized
[ 6.361445] Bluetooth: RFCOMM ver 1.11
[ 6.375541] Registered IR keymap rc-rc6-mce
[ 6.375629] input: Media Center Ed. eHome Infrared Remote Transceiver (147a:e03e) as /devices/pci0000:00/0000:00:1c.1/0000:02:00.0/usb3/3-1/3-1:1.0/rc/rc0/input5
[ 6.375702] rc0: Media Center Ed. eHome Infrared Remote Transceiver (147a:e03e) as /devices/pci0000:00/0000:00:1c.1/0000:02:00.0/usb3/3-1/3-1:1.0/rc/rc0
[ 6.379888] IR NEC protocol handler initialized
[ 6.381367] ppdev: user-space parallel port driver
[ 6.383109] IR RC5(x) protocol handler initialized
[ 6.390298] IR RC6 protocol handler initialized
[ 6.391627] IR JVC protocol handler initialized
[ 6.392418] IR SANYO protocol handler initialized
[ 6.393059] init: avahi-cups-reload main process (480) terminated with status 1
[ 6.394285] IR Sony protocol handler initialized
[ 6.394561] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input6
[ 6.394921] IR MCE Keyboard/mouse protocol handler initialized
[ 6.395034] lirc_dev: IR Remote Control driver registered, major 248
[ 6.396488] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
[ 6.396491] IR LIRC bridge handler initialized
[ 6.488271] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x17
[ 6.526779] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x17
[ 6.534357] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x17
[ 6.536859] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 6.548834] fbcon: inteldrmfb (fb0) is primary device
[ 6.583654] mceusb 3-1:1.0: Registered Formosa21 eHome Infrared Transceiver with mce emulator interface version 2
[ 6.583656] mceusb 3-1:1.0: 0 tx ports (0x0 cabled) and 1 rx sensors (0x1 active)
[ 6.583694] usbcore: registered new interface driver mceusb
[ 6.700283] type=1400 audit(1389679855.712:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=528 comm="apparmor_parser"
[ 6.700331] type=1400 audit(1389679855.712:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=528 comm="apparmor_parser"
[ 6.700359] type=1400 audit(1389679855.712:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=528 comm="apparmor_parser"
[ 6.804207] type=1400 audit(1389679855.816:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=555 comm="apparmor_parser"
[ 6.804262] type=1400 audit(1389679855.816:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=555 comm="apparmor_parser"
[ 6.804297] type=1400 audit(1389679855.816:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=555 comm="apparmor_parser"
[ 6.810097] type=1400 audit(1389679855.820:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=597 comm="apparmor_parser"
[ 6.915241] type=1400 audit(1389679855.924:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=598 comm="apparmor_parser"
[ 6.926888] type=1400 audit(1389679855.936:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=535 comm="apparmor_parser"
[ 6.926988] type=1400 audit(1389679855.936:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=535 comm="apparmor_parser"
[ 7.816517] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 8.432583] Console: switching to colour frame buffer device 240x67
[ 8.435381] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 8.435382] i915 0000:00:02.0: registered panic notifier
[ 8.441892] acpi device:4b: registered as cooling_device10
[ 8.442052] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 8.442770] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 8.444366] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.444555] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 8.459070] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 8.459074] speaker_outs=1 (0x1a/0x0/0x0/0x0/0x0)
[ 8.459075] hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.459076] mono: mono_out=0x0
[ 8.459077] dig-out=0x1e/0x0
[ 8.459078] inputs:
[ 8.459080] Mic=0x18
[ 8.459082] Internal Mic=0x12
[ 8.482151] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 8.482313] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.482467] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.482988] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.483727] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 8.539453] init: failsafe main process (611) killed by TERM signal
[ 8.836835] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 8.940793] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 8.940902] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 12.287200] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 12.287237] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 12.938414] audit_printk_skb: 54 callbacks suppressed
[ 12.938418] type=1400 audit(1389679861.944:30): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=900 comm="apparmor_parser"
[ 12.938806] type=1400 audit(1389679861.948:31): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=900 comm="apparmor_parser"
[ 12.939215] type=1400 audit(1389679861.948:32): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=900 comm="apparmor_parser"
[ 12.939414] type=1400 audit(1389679861.948:33): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=900 comm="apparmor_parser"
[ 12.939648] type=1400 audit(1389679861.948:34): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=900 comm="apparmor_parser"
[ 12.939804] type=1400 audit(1389679861.948:35): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=900 comm="apparmor_parser"
[-- Attachment #3: kernel_3.12.1.log --]
[-- Type: text/x-log, Size: 55428 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.1-031201-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201311201654 SMP Wed Nov 20 21:54:49 UTC 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.12.1-031201-generic root=UUID=7f1378fa-0837-48fa-aa07-74ee97a6170a ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d5c0ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d5c10000-0x00000000d630efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d630f000-0x00000000d631efff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000d631f000-0x00000000d6429fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d642a000-0x00000000d670cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d670d000-0x00000000d670dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d670e000-0x00000000d6750fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d6751000-0x00000000d6ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d7800000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: /DH61AG, BIOS AGH6110H.86A.0106.2013.0509.1441 05/09/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x11f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 0D8000000 mask FF8000000 uncachable
[ 0.000000] 4 base 0D7800000 mask FFF800000 uncachable
[ 0.000000] 5 base 11F800000 mask FFF800000 uncachable
[ 0.000000] 6 base 11F600000 mask FFFE00000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 3, base: 3456MB, range: 128MB, type UC
[ 0.000000] reg 4, base: 3448MB, range: 8MB, type UC
[ 0.000000] reg 5, base: 4600MB, range: 8MB, type UC
[ 0.000000] reg 6, base: 4598MB, range: 2MB, type UC
[ 0.000000] total RAM covered: 3950M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 8 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3328MB, range: 128MB, type WB
[ 0.000000] reg 4, base: 3448MB, range: 8MB, type UC
[ 0.000000] reg 5, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 6, base: 4598MB, range: 2MB, type UC
[ 0.000000] reg 7, base: 4600MB, range: 8MB, type UC
[ 0.000000] e820: update [mem 0xd7800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xd7000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd6e0-0x000fd6ef] mapped at [ffff8800000fd6e0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE
[ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11f400000-0x11f5fffff]
[ 0.000000] [mem 0x11f400000-0x11f5fffff] page 2M
[ 0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11f3fffff]
[ 0.000000] [mem 0x11c000000-0x11f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[ 0.000000] [mem 0x100000000-0x11bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x01fd7000, 0x01fd7fff] PGTABLE
[ 0.000000] BRK [0x01fd8000, 0x01fd8fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0xd5c0ffff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0xd5bfffff] page 2M
[ 0.000000] [mem 0xd5c00000-0xd5c0ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd670d000-0xd670dfff]
[ 0.000000] [mem 0xd670d000-0xd670dfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd6751000-0xd6ffffff]
[ 0.000000] [mem 0xd6751000-0xd67fffff] page 4k
[ 0.000000] [mem 0xd6800000-0xd6ffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x35d88000-0x36ebbfff]
[ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 INTEL)
[ 0.000000] ACPI: XSDT 00000000d6313070 00064 (v01 INTEL DH61AG 0000006A AMI 00010013)
[ 0.000000] ACPI: FACP 00000000d631c828 0010C (v05 INTEL DH61AG 0000006A AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000d6313168 096BF (v02 INTEL DH61AG 0000006A INTL 20051117)
[ 0.000000] ACPI: FACS 00000000d6428080 00040
[ 0.000000] ACPI: APIC 00000000d631c938 00072 (v03 INTEL DH61AG 0000006A AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000d631c9b0 00044 (v01 INTEL DH61AG 0000006A AMI 00010013)
[ 0.000000] ACPI: MCFG 00000000d631c9f8 0003C (v01 INTEL DH61AG 0000006A MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000d631ca38 00038 (v01 INTEL DH61AG 0000006A AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000d631ca70 0036D (v01 INTEL DH61AG 0000006A INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000d631cde0 009AA (v01 INTEL DH61AG 0000006A INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000d631d790 00A92 (v01 INTEL DH61AG 0000006A INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11f5fffff]
[ 0.000000] NODE_DATA [mem 0x11f5f7000-0x11f5fbfff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ae00000-ffff88011ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x11f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xd5c0ffff]
[ 0.000000] node 0: [mem 0xd670d000-0xd670dfff]
[ 0.000000] node 0: [mem 0xd6751000-0xd6ffffff]
[ 0.000000] node 0: [mem 0x100000000-0x11f5fffff]
[ 0.000000] On node 0 totalpages: 1005659
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13643 pages used for memmap
[ 0.000000] DMA32 zone: 873151 pages, LIFO batch:31
[ 0.000000] Normal zone: 2008 pages used for memmap
[ 0.000000] Normal zone: 128512 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd5c10000-0xd630efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd630f000-0xd631efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd631f000-0xd6429fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd642a000-0xd670cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd670e000-0xd6750fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd7000000-0xd77fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd7800000-0xdf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011f200000 s86592 r8192 d24000 u524288
[ 0.000000] pcpu-alloc: s86592 r8192 d24000 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 989923
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12.1-031201-generic root=UUID=7f1378fa-0837-48fa-aa07-74ee97a6170a ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3858416K/4022636K available (7539K kernel code, 1118K rwdata, 3516K rodata, 1340K init, 1416K bss, 164220K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-255.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16252928 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 3392.301 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.60 BogoMIPS (lpj=13569204)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000019] Security Framework initialized
[ 0.000033] AppArmor: AppArmor initialized
[ 0.000033] Yama: becoming mindful.
[ 0.000254] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001199] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001619] Mount-cache hash table entries: 256
[ 0.001755] Initializing cgroup subsys memory
[ 0.001763] Initializing cgroup subsys devices
[ 0.001765] Initializing cgroup subsys freezer
[ 0.001766] Initializing cgroup subsys blkio
[ 0.001767] Initializing cgroup subsys perf_event
[ 0.001769] Initializing cgroup subsys hugetlb
[ 0.001786] CPU: Physical Processor ID: 0
[ 0.001786] CPU: Processor Core ID: 0
[ 0.001790] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.001790] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.001793] mce: CPU supports 7 MCE banks
[ 0.001802] CPU0: Thermal monitoring enabled (TM1)
[ 0.001809] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.001809] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.001809] tlb_flushall_shift: 1
[ 0.001903] Freeing SMP alternatives memory: 28K (ffffffff81e68000 - ffffffff81e6f000)
[ 0.002755] ACPI: Core revision 20130725
[ 0.006175] ACPI: All ACPI Tables successfully acquired
[ 0.016819] ftrace: allocating 31049 entries in 122 pages
[ 0.027790] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.067492] smpboot: CPU0: Intel(R) Core(TM) i3-3240 CPU @ 3.40GHz (fam: 06, model: 3a, stepping: 09)
[ 0.067499] TSC deadline timer enabled
[ 0.069039] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.069045] ... version: 3
[ 0.069046] ... bit width: 48
[ 0.069046] ... generic registers: 4
[ 0.069047] ... value mask: 0000ffffffffffff
[ 0.069048] ... max period: 0000ffffffffffff
[ 0.069048] ... fixed-purpose events: 3
[ 0.069049] ... event mask: 000000070000000f
[ 0.083140] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.070059] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK
[ 0.109487] Brought up 4 CPUs
[ 0.109490] smpboot: Total of 4 processors activated (27138.40 BogoMIPS)
[ 0.112180] devtmpfs: initialized
[ 0.115376] EVM: security.selinux
[ 0.115377] EVM: security.SMACK64
[ 0.115377] EVM: security.capability
[ 0.115409] PM: Registering ACPI NVS region [mem 0xd631f000-0xd6429fff] (1093632 bytes)
[ 0.115420] PM: Registering ACPI NVS region [mem 0xd670e000-0xd6750fff] (274432 bytes)
[ 0.115942] pinctrl core: initialized pinctrl subsystem
[ 0.115981] regulator-dummy: no parameters
[ 0.116009] RTC time: 17:47:24, date: 01/14/14
[ 0.116031] NET: Registered protocol family 16
[ 0.116096] cpuidle: using governor ladder
[ 0.116097] cpuidle: using governor menu
[ 0.116120] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.116121] ACPI: bus type PCI registered
[ 0.116122] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.116155] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.116157] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.120807] PCI: Using configuration type 1 for base access
[ 0.121374] bio: create slab <bio-0> at 0
[ 0.121484] ACPI: Added _OSI(Module Device)
[ 0.121485] ACPI: Added _OSI(Processor Device)
[ 0.121486] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.121487] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.122652] ACPI: EC: Look up EC in DSDT
[ 0.123818] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.129798] ACPI: SSDT 00000000d62bb018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.130079] ACPI: Dynamic OEM Table Load:
[ 0.130080] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.133685] ACPI: SSDT 00000000d62bca98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.133983] ACPI: Dynamic OEM Table Load:
[ 0.133984] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.137603] ACPI: SSDT 00000000d62bdc18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.137879] ACPI: Dynamic OEM Table Load:
[ 0.137880] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.141902] ACPI: Interpreter enabled
[ 0.141906] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[ 0.141909] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.141919] ACPI: (supports S0 S3 S4 S5)
[ 0.141919] ACPI: Using IOAPIC for interrupt routing
[ 0.141937] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.142046] ACPI: No dock devices found.
[ 0.146621] ACPI: Power Resource [FN00] (off)
[ 0.146673] ACPI: Power Resource [FN01] (off)
[ 0.146723] ACPI: Power Resource [FN02] (off)
[ 0.146774] ACPI: Power Resource [FN03] (off)
[ 0.146824] ACPI: Power Resource [FN04] (off)
[ 0.147257] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.147406] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.147537] acpi PNP0A08:00: ACPI _OSC control (0x18) granted
[ 0.147866] ACPI: \_SB_.PCI0.TPMX: can't evaluate _ADR (0x5)
[ 0.147990] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
[ 0.147991] ACPI: \_SB_.PCI0.DOCK: can't evaluate _ADR (0x5)
[ 0.147992] PCI host bridge to bus 0000:00
[ 0.147994] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.147995] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.147996] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.147997] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.147999] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.148000] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.148001] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.148002] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.148003] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.148004] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.148006] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 0.148011] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[ 0.148079] pci 0000:00:02.0: [8086:0152] type 00 class 0x030000
[ 0.148087] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.148092] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.148095] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.148178] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.148200] pci 0000:00:16.0: reg 0x10: [mem 0xf7d2b000-0xf7d2b00f 64bit]
[ 0.148272] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.148340] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
[ 0.148357] pci 0000:00:19.0: reg 0x10: [mem 0xf7d00000-0xf7d1ffff]
[ 0.148365] pci 0000:00:19.0: reg 0x14: [mem 0xf7d29000-0xf7d29fff]
[ 0.148373] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 0.148437] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.148501] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.148521] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d28000-0xf7d283ff]
[ 0.148607] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.148657] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.148683] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.148697] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d20000-0xf7d23fff 64bit]
[ 0.148761] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.148802] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.148826] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.148901] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.148944] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.148966] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.149041] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.149084] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.149115] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.149135] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d27000-0xf7d273ff]
[ 0.149220] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.149269] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.149296] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[ 0.149451] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.149468] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.149476] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.149483] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.149491] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.149498] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.149506] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d26000-0xf7d267ff]
[ 0.149549] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.149605] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.149620] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d25000-0xf7d250ff 64bit]
[ 0.149639] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.149760] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.149856] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.149896] pci 0000:02:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
[ 0.150076] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.150132] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.160442] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.160453] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.160494] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.160940] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.160978] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.161017] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.161053] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.161089] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.161126] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.161163] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.161198] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.161382] ACPI: Enabled 7 GPEs in block 00 to 3F
[ 0.161386] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.161427] Found 1 acpi root devices
[ 0.161496] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.161498] vgaarb: loaded
[ 0.161499] vgaarb: bridge control possible 0000:00:02.0
[ 0.161603] SCSI subsystem initialized
[ 0.161642] libata version 3.00 loaded.
[ 0.161664] ACPI: bus type USB registered
[ 0.161676] usbcore: registered new interface driver usbfs
[ 0.161682] usbcore: registered new interface driver hub
[ 0.161701] usbcore: registered new device driver usb
[ 0.161769] PCI: Using ACPI for IRQ routing
[ 0.163226] PCI: pci_cache_line_size set to 64 bytes
[ 0.163261] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.163262] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.163263] e820: reserve RAM buffer [mem 0xd5c10000-0xd7ffffff]
[ 0.163265] e820: reserve RAM buffer [mem 0xd670e000-0xd7ffffff]
[ 0.163266] e820: reserve RAM buffer [mem 0xd7000000-0xd7ffffff]
[ 0.163267] e820: reserve RAM buffer [mem 0x11f600000-0x11fffffff]
[ 0.163329] NetLabel: Initializing
[ 0.163330] NetLabel: domain hash size = 128
[ 0.163331] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.163337] NetLabel: unlabeled traffic allowed by default
[ 0.163380] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.163384] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.165413] Switched to clocksource hpet
[ 0.168766] AppArmor: AppArmor Filesystem Enabled
[ 0.168788] pnp: PnP ACPI init
[ 0.168797] ACPI: bus type PNP registered
[ 0.168879] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.168882] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.168892] pnp 00:01: [dma 4]
[ 0.168901] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.168913] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.168979] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.169003] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.169006] system 00:04: [io 0x1000-0x100f] has been reserved
[ 0.169007] system 00:04: [io 0xffff] has been reserved
[ 0.169008] system 00:04: [io 0xffff] has been reserved
[ 0.169010] system 00:04: [io 0x0400-0x0453] could not be reserved
[ 0.169011] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.169012] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.169013] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.169015] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.169037] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.169065] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.169066] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.169153] system 00:07: [io 0x0a00-0x0a0f] has been reserved
[ 0.169155] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.169184] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.169215] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.169343] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.169345] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.169360] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.169535] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.169537] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.169538] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.169540] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.169541] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.169542] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.169544] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.169545] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.169546] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[ 0.169548] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.169549] system 00:0c: [mem 0xdfa00000-0xdfa00fff] has been reserved
[ 0.169551] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.169655] system 00:0d: [mem 0x20000000-0x201fffff] has been reserved
[ 0.169656] system 00:0d: [mem 0x40004000-0x40004fff] has been reserved
[ 0.169658] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.169671] pnp: PnP ACPI: found 14 devices
[ 0.169672] ACPI: bus type PNP unregistered
[ 0.175672] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.175684] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.175688] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.175696] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.175698] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.175699] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.175700] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.175701] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.175703] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.175704] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.175705] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.175706] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.175707] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
[ 0.175709] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.175730] NET: Registered protocol family 2
[ 0.175842] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.175968] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.176060] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.176075] TCP: reno registered
[ 0.176081] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.176096] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.176139] NET: Registered protocol family 1
[ 0.176147] pci 0000:00:02.0: Boot video device
[ 0.213656] PCI: CLS 64 bytes, default 64
[ 0.213689] Trying to unpack rootfs image as initramfs...
[ 0.413428] Freeing initrd memory: 17616K (ffff880035d88000 - ffff880036ebc000)
[ 0.413432] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.413434] software IO TLB [mem 0xd1c10000-0xd5c10000] (64MB) mapped at [ffff8800d1c10000-ffff8800d5c0ffff]
[ 0.413637] Scanning for low memory corruption every 60 seconds
[ 0.413852] Initialise module verification
[ 0.413883] audit: initializing netlink socket (disabled)
[ 0.413893] type=2000 audit(1389721644.404:1): initialized
[ 0.433969] bounce pool size: 64 pages
[ 0.433979] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.434686] zbud: loaded
[ 0.434784] VFS: Disk quotas dquot_6.5.2
[ 0.434807] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.435091] fuse init (API version 7.22)
[ 0.435137] msgmni has been set to 7570
[ 0.435531] Key type asymmetric registered
[ 0.435533] Asymmetric key parser 'x509' registered
[ 0.435550] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.435580] io scheduler noop registered
[ 0.435581] io scheduler deadline registered (default)
[ 0.435596] io scheduler cfq registered
[ 0.435815] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.435824] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.450862] Console: switching to colour frame buffer device 80x30
[ 0.465722] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[ 0.465727] intel_idle: MWAIT substates: 0x1120
[ 0.465728] intel_idle: v0.4 model 0x3A
[ 0.465729] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.465839] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.465843] ACPI: Power Button [PWRB]
[ 0.465864] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.465866] ACPI: Power Button [PWRF]
[ 0.465907] ACPI: Fan [FAN0] (off)
[ 0.465925] ACPI: Fan [FAN1] (off)
[ 0.465942] ACPI: Fan [FAN2] (off)
[ 0.465956] ACPI: Fan [FAN3] (off)
[ 0.465974] ACPI: Fan [FAN4] (off)
[ 0.466009] ACPI: Requesting acpi_cpufreq
[ 0.473792] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.473794] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.473927] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.473928] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.473947] GHES: HEST is not enabled!
[ 0.474002] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.475161] Linux agpgart interface v0.103
[ 0.475958] brd: module loaded
[ 0.476328] loop: module loaded
[ 0.476529] libphy: Fixed MDIO Bus: probed
[ 0.476577] tun: Universal TUN/TAP device driver, 1.6
[ 0.476578] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.476607] PPP generic driver version 2.4.2
[ 0.476636] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.476638] ehci-pci: EHCI PCI platform driver
[ 0.476721] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 0.476727] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.476731] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.476743] ehci-pci 0000:00:1a.0: debug port 2
[ 0.480631] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.480645] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d28000
[ 0.489574] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.489607] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.489608] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.489609] usb usb1: Product: EHCI Host Controller
[ 0.489611] usb usb1: Manufacturer: Linux 3.12.1-031201-generic ehci_hcd
[ 0.489612] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.489681] hub 1-0:1.0: USB hub found
[ 0.489686] hub 1-0:1.0: 2 ports detected
[ 0.489828] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 0.489832] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.489835] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.489846] ehci-pci 0000:00:1d.0: debug port 2
[ 0.493760] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.493774] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d27000
[ 0.505605] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.505663] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.505665] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.505666] usb usb2: Product: EHCI Host Controller
[ 0.505667] usb usb2: Manufacturer: Linux 3.12.1-031201-generic ehci_hcd
[ 0.505668] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.505794] hub 2-0:1.0: USB hub found
[ 0.505802] hub 2-0:1.0: 2 ports detected
[ 0.505880] ehci-platform: EHCI generic platform driver
[ 0.505885] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.505886] ohci-platform: OHCI generic platform driver
[ 0.505890] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.505940] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.505945] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[ 0.506118] xhci_hcd 0000:02:00.0: irq 40 for MSI/MSI-X
[ 0.506121] xhci_hcd 0000:02:00.0: irq 41 for MSI/MSI-X
[ 0.506124] xhci_hcd 0000:02:00.0: irq 42 for MSI/MSI-X
[ 0.506128] xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X
[ 0.506131] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
[ 0.506244] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.506245] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.506246] usb usb3: Product: xHCI Host Controller
[ 0.506247] usb usb3: Manufacturer: Linux 3.12.1-031201-generic xhci_hcd
[ 0.506248] usb usb3: SerialNumber: 0000:02:00.0
[ 0.506363] hub 3-0:1.0: USB hub found
[ 0.506374] hub 3-0:1.0: 2 ports detected
[ 0.506429] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.506431] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[ 0.509548] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.509549] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.509550] usb usb4: Product: xHCI Host Controller
[ 0.509551] usb usb4: Manufacturer: Linux 3.12.1-031201-generic xhci_hcd
[ 0.509552] usb usb4: SerialNumber: 0000:02:00.0
[ 0.509640] hub 4-0:1.0: USB hub found
[ 0.509651] hub 4-0:1.0: 2 ports detected
[ 0.517680] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.520591] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.520598] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.520741] mousedev: PS/2 mouse device common for all mice
[ 0.520988] rtc_cmos 00:05: RTC can wake from S4
[ 0.521138] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.521166] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.521208] device-mapper: uevent: version 1.0.3
[ 0.521299] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
[ 0.521303] Intel P-state driver initializing.
[ 0.521311] Intel pstate controlling: cpu 0
[ 0.521324] Intel pstate controlling: cpu 1
[ 0.521331] Intel pstate controlling: cpu 2
[ 0.521338] Intel pstate controlling: cpu 3
[ 0.521352] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.521404] TCP: cubic registered
[ 0.521451] NET: Registered protocol family 10
[ 0.521566] NET: Registered protocol family 17
[ 0.521572] Key type dns_resolver registered
[ 0.521832] Loading module verification certificates
[ 0.522401] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: b1d410877cfeae5f9ffc8f10def18d7693a99d6c'
[ 0.522408] registered taskstats version 1
[ 0.524197] Key type trusted registered
[ 0.525602] Key type encrypted registered
[ 0.526970] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.527198] Magic number: 14:60:795
[ 0.527282] rtc_cmos 00:05: setting system clock to 2014-01-14 17:47:24 UTC (1389721644)
[ 0.527324] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.527325] EDD information not available.
[ 0.527360] PM: Hibernation image not present or could not be loaded.
[ 0.528119] Freeing unused kernel memory: 1340K (ffffffff81d19000 - ffffffff81e68000)
[ 0.528120] Write protecting the kernel read-only data: 12288k
[ 0.529146] Freeing unused kernel memory: 640K (ffff880001760000 - ffff880001800000)
[ 0.530004] Freeing unused kernel memory: 580K (ffff880001b6f000 - ffff880001c00000)
[ 0.540342] systemd-udevd[115]: starting version 204
[ 0.559325] pps_core: LinuxPPS API ver. 1 registered
[ 0.559328] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.560144] PTP clock support registered
[ 0.563605] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 0.563607] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 0.563745] e1000e 0000:00:19.0: setting latency timer to 64
[ 0.563807] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.563826] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 0.801804] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.828675] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 0.828678] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) e0:cb:4e:28:cb:a8
[ 0.828679] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 0.828713] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 0.828733] ahci 0000:00:1f.2: version 3.0
[ 0.828887] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[ 0.828932] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.828934] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.828938] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.834018] scsi0 : ahci
[ 0.834088] scsi1 : ahci
[ 0.834152] scsi2 : ahci
[ 0.834209] scsi3 : ahci
[ 0.834245] ata1: SATA max UDMA/133 abar m2048@0xf7d26000 port 0xf7d26100 irq 46
[ 0.834248] ata2: SATA max UDMA/133 abar m2048@0xf7d26000 port 0xf7d26180 irq 46
[ 0.834248] ata3: DUMMY
[ 0.834249] ata4: DUMMY
[ 0.934205] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 0.934209] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.934559] hub 1-1:1.0: USB hub found
[ 0.934646] hub 1-1:1.0: 4 ports detected
[ 1.045902] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.153923] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.157931] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.169400] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.169405] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.169408] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.178316] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.178320] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.178705] hub 2-1:1.0: USB hub found
[ 1.178765] hub 2-1:1.0: 6 ports detected
[ 1.179806] ata2.00: ATA-8: MKNSSDCR60GB, 502ABBF0, max UDMA/133
[ 1.179811] ata2.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.189330] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.189335] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.189348] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.199842] ata2.00: configured for UDMA/133
[ 1.200082] scsi 1:0:0:0: Direct-Access ATA MKNSSDCR60GB 502A PQ: 0 ANSI: 5
[ 1.200212] sd 1:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 1.200215] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.200349] sd 1:0:0:0: [sda] Write Protect is off
[ 1.200352] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.200489] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.201512] sda: sda1 sda2
[ 1.201617] sda: p2 size 16384000 extends beyond EOD, enabling native capacity
[ 1.202398] sda: sda1 sda2
[ 1.202467] sda: p2 size 16384000 extends beyond EOD, truncated
[ 1.202759] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.290002] usb 3-1: new full-speed USB device number 2 using xhci_hcd
[ 1.356016] usb 3-1: New USB device found, idVendor=147a, idProduct=e03e
[ 1.356019] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.356021] usb 3-1: Product: eHome Infrared Transceiver
[ 1.356022] usb 3-1: Manufacturer: Formosa21
[ 1.356024] usb 3-1: SerialNumber: 0000A590
[ 1.356217] usb 3-1: ep 0x83 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.361216] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.375124] usbcore: registered new interface driver usbhid
[ 1.375127] usbhid: USB HID core driver
[ 1.376673] hid-generic 0003:147A:E03E.0001: hiddev0,hidraw0: USB HID v1.00 Device [Formosa21 eHome Infrared Transceiver] on usb-0000:02:00.0-1/input1
[ 1.410036] tsc: Refined TSC clocksource calibration: 3392.294 MHz
[ 1.430189] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.526147] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c52f
[ 1.526151] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.526153] usb 1-1.1: Product: USB Receiver
[ 1.526155] usb 1-1.1: Manufacturer: Logitech
[ 1.528410] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input4
[ 1.528719] hid-generic 0003:046D:C52F.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input0
[ 1.530780] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input5
[ 1.531057] hid-generic 0003:046D:C52F.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input1
[ 1.602247] usb 1-1.2: new full-speed USB device number 4 using ehci-pci
[ 1.697668] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c52b
[ 1.697672] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.697675] usb 1-1.2: Product: USB Receiver
[ 1.697677] usb 1-1.2: Manufacturer: Logitech
[ 1.705994] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input2
[ 1.708938] input: Logitech Unifying Device. Wireless PID:2007 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/0003:046D:C52B.0006/input/input6
[ 1.709039] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2007] on usb-0000:00:1a.0-1.2:1
[ 2.410644] Switched to clocksource tsc
[ 6.242027] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 6.242030] EXT4-fs (sda1): write access will be enabled during recovery
[ 6.262227] EXT4-fs (sda1): recovery complete
[ 6.262671] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.355795] init: ureadahead main process (181) terminated with status 5
[ 6.415654] Adding 7673748k swap on /dev/sda2. Priority:-1 extents:1 across:7673748k SSFS
[ 6.472965] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
[ 6.481342] systemd-udevd[299]: starting version 204
[ 6.510952] lp: driver loaded but no devices found
[ 6.555012] mei_me 0000:00:16.0: setting latency timer to 64
[ 6.555052] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
[ 6.566608] [drm] Initialized drm 1.1.0 20060810
[ 6.594604] [drm] Memory usable by graphics device = 2048M
[ 6.594609] checking generic (e0000000 12c000) vs hw (e0000000 10000000)
[ 6.594611] fb: conflicting fb hw usage inteldrmfb vs simple - removing generic driver
[ 6.594629] Console: switching to colour dummy device 80x25
[ 6.596698] i915 0000:00:02.0: setting latency timer to 64
[ 6.620657] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x17
[ 6.627638] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[ 6.627649] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.627651] [drm] Driver supports precise vblank timestamp query.
[ 6.630213] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.656427] Registered IR keymap rc-rc6-mce
[ 6.656668] input: Media Center Ed. eHome Infrared Remote Transceiver (147a:e03e) as /devices/pci0000:00/0000:00:1c.1/0000:02:00.0/usb3/3-1/3-1:1.0/rc/rc0/input8
[ 6.656721] rc0: Media Center Ed. eHome Infrared Remote Transceiver (147a:e03e) as /devices/pci0000:00/0000:00:1c.1/0000:02:00.0/usb3/3-1/3-1:1.0/rc/rc0
[ 6.660878] IR NEC protocol handler initialized
[ 6.663737] IR RC5(x) protocol handler initialized
[ 6.665722] IR RC6 protocol handler initialized
[ 6.667118] IR JVC protocol handler initialized
[ 6.667726] IR Sony protocol handler initialized
[ 6.671745] IR SANYO protocol handler initialized
[ 6.675147] IR MCE Keyboard/mouse protocol handler initialized
[ 6.675589] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input9
[ 6.677033] lirc_dev: IR Remote Control driver registered, major 248
[ 6.678365] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
[ 6.678368] IR LIRC bridge handler initialized
[ 6.715309] Bluetooth: Core ver 2.16
[ 6.715329] NET: Registered protocol family 31
[ 6.715331] Bluetooth: HCI device and connection manager initialized
[ 6.715339] Bluetooth: HCI socket layer initialized
[ 6.715341] Bluetooth: L2CAP socket layer initialized
[ 6.715347] Bluetooth: SCO socket layer initialized
[ 6.728599] Bluetooth: RFCOMM TTY layer initialized
[ 6.728611] Bluetooth: RFCOMM socket layer initialized
[ 6.728613] Bluetooth: RFCOMM ver 1.11
[ 6.741028] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.741032] Bluetooth: BNEP filters: protocol multicast
[ 6.741041] Bluetooth: BNEP socket layer initialized
[ 6.759591] ppdev: user-space parallel port driver
[ 6.765988] init: avahi-cups-reload main process (523) terminated with status 1
[ 6.812689] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x17
[ 6.822132] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x17
[ 6.823038] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x17
[ 6.823995] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 6.832515] mceusb 3-1:1.0: Registered Formosa21 eHome Infrared Transceiver with mce emulator interface version 2
[ 6.832518] mceusb 3-1:1.0: 0 tx ports (0x0 cabled) and 1 rx sensors (0x1 active)
[ 6.832564] usbcore: registered new interface driver mceusb
[ 6.973606] type=1400 audit(1389721650.941:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=594 comm="apparmor_parser"
[ 6.973612] type=1400 audit(1389721650.941:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=594 comm="apparmor_parser"
[ 6.973616] type=1400 audit(1389721650.941:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=594 comm="apparmor_parser"
[ 6.974049] type=1400 audit(1389721650.941:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=594 comm="apparmor_parser"
[ 6.974054] type=1400 audit(1389721650.941:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=594 comm="apparmor_parser"
[ 6.974280] type=1400 audit(1389721650.941:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=594 comm="apparmor_parser"
[ 6.978976] type=1400 audit(1389721650.945:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=596 comm="apparmor_parser"
[ 7.068209] type=1400 audit(1389721651.033:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=591 comm="apparmor_parser"
[ 7.068216] type=1400 audit(1389721651.033:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=591 comm="apparmor_parser"
[ 7.069006] type=1400 audit(1389721651.037:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=591 comm="apparmor_parser"
[ 7.121535] init: failsafe main process (610) killed by TERM signal
[ 7.183104] fbcon: inteldrmfb (fb0) is primary device
[ 7.388588] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 7.488822] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 7.488904] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 7.829284] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 9.117654] Console: switching to colour frame buffer device 240x67
[ 9.217903] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 9.217904] i915 0000:00:02.0: registered panic notifier
[ 9.226308] acpi device:4b: registered as cooling_device10
[ 9.226403] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 9.226440] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 9.226502] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 9.226576] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
[ 9.226583] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.226589] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[ 9.226592] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_GPE.GPS0 2 (20130725/utaddress-251)
[ 9.226595] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.226597] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[ 9.226600] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_GPE.GPS0 2 (20130725/utaddress-251)
[ 9.226602] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.226603] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[ 9.226606] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_GPE.GPS0 2 (20130725/utaddress-251)
[ 9.226609] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.226610] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 9.226934] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 9.239866] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 9.239869] speaker_outs=1 (0x1a/0x0/0x0/0x0/0x0)
[ 9.239870] hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.239870] mono: mono_out=0x0
[ 9.239871] dig-out=0x1e/0x0
[ 9.239872] inputs:
[ 9.239873] Mic=0x18
[ 9.239874] Internal Mic=0x12
[ 9.257716] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 9.257780] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 9.257830] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 9.257882] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 9.257925] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 10.843310] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 10.843347] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[-- Attachment #4: kernel_3.12.7.log --]
[-- Type: text/x-log, Size: 56219 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.7-031207-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201401091657 SMP Thu Jan 9 21:59:37 UTC 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.12.7-031207-generic root=UUID=7f1378fa-0837-48fa-aa07-74ee97a6170a ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d5c0ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d5c10000-0x00000000d630efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d630f000-0x00000000d631efff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000d631f000-0x00000000d6429fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d642a000-0x00000000d670cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d670d000-0x00000000d670dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d670e000-0x00000000d6750fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d6751000-0x00000000d6ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d7800000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: /DH61AG, BIOS AGH6110H.86A.0106.2013.0509.1441 05/09/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x11f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 0D8000000 mask FF8000000 uncachable
[ 0.000000] 4 base 0D7800000 mask FFF800000 uncachable
[ 0.000000] 5 base 11F800000 mask FFF800000 uncachable
[ 0.000000] 6 base 11F600000 mask FFFE00000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 3, base: 3456MB, range: 128MB, type UC
[ 0.000000] reg 4, base: 3448MB, range: 8MB, type UC
[ 0.000000] reg 5, base: 4600MB, range: 8MB, type UC
[ 0.000000] reg 6, base: 4598MB, range: 2MB, type UC
[ 0.000000] total RAM covered: 3950M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 8 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3328MB, range: 128MB, type WB
[ 0.000000] reg 4, base: 3448MB, range: 8MB, type UC
[ 0.000000] reg 5, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 6, base: 4598MB, range: 2MB, type UC
[ 0.000000] reg 7, base: 4600MB, range: 8MB, type UC
[ 0.000000] e820: update [mem 0xd7800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xd7000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd6e0-0x000fd6ef] mapped at [ffff8800000fd6e0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE
[ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11f400000-0x11f5fffff]
[ 0.000000] [mem 0x11f400000-0x11f5fffff] page 2M
[ 0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11f3fffff]
[ 0.000000] [mem 0x11c000000-0x11f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[ 0.000000] [mem 0x100000000-0x11bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x01fd7000, 0x01fd7fff] PGTABLE
[ 0.000000] BRK [0x01fd8000, 0x01fd8fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0xd5c0ffff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0xd5bfffff] page 2M
[ 0.000000] [mem 0xd5c00000-0xd5c0ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd670d000-0xd670dfff]
[ 0.000000] [mem 0xd670d000-0xd670dfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd6751000-0xd6ffffff]
[ 0.000000] [mem 0xd6751000-0xd67fffff] page 4k
[ 0.000000] [mem 0xd6800000-0xd6ffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x35da8000-0x36ecbfff]
[ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 INTEL)
[ 0.000000] ACPI: XSDT 00000000d6313070 00064 (v01 INTEL DH61AG 0000006A AMI 00010013)
[ 0.000000] ACPI: FACP 00000000d631c828 0010C (v05 INTEL DH61AG 0000006A AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000d6313168 096BF (v02 INTEL DH61AG 0000006A INTL 20051117)
[ 0.000000] ACPI: FACS 00000000d6428080 00040
[ 0.000000] ACPI: APIC 00000000d631c938 00072 (v03 INTEL DH61AG 0000006A AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000d631c9b0 00044 (v01 INTEL DH61AG 0000006A AMI 00010013)
[ 0.000000] ACPI: MCFG 00000000d631c9f8 0003C (v01 INTEL DH61AG 0000006A MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000d631ca38 00038 (v01 INTEL DH61AG 0000006A AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000d631ca70 0036D (v01 INTEL DH61AG 0000006A INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000d631cde0 009AA (v01 INTEL DH61AG 0000006A INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000d631d790 00A92 (v01 INTEL DH61AG 0000006A INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11f5fffff]
[ 0.000000] NODE_DATA [mem 0x11f5f7000-0x11f5fbfff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ae00000-ffff88011ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x11f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xd5c0ffff]
[ 0.000000] node 0: [mem 0xd670d000-0xd670dfff]
[ 0.000000] node 0: [mem 0xd6751000-0xd6ffffff]
[ 0.000000] node 0: [mem 0x100000000-0x11f5fffff]
[ 0.000000] On node 0 totalpages: 1005659
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13643 pages used for memmap
[ 0.000000] DMA32 zone: 873151 pages, LIFO batch:31
[ 0.000000] Normal zone: 2008 pages used for memmap
[ 0.000000] Normal zone: 128512 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd5c10000-0xd630efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd630f000-0xd631efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd631f000-0xd6429fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd642a000-0xd670cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd670e000-0xd6750fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd7000000-0xd77fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd7800000-0xdf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011f200000 s86592 r8192 d24000 u524288
[ 0.000000] pcpu-alloc: s86592 r8192 d24000 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 989923
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12.7-031207-generic root=UUID=7f1378fa-0837-48fa-aa07-74ee97a6170a ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3858480K/4022636K available (7539K kernel code, 1118K rwdata, 3472K rodata, 1340K init, 1416K bss, 164156K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-255.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16252928 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 3392.585 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6785.17 BogoMIPS (lpj=13570340)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000019] Security Framework initialized
[ 0.000033] AppArmor: AppArmor initialized
[ 0.000033] Yama: becoming mindful.
[ 0.000249] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001234] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001679] Mount-cache hash table entries: 256
[ 0.001820] Initializing cgroup subsys memory
[ 0.001829] Initializing cgroup subsys devices
[ 0.001830] Initializing cgroup subsys freezer
[ 0.001831] Initializing cgroup subsys blkio
[ 0.001832] Initializing cgroup subsys perf_event
[ 0.001834] Initializing cgroup subsys hugetlb
[ 0.001851] CPU: Physical Processor ID: 0
[ 0.001852] CPU: Processor Core ID: 0
[ 0.001856] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.001856] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.001859] mce: CPU supports 7 MCE banks
[ 0.001868] CPU0: Thermal monitoring enabled (TM1)
[ 0.001875] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.001875] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.001875] tlb_flushall_shift: 1
[ 0.001971] Freeing SMP alternatives memory: 28K (ffffffff81e68000 - ffffffff81e6f000)
[ 0.002832] ACPI: Core revision 20130725
[ 0.006426] ACPI: All ACPI Tables successfully acquired
[ 0.017368] ftrace: allocating 31012 entries in 122 pages
[ 0.028791] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068497] smpboot: CPU0: Intel(R) Core(TM) i3-3240 CPU @ 3.40GHz (fam: 06, model: 3a, stepping: 09)
[ 0.068504] TSC deadline timer enabled
[ 0.070046] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.070052] ... version: 3
[ 0.070053] ... bit width: 48
[ 0.070054] ... generic registers: 4
[ 0.070054] ... value mask: 0000ffffffffffff
[ 0.070055] ... max period: 0000ffffffffffff
[ 0.070056] ... fixed-purpose events: 3
[ 0.070056] ... event mask: 000000070000000f
[ 0.084278] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.071195] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK
[ 0.110531] Brought up 4 CPUs
[ 0.110535] smpboot: Total of 4 processors activated (27140.68 BogoMIPS)
[ 0.113202] devtmpfs: initialized
[ 0.116245] EVM: security.selinux
[ 0.116246] EVM: security.SMACK64
[ 0.116247] EVM: security.capability
[ 0.116279] PM: Registering ACPI NVS region [mem 0xd631f000-0xd6429fff] (1093632 bytes)
[ 0.116290] PM: Registering ACPI NVS region [mem 0xd670e000-0xd6750fff] (274432 bytes)
[ 0.116819] pinctrl core: initialized pinctrl subsystem
[ 0.116859] regulator-dummy: no parameters
[ 0.116887] RTC time: 16:15:30, date: 01/14/14
[ 0.116909] NET: Registered protocol family 16
[ 0.116974] cpuidle: using governor ladder
[ 0.116975] cpuidle: using governor menu
[ 0.116998] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.116999] ACPI: bus type PCI registered
[ 0.117001] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.117035] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.117037] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.121676] PCI: Using configuration type 1 for base access
[ 0.122240] bio: create slab <bio-0> at 0
[ 0.122348] ACPI: Added _OSI(Module Device)
[ 0.122349] ACPI: Added _OSI(Processor Device)
[ 0.122350] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.122351] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.123484] ACPI: EC: Look up EC in DSDT
[ 0.124661] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.126822] ACPI: SSDT 00000000d62bb018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.127105] ACPI: Dynamic OEM Table Load:
[ 0.127107] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.130740] ACPI: SSDT 00000000d62bca98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.131041] ACPI: Dynamic OEM Table Load:
[ 0.131043] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.134645] ACPI: SSDT 00000000d62bdc18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.134924] ACPI: Dynamic OEM Table Load:
[ 0.134925] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.138948] ACPI: Interpreter enabled
[ 0.138952] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[ 0.138955] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.138964] ACPI: (supports S0 S3 S4 S5)
[ 0.138965] ACPI: Using IOAPIC for interrupt routing
[ 0.138983] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.139094] ACPI: No dock devices found.
[ 0.143707] ACPI: Power Resource [FN00] (off)
[ 0.143759] ACPI: Power Resource [FN01] (off)
[ 0.143811] ACPI: Power Resource [FN02] (off)
[ 0.143863] ACPI: Power Resource [FN03] (off)
[ 0.143912] ACPI: Power Resource [FN04] (off)
[ 0.144347] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.144496] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.144630] acpi PNP0A08:00: ACPI _OSC control (0x18) granted
[ 0.145085] PCI host bridge to bus 0000:00
[ 0.145087] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.145088] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.145090] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.145091] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.145092] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.145093] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.145094] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.145095] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.145097] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.145098] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.145099] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 0.145105] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[ 0.145175] pci 0000:00:02.0: [8086:0152] type 00 class 0x030000
[ 0.145184] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.145188] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.145191] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.145275] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.145296] pci 0000:00:16.0: reg 0x10: [mem 0xf7d2b000-0xf7d2b00f 64bit]
[ 0.145368] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.145440] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
[ 0.145457] pci 0000:00:19.0: reg 0x10: [mem 0xf7d00000-0xf7d1ffff]
[ 0.145465] pci 0000:00:19.0: reg 0x14: [mem 0xf7d29000-0xf7d29fff]
[ 0.145473] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 0.145533] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.145600] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.145619] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d28000-0xf7d283ff]
[ 0.145705] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.145757] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.145784] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.145799] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d20000-0xf7d23fff 64bit]
[ 0.145862] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.145904] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.145927] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.146002] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.146046] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.146068] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.146142] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.146185] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.146219] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.146238] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d27000-0xf7d273ff]
[ 0.146323] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.146374] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.146399] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[ 0.146557] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.146574] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.146582] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.146589] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.146596] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.146604] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.146611] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d26000-0xf7d267ff]
[ 0.146653] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.146710] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.146724] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d25000-0xf7d250ff 64bit]
[ 0.146743] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.146863] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.146974] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.147001] pci 0000:02:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
[ 0.147174] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.147229] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.157486] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.157497] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.157535] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.157980] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.158018] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.158055] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.158091] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.158127] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.158165] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.158202] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.158239] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.158421] ACPI: Enabled 7 GPEs in block 00 to 3F
[ 0.158426] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.158468] Found 1 acpi root devices
[ 0.158536] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.158538] vgaarb: loaded
[ 0.158539] vgaarb: bridge control possible 0000:00:02.0
[ 0.158646] SCSI subsystem initialized
[ 0.158685] libata version 3.00 loaded.
[ 0.158707] ACPI: bus type USB registered
[ 0.158719] usbcore: registered new interface driver usbfs
[ 0.158725] usbcore: registered new interface driver hub
[ 0.158744] usbcore: registered new device driver usb
[ 0.158812] PCI: Using ACPI for IRQ routing
[ 0.160269] PCI: pci_cache_line_size set to 64 bytes
[ 0.160303] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.160305] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.160306] e820: reserve RAM buffer [mem 0xd5c10000-0xd7ffffff]
[ 0.160307] e820: reserve RAM buffer [mem 0xd670e000-0xd7ffffff]
[ 0.160308] e820: reserve RAM buffer [mem 0xd7000000-0xd7ffffff]
[ 0.160309] e820: reserve RAM buffer [mem 0x11f600000-0x11fffffff]
[ 0.160373] NetLabel: Initializing
[ 0.160374] NetLabel: domain hash size = 128
[ 0.160375] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.160381] NetLabel: unlabeled traffic allowed by default
[ 0.160426] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.160430] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.162459] Switched to clocksource hpet
[ 0.165824] AppArmor: AppArmor Filesystem Enabled
[ 0.165847] pnp: PnP ACPI init
[ 0.165857] ACPI: bus type PNP registered
[ 0.165944] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.165947] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.165957] pnp 00:01: [dma 4]
[ 0.165965] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.165978] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.166043] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.166068] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.166070] system 00:04: [io 0x1000-0x100f] has been reserved
[ 0.166072] system 00:04: [io 0xffff] has been reserved
[ 0.166073] system 00:04: [io 0xffff] has been reserved
[ 0.166074] system 00:04: [io 0x0400-0x0453] could not be reserved
[ 0.166076] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.166077] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.166078] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.166080] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.166102] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.166130] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.166132] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.166219] system 00:07: [io 0x0a00-0x0a0f] has been reserved
[ 0.166221] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.166251] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.166282] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.166415] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.166417] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.166433] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.166611] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.166613] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.166614] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.166615] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.166617] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.166618] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.166619] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.166621] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.166622] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[ 0.166624] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.166625] system 00:0c: [mem 0xdfa00000-0xdfa00fff] has been reserved
[ 0.166627] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.166731] system 00:0d: [mem 0x20000000-0x201fffff] has been reserved
[ 0.166733] system 00:0d: [mem 0x40004000-0x40004fff] has been reserved
[ 0.166735] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.166749] pnp: PnP ACPI: found 14 devices
[ 0.166750] ACPI: bus type PNP unregistered
[ 0.172769] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.172780] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.172785] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.172793] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.172794] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.172795] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.172796] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.172798] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.172799] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.172800] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.172801] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.172802] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.172803] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
[ 0.172805] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.172826] NET: Registered protocol family 2
[ 0.172938] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.173070] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.173167] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.173182] TCP: reno registered
[ 0.173188] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.173203] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.173247] NET: Registered protocol family 1
[ 0.173255] pci 0000:00:02.0: Boot video device
[ 0.210701] PCI: CLS 64 bytes, default 64
[ 0.210734] Trying to unpack rootfs image as initramfs...
[ 0.410617] Freeing initrd memory: 17552K (ffff880035da8000 - ffff880036ecc000)
[ 0.410622] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.410624] software IO TLB [mem 0xd1c10000-0xd5c10000] (64MB) mapped at [ffff8800d1c10000-ffff8800d5c0ffff]
[ 0.410808] Scanning for low memory corruption every 60 seconds
[ 0.411029] Initialise module verification
[ 0.411061] audit: initializing netlink socket (disabled)
[ 0.411070] type=2000 audit(1389716130.400:1): initialized
[ 0.431243] bounce pool size: 64 pages
[ 0.431253] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.431975] zbud: loaded
[ 0.432073] VFS: Disk quotas dquot_6.5.2
[ 0.432099] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.432400] fuse init (API version 7.22)
[ 0.432447] msgmni has been set to 7570
[ 0.432849] Key type asymmetric registered
[ 0.432850] Asymmetric key parser 'x509' registered
[ 0.432868] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.432897] io scheduler noop registered
[ 0.432898] io scheduler deadline registered (default)
[ 0.432912] io scheduler cfq registered
[ 0.433127] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.433136] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.534399] Console: switching to colour frame buffer device 240x67
[ 0.634568] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[ 0.634573] intel_idle: MWAIT substates: 0x1120
[ 0.634574] intel_idle: v0.4 model 0x3A
[ 0.634575] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.634694] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.634698] ACPI: Power Button [PWRB]
[ 0.634719] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.634720] ACPI: Power Button [PWRF]
[ 0.634761] ACPI: Fan [FAN0] (off)
[ 0.634778] ACPI: Fan [FAN1] (off)
[ 0.634793] ACPI: Fan [FAN2] (off)
[ 0.634811] ACPI: Fan [FAN3] (off)
[ 0.634827] ACPI: Fan [FAN4] (off)
[ 0.634858] ACPI: Requesting acpi_cpufreq
[ 0.650916] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.650917] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.651053] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.651054] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.651073] GHES: HEST is not enabled!
[ 0.651132] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.652102] Linux agpgart interface v0.103
[ 0.652876] brd: module loaded
[ 0.653239] loop: module loaded
[ 0.653435] libphy: Fixed MDIO Bus: probed
[ 0.653483] tun: Universal TUN/TAP device driver, 1.6
[ 0.653484] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.653510] PPP generic driver version 2.4.2
[ 0.653538] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.653540] ehci-pci: EHCI PCI platform driver
[ 0.653624] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 0.653631] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.653634] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.653646] ehci-pci 0000:00:1a.0: debug port 2
[ 0.657547] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.657560] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d28000
[ 0.666705] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.666737] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.666738] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.666740] usb usb1: Product: EHCI Host Controller
[ 0.666741] usb usb1: Manufacturer: Linux 3.12.7-031207-generic ehci_hcd
[ 0.666742] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.666813] hub 1-0:1.0: USB hub found
[ 0.666818] hub 1-0:1.0: 2 ports detected
[ 0.666952] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 0.666957] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.666959] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.666970] ehci-pci 0000:00:1d.0: debug port 2
[ 0.670859] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.670870] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d27000
[ 0.682712] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.682734] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.682735] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.682736] usb usb2: Product: EHCI Host Controller
[ 0.682737] usb usb2: Manufacturer: Linux 3.12.7-031207-generic ehci_hcd
[ 0.682738] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.682885] hub 2-0:1.0: USB hub found
[ 0.682893] hub 2-0:1.0: 2 ports detected
[ 0.682971] ehci-platform: EHCI generic platform driver
[ 0.682976] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.682977] ohci-platform: OHCI generic platform driver
[ 0.682980] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.683031] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.683034] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[ 0.683211] xhci_hcd 0000:02:00.0: irq 40 for MSI/MSI-X
[ 0.683214] xhci_hcd 0000:02:00.0: irq 41 for MSI/MSI-X
[ 0.683218] xhci_hcd 0000:02:00.0: irq 42 for MSI/MSI-X
[ 0.683221] xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X
[ 0.683224] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
[ 0.683334] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.683335] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.683336] usb usb3: Product: xHCI Host Controller
[ 0.683337] usb usb3: Manufacturer: Linux 3.12.7-031207-generic xhci_hcd
[ 0.683338] usb usb3: SerialNumber: 0000:02:00.0
[ 0.683480] hub 3-0:1.0: USB hub found
[ 0.683490] hub 3-0:1.0: 2 ports detected
[ 0.683542] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.683545] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[ 0.686638] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.686639] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.686640] usb usb4: Product: xHCI Host Controller
[ 0.686642] usb usb4: Manufacturer: Linux 3.12.7-031207-generic xhci_hcd
[ 0.686643] usb usb4: SerialNumber: 0000:02:00.0
[ 0.686760] hub 4-0:1.0: USB hub found
[ 0.686772] hub 4-0:1.0: 2 ports detected
[ 0.694880] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.697789] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.697795] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.697944] mousedev: PS/2 mouse device common for all mice
[ 0.698196] rtc_cmos 00:05: RTC can wake from S4
[ 0.698357] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.698387] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.698426] device-mapper: uevent: version 1.0.3
[ 0.698481] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
[ 0.698485] Intel P-state driver initializing.
[ 0.698492] Intel pstate controlling: cpu 0
[ 0.698506] Intel pstate controlling: cpu 1
[ 0.698514] Intel pstate controlling: cpu 2
[ 0.698521] Intel pstate controlling: cpu 3
[ 0.698535] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.698586] TCP: cubic registered
[ 0.698636] NET: Registered protocol family 10
[ 0.698761] NET: Registered protocol family 17
[ 0.698767] Key type dns_resolver registered
[ 0.699001] Loading module verification certificates
[ 0.699571] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 43ccd1524d27446e21ecbca9f9432d403105c555'
[ 0.699580] registered taskstats version 1
[ 0.701445] Key type trusted registered
[ 0.702863] Key type encrypted registered
[ 0.704279] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.704490] Magic number: 14:436:287
[ 0.704513] tty tty20: hash matches
[ 0.704578] rtc_cmos 00:05: setting system clock to 2014-01-14 16:15:31 UTC (1389716131)
[ 0.704619] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.704620] EDD information not available.
[ 0.704655] PM: Hibernation image not present or could not be loaded.
[ 0.705395] Freeing unused kernel memory: 1340K (ffffffff81d19000 - ffffffff81e68000)
[ 0.705396] Write protecting the kernel read-only data: 12288k
[ 0.706366] Freeing unused kernel memory: 644K (ffff88000175f000 - ffff880001800000)
[ 0.707778] Freeing unused kernel memory: 624K (ffff880001b64000 - ffff880001c00000)
[ 0.720832] systemd-udevd[115]: starting version 204
[ 0.743147] pps_core: LinuxPPS API ver. 1 registered
[ 0.743151] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.744325] PTP clock support registered
[ 0.745227] ahci 0000:00:1f.2: version 3.0
[ 0.745376] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 0.745425] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.745429] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.745433] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.748684] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 0.748686] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 0.751259] scsi0 : ahci
[ 0.751333] scsi1 : ahci
[ 0.751400] scsi2 : ahci
[ 0.751445] scsi3 : ahci
[ 0.751473] ata1: SATA max UDMA/133 abar m2048@0xf7d26000 port 0xf7d26100 irq 45
[ 0.751475] ata2: SATA max UDMA/133 abar m2048@0xf7d26000 port 0xf7d26180 irq 45
[ 0.751476] ata3: DUMMY
[ 0.751477] ata4: DUMMY
[ 0.751762] e1000e 0000:00:19.0: setting latency timer to 64
[ 0.751827] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.751850] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 0.978881] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.015199] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 1.015203] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) e0:cb:4e:28:cb:a8
[ 1.015206] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.015249] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 1.070934] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.070958] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.082454] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.082460] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.082464] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.092772] ata2.00: ATA-8: MKNSSDCR60GB, 502ABBF0, max UDMA/133
[ 1.092776] ata2.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.102348] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.102353] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.102357] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.111356] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.111370] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.111619] hub 1-1:1.0: USB hub found
[ 1.111699] hub 1-1:1.0: 4 ports detected
[ 1.112748] ata2.00: configured for UDMA/133
[ 1.112934] scsi 1:0:0:0: Direct-Access ATA MKNSSDCR60GB 502A PQ: 0 ANSI: 5
[ 1.113111] sd 1:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 1.113125] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.113287] sd 1:0:0:0: [sda] Write Protect is off
[ 1.113291] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.113399] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.114211] sda: sda1 sda2
[ 1.114263] sda: p2 size 16384000 extends beyond EOD, enabling native capacity
[ 1.114935] sda: sda1 sda2
[ 1.114985] sda: p2 size 16384000 extends beyond EOD, truncated
[ 1.115246] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.223030] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.355506] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.355510] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.355856] hub 2-1:1.0: USB hub found
[ 1.355928] hub 2-1:1.0: 6 ports detected
[ 1.411087] tsc: Refined TSC clocksource calibration: 3392.293 MHz
[ 1.467150] usb 3-1: new full-speed USB device number 2 using xhci_hcd
[ 1.533118] usb 3-1: New USB device found, idVendor=147a, idProduct=e03e
[ 1.533122] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.533124] usb 3-1: Product: eHome Infrared Transceiver
[ 1.533126] usb 3-1: Manufacturer: Formosa21
[ 1.533128] usb 3-1: SerialNumber: 0000A590
[ 1.533274] usb 3-1: ep 0x83 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.538322] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.552204] usbcore: registered new interface driver usbhid
[ 1.552206] usbhid: USB HID core driver
[ 1.553912] hid-generic 0003:147A:E03E.0001: hiddev0,hidraw0: USB HID v1.00 Device [Formosa21 eHome Infrared Transceiver] on usb-0000:02:00.0-1/input1
[ 1.607356] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.703151] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c52f
[ 1.703156] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.703168] usb 1-1.1: Product: USB Receiver
[ 1.703182] usb 1-1.1: Manufacturer: Logitech
[ 1.705501] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input4
[ 1.705654] hid-generic 0003:046D:C52F.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input0
[ 1.708251] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input5
[ 1.708525] hid-generic 0003:046D:C52F.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input1
[ 1.779416] usb 1-1.2: new full-speed USB device number 4 using ehci-pci
[ 1.875107] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c52b
[ 1.875111] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.875113] usb 1-1.2: Product: USB Receiver
[ 1.875115] usb 1-1.2: Manufacturer: Logitech
[ 1.883227] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input2
[ 1.885676] input: Logitech Unifying Device. Wireless PID:2007 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/0003:046D:C52B.0006/input/input6
[ 1.885814] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2007] on usb-0000:00:1a.0-1.2:1
[ 2.411720] Switched to clocksource tsc
[ 6.155432] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 6.155435] EXT4-fs (sda1): write access will be enabled during recovery
[ 6.235803] EXT4-fs (sda1): recovery complete
[ 6.236238] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.323530] init: ureadahead main process (181) terminated with status 5
[ 6.384842] Adding 7673748k swap on /dev/sda2. Priority:-1 extents:1 across:7673748k SSFS
[ 6.438364] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
[ 6.445655] systemd-udevd[301]: starting version 204
[ 6.479208] lp: driver loaded but no devices found
[ 6.530291] mei_me 0000:00:16.0: setting latency timer to 64
[ 6.530334] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
[ 6.543740] [drm] Initialized drm 1.1.0 20060810
[ 6.547405] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
[ 6.547416] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.547423] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[ 6.547427] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_GPE.GPS0 2 (20130725/utaddress-251)
[ 6.547430] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.547432] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[ 6.547434] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_GPE.GPS0 2 (20130725/utaddress-251)
[ 6.547437] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.547439] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[ 6.547441] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_GPE.GPS0 2 (20130725/utaddress-251)
[ 6.547444] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.547445] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.569950] [drm] Memory usable by graphics device = 2048M
[ 6.570052] checking generic (e0000000 7e9000) vs hw (e0000000 10000000)
[ 6.570054] fb: conflicting fb hw usage inteldrmfb vs simple - removing generic driver
[ 6.570082] Console: switching to colour dummy device 80x25
[ 6.570288] i915 0000:00:02.0: setting latency timer to 64
[ 6.582578] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x17
[ 6.599471] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[ 6.599482] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.599483] [drm] Driver supports precise vblank timestamp query.
[ 6.599540] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.641464] Registered IR keymap rc-rc6-mce
[ 6.641587] input: Media Center Ed. eHome Infrared Remote Transceiver (147a:e03e) as /devices/pci0000:00/0000:00:1c.1/0000:02:00.0/usb3/3-1/3-1:1.0/rc/rc0/input8
[ 6.641634] rc0: Media Center Ed. eHome Infrared Remote Transceiver (147a:e03e) as /devices/pci0000:00/0000:00:1c.1/0000:02:00.0/usb3/3-1/3-1:1.0/rc/rc0
[ 6.646339] IR NEC protocol handler initialized
[ 6.649507] IR RC5(x) protocol handler initialized
[ 6.652959] IR RC6 protocol handler initialized
[ 6.657904] IR Sony protocol handler initialized
[ 6.658400] IR JVC protocol handler initialized
[ 6.659799] IR SANYO protocol handler initialized
[ 6.665384] IR MCE Keyboard/mouse protocol handler initialized
[ 6.670425] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input9
[ 6.670945] lirc_dev: IR Remote Control driver registered, major 248
[ 6.672481] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
[ 6.672483] IR LIRC bridge handler initialized
[ 6.729946] Bluetooth: Core ver 2.16
[ 6.729984] NET: Registered protocol family 31
[ 6.729986] Bluetooth: HCI device and connection manager initialized
[ 6.729994] Bluetooth: HCI socket layer initialized
[ 6.729996] Bluetooth: L2CAP socket layer initialized
[ 6.730001] Bluetooth: SCO socket layer initialized
[ 6.754391] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.754395] Bluetooth: BNEP filters: protocol multicast
[ 6.754404] Bluetooth: BNEP socket layer initialized
[ 6.757264] Bluetooth: RFCOMM TTY layer initialized
[ 6.757279] Bluetooth: RFCOMM socket layer initialized
[ 6.757281] Bluetooth: RFCOMM ver 1.11
[ 6.762291] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x17
[ 6.782090] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x17
[ 6.783709] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x17
[ 6.785511] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 6.801245] ppdev: user-space parallel port driver
[ 6.805877] init: avahi-cups-reload main process (560) terminated with status 1
[ 6.842916] mceusb 3-1:1.0: Registered Formosa21 eHome Infrared Transceiver with mce emulator interface version 2
[ 6.842920] mceusb 3-1:1.0: 0 tx ports (0x0 cabled) and 1 rx sensors (0x1 active)
[ 6.842965] usbcore: registered new interface driver mceusb
[ 6.987558] type=1400 audit(1389716137.774:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=448 comm="apparmor_parser"
[ 6.987684] type=1400 audit(1389716137.774:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=448 comm="apparmor_parser"
[ 6.987795] type=1400 audit(1389716137.774:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=448 comm="apparmor_parser"
[ 7.174740] type=1400 audit(1389716137.962:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=593 comm="apparmor_parser"
[ 7.199962] type=1400 audit(1389716137.986:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=586 comm="apparmor_parser"
[ 7.200075] type=1400 audit(1389716137.986:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=586 comm="apparmor_parser"
[ 7.200173] type=1400 audit(1389716137.986:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=586 comm="apparmor_parser"
[ 7.264348] fbcon: inteldrmfb (fb0) is primary device
[ 7.334827] type=1400 audit(1389716138.122:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=589 comm="apparmor_parser"
[ 7.335018] type=1400 audit(1389716138.122:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=589 comm="apparmor_parser"
[ 7.353648] type=1400 audit(1389716138.138:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=599 comm="apparmor_parser"
[ 7.806295] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 7.886143] Console: switching to colour frame buffer device 240x67
[ 7.986470] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 7.986471] i915 0000:00:02.0: registered panic notifier
[ 7.996328] acpi device:4b: registered as cooling_device10
[ 7.996599] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 7.996648] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 7.997027] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.997446] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 8.015874] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 8.015879] speaker_outs=1 (0x1a/0x0/0x0/0x0/0x0)
[ 8.015880] hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.015881] mono: mono_out=0x0
[ 8.015883] dig-out=0x1e/0x0
[ 8.015883] inputs:
[ 8.015885] Mic=0x18
[ 8.015887] Internal Mic=0x12
[ 8.036513] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 8.036654] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 8.037142] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 8.037285] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 8.037389] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.051745] init: failsafe main process (634) killed by TERM signal
[ 8.322427] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 8.426343] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 8.426466] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 11.776716] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 11.776751] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 12.536825] audit_printk_skb: 54 callbacks suppressed
[ 12.536829] type=1400 audit(1389716143.322:30): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=903 comm="apparmor_parser"
[ 12.537299] type=1400 audit(1389716143.322:31): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=903 comm="apparmor_parser"
[ 12.538233] type=1400 audit(1389716143.322:32): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=903 comm="apparmor_parser"
[ 12.538520] type=1400 audit(1389716143.322:33): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=903 comm="apparmor_parser"
[ 12.539107] type=1400 audit(1389716143.322:34): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=903 comm="apparmor_parser"
[ 12.539361] type=1400 audit(1389716143.322:35): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=903 comm="apparmor_parser"
[-- Attachment #5: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2014-01-15 7:38 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-15 7:21 bjoern [this message]
2014-01-15 15:40 ` Kernel 3.12.x breaks video playback using XBMC on Intel bjoern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140115082148.4549087d@ubuntu \
--to=lkml@call-home.ch \
--cc=dri-devel@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.