All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Milan Svoboda" <milan.svoboda-aRb0bU7PRFPrBKCeMvbIDA@public.gmane.org>
To: "Sarah Sharp" <sarah.a.sharp-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Cc: linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	"USB Storage List"
	<usb-storage-ijkIwGHArpdIPJnuZ7Njw4oP9KaGy4wf@public.gmane.org>,
	linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: usb disk recognized but fails
Date: Mon, 20 Jan 2014 20:00:23 +0100	[thread overview]
Message-ID: <20140120200023.5F31B6AF@centrum.cz> (raw)
In-Reply-To: <20140120182319.GB5545@xanatos>

Non-working:

3.12.7-2-ARCH #1 SMP PREEMPT Sun Jan 12 13:09:09 CET 2014 x86_64 GNU/Linux

I'm sorry, I don't remember exactly which version worked, I have had the disk connected to TV for
a long time and only recently I wanted to copy some movies on it. I guess it worked something like
6 or 9 months ago.

Milan

______________________________________________________________
> Od: Sarah Sharp <sarah.a.sharp-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
> Komu: Milan Svoboda <milan.svoboda-aRb0bU7PRFPrBKCeMvbIDA@public.gmane.org>
> Datum: 20.01.2014 19:23
> Předmět: Re: usb disk recognized but fails
>
> CC: linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, "USB Storage List" <usb-storage@lists.one-eyed-alien.net>, linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>Cc-ing the USB storage list, in case this device needs some quirk.
>
>On Wed, Jan 15, 2014 at 03:47:39PM +0100, Milan Svoboda wrote:
>> The SATA adapter has a power input, but it is not used, it is connected to the
>> PC with Y-type USB cable.
>> 
>> The disk works with my "smart" TV, it works with Windows on the same machine,
>> it also had worked some time ago with Linux, but now it shows the following:
>
>Do you know which kernel version it worked with?  What version are you
>currently running?  Please run `uname -a`.
>
>> [ 2192.027213] usb 1-3: new high-speed USB device number 5 using xhci_hcd
>> [ 2192.042323] ums-cypress 1-3:1.0: USB Mass Storage device detected
>> [ 2192.042500] scsi9 : usb-storage 1-3:1.0
>> [ 2193.044219] scsi 9:0:0:0: Direct-Access     WDC WD64 00BPVT-00HXZT0        PQ: 0 ANSI: 0
>> [ 2193.045083] sd 9:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
>> [ 2193.045240] sd 9:0:0:0: [sdb] Write Protect is off
>> [ 2193.045245] sd 9:0:0:0: [sdb] Mode Sense: 03 00 00 00
>> [ 2193.045384] sd 9:0:0:0: [sdb] No Caching mode page found
>> [ 2193.045388] sd 9:0:0:0: [sdb] Assuming drive cache: write through
>> [ 2193.046259] sd 9:0:0:0: [sdb] No Caching mode page found
>> [ 2193.046264] sd 9:0:0:0: [sdb] Assuming drive cache: write through
>> [ 2193.054389]  sdb: sdb1
>> [ 2193.055092] sd 9:0:0:0: [sdb] No Caching mode page found
>> [ 2193.055095] sd 9:0:0:0: [sdb] Assuming drive cache: write through
>> [ 2193.055098] sd 9:0:0:0: [sdb] Attached SCSI disk
>> [ 2200.821345] usb 1-3: reset high-speed USB device number 5 using xhci_hcd
>> [ 2200.835063] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bc71e480
>> [ 2200.835068] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bc71e4c0
>> [ 2267.897715] sd 9:0:0:0: [sdb] Unhandled sense code
>> [ 2267.897719] sd 9:0:0:0: [sdb]  
>> [ 2267.897721] Result: hostbyte=0x07 driverbyte=0x08
>> [ 2267.897722] sd 9:0:0:0: [sdb]  
>> [ 2267.897724] Sense Key : 0x4 [current] 
>> [ 2267.897735] sd 9:0:0:0: [sdb]  
>> [ 2267.897736] ASC=0x0 ASCQ=0x0
>> [ 2267.897738] sd 9:0:0:0: [sdb] CDB: 
>> [ 2267.897740] cdb[0]=0x28: 28 00 4a 85 6e af 00 00 08 00
>> [ 2267.897746] end_request: I/O error, dev sdb, sector 1250258607
>> [ 2267.897750] Buffer I/O error on device sdb1, logical block 625129272
>> [ 2267.897752] Buffer I/O error on device sdb1, logical block 625129273
>> [ 2267.897753] Buffer I/O error on device sdb1, logical block 625129274
>> [ 2267.897754] Buffer I/O error on device sdb1, logical block 625129275
>> [ 2270.884154] usb 1-3: USB disconnect, device number 5
>> 
>> Bus 001 Device 010: ID 14cd:6116 Super Top M6116 SATA Bridge
>> Device Descriptor:
>>   bLength                18
>>   bDescriptorType         1
>>   bcdUSB               2.00
>>   bDeviceClass            0 (Defined at Interface level)
>>   bDeviceSubClass         0 
>>   bDeviceProtocol         0 
>>   bMaxPacketSize0        64
>>   idVendor           0x14cd Super Top
>>   idProduct          0x6116 M6116 SATA Bridge
>>   bcdDevice            1.50
>>   iManufacturer           1 Super Top   
>>   iProduct                3 USB 2.0  SATA BRIDGE   
>>   iSerial                 2 M6116018VE15
>>   bNumConfigurations      1
>>   Configuration Descriptor:
>>     bLength                 9
>>     bDescriptorType         2
>>     wTotalLength           32
>>     bNumInterfaces          1
>>     bConfigurationValue     1
>>     iConfiguration          0 
>>     bmAttributes         0xc0
>>       Self Powered
>>     MaxPower                2mA
>>     Interface Descriptor:
>>       bLength                 9
>>       bDescriptorType         4
>>       bInterfaceNumber        0
>>       bAlternateSetting       0
>>       bNumEndpoints           2
>>       bInterfaceClass         8 Mass Storage
>>       bInterfaceSubClass      6 SCSI
>>       bInterfaceProtocol     80 Bulk-Only
>>       iInterface              0 
>>       Endpoint Descriptor:
>>         bLength                 7
>>         bDescriptorType         5
>>         bEndpointAddress     0x81  EP 1 IN
>>         bmAttributes            2
>>           Transfer Type            Bulk
>>           Synch Type               None
>>           Usage Type               Data
>>         wMaxPacketSize     0x0200  1x 512 bytes
>>         bInterval               0
>>       Endpoint Descriptor:
>>         bLength                 7
>>         bDescriptorType         5
>>         bEndpointAddress     0x02  EP 2 OUT
>>         bmAttributes            2
>>           Transfer Type            Bulk
>>           Synch Type               None
>>           Usage Type               Data
>>         wMaxPacketSize     0x0200  1x 512 bytes
>>         bInterval               0
>> Device Qualifier (for other device speed):
>>   bLength                10
>>   bDescriptorType         6
>>   bcdUSB               2.00
>>   bDeviceClass            0 (Defined at Interface level)
>>   bDeviceSubClass         0 
>>   bDeviceProtocol         0 
>>   bMaxPacketSize0        64
>>   bNumConfigurations      1
>> Device Status:     0x0001
>>   Self Powered
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
>> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2014-01-20 19:00 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20140115154739.7DC8AFD8@centrum.cz>
2014-01-20 18:23 ` usb disk recognized but fails Sarah Sharp
2014-01-20 19:00   ` Milan Svoboda [this message]
     [not found]     ` <20140120200023.5F31B6AF-aRb0bU7PRFPrBKCeMvbIDA@public.gmane.org>
2014-01-20 19:45       ` Sarah Sharp
2014-01-21 20:56         ` Milan Svoboda
     [not found]           ` <20140121215636.F5422382-aRb0bU7PRFPrBKCeMvbIDA@public.gmane.org>
2014-01-21 22:12             ` [usb-storage] " Alan Stern
2014-01-22 19:19               ` Milan Svoboda
2014-01-22 19:59                 ` Alan Stern
2014-01-22 21:07                   ` Milan Svoboda
     [not found]                     ` <20140122220717.D61BDE5D-aRb0bU7PRFPrBKCeMvbIDA@public.gmane.org>
2014-01-22 21:34                       ` Alan Stern
     [not found]                         ` <Pine.LNX.4.44L0.1401221632200.1310-100000-IYeN2dnnYyZXsRXLowluHWD2FQJk+8+b@public.gmane.org>
2014-01-23 12:08                           ` Milan Svoboda
2014-01-23 16:54                             ` Alan Stern

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140120200023.5F31B6AF@centrum.cz \
    --to=milan.svoboda-arb0bu7prfprbkcemvbida@public.gmane.org \
    --cc=linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=sarah.a.sharp-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
    --cc=usb-storage-ijkIwGHArpdIPJnuZ7Njw4oP9KaGy4wf@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.