All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: akash.goel@intel.com
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 6/6] drm/i915/vlv: Added a rendering specific Hw WA 'WaSendDummy3dPrimitveAfterSetContext'
Date: Wed, 22 Jan 2014 13:18:45 +0200	[thread overview]
Message-ID: <20140122111845.GO9454@intel.com> (raw)
In-Reply-To: <1390362310-15963-7-git-send-email-akash.goel@intel.com>

On Wed, Jan 22, 2014 at 09:15:10AM +0530, akash.goel@intel.com wrote:
> From: Akash Goel <akash.goel@intel.com>
> 
> This workaround is needed on VLV for the HW context feature.
> It is used after adding the mi_set_context command in ring buffer
> for Hw context switch. As per the spec
> "The software must send a pipe_control with a CS stall and a post sync
> operation and then a dummy DRAW after every MI_SET_CONTEXT and after any
> PIPELINE_SELECT that is enabling 3D mode".

This is also listed for IVB.

> 
> Signed-off-by: Akash Goel <akash.goel@intel.com>
> ---
>  drivers/gpu/drm/i915/i915_gem_context.c | 64 +++++++++++++++++++++++++++++++--
>  drivers/gpu/drm/i915/i915_reg.h         |  3 ++
>  drivers/gpu/drm/i915/intel_ringbuffer.c |  9 +++++
>  drivers/gpu/drm/i915/intel_ringbuffer.h |  1 +
>  4 files changed, 75 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_gem_context.c b/drivers/gpu/drm/i915/i915_gem_context.c
> index ebe0f67..62a5362 100644
> --- a/drivers/gpu/drm/i915/i915_gem_context.c
> +++ b/drivers/gpu/drm/i915/i915_gem_context.c
> @@ -532,6 +532,58 @@ i915_gem_context_get(struct drm_i915_file_private *file_priv, u32 id)
>  	return (struct i915_hw_context *)idr_find(&file_priv->context_idr, id);
>  }
>  
> +static inline void
> +mi_set_context_dummy3d_prim_wa(struct intel_ring_buffer *ring)
> +{
> +	u32 scratch_addr;
> +	u32 flags = 0;
> +
> +	/*
> +	 * Check if we have the scratch page allocated needed
> +	 * for the Pipe Control command, otherwise don't apply
> +	 * the dummmy 3d primitive workaround & add NOOPs instead
> +	 */
> +	if (get_pipe_control_scratch_addr(ring)) {
> +		/* Actual scratch location is at 128 bytes offset */
> +		scratch_addr = get_pipe_control_scratch_addr(ring) + 128;
> +
> +		/*
> +		 * WaSendDummy3dPrimitveAfterSetContext
> +		 * Software must send a pipe_control with a CS stall
> +		 * and a post sync operation and then a dummy DRAW after
> +		 * every MI_SET_CONTEXT and after any PIPELINE_SELECT that
> +		 * is enabling 3D mode. A dummy draw is a 3DPRIMITIVE command
> +		 * with Indirect Parameter Enable set to 0, UAV Coherency
> +		 * Required set to 0, Predicate Enable set to 0,
> +		 * End Offset Enable set to 0, and Vertex Count Per Instance
> +		 * set to 0, All other parameters are a don't care.
> +		 */
> +
> +		/*
> +		 * Add a pipe control with CS Stall and postsync op
> +		 * before dummy 3D_PRIMITIVE
> +		 */
> +		flags |= PIPE_CONTROL_QW_WRITE | PIPE_CONTROL_CS_STALL;
> +		intel_ring_emit(ring, GFX_OP_PIPE_CONTROL(4));
> +		intel_ring_emit(ring, flags);
> +		intel_ring_emit(ring, scratch_addr | PIPE_CONTROL_GLOBAL_GTT);
> +		intel_ring_emit(ring, 0);
> +
> +		/* Add a dummy 3D_PRIMITVE */
> +		intel_ring_emit(ring, GFX_OP_3DPRIMITIVE());
> +		intel_ring_emit(ring, 4); /* PrimTopoType*/
> +		intel_ring_emit(ring, 0); /* VertexCountPerInstance */
> +		intel_ring_emit(ring, 0); /* StartVertexLocation */
> +		intel_ring_emit(ring, 0); /* InstanceCount */
> +		intel_ring_emit(ring, 0); /* StartInstanceLocation */
> +		intel_ring_emit(ring, 0); /* BaseVertexLocation  */
> +	} else {
> +		int i;
> +		for (i = 0; i < 11; i++)
> +			intel_ring_emit(ring, MI_NOOP);
> +	}
> +}
> +
>  static inline int
>  mi_set_context(struct intel_ring_buffer *ring,
>  	       struct i915_hw_context *new_context,
> @@ -550,7 +602,10 @@ mi_set_context(struct intel_ring_buffer *ring,
>  			return ret;
>  	}
>  
> -	ret = intel_ring_begin(ring, 6);
> +	if (IS_VALLEYVIEW(ring->dev))
> +		ret = intel_ring_begin(ring, 6+4+8);
> +	else
> +		ret = intel_ring_begin(ring, 6);
>  	if (ret)
>  		return ret;
>  
> @@ -571,7 +626,12 @@ mi_set_context(struct intel_ring_buffer *ring,
>  	intel_ring_emit(ring, MI_NOOP);
>  
>  	if (IS_GEN7(ring->dev))
> -		intel_ring_emit(ring, MI_ARB_ON_OFF | MI_ARB_ENABLE);
> +		if (IS_VALLEYVIEW(ring->dev)) {
> +			mi_set_context_dummy3d_prim_wa(ring);
> +			intel_ring_emit(ring, MI_ARB_ON_OFF | MI_ARB_ENABLE);
> +			intel_ring_emit(ring, MI_NOOP);
> +		} else
> +			intel_ring_emit(ring, MI_ARB_ON_OFF | MI_ARB_ENABLE);
>  	else
>  		intel_ring_emit(ring, MI_NOOP);
>  
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index d829754..649106d 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -335,6 +335,9 @@
>  #define   PIPE_CONTROL_DEPTH_CACHE_FLUSH		(1<<0)
>  #define   PIPE_CONTROL_GLOBAL_GTT (1<<2) /* in addr dword */
>  
> +#define GFX_OP_3DPRIMITIVE()              \
> +	((0x3<<29)|(0x3<<27)|(0x3<<24)|       \
> +	 (0x0<<16)|(0x0<<10)|(0x0<<8)|(7-2))
>  
>  /*
>   * Reset registers
> diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
> index 8b99df2..a93b631 100644
> --- a/drivers/gpu/drm/i915/intel_ringbuffer.c
> +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
> @@ -556,6 +556,15 @@ err:
>  	return ret;
>  }
>  
> +u32
> +get_pipe_control_scratch_addr(struct intel_ring_buffer *ring)
> +{
> +	if (ring->scratch.obj == NULL)
> +		return 0;
> +
> +	return ring->scratch.gtt_offset;
> +}
> +
>  static int init_render_ring(struct intel_ring_buffer *ring)
>  {
>  	struct drm_device *dev = ring->dev;
> diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h
> index 71a73f4..2ae6029 100644
> --- a/drivers/gpu/drm/i915/intel_ringbuffer.h
> +++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
> @@ -257,6 +257,7 @@ int intel_init_vebox_ring_buffer(struct drm_device *dev);
>  
>  u32 intel_ring_get_active_head(struct intel_ring_buffer *ring);
>  void intel_ring_setup_status_page(struct intel_ring_buffer *ring);
> +u32 get_pipe_control_scratch_addr(struct intel_ring_buffer *ring);
>  
>  static inline u32 intel_ring_get_tail(struct intel_ring_buffer *ring)
>  {
> -- 
> 1.8.5.2
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC

      reply	other threads:[~2014-01-22 11:18 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-22  3:45 [PATCH 0/6] Rendering specific Hw workarounds for VLV akash.goel
2014-01-22  3:45 ` [PATCH 1/6] drm/i915/vlv: Added a rendering specific Hw WA 'WaTlbInvalidateStoreDataBefore' akash.goel
2014-01-22 10:51   ` Ville Syrjälä
2014-01-22  3:45 ` [PATCH 2/6] drm/i915/vlv: Added a rendering specific Hw WA 'WaReadAfterWriteHazard' akash.goel
2014-01-22 10:54   ` Ville Syrjälä
2014-01-22 11:11     ` Chris Wilson
2014-03-21 11:53       ` Gupta, Sourab
2014-03-21 14:58         ` Daniel Vetter
2014-03-21 16:50           ` Gupta, Sourab
2014-01-22  3:45 ` [PATCH 3/6] drm/i915/vlv: Modified the programming of 2 regs in Ring initialisation akash.goel
2014-01-22 11:01   ` Ville Syrjälä
2014-01-22  3:45 ` [PATCH 4/6] drm/i915/vlv: Added 3 rendering specific Hw Workarounds in clock gating fn akash.goel
2014-01-22 11:10   ` Ville Syrjälä
2014-03-21 12:58     ` [PATCH 1/2] drm/i915/vlv:Implement WaDisable_RenderCache_OperationalFlush sourab.gupta
2014-03-21 12:58       ` [PATCH 2/2] drm/i915/vlv: Modified Implementation of WaDisableL3Bank2xClockGate sourab.gupta
2014-01-22  3:45 ` [PATCH 5/6] drm/i915/vlv: Removed 3 rendering specific Hw WA from clock gating fn akash.goel
2014-01-22 11:11   ` Ville Syrjälä
2014-01-22  3:45 ` [PATCH 6/6] drm/i915/vlv: Added a rendering specific Hw WA 'WaSendDummy3dPrimitveAfterSetContext' akash.goel
2014-01-22 11:18   ` Ville Syrjälä [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140122111845.GO9454@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=akash.goel@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.