From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: Jan Beulich <JBeulich@suse.com>
Cc: George Dunlap <george.dunlap@eu.citrix.com>,
Andrew Cooper <andrew.cooper3@citrix.com>,
Xen-devel <xen-devel@lists.xen.org>
Subject: Is: pci=assign-busses blows up Xen 4.4 Was:Re: [PATCH] x86/msi: Validate the guest-identified PCI devices in pci_prepare_msix()
Date: Fri, 24 Jan 2014 16:56:52 -0500 [thread overview]
Message-ID: <20140124215652.GA18710@phenom.dumpdata.com> (raw)
In-Reply-To: <20140124174349.GA15472@phenom.dumpdata.com>
[-- Attachment #1: Type: text/plain, Size: 17827 bytes --]
On Fri, Jan 24, 2014 at 12:43:49PM -0500, Konrad Rzeszutek Wilk wrote:
> On Fri, Jan 24, 2014 at 04:19:15PM +0000, Jan Beulich wrote:
> > >>> On 24.01.14 at 16:01, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote:
> > > I built the kernel without the igb driver just to eliminate it being
> > > the culprit. Now I can boot without issues and this is what lspci
> > > reports:
> > >
> > > -bash-4.1# lspci -s 02:00.0 -v
> > > 02:00.0 Ethernet controller: Intel Corporation 82576 Gigabit Network
> > > Connection (rev 01)
> > > Subsystem: Intel Corporation Gigabit ET Dual Port Server Adapter
> > > Flags: bus master, fast devsel, latency 0, IRQ 10
> > > Memory at f1420000 (32-bit, non-prefetchable) [size=128K]
> > > Memory at f1000000 (32-bit, non-prefetchable) [size=4M]
> > > I/O ports at e020 [size=32]
> > > Memory at f1444000 (32-bit, non-prefetchable) [size=16K]
> > > Expansion ROM at f0c00000 [disabled] [size=4M]
> > > Capabilities: [40] Power Management version 3
> > > Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
> > > Capabilities: [70] MSI-X: Enable- Count=10 Masked-
> >
> > So here's a patch to figure out why we don't find this.
>
> Thank you!
>
> See attached log. The corresponding xen-syms is compressed and
> updated at : http://darnok.org/xen/xen-syms.gz
>
> The interesting bit is:
>
> (XEN) 02:00.0: status=0010 (alloc_pdev+0xb4/0x2e9 wants 11)
> (XEN) 02:00.0: pos=40
> (XEN) 02:00.0: id=01
> (XEN) 02:00.0: pos=50
> (XEN) 02:00.0: id=05
> (XEN) 02:00.0: pos=70
> (XEN) 02:00.0: id=11
> (XEN) 02:00.1: status=0010 (alloc_pdev+0xb4/0x2e9 wants 11)
> (XEN) 02:00.1: pos=40
> (XEN) 02:00.1: id=01
> (XEN) 02:00.1: pos=50
> (XEN) 02:00.1: id=05
> (XEN) 02:00.1: pos=70
> (XEN) 02:00.1: id=11
You were right on the idea that it might be the device not having
the right capabilities, but it was the wrong BDF. I instrumented
the faulting operation to make sure I knew which BDF it was:
(XEN) 02:00.0: alloced (179)
(XEN) 02:00.0: alloced (189) ffff830239467f70,pdev ffff8302394660d0
(XEN) 02:00.1: alloced (179)
(XEN) 02:00.1: alloced (189) ffff830239466250,pdev ffff830239466190
(XEN) 04:00.0: alloced (179)
(XEN) 04:00.0: alloced (189) ffff830239466520,pdev ffff830239466460
(XEN) 05:00.0: status=0010 (alloc_pdev+0xb7/0x360 wants 11)
(XEN) 05:00.0: pos=60
(XEN) 05:00.0: id=0d
(XEN) 05:00.0: pos=a0
(XEN) 05:00.0: id=01
(XEN) 05:00.0: pos=00
(XEN) 05:00.0: no cap 11
(XEN) 08:00.0: alloced (179)
(XEN) 08:00.0: alloced (189) ffff830239466eb0,pdev ffff830239466df0
(XEN) [2014-01-25 03:42:08] msix_capability_init:759 for 05:00.0:, msix:0 dev:ffff8302394665b0
(XEN) [2014-01-25 03:42:08] ----[ Xen-4.4-rc2 x86_64 debug=y Tainted: C ]----
(XEN) [2014-01-25 03:42:08] CPU: 0
(XEN) [2014-01-25 03:42:08] RIP: e008:[<ffff82d0801683d6>] msix_capability_init+0x210/0x63e
... snip..
(XEN) [2014-01-25 03:42:08] Xen call trace:
(XEN) [2014-01-25 03:42:08] [<ffff82d0801683d6>] msix_capability_init+0x210/0x63e
(XEN) [2014-01-25 03:42:08] [<ffff82d0801689c2>] pci_enable_msi+0x1be/0x4d7
(XEN) [2014-01-25 03:42:08] [<ffff82d08016c68c>] map_domain_pirq+0x222/0x5ad
(XEN) [2014-01-25 03:42:08] [<ffff82d08017f134>] physdev_map_pirq+0x507/0x5d1
(XEN) [2014-01-25 03:42:08] [<ffff82d08017f844>] do_physdev_op+0x646/0x1232
(XEN) [2014-01-25 03:42:08] [<ffff82d0802223ab>] syscall_enter+0xeb/0x145
(XEN) [2014-01-25 03:42:08]
(XEN) [2014-01-25 03:42:08] Pagetable walk from 0000000000000004:
(XEN) [2014-01-25 03:42:08] L4[0x000] = 0000000000000000 ffffffffffffffff
(XEN) [2014-01-25 03:42:08]
(XEN) [2014-01-25 03:42:08] ****************************************
(XEN) [2014-01-25 03:42:08] Panic on CPU 0:
(XEN) [2014-01-25 03:42:08] FATAL PAGE FAULT
(XEN) [2014-01-25 03:42:08] [error_code=0000]
(XEN) [2014-01-25 03:42:08] Faulting linear address: 0000000000000004
(XEN) [2014-01-25 03:42:08] ****************************************
(XEN) [2014-01-25 03:42:08]
(XEN) [2014-01-25 03:42:08] Manual reset required ('noreboot' specified)
lspci shows (baremetal kernel, with said driver):
bash-4.1# lspci -s 05:00.0 -v
05:00.0 Ethernet controller: Intel Corporation Device 1533 (rev 03)
Subsystem: Super Micro Computer Inc Device 1533
Flags: bus master, fast devsel, latency 0, IRQ 19
Memory at f1900000 (32-bit, non-prefetchable) [size=512K]
I/O ports at c000 [size=32]
Memory at f1980000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Capabilities: [70] MSI-X: Enable+ Count=5 Masked-
Capabilities: [a0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 00-25-90-ff-ff-86-be-f1
Capabilities: [1a0] #17
Kernel driver in use: igb
aka, Intel I210
lspci shows (Xen, kernel does not have igb built-in):
-bash-4.1# lspci -s 05:00.0 -v
05:00.0 Ethernet controller: Intel Corporation Device 1533 (rev 03)
Subsystem: Super Micro Computer Inc Device 1533
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at f1900000 (32-bit, non-prefetchable) [size=512K]
I/O ports at c000 [size=32]
Memory at f1980000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Capabilities: [70] MSI-X: Enable- Count=5 Masked-
Capabilities: [a0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 00-25-90-ff-ff-86-be-f1
Capabilities: [1a0] #17
And with -xxx:
bash-4.1# lspci -s 05:00.0 -xxx
05:00.0 Ethernet controller: Intel Corporation Device 1533 (rev 03)
00: 86 80 33 15 07 00 10 00 03 00 00 02 10 00 00 00
10: 00 00 90 f1 00 00 00 00 01 c0 00 00 00 00 98 f1
20: 00 00 00 00 00 00 00 00 00 00 00 00 d9 15 33 15
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00
40: 01 50 23 c8 08 20 00 00 00 00 00 00 00 00 00 00
50: 05 70 80 01 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 11 a0 04 00 03 00 00 00 03 20 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff
a0: 10 00 02 00 c2 8c 00 10 07 28 19 00 11 5c 42 00
b0: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 1f 00 00 00 00 00 00 00 00 00 00 00
d0: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Which would imply that we should start with '50' offset, not
'60'!
If I boot baremetal with 'pci=earlydump' I get:
[ 0.000000] pci 0000:05:00.0 config space:
[ 0.000000] 00: e3 10 13 81 07 00 10 00 01 01 04 06 00 00 01 00
[ 0.000000] 10: 00 00 00 00 00 00 00 00 05 06 07 20 f1 01 a0 22
[ 0.000000] 20: 50 f1 60 f1 f1 ff 01 00 00 00 00 00 00 00 00 00
[ 0.000000] 30: ff 00 00 00 60 00 00 00 00 00 00 00 ff 00 10 00
[ 0.000000] 40: 00 aa 00 00 00 19 90 7d 80 01 00 00 07 03 00 00
[ 0.000000] 50: 68 89 09 80 00 1f 00 00 00 01 00 00 00 00 00 00
[ 0.000000] 60: 0d a0 00 00 d9 15 05 08 00 00 00 00 00 00 00 00
[ 0.000000] 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 0.000000] 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 0.000000] 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 0.000000] a0: 01 00 03 f8 08 00 00 00 00 00 00 00 00 00 00 00
[ 0.000000] b0: 00 00 00 00 40 00 00 00 00 00 00 00 ef fb be 07
[ 0.000000] c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Which does indeed show that at bootup the PCI configuration
space is different.
<blink>And the driver id does not match!
If I look at one that has it:
[ 0.000000] pci 0000:04:00.0 config space:
[ 0.000000] 00: 86 80 33 15 07 00 10 00 03 00 00 02 10 00 00 00
[ 0.000000] 10: 00 00 90 f1 00 00 00 00 01 c0 00 00 00 00 98 f1
[ 0.000000] 20: 00 00 00 00 00 00 00 00 00 00 00 00 d9 15 33 15
[ 0.000000] 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00
[ 0.000000] 40: 01 50 23 c8 08 20 00 00 00 00 00 00 00 00 00 00
[ 0.000000] 50: 05 70 80 01 00 00 00 00 00 00 00 00 00 00 00 00
[ 0.000000] 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 0.000000] 70: 11 a0 04 00 03 00 00 00 03 20 00 00 00 00 00 00
[ 0.000000] 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 0.000000] 90: 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff
[ 0.000000] a0: 10 00 02 00 c2 8c 00 10 07 28 19 00 11 5c 42 00
[ 0.000000] b0: 42 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
[ 0.000000] c0: 00 00 00 00 1f 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
That matches more of the reality and 04:00.0 is actually 05:00.0.
The reason that is happening is probably because of:
-bash-4.1# cat /proc/cmdline
initrd=initramfs.cpio.gz console=ttyS0,115200 kgdboc=ttyS0 pci=assign-busses pci=earlydump BOOT_IMAGE=vmlinuz
-bash-4.1#
The 'assign-busses' which is needed for SR-IOV to work.
If don't use that paremeter Linux kernel (baremetal and with Xen)
tells me:
-bash-4.1# cat /sys/devices/pci0000:00/0000:00:01.1/0000:02:00.0/sriov_numvfs
0
-bash-4.1# cat /sys/devices/pci0000:00/0000:00:01.1/0000:02:00.0/sriov_totalvfs
7
-bash-4.1# echo 7 > /sys/devices/pci0000:00/0000:00:01.1/0000:02:00.0/sriov_numvfs
-bash: echo: write error: Cannot allocate memory
-bash-4.1# dmesg | tail
[ 241.874349] random: sshd urandom read with 63 bits of entropy available
[ 242.918267] Loading iSCSI transport class v2.0-870.
[ 242.926046] iscsi: registered transport (tcp)
[ 244.689798] scsi8 : iSCSI Initiator over TCP/IP
[ 244.709799] connection1:0: detected conn error (1020)
[ 244.969450] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 244.980434] device-mapper: multipath: version 1.6.0 loaded
[ 250.027291] random: nonblocking pool is initialized
[ 256.282312] switch: port 1(eth0) entered forwarding state
[ 365.468641] igb 0000:02:00.0: SR-IOV: bus number out of range
And sure enough if I boot Xen without 'pci=assign-busses' it works just
fine.
Ugh.
I wonder how Xen 4.3 would actually do the PCI passthrough - it booted with
the 'assign-busses' - but I hadn't tried to do PCI passthrough of the
PF device (the I210).
If do pass in '05:00.0' (new bus number) I wonder if it will use IOMMU context
with whatever '05:00.0' was _before_ the bus re-assigment aka:
05:00.0 PCI bridge: Tundra Semiconductor Corp. Device 8113 (rev 01) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=05, secondary=06, subordinate=07, sec-latency=32
Memory behind bridge: f1500000-f16fffff
Capabilities: [60] Subsystem: Super Micro Computer Inc Device 0805
Capabilities: [a0] Power Management version 3
Which I think would confuse Xen as this is clearly labeled as bridge
not a PCI device.
The reason for me using 'pci=assign-busses' is that it looks to be
the only option to use SR-IOV.
Which I suppose makes sense as it tries to create VFs right after its own bus id:
+-01.1-[02-03]--+-[0000:03]-+-10.0 Intel Corporation 82576 Virtual Function
| | +-10.1 Intel Corporation 82576 Virtual Function
| | +-10.2 Intel Corporation 82576 Virtual Function
| | +-10.3 Intel Corporation 82576 Virtual Function
| | +-10.4 Intel Corporation 82576 Virtual Function
| | +-10.5 Intel Corporation 82576 Virtual Function
| | +-10.6 Intel Corporation 82576 Virtual Function
| | +-10.7 Intel Corporation 82576 Virtual Function
| | +-11.0 Intel Corporation 82576 Virtual Function
| | +-11.1 Intel Corporation 82576 Virtual Function
| | +-11.2 Intel Corporation 82576 Virtual Function
| | +-11.3 Intel Corporation 82576 Virtual Function
| | +-11.4 Intel Corporation 82576 Virtual Function
| | \-11.5 Intel Corporation 82576 Virtual Function
| \-[0000:02]-+-00.0 Intel Corporation 82576 Gigabit Network Connection
| \-00.1 Intel Corporation 82576 Gigabit Network Connection
But why does it have to have the bus _right_ after its own? Can't it
use one at the end of the its bus-space? The bus is after it is occupied
by another card (if I boot without 'pci=assign-busses').
I do recall using this particular SR-IOV card on a different hardware
a year ago or so. And it did work. I think that might be because
there were no PCI cards _after_ the SR-IOV card.
For posterity, with pci=assign-busses under baremetal (with SR-IOV enabled):
02:00.0 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01)
02:00.1 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01)
03:10.0 Ethernet controller: Intel Corporation 82576 Virtual Function (rev 01)
03:10.1 Ethernet controller: Intel Corporation 82576 Virtual Function (rev 01)
03:10.2 Ethernet controller: Intel Corporation 82576 Virtual Function (rev 01)
03:10.3 Ethernet controller: Intel Corporation 82576 Virtual Function (rev 01)
03:10.4 Ethernet controller: Intel Corporation 82576 Virtual Function (rev 01)
03:10.5 Ethernet controller: Intel Corporation 82576 Virtual Function (rev 01)
03:10.6 Ethernet controller: Intel Corporation 82576 Virtual Function (rev 01)
03:10.7 Ethernet controller: Intel Corporation 82576 Virtual Function (rev 01)
03:11.0 Ethernet controller: Intel Corporation 82576 Virtual Function (rev 01)
03:11.1 Ethernet controller: Intel Corporation 82576 Virtual Function (rev 01)
03:11.2 Ethernet controller: Intel Corporation 82576 Virtual Function (rev 01)
03:11.3 Ethernet controller: Intel Corporation 82576 Virtual Function (rev 01)
03:11.4 Ethernet controller: Intel Corporation 82576 Virtual Function (rev 01)
03:11.5 Ethernet controller: Intel Corporation 82576 Virtual Function (rev 01)
04:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
04:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
05:00.0 Ethernet controller: Intel Corporation Device 1533 (rev 03)
06:00.0 PCI bridge: Tundra Semiconductor Corp. Device 8113 (rev 01)
07:01.0 PCI bridge: Hint Corp HB6 Universal PCI-PCI bridge (non-transparent mode) (rev 11)
07:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
08:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
08:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
08:09.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
08:09.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
08:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
08:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
08:0b.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
08:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
09:00.0 USB Controller: Renesas Technology Corp. Device 0015 (rev 02)
0a:00.0 SATA controller: Device 1b21:0612 (rev 01)
Without 'pci=assign-busses' under baremetal:
02:00.0 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01)
02:00.1 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01)
03:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
03:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
04:00.0 Ethernet controller: Intel Corporation Device 1533 (rev 03)
05:00.0 PCI bridge: Tundra Semiconductor Corp. Device 8113 (rev 01)
06:01.0 PCI bridge: Hint Corp HB6 Universal PCI-PCI bridge (non-transparent mode) (rev 11)
06:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
07:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
07:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
07:09.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
07:09.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
07:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
07:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
07:0b.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
07:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
08:00.0 USB Controller: Renesas Technology Corp. Device 0015 (rev 02)
09:00.0 SATA controller: Device 1b21:0612 (rev 01)
This problem with SR-IOV bus seems to have been solved in 2009:
commit a28724b0fb909d247229a70761c90bb37b13366a
Author: Yu Zhao <yu.zhao@intel.com>
Date: Fri Mar 20 11:25:13 2009 +0800
PCI: reserve bus range for SR-IOV device
Reserve the bus number range used by the Virtual Function when
pcibios_assign_all_busses() returns true.
And pcibios_assign_all_busses() is the one that returns true if 'pci=assign-busses'
is set.
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: tst035-jan-debug-2.txt --]
[-- Type: text/plain; charset=utf-8, Size: 160773 bytes --]
Trying 192.168.102.15...
Connected to maxsrv2.
Escape character is '^]'.
€\b \b^[[2J^[[1;1H^[[1;1H€\b \b^[[01;00H^[[0m^[[2;37;40mInitializing Intel(R) Boot Agent GE v1.3.22 ^[[02;00HPXE 2.1 Build 086 (WfM 2.0) ^[[03;00HPress Ctrl+S to enter the Setup Menu. ^[[04;00H ^[[05;00H ^[[06;00H ^[[07;00H ^[[08;00H ^[[09;00H ^[[10;00H ^[[11;00H ^[[12;00H ^[[13;00H ^[[14;00H ^[[15;00H ^[[16;00H ^[[17;00H ^[[18;00H ^[[19;00H ^[[20;00H ^[[21;00H ^[[22;00H ^[[23;00H ^[[24;00H ^[[24;00H^[[03;39H^[[03;00HPress Ctrl+S to enter the Setup Menu.. ^[[03;39H^[[03;39H^[[03;39H^[[03;39H^[[03;39H^[[03;39H^[[03;39H^[[03;39H^[[03;39H^[[03;39H^[[03;39H^[[03;39H€\b \b^[[2J^[[1;1H^[[1;1H€\b \b^[[01;00HInitializing Intel(R) Boot Agent GE v1.3.22 ^[[02;00HPXE 2.1 Build 086 (WfM 2.0) ^[[03;00H ^[[04;00H ^[[05;00HInitializing Intel(R) Boot Agent GE v1.3.22 ^[[06;00HPXE 2.1 Build 086 (WfM 2.0) ^[[07;00HPress Ctrl+S to enter the Setup Menu. ^[[08;00H ^[[09;00H ^[[10;00H ^[[11;00H ^[[12;00H ^[[13;00H ^[[14;00H ^[[15;00H ^[[16;00H ^[[17;00H ^[[18;00H ^[[19;00H ^[[20;00H ^[[21;00H ^[[22;00H ^[[23;00H ^[[24;00H ^[[24;00H^[[07;39H^[[07;00HPress Ctrl+S to enter the Setup Menu.. ^[[07;39H^[[07;39H^[[07;39H^[[07;39H^[[07;39H^[[07;39H^[[07;39H^[[07;39H^[[07;39H^[[07;39H^[[07;39H^[[07;39H€\b \b^[[2J^[[1;1H^[[1;1H€\b \b^[[01;00HInitializing Intel(R) Boot Agent GE v1.3.22 ^[[02;00HPXE 2.1 Build 086 (WfM 2.0) ^[[03;00H ^[[04;00H ^[[05;00HInitializing Intel(R) Boot Agent GE v1.3.22 ^[[06;00HPXE 2.1 Build 086 (WfM 2.0) ^[[07;00H ^[[08;00H ^[[09;00HInitializing Intel(R) Boot Agent GE v1.4.10 ^[[10;00HPXE 2.1 Build 092 (WfM 2.0) ^[[11;00HPress Ctrl+S to enter the Setup Menu. ^[[12;00H ^[[13;00H ^[[14;00H ^[[15;00H ^[[16;00H ^[[17;00H ^[[18;00H ^[[19;00H ^[[20;00H ^[[21;00H ^[[22;00H ^[[23;00H ^[[24;00H ^[[24;00H^[[11;39H^[[11;00HPress Ctrl+S to enter the Setup Menu.. ^[[11;39H^[[11;39H^[[11;39H^[[11;39H^[[11;39H^[[11;39H^[[11;39H^[[11;39H^[[11;39H^[[11;39H^[[11;39H^[[11;39H^[[11;39H€\b \b^[[2J^[[1;1H^[[1;1H€\b \b^[[01;00HInitializing Intel(R) Boot Agent GE v1.3.22 ^[[02;00HPXE 2.1 Build 086 (WfM 2.0) ^[[03;00H ^[[04;00H ^[[05;00HInitializing Intel(R) Boot Agent GE v1.3.22 ^[[06;00HPXE 2.1 Build 086 (WfM 2.0) ^[[07;00H ^[[08;00H ^[[09;00HInitializing Intel(R) Boot Agent GE v1.4.10 ^[[10;00HPXE 2.1 Build 092 (WfM 2.0) ^[[11;00H ^[[12;00H ^[[13;00HInitializing Intel(R) Boot Agent GE v1.4.10 ^[[14;00HPXE 2.1 Build 092 (WfM 2.0) ^[[15;00HPress Ctrl+S to enter the Setup Menu. ^[[16;00H ^[[17;00H ^[[18;00H ^[[19;00H ^[[20;00H ^[[21;00H ^[[22;00H ^[[23;00H ^[[24;00H ^[[24;00H^[[15;39H^[[15;00HPress Ctrl+S to enter the Setup Menu.. ^[[15;39H^[[15;39H^[[15;39H^[[15;39H^[[15;39H^[[15;39H^[[15;39H^[[15;39H^[[15;39H^[[15;39H^[[15;39H^[[15;39H^[[15;39H^[[15;39H^[[15;39H^[[15;39H€\b \b^[[2J^[[1;1H^[[1;1H€\b \b^[[01;00HInitializing Intel(R) Boot Agent GE v1.3.22 ^[[02;00HPXE 2.1 Build 086 (WfM 2.0) ^[[03;00H ^[[04;00H ^[[05;00HInitializing Intel(R) Boot Agent GE v1.3.22 ^[[06;00HPXE 2.1 Build 086 (WfM 2.0) ^[[07;00H ^[[08;00H ^[[09;00HInitializing Intel(R) Boot Agent GE v1.4.10 ^[[10;00HPXE 2.1 Build 092 (WfM 2.0) ^[[11;00H ^[[12;00H ^[[13;00HInitializing Intel(R) Boot Agent GE v1.4.10 ^[[14;00HPXE 2.1 Build 092 (WfM 2.0) ^[[15;00H ^[[16;00H ^[[17;00HInitializing Intel(R) Boot Agent GE v1.4.10 ^[[18;00HPXE 2.1 Build 092 (WfM 2.0) ^[[19;00HPress Ctrl+S to enter the Setup Menu. ^[[20;00H ^[[21;00H ^[[22;00H ^[[23;00H ^[[24;00H ^[[24;00H^[[19;39H^[[19;00HPress Ctrl+S to enter the Setup Menu.. ^[[19;39H^[[19;39H^[[19;39H^[[19;39H^[[19;39H^[[19;39H^[[19;39H^[[19;39H^[[19;39H^[[19;39H^[[19;39H^[[19;39H^[[19;39H^[[19;39H^[[19;39H^[[19;39H€\b \b^[[2J^[[1;1H^[[1;1H€\b \b^[[01;00H €\b \b^[[2J^[[1;1H^[[1;1H^[[2J^[[1;1H^[[2J^[[1;1H€\b \b^[[01;00H ^[[02;00HIntel(R) Boot Agent GE v1.4.10 ^[[03;00HCopyright (C) 1997-2012, Intel Corporation ^[[04;00H ^[[05;00HInitializing and establishing link... ^[[06;00H ^[[07;00H ^[[08;00H ^[[09;00H ^[[10;00H ^[[11;00H ^[[12;00H ^[[13;00H ^[[14;00H ^[[15;00H ^[[16;00H ^[[17;00H ^[[18;00H ^[[19;00H ^[[20;00H ^[[21;00H ^[[22;00H ^[[23;00H ^[[24;00H ^[[24;00H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;38H^[[05;00HCLIENT MAC ADDR: 00 25 90 86 BE F0 GUID: 00000000 0000 0000 0000 00259086BEF0 ^[[06;00HDHCP.| ^[[06;06H^[[06;00HDHCP./ ^[[06;06H^[[06;00HDHCP.- ^[[06;06H^[[06;00HDHCP.\ ^[[06;06H^[[06;00HDHCP.| ^[[06;06H^[[06;00HDHCP./ ^[[06;06H^[[06;00HDHCP.- ^[[06;06H^[[06;00HDHCP.\ ^[[06;06H^[[06;00HDHCP.| ^[[06;06H^[[06;00HDHCP./ ^[[06;06H^[[06;00HDHCP.- ^[[06;06H^[[06;00HDHCP.\ ^[[06;06H^[[06;00HDHCP.| ^[[06;06H^[[06;00HDHCP./ ^[[06;06H^[[06;00HDHCP.- ^[[06;06H^[[06;00HDHCP.\ ^[[06;06H^[[06;00HDHCP.| ^[[06;06H^[[06;00HDHCP./ ^[[06;06H^[[06;00HCLIENT IP: 192.168.102.35 MASK: 255.255.255.0 DHCP IP: 192.168.102.1
PXELINUX 3.82 2009-06-09 Copyright (C) 1994-2009 H. Peter Anvin et al
Loading xen.gz... ^[[07;00Hok
Loading vmlinuz... ^[[01;00Hok
Loading initramfs.cpio.gz... ^[[01;00H^[[01;00H^[[01;00H^[[01;00H^[[01;00H^[[01;00H^[[01;00H^[[01;00H^[[01;00H^[[01;00H^[[01;00H^[[01;00H^[[01;00H^[[01;00H^[[01;00H^[[01;00H^[[01;00H^[[01;00H^[[01;00H^[[01;00H^[[01;00H^[[01;00H^[[01;00H^[[01;00Hok
Loading microcode.bin... ok
Xen 4.4-rc2
(XEN) Xen version 4.4-rc2 (konrad@(none)) (gcc (GCC) 4.4.4 20100503 (Red Hat 4.4.4-2)) debug=y Fri Jan 24 14:40:10 EST 2014
(XEN) Latest ChangeSet: Mon Jan 20 09:50:20 2014 +0100 git:407a3c0-dirty
(XEN) Console output is synchronous.
(XEN) Bootloader: unknown
(XEN) Command line: dom0_max_vcpus=1 dom0_mem=max:2G iommu=debug,verbose com1=115200,8n1 console=com1 ucode=scan console_timestamps=1 console_to_ring conring_size=2097152 cpufreq=xen:performance,verbose sync_console noreboot loglvl=all guest_loglvl=all dom0_mem_max=max:6GB,2G
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 0000000000099c00 (usable)
(XEN) 0000000000099c00 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000a58f1000 (usable)
(XEN) 00000000a58f1000 - 00000000a58f8000 (ACPI NVS)
(XEN) 00000000a58f8000 - 00000000a61b1000 (usable)
(XEN) 00000000a61b1000 - 00000000a6597000 (reserved)
(XEN) 00000000a6597000 - 00000000b74b4000 (usable)
(XEN) 00000000b74b4000 - 00000000b76cb000 (reserved)
(XEN) 00000000b76cb000 - 00000000b770c000 (usable)
(XEN) 00000000b770c000 - 00000000b77b9000 (ACPI NVS)
(XEN) 00000000b77b9000 - 00000000b7fff000 (reserved)
(XEN) 00000000b7fff000 - 00000000b8000000 (usable)
(XEN) 00000000bc000000 - 00000000be200000 (reserved)
(XEN) 00000000f8000000 - 00000000fc000000 (reserved)
(XEN) 00000000fec00000 - 00000000fec01000 (reserved)
(XEN) 00000000fed00000 - 00000000fed04000 (reserved)
(XEN) 00000000fed1c000 - 00000000fed20000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000ff000000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 000000023fe00000 (usable)
(XEN) ACPI: RSDP 000F0490, 0024 (r2 ALASKA)
(XEN) ACPI: XSDT B7794098, 00AC (r1 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: FACP B779F0B8, 010C (r5 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: DSDT B77941D8, AEDD (r2 ALASKA A M I 0 INTL 20091112)
(XEN) ACPI: FACS B77B7080, 0040
(XEN) ACPI: APIC B779F1C8, 0092 (r3 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: FPDT B779F260, 0044 (r1 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: SSDT B779F2A8, 0540 (r1 PmRef Cpu0Ist 3000 INTL 20051117)
(XEN) ACPI: SSDT B779F7E8, 0AD8 (r1 PmRef CpuPm 3000 INTL 20051117)
(XEN) ACPI: SSDT B77A02C0, 02F2 (r1 PmRef Cpu0Tst 3000 INTL 20051117)
(XEN) ACPI: SSDT B77A05B8, 0348 (r1 PmRef ApTst 3000 INTL 20051117)
(XEN) ACPI: MCFG B77A0900, 003C (r1 ALASKA A M I 1072009 MSFT 97)
(XEN) ACPI: HPET B77A0940, 0038 (r1 ALASKA A M I 1072009 AMI. 5)
(XEN) ACPI: SSDT B77A0978, 036D (r1 SataRe SataTabl 1000 INTL 20091112)
(XEN) ACPI: SSDT B77A0CE8, 327D (r1 SaSsdt SaSsdt 3000 INTL 20091112)
(XEN) ACPI: ASF! B77A3F68, 00A5 (r32 INTEL HCG 1 TFSM F4240)
(XEN) ACPI: DMAR B77A4010, 00B8 (r1 INTEL HSW 1 INTL 1)
(XEN) ACPI: EINJ B77A40C8, 0130 (r1 AMI AMI EINJ 0 0)
(XEN) ACPI: ERST B77A41F8, 0230 (r1 AMIER AMI ERST 0 0)
(XEN) ACPI: HEST B77A4428, 00A8 (r1 AMI AMI HEST 0 0)
(XEN) ACPI: BERT B77A44D0, 0030 (r1 AMI AMI BERT 0 0)
(XEN) System RAM: 8046MB (8239752kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-000000023fe00000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fd870
(XEN) DMI 2.7 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x1808
(XEN) ACPI: v5 SLEEP INFO: control[0:0], status[0:0]
(XEN) ACPI: SLEEP INFO: pm1x_cnt[1804,0], pm1x_evt[1800,0]
(XEN) ACPI: 32/64X FACS address mismatch in FADT - b77b7080/0000000000000000, using 32
(XEN) ACPI: wakeup_vec[b77b708c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 7:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 7:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
(XEN) Processor #4 7:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
(XEN) Processor #6 7:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
(XEN) Processor #1 7:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
(XEN) Processor #3 7:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
(XEN) Processor #5 7:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
(XEN) Processor #7 7:12 APIC version 21
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000
(XEN) [VT-D]dmar.c:778: Host address width 39
(XEN) [VT-D]dmar.c:792: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:472: dmaru->address = fed90000
(XEN) [VT-D]iommu.c:1157: drhd->address = fed90000 iommu->reg = ffff82c000201000
(XEN) [VT-D]iommu.c:1159: cap = c0000020660462 ecap = f0101a
(XEN) [VT-D]dmar.c:383: endpoint: 0000:00:02.0
(XEN) [VT-D]dmar.c:792: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:472: dmaru->address = fed91000
(XEN) [VT-D]iommu.c:1157: drhd->address = fed91000 iommu->reg = ffff82c000203000
(XEN) [VT-D]iommu.c:1159: cap = d2008020660462 ecap = f010da
(XEN) [VT-D]dmar.c:397: IOAPIC: 0000:f0:1f.0
(XEN) [VT-D]dmar.c:361: MSI HPET: 0000:f0:0f.0
(XEN) [VT-D]dmar.c:486: flags: INCLUDE_ALL
(XEN) [VT-D]dmar.c:797: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:383: endpoint: 0000:00:1d.0
(XEN) [VT-D]dmar.c:383: endpoint: 0000:00:1a.0
(XEN) [VT-D]dmar.c:383: endpoint: 0000:00:14.0
(XEN) [VT-D]dmar.c:666: RMRR region: base_addr b764b000 end_address b7657fff
(XEN) [VT-D]dmar.c:797: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:383: endpoint: 0000:00:02.0
(XEN) [VT-D]dmar.c:666: RMRR region: base_addr bc000000 end_address be1fffff
(XEN) Xen ERST support is initialized.
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) SMP: Allowing 8 CPUs (0 hotplug CPUs)
(XEN) IRQ limits: 24 GSI, 1528 MSI/MSI-X
(XEN) Switched to APIC driver x2apic_cluster.
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 3400.107 MHz processor.
(XEN) Initing memory sharing.
(XEN) xstate_init: using cntxt_size: 0x340 and states: 0xlity: BCAST 1 SER 0 CMCI 1 firstbank 0 extended MCE MSR 0
(XEN) Intel machine check reporting enabled
(XEN) PCI: MCFG configuration 0: base f8000000 segment 0000 buses 00 - 3f
(XEN) PCI: MCFG area at f8000000 reserved in E820
(XEN) PCI: Using MCFG for segment 0000 bus 00-3f
(XEN) Intel VT-d iommu 0 supported page sizes: 4kB.
(XEN) Intel VT-d iommu 1 supported page sizes: 4kB.
(XEN) Intel VT-d Snoop Control not enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation enabled.
(XEN) Intel VT-d Interrupt Remapping enabled.
(XEN) Intel VT-d Shared EPT tables not enabled.
(XEN) 02:00.0: alloced (179)
(XEN) 02:00.0: alloced (189) ffff830239467f70,pdev ffff8302394660d0
(XEN) 02:00.1: alloced (179)
(XEN) 02:00.1: alloced (189) ffff830239466250,pdev ffff830239466190
(XEN) 04:00.0: alloced (179)
(XEN) 04:00.0: alloced (189) ffff830239466520,pdev ffff830239466460
(XEN) 05:00.0: status=0010 (alloc_pdev+0xb7/0x360 wants 11)
(XEN) 05:00.0: pos=60
(XEN) 05:00.0: id=0d
(XEN) 05:00.0: pos=a0
(XEN) 05:00.0: id=01
(XEN) 05:00.0: pos=00
(XEN) 05:00.0: no cap 11
(XEN) 08:00.0: alloced (179)
(XEN) 08:00.0: alloced (189) ffff830239466eb0,pdev ffff830239466df0
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Interrupt remapping enabled
(XEN) Enabled directed EOI wit(XEN) TSC deadline timer enabled
(XEN) [2014-01-25 03:41:53] Platform timer is 14.318MHz HPET
(XEN) [2014-01-25 03:41:53] Allocated console ring of 1048576 KiB.
(XEN) [2014-01-25 03:41:53] mwait-idle: MWAIT substates: 0x42120
(XEN) [2014-01-25 03:41:53] mwait-idle: v0.4 model 0x3c
(XEN) [2014-01-25 03:41:53] mwait-idle: lapic_timer_reliable_states 0xffffffff
(XEN) [2014-01-25 03:41:53] VMX: Supported advanced features:
(XEN) [2014-01-25 03:41:53] - APIC MMIO access virtualisation
(XEN) [2014-01-25 03:41:53] - APIC TPR shadow
(XEN) [2014-01-25 03:41:53] - Extended Page Tables (EPT)
(XEN) [2014-01-25 03:41:53] - Virtual-Processor Identifiers (VPID)
(XEN) [2014-01-25 03:41:53] - Virtual NMI
(XEN) [2014-01-25 03:41:53] - MSR direct-access bitmap
(XEN) [2014-01-25 03:41:53] - Unrestricted Guest
(XEN) [2014-01-25 03:41:53] - VMCS shadowing
(XEN) [2014-01-25 03:41:53] HVM: ASIDs enabled.
(XEN) [2014-01-25 03:41:53] HVM: VMX enabled
(XEN) [2014-01-25 03:41:53] HVM: Hardware Assisted Paging (HAP) detected
(XEN) [2014-01-25 03:41:53] HVM: HAP page sizes: 4kB, 2MB, 1GB
(XEN) [2014-01-25 03:41:53] Brought up 8 CPUs
(XEN) [2014-01-25 03:41:53] ACPI sleep modes: S3
(XEN) [2014-01-25 03:41:53] mcheck_poll: Machine check polling timer started.*** LOADING DOMAIN 0 ***
(XEN) [2014-01-25 03:41:53] elf_parse_binary: phdr: paddr=0x1000000 memsz=0xa28000
(XEN) [2014-01-25 03:41:53] elf_parse_binarymemory: 0x1000000 -> 0x23f7000
(XEN) [2014-01-25 03:41:53] elf_xen_parse_note: GUEST_OS = "linux"
(XEN) [2014-01-25 03:41:53] elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) [2014-01-25 03:41:53] elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) [2014-01-25 03:41:53] elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) [2014-01-25 03:41:53] elf_xen_parse_note: ENTRY = 0xffffffff81cd81e0
(XEN) [2014-01-25 03:41:53] elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81001000
(XEN) [2014-01-25 03:41:53] elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb"
(XEN) [2014-01-25 03:41:53] elf_xen_parse_note: PAE_MODE = "yes"
(XEN) [2014-01-25 03:41:53] elf_xen_parse_note: LOADER = "generic"
(XEN) [2014-01-25 03:41:53] elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) [2014-01-25 03:41:53] elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) [2014-01-25 03:41:53] elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
(XEN) [2014-01-25 03:41:53] elf_xen_parse_note: PADDR_OFFSET = 0x0
(XEN) [2014-01-25 03:41:53] elf_xen_addr_calc_check: addresses:
(XEN) [2014-01-25 03:41:53] virt_base = 0xffffffff80000000
(XEN) [2014-01-25 03:41:53] elf_paddr_offset = 0x0
(XEN) [2014-01-25 03:41:53] virt_offset = 0xffffffff80000000
(XEN) [2014-01-25 03:41:53] virt_kstart = 0xffffffff81000000
(XEN) [2014-01-25 03:41:53] virt_kend = 0xffffffff823f7000
(XEN) [2014-01-25 03:41:53] virt_entry = 0xffffffff81cd81e0
(XEN) [2014-01-25 03:41:53] p2m_base = 0xffffffffffffffff
(XEN) [2014-01-25 03:41:53] Xen kernel: 64-bit, lsb, compat32
(XEN) [2014-01-25 03:41:53] Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x23f7000
(XEN) [2014-01-25 03:41:53] PHYSICAL MEMORY ARRANGEMENT:
(XEN) [2014-01-25 03:41:53] Dom0 alloc.: 000000022c000000->0000000230000000 (487082 pages to be allocated)
(XEN) [2014-01-25 03:41:53] Init. ramdisk: 000000023ac31000->000000023fd86dfa
(XEN) [2014-01-25 03:41:53] VIRTUAL MEMORY ARRANGEMENT:
(XEN) [2014-01-25 03:41:53] Loaded kernel: ffffffff81000000->ffffffff823f7000
(XEN) [2014-01-25 03:41:53] Init. ramdisk: ffffffff823f7000->ffffffff8754cdfa
(XEN) [2014-01-25 03:41:53] Phys-Mach map: ffffffff8754d000->ffffffff8794d000
(XEN) [2014-01-25 03:41:53] Start info: ffffffff8794d000->ffffffff8794d4b4
(XEN) [2014-01-25 03:41:53] Page tables: ffffffff8794e000->ffffffff8798f000
(XEN) [2014-01-25 03:41:54] Boot stack: ffffffff8798f000->ffffffff87990000
(XEN) [2014-01-25 03:41:54] TOTAL: ffffffff80000000->ffffffff87c00000
(XEN) [2014-01-25 03:41:54] ENTRY ADDRESS: ffffffff81cd81e0
(XEN) [2014-01-25 03:41:54] Dom0 has maximum 1 VCPUs
(XEN) [2014-01-25 03:41:54] elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff81a28000
(XEN) [2014-01-25 03:41:54] elf_load_binary: phdr 1 at 0xffffffff81c00000 -> 0xffffffff81cc20f0
(XEN) [2014-01-25 03:41:54] elf_load_binary: phdr 2 at 0xffffffff81cc3000 -> 0xffffffff81cd7d80
(XEN) [2014-01-25 03:41:54] elf_load_binary: phdr 3 at 0xffffffff81cd8000 -> 0xffffffff81e7b000
(XEN) [2014-01-25 03:41:54] [VT-D]iommu.c:1438: d0:Hostbridge: skip 0000:00:00.0 map
(XEN) [2014-01-25 03:41:54] [VT-D]iommu.c:PCI: map 0000:00:16.0
(XEN) [2014-01-25 03:41:54] [VT-D]iommu.c:1464: d0:PCI: map 0000:00:19.0
(XEN) [2014-01-25 03:41:54] [VT-D]iommu.c:1464: d0:PCI: map 0000:00:1a.0
(XEN) [2014-01-25 03:41:54] [VT-D]iommu.c:1452: d0:PCIe: map 0000:00:1b.0
(XEN) [2014-01-25 03:41:54] [VT-D]iommu.c:1464: d0:PCI: map 0000:00:1d.0
(XEN) [2014-01-25 03:41:54] [VT-D]iommu.c:1464: d0:PCI: map 0000:00:1f.0
(XEN) [2014-01-25 03:41:54] [VT-D]iommu.c:1464: d0:PCI: map 0000:00:1f.2
(XEN) [2014-01-25 03:41:54] [VT-D]iommu.c:1464: d0:PCI: map 0000:00:1f.3
(XEN) [2014-01-25 03:41:54] [VT-D]iommu.c:1464: d0:PCI: map 0000:00:1f.6
(XEN) [2014-01-25 03:41:54] [VT-D]iommu.c:1452: d0:PCIe: map 0000:02:00.0
(XEN) [2014-01-25 03:41:54] [VT-D]iommu.c:1452: d0:PCIe: map 0000:02:00.1
(XEN) [2014-01-25 03:41:54] [VT-D]iommu.c:1452: d0:PCIe: map 0000:03:00.0
(XEN) [2014-01-25 03:41:54] [VT-D]iommu.c:1452: d0:PCIe: map 0000:03:00.1
(XEN) [2014-01-25 03:41:54] [VT-D]iommu.c:1452: d0:PCIe: map 0000:04:00.0
(XEN) [2014-01-25 03:41:54] [VT-D]iommu.c:1464: d0:PCI: map 0000:06:03.0
(XEN) [2014-01-25 03:41:54] [VT-D]iommu.c:1464: d0:PCI: map 0000:07:08.0
(XEN) [2014-01-25 03:41:54] [VT-D]iommu.c:1464: d0:PCI: map 0000:07:08.1
(XEN) [2014-01-25 03:41:54] [VT-D]iommu.c:1464: d0:PCI: map 0000:07:09.0
(XEN) [2014-01-25 03:41:54] [VT-D]iommu.c:1464: d0:PCI: map 0000:07:09.1
(XEN) [2014-01-25 03:41:54] [VT-D]iommu.c:1464: d0:PCI: map 0000:07:0a.0
(XEN) [2014-01-25 03:41:54] [VT-D]iommu.c:1464: d0:PCI: map 0000:07:0a.1
(XEN) [2014-01-25 03:41:55] [VT-D]iommu.c:1464: d0:PCI: map 0000:07:0b.0
(XEN) [2014-01-25 03:41:55] [VT-D]iommu.c:1464: d0:PCI: map 0000:07:0b.1
(XEN) [2014-01-25 03:41:55] [VT-D]iommu.c:1452: d0:PCIe: map 0000:08:00.0
(XEN) [2014-01-25 03:41:55] [VT-D]iommu.c:1452: d0:PCIe: map 0000:09:00.0
(XEN) [2014-01-25 03:41:55] [VT-D]iommu.c:750: iommu_enable_translation: iommu->reg = ffff82c000201000
(XEN) [2014-01-25 03:41:..............................................done.
(XEN) [2014-01-25 03:41:55] Initial low memory virq threshold set at 0x4000 pages.
(XEN) [2014-01-25 03:41:55] Std. Loglevel: All
(XEN) [2014-01-25 03:41:55] Guest Loglevel: All
(XEN) [2014-01-25 03:41:55] **********************************************
(XEN) [2014-01-25 03:41:55] ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS
(XEN) [2014-01-25 03:41:55] ******* This option is intended to aid debugging of Xen by ensuring
(XEN) [2014-01-25 03:41:55] ******* that all output is synchronously delivered on the serial line.
(XEN) [2014-01-25 03:41:55] ******* However it can introduce SIGNIFICANT latencies and affect
(XEN) [2014-01-25 03:41:55] ******* timekeeping. It is NOT recommended for production use!
(XEN) [2014-01-25 03:41:55] **********************************************
(XEN) [2014-01-25 03:41:55] 3... 2... 1...
(XEN) [2014-01-25 03:41:58] *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) [2014-01-25 03:et started...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing c.0upstream-03477-gdf32e43 (konrad@build-external.dumpdata.com) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC) ) #5 SMP Fri Jan 24 12:22:52 EST 2014
[ 0.000000] Command line: debug pci=assign-busses console=hvc0 loglevel=10 initcall_debug loop.max_loop=100 xen-pcibackAA.hide=(05:00.*) kgdboc=hvc0
[ 0.000000] Freeing 99-100 pfn range: 103 pages freed
[ 0.000000] 1-1 mapping on 99->100
[ 0.000000] 1-1 mapping on a58f1->a58f8
[ 0.000000] 1-1 mapping on a61b1->a6597
[ 0.000000] 1-1 mapping on b74b4->b76cb
[ 0.000000] 1-1 mapping on b770c->b7fff
[ 0.000000] 1-1 mapping on b8000->100000
[ 0.000000] Released 103 pages of unused memory
[ 0.000000] Set 298846 page(s) to 1-1 mapping
[ 0.000000] Populating 80000-80067 pfn range: 103 pages added
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000098fff] usable
[ 0.000000] Xen: [mem 0x0000000000099c00-0x00000000000fffff] reserved
[ 0.000000] Xen: [mem 0x0000000000100000-0x0000000080066fff] usable
[ 0.000000] Xen: [mem 0x0000000080067000-0x00000000a58f0fff] unusable
[ 0.000000] Xen: [mem 0x00000000a58f1000-0x00000000a58f7fff] ACPI NVS
[ 0.000000] Xen: [mem 0x00000000a58f8000-0x00000000a61b0fff] unusable
[ 0.000000] Xen: [mem 0x00000000a61b1000-0x00000000a6596fff] reserved
[ 0.000000] Xen: [mem 0x00000000a6597000-0x00000000b74b3fff] unusable
[ 0.000000] Xen: [mem 0x00000000b74b4000-0x00000000b76cafff] reserved
[ 0.000000] Xen: [mem 0x00000000b76cb000-0x00000000b770bfff] unusable
[ 0.000000] Xen: [mem 0x00000000b770c000-0x00000000b77b8fff] ACPI NVS
[ 0.000000] Xen: [mem 0x00000000b77b9000-0x00000000b7ffefff] reserved
[ 0.000000] Xen: [mem 0x00000000b7fff000-0x00000000b7ffffff] unusable
[ 0.000000] Xen: [mem 0x00000000bc000000-0x00000000be1fffff] reserved
[ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] Xen: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] Xen: [mem 0x0000000100000000-0x000000023fdfffff] unusable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Supermicro X10SAE/X10SAE, BIOS 1.00 05/03/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x80067 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000093000] 93000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x7fe00000-0x7fffffff]
[ 0.000000] [mem 0x7fe00000-0x7fffffff] page 4k
[ 0.000000] BRK [0x01fef000, 0x01feffff] PGTABLE
[ 0.000000] BRK [0x01ff0000, 0x01ff0fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7fdfffff]
[ 0.000000] [mem 0x7c000000-0x7fdfffff] page 4k
[ 0.000000] BRK [0x01ff1000, 0x01ff1fff] PGTABLE
[ 0.000000] BRK [0x01ff2000, 0x01ff2fff] PGTABLE
[ 0.000000] BRK [0x01ff3000, 0x01ff3fff] PGTABLE
[ 0.000000] BRK [0x01ff4000, 0x01ff4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
[ 0.000000] [mem 0x00100000-0x7bffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x80000000-0x80066fff]
[ 0.000000] [mem 0x80000000-0x80066fff] page 4k
[ 0.000000] RAMDISK: [mem 0x023f7000-0x0754cfff]
[ 0.000000] ACPI: RSDP 00000000000f0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000b7794098 0000AC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000b779f0b8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000b77941d8 00AEDD (v02 ALASKA A M I 00000000 INTL 20091112)
[ 0.000000] ACPI: FACS 00000000b77b7080 000040
[ 0.000000] ACPI: APIC 00000000b779f1c8 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000b779f260 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000b779f2a8 000540 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000b779f7e8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000b77a02c0 0002F2 (v01 PmRef Cpu0Tst 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000b77a05b8 000348 (v01 PmRef ApTst 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 00000000b77a0900 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000b77a0940 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000b77a0978 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000b77a0ce8 00327D (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: ASF! 00000000b77a3f68 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: XMAR 00000000b77a4010 0000B8 (v01 INTEL HSW 00000001 INTL 00000001)
[ 0.000000] ACPI: EINJ 00000000b77a40c8 000130 (v01 AMI AMI EINJ 00000000 00000000)
[ 0.000000] ACPI: ERST 00000000b77a41f8 000230 (v01 AMIER AMI ERST 00000000 00000000)
[ 0.000000] ACPI: HEST 00000000b77a4428 0000A8 (v01 AMI AMI HEST 00000000 00000000)
[ 0.000000] ACPI: BERT 00000000b77a44d0 000030 (v01 AMI AMI BERT 00000000 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] NUMA turned off
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000080066fff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x80066fff]
[ 0.000000] NODE_DATA [mem 0x80063000-0x80066fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00098fff]
[ 0.000000] node 0: [mem 0x00100000-0x80066fff]
[ 0.000000] On node 0 totalpages: 524287
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3992 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7114 pages used for memmap
[ 0.000000] DMA32 zone: 520295 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x00099000-0x00099fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x000fffff]
[ 0.000000] e820: [mem 0xbe200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.4-rc2 (preserve-AD)
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007f600000 s85376 r8192 d21120 u262144
[ 0.000000] pcpu-alloc: s85376 r8192 d21120 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 5.511514] Built 1 zonelists in Node order, mobility grouping on. Total pages: 517096
[ 5.511515] Policy zone: DMA32
[ 5.511516] Kernel command line: debug pci=assign-busses console=hvc0 loglevel=10 initcall_debug loop.max_loop=100 xen-pcibackAA.hide=(05:00.*) kgdboc=hvc0
[ 5.511829] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 5.511858] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 5.532322] software IO TLB [mem 0x79200000-0x7d200000] (64MB) mapped at [ffff880079200000-ffff88007d1fffff]
[ 5.535407] Memory: 1891592K/2097148K available (7058K kernel code, 773K rwdata, 2208K rodata, 1724K init, 1380K bss, 205556K reserved)
[ 5.535637] Hierarchical RCU implementation.
[ 5.535638] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
[ 5.535638] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 5.535646] NR_IRQS:33024 nr_irqs:256 16
[ 5.535725] xen: sci override: global_irq=9 trigger=0 polarity=0
[ 5.535727] xen: registering gsi 9 triggering 0 polarity 0
[ 5.535738] xen: --> pirq=9 -> irq=9 (gsi=9)
[ 5.535760] xen: acpi sci 9
[ 5.535763] xen: --> pirq=1 -> irq=1 (gsi=1)
[ 5.535766] xen: --> pirq=2 -> irq=2 (gsi=2)
[ 5.535769] xen: --> pirq=3 -> irq=3 (gsi=3)
[ 5.535771] xen: --> pirq=4 -> irq=4 (gsi=4)
[ 5.535774] xen: --> pirq=5 -> irq=5 (gsi=5)
[ 5.535776] xen: --> pirq=6 -> irq=6 (gsi=6)
[ 5.535779] xen: --> pirq=7 -> irq=7 (gsi=7)
[ 5.535781] xen: --> pirq=8 -> irq=8 (gsi=8)
[ 5.535784] xen: --> pirq=10 -> irq=10 (gsi=10)
[ 5.535786] xen: --> pirq=11 -> irq=11 (gsi=11)
[ 5.535789] xen: --> pirq=12 -> irq=12 (gsi=12)
[ 5.535791] xen: --> pirq=13 -> irq=13 (gsi=13)
[ 5.535794] xen: --> pirq=14 -> irq=14 (gsi=14)
[ 5.535796] xen: --> pirq=15 -> irq=15 (gsi=15)
[ 5.537360] Console: colour VGA+ 80x25
[ 6.488462] console [hvc0] enabled
[ 6.492388] Xen: using vcpuop timer interface
[ 6.496738] installing Xen timer for CPU 0
[ 6.500919] tsc: Detected 3400.106 MHz processor
[ 6.505603] Calibrating delay loop (skipped), value calculated using timer frequency.. 6800.21 BogoMIPS (lpj=3400106)
[ 6.516237] pid_max: default: 32768 minimum: 301
[ 6.521075] Security Framework initialized
[ 6.525165] SELinux: Initializing.
[ 6.528738] SELinux: Starting in permissive mode
[ 6.533811] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 6.541261] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 6.548425] Mount-cache hash table entries: 256
[ 6.553402] Initializing cgroup subsys freezer
[ 6.557907] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 6.557907] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 6.571011] CPU: Physical Processor ID: 0
[ 6.575083] CPU: Processor Core ID: 0
[ 6.579504] mce: CPU supports 2 MCE banks
[ 6.583517] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 6.583517] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 6.583517] tlb_flushall_shift: 6
[ 6.620866] Freeing SMP alternatives memory: 32K (ffffffff81e72000 - ffffffff81e7a000)
[ 6.629543] ACPI: Core revision 2115
[ 6.686527] ACPI: All ACPI Tables successfully acquired
[ 6.693282] cpu 0 spinlock event irq 41
[ 6.697164] calling xen_init_spinlocks_jump+0x0/0x1d @ 1
[ 6.708165] initcall xen_init_spinlocks_jump+0x0/0x1d returned 0 after 4882 usecs
[ 6.715635] calling set_real_mode_permissions+0x0/0xa9 @ 1
[ 6.721275] initcall set_real_mode_permissions+0x0/0xa9 returned 0 after 0 usecs
[ 6.728720] calling trace_init_perf_perm_irq_work_exit+0x0/0x13 @ 1
[ 6.735133] initcall trace_init_perf_perm_irq_work_exit+0x0/0x13 returned 0 after 0 usecs
[ 6.743366] calling trace_init_flags_sys_exit+0x0/0x12 @ 1
[ 6.749000] initcall trace_init_flags_sys_exit+0x0/0x12 returned 0 after 0 usecs
[ 6.756452] calling trace_init_flags_sys_enter+0x0/0x12 @ 1
[ 6.762173] initcall trace_init_flags_sys_enter+0x0/0x12 returned 0 after 0 usecs
[ 6.769711] calling init_hw_perf_events+0x0/0x53b @ 1
[ 6.774912] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only.
[ 6.783784] initcall init_hw_perf_events+0x0/0x53b returned 0 after 2929 usecs
[ 6.791064] calling register_trigger_all_cpu_backtrace+0x0/0x16 @ 1
[ 6.797477] initcall register_trigger_all_cpu_backtrace+0x0/0x16 returned 0 after 0 usecs
[ 6.805709] calling kvm_spinlock_init_jump+0x0/0x5a @ 1
[ 6.811180] initcall kvm_spinlock_init_jump+0x0/0x5a returned 0 after 0 usecs
[ 6.818303] calling spawn_ksoftirqd+0x0/0x28 @ 1
[ 6.823096] initcall spawn_ksoftirqd+0x0/0x28 returned 0 after 0 usecs
[ 6.829657] calling init_workqueues+0x0/0x59a @ 1
[ 6.834667] initcall init_workqueues+0x0/0x59a returned 0 after 0 usecs
[ 6.841270] calling migration_init+0x0/0x72 @ 1
[ 6.845949] initcall migration_init+0x0/0x72 returned 0 after 0 usecs
[ 6.852448] calling check_cpu_stall_init+0x0/0x1b @ 1
[ 6.857649] initcall check_cpu_stall_init+0x0/0x1b returned 0 after 0 usecs
[ 6.864668] calling rcu_scheduler_really_started+0x0/0x12 @ 1
[ 6.870560] initcall rcu_scheduler_really_started+0x0/0x12 returned 0 after 0 usecs
[ 6.878274] calling rcu_spawn_gp_kthread+0x0/0x90 @ 1
[ 6.883512] initcall rcu_spawn_gp_kthread+0x0/0x90 returned 0 after 0 usecs
[ 6.890497] calling cpu_stop_init+0x0/0x76 @ 1
[ 6.895111] initcall cpu_stop_init+0x0/0x76 returned 0 after 0 usecs
[ 6.901500] calling relay_init+0x0/0x14 @ 1
[ 6.905833] initcall relay_init+0x0/0x14 returned 0 after 0 usecs
[ 6.911986] calling tracer_alloc_buffers+0x0/0x1bd @ 1
[ 6.917293] initcall tracer_alloc_buffers+0x0/0x1bd returned 0 after 0 usecs
[ 6.924378] calling init_events+0x0/0x61 @ 1
[ 6.928800] initcall init_events+0x0/0x61 returned 0 after 0 usecs
[ 6.935038] calling init_trace_printk+0x0/0x12 @ 1
[ 6.939979] initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs
[ 6.946738] calling event_trace_memsetup+0x0/0x52 @ 1
[ 6.951958] initcall event_trace_memsetup+0x0/0x52 returned 0 after 0 usecs
[ 6.958957] calling jump_label_init_module+0x0/0x12 @ 1
[ 6.964331] initcall jump_label_init_module+0x0/0x12 returned 0 after 0 usecs
[ 6.971525] calling balloon_clear+0x0/0x4f @ 1
[ 6.976118] initcall balloon_clear+0x0/0x4f returned 0 after 0 usecs
[ 6.982531] calling rand_initialize+0x0/0x30 @ 1
[ 6.987319] initcall rand_initialize+0x0/0x30 returned 0 after 0 usecs
[ 6.993884] calling mce_amd_init+0x0/0x165 @ 1
[ 6.998476] initcall mce_amd_init+0x0/0x165 returned 0 after 0 usecs
[ 7.004915] x86: Booted up 1 node, 1 CPUs
[ 7.009659] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 7.016304] devtmpfs: initialized
[ 7.022209] calling ipc_ns_init+0x0/0x14 @ 1
[ 7.026557] initcall ipc_ns_init+0x0/0x14 returned 0 after 0 usecs
[ 7.032797] calling init_mmap_min_addr+0x0/0x26 @ 1
[ 7.037822] initcall init_mmap_min_addr+0x0/0x26 returned 0 after 0 usecs
[ 7.044668] calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1
[ 7.051343] initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs
[ 7.059835] calling net_ns_init+0x0/0x104 @ 1
[ 7.064400] initcall net_ns_init+0x0/0x104 returned 0 after 0 usecs
[ 7.070683] calling e820_mark_nvs_memory+0x0/0x41 @ 1
[ 7.075869] PM: Registering ACPI NVS region [mem 0xa58f1000-0xa58f7fff] (28672 bytes)
[ 7.083764] PM: Registering ACPI NVS region [mem 0xb770c000-0xb77b8fff] (708608 bytes)
[ 7.091924] initcall e820_mark_nvs_memory+0x0/0x41 returned 0 after 1953 usecs
[ 7.099128] calling cpufreq_tsc+0x0/0x37 @ 1
[ 7.103549] initcall cpufreq_tsc+0x0/0x37 returned 0 after 0 usecs
[ 7.109787] calling reboot_init+0x0/0x1d @ 1
[ 7.114209] initcall reboot_init+0x0/0x1d returned 0 after 0 usecs
[ 7.120447] calling init_lapic_sysfs+0x0/0x20 @ 1
[ 7.125301] initcall init_lapic_sysfs+0x0/0x20 returned 0 after 0 usecs
[ 7.131974] calling cpu_hotplug_pm_sync_init+0x0/0x2f @ 1
[ 7.137520] initcall cpu_hotplug_pm_sync_init+0x0/0x2f returned 0 after 0 usecs
[ 7.144887] calling alloc_frozen_cpus+0x0/0x8 @ 1
[ 7.149739] initcall alloc_frozen_cpus+0x0/0x8 returned 0 after 0 usecs
[ 7.156412] calling wq_sysfs_init+0x0/0x14 @ 1
[ 7.161108] kworker/u2:0 (15) used greatest stack depth: 6168 bytes left
[ 7.167854] initcall wq_sysfs_init+0x0/0x14 returned 0 after 976 usecs
[ 7.174381] calling ksysfs_init+0x0/0x94 @ 1
[ 7.178844] initcall ksysfs_init+0x0/0x94 returned 0 after 0 usecs
[ 7.185039] calling pm_init+0x0/0x4e @ 1
[ 7.189151] initcall pm_init+0x0/0x4e returned 0 after 0 usecs
[ 7.195004] calling pm_disk_init+0x0/0x19 @ 1
[ 7.199527] initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs
[ 7.205838] calling swsusp_header_init+0x0/0x30 @ 1
[ 7.210865] initcall swsusp_header_init+0x0/0x30 returned 0 after 0 usecs
[ 7.217710] calling init_jiffies_clocksource+0x0/0x12 @ 1
[ 7.223257] initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs
[ 7.230622] calling cgroup_wq_init+0x0/0x5c @ 1
[ 7.235311] initcall cgroup_wq_init+0x0/0x5c returned 0 after 0 usecs
[ 7.241803] calling event_trace_enable+0x0/0x173 @ 1
[ 7.247407] initcall event_trace_enable+0x0/0x173 returned 0 after 0 usecs
[ 7.254267] calling init_zero_pfn+0x0/0x35 @ 1
[ 7.258859] initcall init_zero_pfn+0x0/0x35 returned 0 after 0 usecs
[ 7.265273] calling fsnotify_init+0x0/0x26 @ 1
[ 7.269867] initcall fsnotify_init+0x0/0x26 returned 0 after 0 usecs
[ 7.276277] calling filelock_init+0x0/0x84 @ 1
[ 7.280883] initcall filelock_init+0x0/0x84 returned 0 after 0 usecs
[ 7.287284] calling init_misc_binfmt+0x0/0x31 @ 1
[ 7.292139] initcall init_misc_binfmt+0x0/0x31 returned 0 after 0 usecs
[ 7.298811] calling init_script_binfmt+0x0/0x16 @ 1
[ 7.303837] initcall init_script_binfmt+0x0/0x16 returned 0 after 0 usecs
[ 7.310685] calling init_elf_binfmt+0x0/0x16 @ 1
[ 7.315449] initcall init_elf_binfmt+0x0/0x16 returned 0 after 0 usecs
[ 7.322037] calling init_compat_elf_binfmt+0x0/0x16 @ 1
[ 7.327410] initcall init_compat_elf_binfmt+0x0/0x16 returned 0 after 0 usecs
[ 7.334603] calling debugfs_init+0x0/0x5c @ 1
[ 7.339121] initcall debugfs_init+0x0/0x5c returned 0 after 0 usecs
[ 7.345436] calling securityfs_init+0x0/0x53 @ 1
[ 7.350211] initcall securityfs_init+0x0/0x53 returned 0 after 0 usecs
[ 7.356789] calling prandom_init+0x0/0xe2 @ 1
[ 7.361295] initcall prandom_init+0x0/0xe2 returned 0 after 0 usecs
[ 7.367623] calling virtio_init+0x0/0x30 @ 1
[ 7.372147] initcall virtio_init+0x0/0x30 returned 0 after 0 usecs
[ 7.378318] calling __gnttab_init+0x0/0x30 @ 1
[ 7.382912] xen:grant_table: Grant tables using version 2 layout
[ 7.388993] Grant table initialized
[ 7.392530] initcall __gnttab_init+0x0/0x30 returned 0 after 1953 usecs
[ 7.399203] calling early_resume_init+0x0/0x1d0 @ 1
[ 7.404256] RTC time: 3:41:59, date: 01/25/14
[ 7.408736] initcall early_resume_init+0x0/0x1d0 returned 0 after 976 usecs
[ 7.415755] calling cpufreq_core_init+0x0/0x37 @ 1
[ 7.420695] initcall cpufreq_core_init+0x0/0x37 returned -19 after 0 usecs
[ 7.427628] calling cpuidle_init+0x0/0x40 @ 1
[ 7.432135] initcall cpuidle_init+0x0/0x40 returned -19 after 0 usecs
[ 7.438634] calling bsp_pm_check_init+0x0/0x14 @ 1
[ 7.443574] initcall bsp_pm_check_init+0x0/0x14 returned 0 after 0 usecs
[ 7.450333] calling sock_init+0x0/0x8b @ 1
[ 7.454685] initcall sock_init+0x0/0x8b returned 0 after 0 usecs
[ 7.460683] calling net_inuse_init+0x0/0x26 @ 1
[ 7.465365] initcall net_inuse_init+0x0/0x26 returned 0 after 0 usecs
[ 7.471860] calling netpoll_init+0x0/0x31 @ 1
[ 7.476367] initcall netpoll_init+0x0/0x31 returned 0 after 0 usecs
[ 7.482694] calling netlink_proto_init+0x0/0x1f7 @ 1
[ 7.487847] NET: Registered protocol family 16
[ 7.492338] initcall netlink_proto_init+0x0/0x1f7 returned 0 after 976 usecs
[ 7.499433] calling bdi_class_init+0x0/0x4d @ 1
[ 7.504218] initcall bdi_class_init+0x0/0x4d returned 0 after 0 usecs
[ 7.510649] calling kobject_uevent_init+0x0/0x12 @ 1
[ 7.515773] initcall kobject_uevent_init+0x0/0x12 returned 0 after 0 usecs
[ 7.522693] calling pcibus_class_init+0x0/0x19 @ 1
[ 7.527694] initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs
[ 7.534392] calling pci_driver_init+0x0/0x12 @ 1
[ 7.539251] initcall pci_driver_init+0x0/0x12 returned 0 after 0 usecs
[ 7.545769] calling backlight_class_init+0x0/0x85 @ 1
[ 7.551028] initcall backlight_class_init+0x0/0x85 returned 0 after 0 usecs
[ 7.557991] calling video_output_class_init+0x0/0x19 @ 1
[ 7.563514] initcall video_output_class_init+0x0/0x19 returned 0 after 0 usecs
[ 7.570728] calling xenbus_init+0x0/0x26f @ 1
[ 7.575328] initcall xenbus_init+0x0/0x26f returned 0 after 0 usecs
[ 7.581581] calling tty_class_init+0x0/0x38 @ 1
[ 7.586328] initcall tty_class_init+0x0/0x38 returned 0 after 0 usecs
[ 7.592760] calling vtconsole_class_init+0x0/0xc2 @ 1
[ 7.598129] initcall vtconsole_class_init+0x0/0xc2 returned 0 after 0 usecs
[ 7.605075] calling wakeup_sources_debugfs_init+0x0/0x2b @ 1
[ 7.610886] initcall wakeup_sources_debugfs_init+0x0/0x2b returned 0 after 0 usecs
[ 7.618509] calling register_node_type+0x0/0x34 @ 1
[ 7.623667] initcall register_node_type+0x0/0x34 returned 0 after 0 usecs
[ 7.630441] calling i2c_init+0x0/0x70 @ 1
[ 7.634769] initcall i2c_init+0x0/0x70 returned 0 after 0 usecs
[ 7.640676] calling init_ladder+0x0/0x12 @ 1
[ 7.645093] initcall init_ladder+0x0/0x12 returned -19 after 0 usecs
[ 7.651506] calling init_menu+0x0/0x12 @ 1
[ 7.655754] initcall init_menu+0x0/0x12 returned -19 after 0 usecs
[ 7.661993] calling amd_postcore_init+0x0/0x143 @ 1
[ 7.667019] initcall amd_postcore_init+0x0/0x143 returned 0 after 0 usecs
[ 7.673879] calling boot_params_ksysfs_init+0x0/0x237 @ 1
[ 7.679431] initcall boot_params_ksysfs_init+0x0/0x237 returned 0 after 0 usecs
[ 7.686778] calling arch_kdebugfs_init+0x0/0x233 @ 1
[ 7.691922] initcall arch_kdebugfs_init+0x0/0x233 returned 0 after 0 usecs
[ 7.698826] calling mtrr_if_init+0x0/0x78 @ 1
[ 7.703333] initcall mtrr_if_init+0x0/0x78 returned -19 after 0 usecs
[ 7.709832] calling ffh_cstate_init+0x0/0x2a @ 1
[ 7.714599] initcall ffh_cstate_init+0x0/0x2a returned 0 after 0 usecs
[ 7.721183] calling activate_jump_labels+0x0/0x32 @ 1
[ 7.726385] initcall activate_jump_labels+0x0/0x32 returned 0 after 0 usecs
[ 7.733404] calling acpi_pci_init+0x0/0x61 @ 1
[ 7.737997] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 7.745623] ACPI: bus type PCI registered
[ 7.749696] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 7.756197] initcall acpi_pci_init+0x0/0x61 returned 0 after 2929 usecs
[ 7.762870] calling dma_bus_init+0x0/0xd6 @ 1
[ 7.767499] kworker/u2:0 (30) used greatest stack depth: 5768 bytes left
[ 7.774205] initcall dma_bus_init+0x0/0xd6 returned 0 after 976 usecs
[ 7.780726] calling dma_channel_table_init+0x0/0xde @ 1
[ 7.786110] initcall dma_channel_table_init+0x0/0xde returned 0 after 0 usecs
[ 7.793288] calling setup_vcpu_hotplug_event+0x0/0x22 @ 1
[ 7.798837] initcall setup_vcpu_hotplug_event+0x0/0x22 returned 0 after 0 usecs
[ 7.806201] calling register_xen_pci_notifier+0x0/0x38 @ 1
[ 7.811834] initcall register_xen_pci_notifier+0x0/0x38 returned 0 after 0 usecs
[ 7.819289] calling xen_pcpu_init+0x0/0xcc @ 1
[ 7.824733] initcall xen_pcpu_init+0x0/0xcc returned 0 after 0 usecs
[ 7.831080] calling dmi_id_init+0x0/0x31d @ 1
[ 7.835833] initcall dmi_id_init+0x0/0x31d returned 0 after 0 usecs
[ 7.842088] calling dca_init+0x0/0x20 @ 1
[ 7.846246] dca service started, version 1.12.1
[ 7.850899] initcall dca_init+0x0/0x20 returned 0 after 976 usecs
[ 7.856996] calling iommu_init+0x0/0x58 @ 1
[ 7.861336] initcall iommu_init+0x0/0x58 returned 0 after 0 usecs
[ 7.867481] calling pci_arch_init+0x0/0x69 @ 1
[ 7.872091] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 7.881435] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 7.896157] PCI: Using configuration type 1 for base access
[ 7.901715] initcall pci_arch_init+0x0/0x69 returned 0 after 7.913398] initcall topology_init+0x0/0x98 returned 0 after 0 usecs
[ 7.919759] calling mtrr_init_finialize+0x0/0x36 @ 1
[ 7.924853] initcall mtrr_init_finialize+0x0/0x36 returned 0 after 0 usecs
[ 7.931788] calling init_vdso+0x0/0x135 @ 1
[ 7.936121] initcall init_vdso+0x0/0x135 returned 0 after 0 usecs
[ 7.942274] calling sysenter_setup+0x0/0x2dd @ 1
[ 7.947040] initcall sysenter_setup+0x0/0x2dd returned 0 after 0 usecs
[ 7.953626] calling param_sysfs_init+0x0/0x194 @ 1
[ 7.975052] initcall param_sysfs_init+0x0/0x194 returned 0 after 14648 usecs
[ 7.982090] calling pm_sysrq_init+0x0/0x19 7.993092] calling default_bdi_init+0x0/0x65 @ 1
[ 7.998253] initcall default_bdi_init+0x0/0x65 returned 0 after 0 usecs
[ 8.004853] calling init_bio+0x0/0xe9 @ 1
[ 8.009069] bio: create slab <bio-0> at 0
[ 8.013134] initcall init_bio+0x0/0xe9 returned 0 after 976 usecs
[ 8.019241] calling cryptomgr_init+0x0/0x12 @ 1
[ 8.023920] initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs
[ 8.030419] calling blk_settings_init+0x0/0x2c @ 1
[ 8.035359] initcall blk_settings_init+0x0/0x2c returned 0 after 0 usecs
[ 8.042118] calling blk_ioc_init+0x0/0x2a @ 1
[ 8.046636] initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs
[ 8.052952] calling blk_softirq_init+0x0/0x6e @ 1
[ 8.057805] initcall blk_softirq_init+0x0/0x6e returned 0 after 0 usecs
[ 8.064477] calling blk_iopoll_setup+0x0/0x6e @ 1
[ 8.069331] initcall blk_iopoll_setup+0x0/0x6e returned 0 after 0 usecs
[ 8.076003] calling blk_mq_init+0x0/0x5f @ 1
[ 8.080424] initcall blk_mq_init+0x0/0x5f returned 0 after 0 usecs
[ 8.086665] calling genhd_device_init+0x0/0x85 @ 1
[ 8.091745] initcall genhd_device_init+0x0/0x85 returned 0 after 0 usecs
[ 8.098435] calling pci_slot_init+0x0/0x50 @ 1
[ 8.103034] initcall pci_slot_init+0x0/0x50 returned 0 after 0 usecs
[ 8.109437] calling fbmem_init+0x0/0x98 @ 1
[ 8.113843] initcall fbmem_init+0x0/0x98 returned 0 after 0 usecs
[ 8.119927] calling acpi_init+0x0/0x27a @ 1
[ 8.124283] ACPI: Added _OSI(Module Device)
[ 8.128504] ACPI: Added _OSI(Processor Device)
[ 8.133010] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 8.137774] ACPI: Added _OSI(Processor Aggregator Device)
[ 8.147027] ACPI: Executed 1 blocks of module-level executable AML code
[ 8.179322] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 8.187216] \_SB_:_OSC invalid UUID
[ 8.190694] _Oata:1 1f
[ 8.196378] ACPI: SSDT 00000000b76c1c18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 8.205616] ACPI: Dynamic OEM Table Load:
[ 8.209610] ACPI: SSDT (null) 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 8.219471] ACPI: Interpreter enabled
[ 8.223140] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 8.232400] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)
[ 8.241683] ACPI: (supports S0 S1 S4 S5)
[ 8.245654] ACPI: Using IOAPIC for interrupt routing
[ 8.251056] HEST: Table parsing has been initialized.
[ 8.256107] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 8.266510] ACPI: No dock devices found.
[ 8.368976] ACPI: Power Resource [FN00] (off)
[ 8.374125] ACPI: Power Resource [FN01] (off)
[ 8.379306] ACPI: Power Resource [FN02] (off)
[ 8.384446] ACPI: Power Resource [FN03] (off)
[ 8.389594] ACPI: Power Resource [FN04] (off)
[ 8.399292] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 8.405472] acpi PNP0A08:00: _OSC: OS supports [Exten
[ 8.416241] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 8.425254] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 8.438579] PCI host bridge to bus 0000:00
[ 8.442672] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 8.448218] p0-0x000d7fff]
[ 8.474563] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 8.481496] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 8.488428] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 8.495363] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 8.502295] pci_bus 0000:00: root bus resource [mem 0xbe200000-0xfeafffff]
[ 8.509241] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000
(XEN) [2014-01-25 03:42:01] PHYSDEVOP_pci_device_add of 0:0.0 flags:0
(XEN) [2014-01-25 03:42:01] PCI add device 0000:00:00.0
[ 8.526971] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 8.533130] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 8.539756] pci 0000:00:01.0: System wakeup disabled by ACPI
(XEN) [2014-01-25 03:42:01] PHYSDEVOP_pci_device_add of 0:1.0 flags:0
(XEN) [2014-01-25 03:42:01] PCI add device 0000:00:01.0
[ 8.556754] pci 0000:00:01.1: [8086:0c05] type 01 class 0x060400
[ 8.562818] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
(XEN) [2014-01-25 03:42:01] PHYSDEVOP_pci_device_add of 0:1.1 flags:0
(XEN) [2014-01-25 03:42:01] PCI add device 0000:00:01.1
[ 8.580646] pci 0000:00:02.0: [8086:041a] type 00 class 0x030000
[ 8.586663] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 8.593500] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 8.600776] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
(XEN) [2014-01-25 03:42:01] PHYSDEVOP_pci_device_add of 0:2.0 flags:0
(XEN) [2014-01-25 03:42:01] PCI add device 0000:00:02.0
[ 8.618132] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 8.624151] pci 0000:00:03.0: reg 0x10: [mem 0xf1b34000-0xf1b37fff 64bit]
(XEN) [2014-01-25 03:42:01] PHYSDEVOP_pci_device_add of 0:3.0 flags:0
(XEN) [2014-01-25 03:42:01] PCI add device 0000:00:03.0
[ 8.642734] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 8.648793] pci 0000:00:14.0: reg 0x10: [mem 0xf1b20000-0xf1b2ffff 64bit]
[ 8.655724] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 8.661958] pci 0000:00:14.0: System wakeup disabled by ACPI
(XEN) [2014-01-25 03:42:01] PHYSDEVOP_pci_device_add of 0:14.0 flags:0
(XEN) [2014-01-25 03:42:01] PCI add device 0000:00:14.0
[ 8.679051] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 8.685090] pci 0000:00:16.0: reg 0x10: [mem 0xf1b3f000-0xf1b3f00f 64bit]
[ 8.692031] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
(XEN) [2014-01-25 03:42:01] PHYSDEVOP_pci_device_add of 0:16.0 flags:0
(XEN) [2014-01-25 03:42:01] PCI add device 0000:00:16.0
[ 8.709907] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
[ 8.715949] pci 0000:00:19.0: reg 0x10: [mem 0xf1b00000-0xf1b1ffff]
[ 8.722242] pci 0000:00:19.0: reg 0x14: [mem 0xf1b3d000-0xf1b3dfff]
[ 8.728569] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 8.734328] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 8.740823] pci 0000:00:19.0: System wakeup disabled by ACPI
(XEN) [2014-01-25 03:42:01] PHYSDEVOP_pci_device_add of 0:19.0 flags:0
(XEN) [2014-01-25 03:42:01] PCI add device 0000:00:19.0
[ 8.757917] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 8.763959] pci 0000:00:1a.0: reg 0x10: [mem 0xf1b3c000-0xf1b3c3ff]
[ 8.770411] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 8.776995] pci 0000:00:1a.0: System wakeup disabled by ACPI
(XEN) [2014-01-25 03:42:01] PHYSDEVOP_pci_device_add of 0:1a.0 flags:0
(XEN) [2014-01-25 03:42:01] PCI add device 0000:00:1a.0
[ 8.794132] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 8.800166] pci 0000:00:1b.0: reg 0x10: [mem 0xf1b30000-0xf1b33fff 64bit]
[ 8.807131] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 8.813616] pci 0000:00:1b.0: System wakeup disabled by ACPI
(XEN) [2014-01-25 03:42:01] PHYSDEVOP_pci_device_add of 0:1b.0 flags:0
(XEN) [2014-01-25 03:42:01] PCI add device 0000:00:1b.0
[ 8.830699] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 8.836862] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 8.843355] pci 0000:00:1c.0: System wakeup disabled by ACPI
(XEN) [2014-01-25 03:42:01] PHYSDEVOP_pci_device_add of 0:1c.0 flags:0
(XEN) [2014-01-25 03:42:01] PCI add device 0000:00:1c.0
[ 8.860448] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[ 8.866613] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 8.873107] pci 0000:00:1c.3: System wakeup disabled by ACPI
(XEN) [2014-01-25 03:42:01] PHYSDEVOP_pci_device_add of 0:1c.3 flags:0
(XEN) [2014-01-25 03:42:01] PCI add device 0000:00:1c.3
[ 8.890194] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
[ 8.896358] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 8.902851] pci 0000:00:1c.5: System wakeup disabled by ACPI
(XEN) [2014-01-25 03:42:01] PHYSDEVOP_pci_device_add of 0:1c.5 flags:0
(XEN) [2014-01-25 03:42:01] PCI add device 0000:00:1c.5
[ 8.919937] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
[ 8.926101] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 8.932593] pci 0000:00:1c.6: System wakeup disabled by ACPI
(XEN) [2014-01-25 03:42:01] PHYSDEVOP_pci_device_add of 0:1c.6 flags:0
(XEN) [2014-01-25 03:42:01] PCI add device 0000:00:1c.6
[ 8.949670] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
[ 8.955834] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 8.962332] pci 0000:00:1c.7: System wakeup disabled by ACPI
(XEN) [2014-01-25 03:42:01] PHYSDEVOP_pci_device_add of 0:1c.7 flags:0
(XEN) [2014-01-25 03:42:01] PCI add device 0000:00:1c.7
[ 8.979430] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 8.985470] pci 0000:00:1d.0: reg 0x10: [mem 0xf1b3b000-0xf1b3b3ff]
[ 8.991923] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 8.998505] pci 0000:00:1d.0: System wakeup disabled by ACPI
(XEN) [2014-01-25 03:42:02] PHYSDEVOP_pci_device_add of 0:1d.0 flags:0
(XEN) [2014-01-25 03:42:02] PCI add device 0000:00:1d.0
[ 9.015607] pci 0000:00:1f.0: [8086:8c56] type 00 class 0x060100
(XEN) [2014-01-25 03:42:02] PHYSDEVOP_pci_device_add of 0:1f.0 flags:0
(XEN) [2014-01-25 03:42:02] PCI add device 0000:00:1f.0
[ 9.033538] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 9.039575] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 9.045178] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 9.050811] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 9.056442] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 9.062077] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 9.067708] pci 0000:00:1f.2: reg 0x24: [mem 0xf1b3a000-0xf1b3a7ff]
[ 9.074118] pci 0000:00:1f.2: PME# supported from D3hot
(XEN) [2014-01-25 03:42:02] PHYSDEVOP_pci_device_add of 0:1f.2 flags:0
(XEN) [2014-01-25 03:42:02] PCI add device 0000:00:1f.2
[ 9.091125] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 9.097155] pci 0000:00:1f.3: reg 0x10: [mem 0xf1b39000-0xf1b390ff 64bit]
[ 9.104006] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
(XEN) [2014-01-25 03:42:02] PHYSDEVOP_pci_device_add of 0:1f.3 flags:0
(XEN) [2014-01-25 03:42:02] PCI add device 0000:00:1f.3
[ 9.121387] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000
[ 9.127429] pci 0000:00:1f.6: reg 0x10: [mem 0xf1b38000-0xf1b38fff 64bit]
(XEN) [2014-01-25 03:42:02] PHYSDEVOP_pci_device_add of 0:1f.6 flags:0
(XEN) [2014-01-25 03:42:02] PCI add device 0000:00:1f.6
[ 9.146352] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-3e] (conflicts with (null) [bus 00-3e])
[ 9.157128] pci 0000:00:01.0: PCI bridge to [bus 01-ff]
[ 9.162409] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 9.169273] pci_bus 0000:02: busn_res: can not insert [bus 02-ff] under [bus 00-3e] (conflicts with (null) [bus 00-3e])
[ 9.180074] pci 0000:02:00.0: [8086:10c9] type 00 class 0x020000
[ 9.186118] pci 0000:02:00.0: reg 0x10: [mem 0xf1420000-0xf143ffff]
[ 9.192440] pci 0000:02:00.0: reg 0x14: [mem 0xf1000000-0xf13fffff]
[ 9.198767] pci 0000:02:00.0: reg 0x18: [io 0xe020-0xe03f]
[ 9.204401] pci 0000:02:00.0: reg 0x1c: [mem 0xf1444000-0xf1447fff]
[ 9.210745] pci 0000:02:00.0: reg 0x30: [mem 0xf0c00000-0xf0ffffff pref]
[ 9.217536] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 9.223664] pci 0000:02:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
[ 9.230579] pci 0000:02:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
(XEN) [2014-01-25 03:42:02] PHYSDEVOP_pci_device_add of 2:0.0 flags:0
(XEN) [2014-01-25 03:42:02] PCI add device 0000:02:00.0
[ 9.248930] pci 0000:02:00.1: [8086:10c9] type 00 class 0x020000
[ 9.254942] pci 0000:02:00.1: reg 0x10: [mem 0xf1400000-0xf141ffff]
[ 9.261262] pci 0000:02:00.1: reg 0x14: [mem 0xf0800000-0xf0bfffff]
[ 9.267589] pci 0000:02:00.1: reg 0x18: [io 0xe000-0xe01f]
[ 9.273222] pci 0000:02:00.1: reg 0x1c: [mem 0xf1440000-0xf1443fff]
[ 9.279568] pci 0000:02:00.1: reg 0x30: [mem 0xf0400000-0xf07fffff pref]
[ 9.286359] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[ 9.292483] pci 0000:02:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
[ 9.299398] pci 0000:02:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
(XEN) [2014-01-25 03:42:02] PHYSDEVOP_pci_device_add of 2:0.1 flags:0
(XEN) [2014-01-25 03:42:02] PCI add device 0000:02:00.1
[ 9.319827] pci 0000:00:01.1: PCI bridge to [bus 02-ff]
[ 9.325048] pci 0000:00:01.1: bridge window [io 0xe000-0xefff]
[ 9.331200] pci 0000:00:01.1: bridge window [mem 0xf0400000-0xf14fffff]
[ 9.338047] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 03
[ 9.345085] pci_bus 0000:04: busn_res: can not insert [bus 04-ff] under [bus 00-3e] (conflicts with (null) [bus 00-3e])
[ 9.355901] pci 0000:04:00.0: [8086:105e] type 00 class 0x020000
[ 9.361949] pci 0000:04:00.0: reg 0x10: [mem 0xf1aa0000-0xf1abffff]
[ 9.368263] pci 0000:04:00.0: reg 0x14: [mem 0xf1a80000-0xf1a9ffff]
[ 9.374589] pci 0000:04:00.0: reg 0x18: [io 0xd020-0xd03f]
[ 9.380305] pci 0000:04:00.0: reg 0x30: [mem 0xf1a60000-0xf1a7ffff pref]
[ 9.387132] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 9.393360] pci 0000:04:00.0: System wakeup disabled by ACPI
(XEN) [2014-01-25 03:42:02] PHYSDEVOP_pci_device_add of 4:0.0 flags:0
(XEN) [2014-01-25 03:42:02] PCI add device 0000:04:00.0
[ 9.410427] pci 0000:04:00.1: [8086:105e] type 00 class 0x020000
[ 9.416462] pci 0000:04:00.1: reg 0x10: [mem 0xf1a40000-0xf1a5ffff]
[ 9.422774] pci 0000:04:00.1: reg 0x14: [mem 0xf1a20000-0xf1a3ffff]
[ 9.429100] pci 0000:04:00.1: reg 0x18: [io 0xd000-0xd01f]
[ 9.434819] pci 0000:04:00.1: reg 0x30: [mem 0xf1a00000-0xf1a1ffff pref]
[ 9.441643] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold
(XEN) [2014-01-25 03:42:02] PHYSDEVOP_pci_device_add of 4:0.1 flags:0
(XEN) [2014-01-25 03:42:02] [VT-D]iommu.c:1452: d0:PCIe: map 0000:04:00.1
(XEN) [2014-01-25 03:42:02] PCI add device 0000:04:00.1
[ 9.467789] pci 0000:00:1c.0: PCI bridge to [bus 04-ff]
[ 9.473010] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 9.479161] pci 0000:00:1c.0: bridge window [mem 0xf1a00000-0xf1afffff]
[ 9.486015] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04
[ 9.493043] pci_bus 0000:05: busn_res: can not insert [bus 05-ff] under [bus 00-3e] (conflicts with (null) [bus 00-3e])
[ 9.503865] pci 0000:05:00.0: [8086:1533] type 00 class 0x020000
[ 9.509908] pci 0000:05:00.0: reg 0x10: [mem 0xf1900000-0xf197ffff]
[ 9.516246] pci 0000:05:00.0: reg 0x18: [io 0xc000-0xc01f]
[ 9.521858] pci 0000:05:00.0: reg 0x1c: [mem 0xf1980000-0xf1983fff]
[ 9.528361] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 9.534597] pci 0000:05:00.0: System wakeup disabled by ACPI
(XEN) [2014-01-25 03:42:02] PHYSDEVOP_pci_device_add of 5:0.0 flags:0
(XEN) [2014-01-25 03:42:02] PCI add device 0000:05:00.0
[ 9.553743] pci 0000:00:1c.3: PCI bridge to [bus 05-ff]
[ 9.558966] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 9.565115] pci 0000:00:1c.3: bridge window [mem 0xf1900000-0xf19fffff]
[ 9.571966] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 05
[ 9.579040] pci_bus 0000:06: busn_res: can not insert [bus 06-ff] under [bus 00-3e] (conflicts with (null) [bus 00-3e])
[ 9.589864] pci 0000:06:00.0: [10e3:8113] type 01 class 0x060401
[ 9.596108] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 9.602879] pci 0000:06:00.0: System wakeup disabled by ACPI
(XEN) [2014-01-25 03:42:02] PHYSDEVOP_pci_device_add of 6:0.0 flags:0
(XEN) [2014-01-25 03:42:02] PCI add device 0000:06:00.0
[ 9.619891] pci 0000:00:1c.5: PCI bridge to [bus 06-ff]
[ 9.625122] pci 0000:00:1c.5: bridge window [mem 0xf1500000-0xf16fffff]
[ 9.631984] pci 0000:06:00.0: bridge configuration invalid ([bus 06-07]), reconfiguring
[ 9.640473] pci 0000:07:01.0: [3388:0021] type 01 class 0x060400
[ 9.646667] pci 0000:07:01.0: supports D1 D2
[ 9.650926] pci 0000:07:01.0: PME# supported from D1 D2 D3hot D3cold
(XEN) [2014-01-25 03:42:02] PHYSDEVOP_pci_device_add of 7:1.0 flags:0
(XEN) [2014-01-25 03:42:02] PCI add device 0000:07:01.0
[ 9.668875] pci 0000:07:03.0: [104c:8023] type 00 class 0x0c0010
[ 9.674912] pci 0000:07:03.0: reg 0x10: [mem 0xf1604000-0xf16047ff]
[ 9.681221] pci 0000:07:03.0: reg 0x14: [mem 0xf1600000-0xf1603fff]
[ 9.687704] pci 0000:07:03.0: supports D1 D2
[ 9.691961] pci 0000:07:03.0: PME# supported from D0 D1 D2 D3hot
(XEN) [2014-01-25 03:42:02] PHYSDEVOP_pci_device_add of 7:3.0 flags:0
(XEN) [2014-01-25 03:42:02] [VT-D]iommu.c:1464: d0:PCI: map 0000:07:03.0
(XEN) [2014-01-25 03:42:02] PCI add device 0000:07:03.0
[ 9.716013] pci 0000:06:00.0: PCI bridge to [bus 07-ff] (subtractive decode)
[ 9.723066] pci 0000:06:00.0: bridge window [mem 0xf1500000-0xf16fffff]
[ 9.729909] pci 0000:06:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 9.738478] pci 0000:06:00.0: bridge window [mem 0xf1500000-0xf16fffff] (subtractive decode)
[ 9.747143] pci 0000:06:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 9.755722] pci 0000:06:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 9.764303] pci 0000:07:01.0: bridge configuration invalid ([bus 07-07]), reconfiguring
[ 9.772694] pci 0000:08:08.0: [109e:036e] type 00 class 0x040000
[ 9.778825] pci 0000:08:08.0: reg 0x10: [mem 0xf1507000-0xf1507fff pref]
(XEN) [2014-01-25 03:42:02] PHYSDEVOP_pci_device_add of 8:8.0 flags:0
(XEN) [2014-01-25 03:42:02] [VT-D]iommu.c:1464: d0:PCI: map 0000:08:08.0
(XEN) [2014-01-25 03:42:02] PCI add device 0000:08:08.0
[ 9.803612] pci 0000:08:08.1: [109e:0878] type 00 class 0x048000
[ 9.809661] pci 0000:08:08.1: reg 0x10: [mem 0xf1506000-0xf1506fff pref]
(XEN) [2014-01-25 03:42:02] PHYSDEVOP_pci_device_add of 8:8.1 flags:0
(XEN) [2014-01-25 03:42:02] [VT-D]iommu.c:1464: d0:PCI: map 0000:08:08.1
(XEN) [2014-01-25 03:42:02] PCI add device 0000:08:08.1
[ 9.834476] pci 0000:08:09.0: [109e:036e] type 00 class 0x040000
[ 9.840523] pci 0000:08:09.0: reg 0x10: [mem 0xf1505000-0xf1505fff pref]
(XEN) [2014-01-25 03:42:02] PHYSDEVOP_pci_device_add of 8:9.0 flags:0
(XEN) [2014-01-25 03:42:02] [VT-D]iommu.c:1464: d0:PCI: map 0000:08:09.0
(XEN) [2014-01-25 03:42:02] PCI add device 0000:08:09.0
[ 9.865321] pci 0000:08:09.1: [109e:0878] type 00 class 0x048000
[ 9.871371] pci 0000:08:09.1: reg 0x10: [mem 0xf1504000-0xf1504fff pref]
(XEN) [2014-01-25 03:42:02] PHYSDEVOP_pci_device_add of 8:9.1 flags:0
(XEN) [2014-01-25 03:42:02] [VT-D]iommu.c:1464: d0:PCI: map 0000:08:09.1
(XEN) [2014-01-25 03:42:02] PCI add device 0000:08:09.1
[ 9.896201] pci 0000:08:0a.0: [109e:036e] type 00 class 0x040000
[ 9.902255] pci 0000:08:0a.0: reg 0x10: [mem 0xf1503000-0xf1503fff pref]
(XEN) [2014-01-25 03:42:02] PHYSDEVOP_pci_device_add of 8:a.0 flags:0
(XEN) [2014-01-25 03:42:02] [VT-D]iommu.c:1464: d0:PCI: map 0000:08:0a.0
(XEN) [2014-01-25 03:42:02] PCI add device 0000:08:0a.0
[ 9.927051] pci 0000:08:0a.1: [109e:0878] type 00 class 0x048000
[ 9.933101] pci 0000:08:0a.1: reg 0x10: [mem 0xf1502000-0xf1502fff pref]
(XEN) [2014-01-25 03:42:02] PHYSDEVOP_pci_device_add of 8:a.1 flags:0
(XEN) [2014-01-25 03:42:02] [VT-D]iommu.c:1464: d0:PCI: map 0000:08:0a.1
(XEN) [2014-01-25 03:42:02] PCI add device 0000:08:0a.1
[ 9.957922] pci 0000:08:0b.0: [109e:036e] type 00 class 0x040000
[ 9.963976] pci 0000:08:0b.0: reg 0x10: [mem 0xf1501000-0xf1501fff pref]
(XEN) [2014-01-25 03:42:02] PHYSDEVOP_pci_device_add of 8:b.0 flags:0
(XEN) [2014-01-25 03:42:02] [VT-D]iommu.c:1464: d0:PCI: map 0000:08:0b.0
(XEN) [2014-01-25 03:42:02] PCI add device 0000:08:0b.0
[ 9.988773] pci 0000:08:0b.1: [109e:0878] type 00 class 0x048000
[ 9.994823] pci 0000:08:0b.1: reg 0x10: [mem 0xf1500000-0xf1500fff pref]
(XEN) [2014-01-25 03:42:02] PHYSDEVOP_pci_device_add of 8:b.1 flags:0
(XEN) [2014-01-25 03:42:03] [VT-D]iommu.c:1464: d0:PCI: map 0000:08:0b.1
(XEN) [2014-01-25 03:42:03] PCI add device 0000:08:0b.1
[ 10.019675] pci 0000:07:01.0: PCI bridge to [bus 08-ff]
[ 10.024903] pci 0000:07:01.0: bridge window [mem 0xf1500000-0xf15fffff]
[ 10.031739] pci_bus 0000:08: busn_res: [bus 08-ff] end is updated to 08
[ 10.038412] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 08
[ 10.045083] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 08
[ 10.052117] pci_bus 0000:09: busn_res: can not insert [bus 09-ff] under [bus 00-3e] (conflicts with (null) [bus 00-3e])
[ 10.063011] pci 0000:09:00.0: [1912:0015] type 00 class 0x0c0330
[ 10.069124] pci 0000:09:00.0: reg 0x10: [mem 0xf1800000-0xf1801fff 64bit]
[ 10.076291] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[ 10.082582] pci 0000:09:00.0: System wakeup disabled by ACPI
(XEN) [2014-01-25 03:42:03] PHYSDEVOP_pci_device_add of 9:0.0 flags:0
(XEN) [2014-01-25 03:42:03] PCI add device 0000:09:00.0
[ 10.101766] pci 0000:00:1c.6: PCI bridge to [bus 09-ff]
[ 10.106995] pci 0000:00:1c.6: bridge window [mem 0xf1800000-0xf18fffff]
[ 10.113841] pci_bus 0000:09: busn_res: [bus 09-ff] end is updated to 09
[ 10.120878] pci_bus 0000:0a: busn_res: can not insert [bus 0a-ff] under [bus 00-3e] (conflicts with (null) [bus 00-3e])
[ 10.131683] pci 0000:0a:00.0: [1b21:0612] type 00 class 0x010601
[ 10.137730] pci 0000:0a:00.0: reg 0x10: [io 0xb050-0xb057]
[ 10.143357] pci 0000:0a:00.0: reg 0x14: [io 0xb040-0xb043]
[ 10.148988] pci 0000:0a:00.0: reg 0x18: [io 0xb030-0xb037]
[ 10.154624] pci 0000:0a:00.0: reg 0x1c: [io 0xb020-0xb023]
[ 10.160255] pci 0000:0a:00.0: reg 0x20: [io 0xb000-0xb01f]
[ 10.165889] pci 0000:0a:00.0: reg 0x24: [mem 0xf1700000-0xf17001ff]
[ 10.172424] pci 0000:0a:00.0: System wakeup disabled by ACPI
(XEN) [2014-01-25 03:42:03] PHYSDEVOP_pci_device_add of a:0.0 flags:0
(XEN) [2014-01-25 03:42:03] [VT-D]iommu.c:1452: d0:PCIe: map 0000:0a:00.0
(XEN) [2014-01-25 03:42:03] PCI add device 0000:0a:00.0
[ 10.198063] pci 0000:00:1c.7: PCI bridge to [bus 0a-ff]
[ 10.203284] pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
[ 10.209434] pci 0000:00:1c.7: bridge window [mem 0xf1700000-0xf17fffff]
[ 10.216286] pci_bus 0000:0a: busn_res: [bus 0a-ff] end is updated to 0a
[ 10.223047] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 10.234866] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 10.242188] ACPI: PCI Interrupt Link [LNKB] ( PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 10.279883] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 10.287196] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 10.295636] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 10.300430] ACPI: \_SB_.PCI0: notify handler is installed
[ 10.305914] Found 1 acpi root devices
[ 10.309716] initcall acpi_init+0x0/0x27a returned 0 after 443359 usecs
[ 10.316232] calling pnp_init+0x0/0x12 @ 1
[ 10.320575] initcall pnp_init+0x0/0x12 returned 0 after 0 usecs
[ 10.326492] calling balloon_init+0x0/0x242 @ 1
[ 10.331082] xen:balloon: Initialising balloon driver
[ 10.336108] initcall balloon_init+0x0/0x242 returned 0 after 976 usecs
[ 10.342694] calling xen_setup_shutdown_event+0x0/0x30 @ 1
[ 10.348240] initcall xen_setup_shutdown_event+0x0/0x30 returned 0 after 0 usecs
[ 10.355605] calling xenbus_probe_backend_init+0x0/0x2d @ 1
[ 10.361335] initcall xenbus_probe_backend_init+0x0/0x2d returned 0 after 0 usecs
[ 10.368723] calling xenbus_probe_frontend_init+0x0/0x72 @ 1
[ 10.374558] initcall xenbus_probe_frontend_init+0x0/0x72 returned 0 after 0 usecs
[ 10.382022] calling xen_acpi_pad_init+0x0/0x47 @ 1
[ 10.387039] initcall xen_acpi_pad_init+0x0/0x47 returned 0 after 0 usecs
[ 10.393730] calling balloon_init+0x0/0xfa @ 1
[ 10.398234] xen_balloon: Initialising balloon driver
[ 10.403540] initcall balloon_init+0x0/0xfa returned 0 after 976 usecs
[ 10.409974] calling misc_init+0x0/0xba @ 1
[ 10.414312] initcall misc_init+0x0/0xba returned 0 after 0 usecs
[ 10.420314] calling vga_arb_device_init+0x0/0xde @ 1
[ 10.425575] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 10.433649] vgaarb: loaded
[ 10.436418] vgaarb: bridge control possible 0000:00:02.0
[ 10.441792] initcall vga_arb_device_init+0x0/0xde returned 0 after 2929 usecs
[ 10.448986] calling cn_init+0x0/0xc0 @ 1
[ 10.453078] initcall cn_init+0x0/0xc0 returned 0 after 0 usecs
[ 10.458952] calling dma_buf_init+0x0/0x75 @ 1
[ 10.463471] initcall dma_buf_init+0x0/0x75 returned 0 after 0 usecs
[ 10.469785] calling phy_init+0x0/0x2e @ 1
[ 10.474166] initcall phy_init+0x0/0x2e returned 0 after 0 usecs
[ 10.480076] calling init_pcmcia_cs+0x0/0x3d @ 1
[ 10.484819] initcall init_pcmcia_cs+0x0/0x3d returned 0 after 0 usecs
[ 10.491255] calling usb_init+0x0/0x169 @ 1
[ 10.495514] ACPI: bus type USB registered
[ 10.499784] usbcore: registered new interface driver usbfs
[ 10.505366] usbcore: registered new interface driver hub
[ 10.510778] usbcore: registered new device driver usb
[ 10.515825] initcall usb_init+0x0/0x169 returned 0 after 3906 usecs
[ 10.522149] calling serio_init+0x0/0x31 @ 1
[ 10.526576] initcall serio_init+0x0/0x31 returned 0 after 0 usecs
[ 10.532663] calling input_init+0x0/0x103 @ 1
[ 10.537149] initcall input_init+0x0/0x103 returned 0 after 0 usecs
[ 10.543323] calling rtc_init+0x0/0x5b @ 1
[ 10.547548] initcall rtc_init+0x0/0x5b returned 0 after 0 usecs
[ 10.553462] calling pps_init+0x0/0xb7 @ 1
[ 10.557683] pps_core: LinuxPPS API ver. 1 registered
[ 10.562649] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 10.571834] initcall pps_init+0x0/0xb7 returned 0 after 1953 usecs
[ 10.578073] calling ptp_init+0x0/0xa4 @ 1
[ 10.582293] PTP clock support registered
[ 10.586220] initcall ptp_init+0x0/0xa4 returned 0 after 976 usecs
[ 10.592373] calling power_supply_class_init+0x0/0x44 @ 1
[ 10.597892] initcall power_supply_class_init+0x0/0x44 returned 0 after 0 usecs
[ 10.605116] calling hwmon_init+0x0/0xe3 @ 1
[ 10.609509] initcall hwmon_init+0x0/0xe3 returned 0 after 0 usecs
[ 10.615601] calling leds_init+0x0/0x40 @ 1
[ 10.619908] initcall leds_init+0x0/0x40 returned 0 after 0 usecs
[ 10.625913] calling efisubsys_init+0x0/0x142 @ 1
[ 10.630680] initcall efisubsys_init+0x0/0x142 returned 0 after 0 usecs
[ 10.637264] calling pci_subsys_init+0x0/0x4f @ 1
[ 10.642029] PCI: Using ACPI for IRQ routing
[ 10.649715] PCI: pci_cache_line_size set to 64 bytes
[ 10.654869] e820: reserve RAM buffer [mem 0x00099000-0x0009ffff]
[ 10.660865] e820: reserve RAM buffer [mem 0x80067000-0x83ffffff]
[ 10.666931] initcall pci_subsys_init+0x0/0x4f returned 0 after 6835 usecs
[ 10.673776] calling proto_init+0x0/0x12 @ 1
[ 10.678114] initcall proto_init+0x0/0x12 returned 0 after 0 usecs
[ 10.684261] calling net_dev_init+0x0/0x1c6 @ 1
[ 10.689488] initcall net_dev_init+0x0/0x1c6 returned 0 after 0 usecs
[ 10.695834] calling neigh_init+0x0/0x80 @ 1
[ 10.700165] initcall neigh_init+0x0/0x80 returned 0 after 0 usecs
[ 10.706316] calling fib_rules_init+0x0/0xaf @ 1
[ 10.710997] initcall fib_rules_init+0x0/0xaf returned 0 after 0 usecs
[ 10.717496] calling pktsched_init+0x0/0x10a @ 1
[ 10.722182] initcall pktsched_init+0x0/0x10a returned 0 after 0 usecs
[ 10.728676] calling tc_filter_init+0x0/0x55 @ 1
[ 10.733356] initcall tc_filter_init+0x0/0x55 returned 0 after 0 usecs
[ 10.739856] calling tc_action_init+0x0/0x55 @ 1
[ 10.744535] initcall tc_action_init+0x0/0x55 returned 0 after 0 usecs
[ 10.751037] calling genl_init+0x0/0x85 @ 1
[ 10.755298] initcall genl_init+0x0/0x85 returned 0 after 0 usecs
[ 10.761349] calling cipso_v4_init+0x0/0x61 @ 1
[ 10.765942] initcall cipso_v4_init+0x0/0x61 returned 0 after 0 usecs
[ 10.772355] calling netlbl_init+0x0/0x81 @ 1
[ 10.776774] NetLabel: Initializing
[ 10.780275] NetLabel: domain hash size = 128
[ 10.784693] NetLabel: protocols = UNLABELED CIPSOv4
[ 10.789759] NetLabel: unlabeled traffic allowed by default
[ 10.795353] initcall netlbl_init+0x0/0x81 returned 0 after 3906 usecs
[ 10.801854] calling rfkill_init+0x0/0x79 @ 1
[ 10.806450] initcall rfkill_init+0x0/0x79 returned 0 after 0 usecs
[ 10.812623] calling xen_mcfg_late+0x0/0xab @ 1
[ 10.817213] initcall xen_mcfg_late+0x0/0xab returned 0 after 0 usecs
[ 10.823642] calling xen_p2m_debugfs+0x0/0x4a @ 1
[ 10.828407] initcall xen_p2m_debugfs+0x0/0x4a returned 0 after 0 usecs
[ 10.834977] calling xen_spinlock_debugfs+0x0/0x13a @ 1
[ 10.840312] initcall xen_spinlock_debugfs+0x0/0x13a returned 0 after 0 usecs
[ 10.847370] calling nmi_warning_debugfs+0x0/0x27 @ 1
[ 10.852489] initcall nmi_warning_debugfs+0x0/0x27 returned 0 after 0 usecs
[ 10.859415] calling hpet_late_init+0x0/0x101 @ 1
[ 10.864182] initcall hpet_late_init+0x0/0x101 returned -19 after 0 usecs
[ 10.870942] calling init_amd_nbs+0x0/0xb8 @ 1
[ 10.875452] initcall init_amd_nbs+0x0/0xb8 returned 0 after 0 usecs
[ 10.881775] calling clocksource_done_booting+0x0/0x42 @ 1
[ 10.887329] Switched to clocksource xen
[ 10.891229] initcall clocksource_done_booting+0x0/0x42 returned 0 after 3810 usecs
[ 10.898851] calling tracer_init_debugfs+0x0/0x1b2 @ 1
[ 10.904344] initcall tracer_init_debugfs+0x0/0x1b2 returned 0 after 287 usecs
[ 10.911467] calling init_trace_printk_function_export+0x0/0x2f @ 1
[ 10.917800] initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 5 usecs
[ 10.925939] calling event_trace_init+0x0/0x205 @ 1
[ 10.945703] initcall event_trace_init+0x0/0x205 returned 0 after 14473 usecs
[ 10.952737] calling init_kprobe_trace+0x0/0x93 @ 1
[ 10.957687] initcall init_kprobe_trace+0x0/0x93 returned 0 after 11 usecs
[ 10.964524] calling init_pipe_fs+0x0/0x4c @ 1
[ 10.969069] initcall init_pipe_fs+0x0/0x4c returned 0 after 39 usecs
[ 10.975442] calling eventpoll_init+0x0/0xda @ 1
[ 10.980152] initcall eventpoll_init+0x0/0xda returned 0 after 29 usecs
[ 10.986709] calling anon_inode_init+0x0/0x5b @ 1
[ 10.991508] initcall anon_inode_init+0x0/0x5b returned 0 after 34 usecs
[ 10.998148] calling init_ramfs_fs+0x0/0x4d @ 1
[ 11.002749] initcall init_ramfs_fs+0x0/0x4d returned 0 after 9 usecs
[ 11.009154] calling blk_scsi_ioctl_init+0x0/0x2c5 @ 1
[ 11.014354] initcall blk_scsi_ioctl_init+0x0/0x2c5 returned 0 after 0 usecs
[ 11.021373] calling acpi_event_init+0x0/0x3a @ 1
[ 11.026159] initcall acpi_event_init+0x0/0x3a returned 0 after 17 usecs
[ 11.032813] calling pnp_system_init+0x0/0x12 @ 1
[ 11.037677] initcall pnp_system_init+0x0/0x12 returned 0 after 94 usecs
[ 11.044295] calling pnpacpi_init+0x0/0x8c @ 1
[ 11.048785] pnp: PnP ACPI init
[ 11.051928] ACPI: bus type PNP registered
[ 11.056303] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 11.062906] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 11.069797] pnp 00:01: [dma 4]
[ 11.073013] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 11.079701] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 11.086773] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 11.094311] system 00:04: [io 0x0680-0x069f] has been reserved
[ 11.100228] system 00:04: [io 0xffff] has been reserved
[ 11.105600] system 00:04: [io 0xffff] has been reserved
[ 11.110972] system 00:04: [io 0xffff] has been reserved
[ 11.116348] system 00:04: [io 0x1c00-0x1cfe] has been reserved
[ 11.122324] system 00:04: [io 0x1d00-0x1dfe] has been reserved
[ 11.128304] system 00:04: [io 0x1e00-0x1efe] has been reserved
[ 11.134285] system 00:04: [io 0x1f00-0x1ffe] has been reserved
[ 11.140267] system 00:04: [io 0x0ca4-0x0ca7] has been reserved
[ 11.146244] system 00:04: [io 0x1800-0x18fe] could not be reserved
[ 11.152570] system 00:04: [io 0x164e-0x164f] has been reserved
[ 11.158545] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 11.165426] xen: registering gsi 8 triggering 1 polarity 0
[ 11.171110] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 11.177953] system 00:06: [io 0x1854-0x1857] has been reserved
[ 11.183863] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 11.192198] kworker/u2:0 (517) used greatest stack depth: 5560 bytes left
[ 11.199015] system 00:07: [io 0x0a00-0x0a1f] has been reserved
[ 11.204963] system 00:07: [io 0x0a30-0x0a3f] has been reserved
[ 11.210936] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 11.219186] xen: registering gsi 4 triggering 1 polarity 0
[ 11.224662] Already setup the GSI :4
[ 11.228306] pnp 00:08: [dma 0 disabled]
[ 11.232467] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 11.240187] xen: registering gsi 3 triggering 1 polarity 0
[ 11.245682] pnp 00:09: [dma 0 disabled]
[ 11.249768] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 11.256613] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 11.262519] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 11.269396] xen: registering gsi 13 triggering 1 polarity 0
[ 11.275208] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 11.284867] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 11.291482] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
[ 11.298152] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[ 11.304822] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[ 11.311495] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[ 11.318168] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 11.324842] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
[ 11.331514] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 11.338187] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[ 11.344860] system 00:0c: [mem 0xfee00000-0xfeefffff] has been reserved
[ 11.351534] system 00:0c: [mem 0xf7fef000-0xf7feffff] has been reserved
[ 11.358207] system 00:0c: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[ 11.364875] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 11.373788] pnp: PnP ACPI: found 13 devices
[ 11.377963] ACPI: bus type PNP unregistered
[ 11.382208] initcall pnpacpi_init+0x0/0x8c returned 0 after 325606 usecs
[ 11.388968] calling pcistub_init+0x0/0x29f @ 1
[ 11.394231] initcall pcistub_init+0x0/0x29f returned 0 after 654 usecs
[ 11.400756] calling chr_dev_init+0x0/0xc6 @ 1
[ 11.414450] initcall chr_dev_init+0x0/0xc6 returned 0 after 8981 usecs
[ 11.420967] calling firmware_class_init+0x0/0xec 11.433117] calling init_pcmcia_bus+0x0/0x65 @ 1
[ 11.438023] initcall init_pcmcia_bus+0x0/0x65 returned 0 after 139 usecs
[ 11.444715] calling thermal_init+0x0/0x8b @ 1
[ 11.449297] initcall thermal_init+0x0/0x8b returned 0 after 76 usecs
[ 11.455642] calling cpufreq_gov_performance_init+0x0/0x12 @ 1
[ 11.461532] initcall cpufreq_gov_performance_init+0x0/0x12 returned -19 after 0 usecs
[ 11.469418] calling init_acpi_pm_clocksource+0x0/0xec @ 1
[ 11.478109] PM-Timer failed consistency check (0xffffff) - aborting.
[ 11.484543] initcall init_acpi_pm_clocksource+0x0/439] calling pcibios_assign_resources+0x0/0xbd @ 1
[ 11.497997] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 11.502969] pci 0000:02:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
[ 11.509893] pci 0000:02:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
[ 11.516827] pci 0000:02:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
[ 11.523756] pci 0000:02:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
[ 11.530691] pci 0000:02:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
[ 11.537623] pci 0000:02:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
[ 11.544557] pci 0000:02:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
[ 11.551489] pci 0000:02:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
[ 11.558423] pci 0000:02:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
[ 11.565355] pci 0000:02:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
[ 11.572289] pci 0000:02:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
[ 11.579212] pci 0000:02:00.0: BAR 7: assigned [mem 0xf1448000-0xf1467fff 64bit]
[ 11.586594] pci 0000:02:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
[ 11.593512] pci 0000:02:00.0: BAR 10: assigned [mem 0xf1468000-0xf1487fff 64bit]
[ 11.600981] pci 0000:02:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
[ 11.607898] pci 0000:02:00.1: BAR 7: assigned [mem 0xf1488000-0xf14a7fff 64bit]
[ 11.615281] pci 0000:02:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
[ 11.622197] pci 0000:02:00.1: BAR 10: assigned [mem 0xf14a8000-0xf14c7fff 64bit]
[ 11.629657] pci 0000:00:01.1: PCI bridge to [bus 02-03]
[ 11.634939] pci 0000:00:01.1: bridge window [io 0xe000-0xefff]
[ 11.641093] pci 0000:00:01.1: bridge window [mem 0xf0400000-0xf14fffff]
[ 11.647941] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 11.652965] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 11.659121] pci 0000:00:1c.0: bridge window [mem 0xf1a00000-0xf1afffff]
[ 11.665973] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 11.670991] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 11.677149] pci 0000:00:1c.3: bridge window [mem 0xf1900000-0xf19fffff]
[ 11.684000] pci 0000:07:01.0: PCI bridge to [bus 08]
[ 11.689025] pci 0000:07:01.0: bridge window [mem 0xf1500000-0xf15fffff]
[ 11.695880] pci 0000:06:00.0: PCI bridge to [bus 07-08]
[ 11.701155] pci 0000:06:00.0: bridge window [mem 0xf1500000-0xf16fffff]
[ 11.708010] pci 0000:00:1c.5: PCI bridge to [bus 06-08]
[ 11.713286] pci 0000:00:1c.5: bridge window [mem 0xf1500000-0xf16fffff]
[ 11.720139] pci 0000:00:1c.6: PCI bridge to [bus 09]
[ 11.725159] pci 0000:00:1c.6: bridge window [mem 0xf1800000-0xf18fffff]
[ 11.732013] pci 0000:00:1c.7: PCI bridge to [bus 0a]
[ 11.737030] pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
[ 11.743186] pci 0000:00:1c.7: bridge window [mem 0xf1700000-0xf17fffff]
[ 11.750038] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 11.755661] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 11.761294] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 11.767619] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 11.773944] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 11.780329] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
[ 11.786630] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff]
[ 11.793042] pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff]
[ 11.799456] pci_bus 0000:00: resource 12 [mem 0xbe200000-0xfeafffff]
[ 11.805870] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 11.811504] pci_bus 0000:02: resource 1 [mem 0xf0400000-0xf14fffff]
[ 11.817831] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 11.823461] pci_bus 0000:04: resource 1 [mem 0xf1a00000-0xf1afffff]
[ 11.829789] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 11.835422] pci_bus 0000:05: resource 1 [mem 0xf1900000-0xf19fffff]
[ 11.841749] pci_bus 0000:06: resource 1 [mem 0xf1500000-0xf16fffff]
[ 11.848075] pci_bus 0000:07: resource 1 [mem 0xf1500000-0xf16fffff]
[ 11.854401] pci_bus 0000:07: resource 5 [mem 0xf1500000-0xf16fffff]
[ 11.860727] pci_bus 0000:08: resource 1 [mem 0xf1500000-0xf15fffff]
[ 11.867056] pci_bus 0000:09: resource 1 [mem 0xf1800000-0xf18fffff]
[ 11.873381] pci_bus 0000:0a: resource 0 [io 0xb000-0xbfff]
[ 11.879013] pci_bus 0000:0a: resource 1 [mem 0xf1700000-0xf17fffff]
[ 11.885342] initcall pcibios_assign_resources+0x0/0xbd returned 0 after 378372 usecs
[ 11.893141] calling sysctl_core_init+0x0/0x2c @ 1
[ 11.898009] initcall sysctl_core_init+0x0/0x2c returned 0 after 13 usecs
[ 11.904756] calling inet_init+0x0/0x296 @ 1
[ 11.909155] NET: Registered protocol family 2
[ 11.913823] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 11.921078] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 11.927716] TCP: Hash tables configured (established 16384 bind 16384)
[ 11.934309] TCP: reno registered
[ 11.937595] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 11.943660] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 11.950273] initcall inet_init+0x0/0x296 returned 0 after 40221 usecs
[ 11.956702] calling ipv4_offload_init+0x0/0x61 @ 1
[ 11.961639] initcall ipv4_offload_init+0x0/0x61 returned 0 after 0 usecs
[ 11.968399] calling af_unix_init+0x0/0x55 @ 1
[ 11.972921] NET: Registered protocol family 1
[ 11.977341] initcall af_unix_init+0x0/0x55 returned 0 after 4329 usecs
[ 11.983913] calling ipv6_offload_init+0x0/0x7f @ 1
[ 11.988853] initcall ipv6_offload_init+0x0/0x7f returned 0 after 0 usecs
[ 11.995612] calling init_sunrpc+0x0/0x69 @ 1
[ 12.000231] RPC: Registered named UNIX socket transport module.
[ 12.006147] RPC: Registered udp transport module.
[ 12.010909] RPC: Registered tcp transport module.
[ 12.015676] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.022175] initcall init_sunrpc+0x0/0x69 returned 0 after 21623 usecs
[ 12.028761] calling pci_apply_final_quirks+0x0/0x117 @ 1
[ 12.034229] pci 0000:00:02.0: Boot video device
[ 12.039317] xen: registering gsi 16 triggering 0 polarity 1
[ 12.044894] xen: --> pirq=16 -> irq=16 (gsi=16)
[ 12.049537] pci 0000:00:14.0: CONFIG_USB_XHCI_HCD is turned off, defaulting to EHCI.
[ 12.057275] pci 0000:00:14.0: USB 3.0 devices will work at USB 2.0 speeds.
[ 12.065195] xen: registering gsi 16 triggering 0 polarity 1
[ 12.070759] Already setup the GSI :16
[ 12.090388] xen: registering gsi 23 triggering 0 polarity 1
[ 12.095965] xen: --> pirq=23 -> irq=23 (gsi=23)
[ 12.116471] xen: registering gsi 18 triggering 0 polarity 1
[ 12.122045] xen: --> pirq=18 -> irq=18 (gsi=18)
[ 12.126.153014] Unpacking initramfs...
[ 13.250266] Freeing initrd memory: 83288K (ffff8800023f7000 - ffff88000754d000)
[ 13.257576] initcall populate_rootfs+0x0/0x112 returned 0 after 1078783 usecs
[ 13.264762] calling pci_iommu_init+0x0/0x41 @ 1
[ 13.269442] initcall pci_iommu_init+0x0/0x41 returned 0 after 0 usecs
[ 13.275940] calling calgary_fixup_tce_spaces+0x0/0x105 @ 1
[ 13.281573] initcall calgary_fixup_tce_spaces+0x0/0x105 returned -19 after 0 usecs
[ 13.289219] calling register_kernel_offset_dumper+0x0/0x1b @ 1
[ 13.295180] initcall register_kernel_offset_dumper+0x0/0x1b returned 0 after 0 usecs
[ 13.302978] calling i8259A_init_ops+0x0/0x21 @ 1
[ 13.307745] initcall i8259A_init_ops+0x0/0x21 returned 0 after 0 usecs
[ 13.314332] calling vsyscall_init+0x0/0x27 @ 1
[ 13.318930] initcall vsyscall_init+0x0/0x27 returned 0 after 4 usecs
[ 13.325339] calling sbf_init+0x0/0xf6 @ 1
[ 13.329498] initcall sbf_init+0x0/0xf6 returned 0 after 0 usecs
[ 13.335478] calling init_tsc_clocksource+0x0/0xc2 @ 1
[ 13.340678] initcall init_tsc_clocksource+0x0/0xc2 returned 0 after 1 usecs
[ 13.347697] calling add_rtc_cmos+0x0/0xb4 @ 1
[ 13.352206] initcall add_rtc_cmos+0x0/0xb4 returned 0 after 2 usecs
[ 13.358530] calling i8237A_init_ops+0x0/0x14 @ 1
[ 13.363297] initcall i8237A_init_ops+0x0/0x14 returned 0 after 0 usecs
[ 13.369884] calling cache_sysfs_init+0x0/0x65 @ 1
[ 13.374987] initcall cache_sysfs_init+0x0/0x65 returned 0 after 244 usecs
[ 13.381768] calling amd_uncore_init+0x0/0x130 @ 1
[ 13.386620] initcall amd_uncore_init+0x0/0x130 returned -19 after 0 usecs
[ 13.393465] calling amd_iommu_pc_init+0x0/0x150 @ 1
[ 13.398494] initcall amd_iommu_pc_init+0x0/0x150 returned -19 after 0 usecs
[ 13.405512] calling intel_uncore_init+0x0/0x3ab @ 1
[ 13.410538] initcall intel_uncore_init+0x0/0x3ab returned -19 after 0 usecs
[ 13.417558] calling rapl_pmu_init+0x0/0x1f8 @ 1
[ 13.422254] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 3 fixed counters 655360 ms ovfl timer
[ 13.432811] initcall rapl_pmu_init+0x0/0x1f8 returned 0 after 10325 usecs
[ 13.439660] calling inject_init+0x0/0x30 @ 1
[ 13.444075] Machine check injector initialized
[ 13.448584] initcall inject_init+0x0/0x30 returned 0 after 4402 usecs
[ 13.455082] calling thermal_throttle_init_device+0x0/0x9c @ 1
[ 13.460975] initcall thermal_throttle_init_device+0x0/0x9c returned 0 after 0 usecs
[ 13.468689] calling microcode_init+0x0/0x1b1 @ 1
[ 13.473648] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x7
[ 13.479774] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 13.488550] initcall microcode_init+0x0/0x1b1 returned 0 after 14739 usecs
[ 13.495482] calling amd_ibs_init+0x0/0x292 @ 1
[ 13.500069] initcall amd_ibs_init+0x0/0x292 returned -19 after 0 usecs
[ 13.506656] calling msr_init+0x0/0x162 @ 1
[ 13.511125] initcall msr_init+0x0/0x162 returned 0 after 216 usecs
[ 13.517296] calling cpuid_init+0x0/0x162 @ 1
[ 13.521909] initcall cpuid_init+0x0/0x162 returned 0 after 195 usecs
[ 13.528255] calling ioapic_init_ops+0x0/0x14 @ 1
[ 13.533019] initcall ioapic_init_ops+0x0/0x14 returned 0 after 0 usecs
[ 13.539607] calling add_pcspkr+0x0/0x40 @ 1
[ 13.544043] initcall add_pcspkr+0x0/0x40 returned 0 after 101 usecs
[ 13.550298] calling start_periodic_check_for_corruption+0x0/0x50 @ 1
[ 13.556796] Scanning for low memory corruption every 60 seconds
[ 13.562772] initcall start_periodic_check_for_corruption+0x0/0x50 returned 0 after 5835 usecs
[ 13.571350] calling sysfb_init+0x0/0x9c @ 1
[ 13.575796] initcall sysfb_init+0x0/0x9c returned 0 after 109 usecs
[ 13.582060] calling audit_classes_init+0x0/0xaf @ 1
[ 13.587097] initcall audit_classes_init+0x0/0xaf returned 0 after 13 usecs
[ 13.594016] calling pt_dump_init+0x0/0x30 @ 1
[ 13.598532] initcall pt_dump_init+0x0/0x30 returned 0 after 8 usecs
[ 13.604850] calling ia32_binfmt_init+0x0/0x14 @ 1
[ 13.609709] initcall ia32_binfmt_init+0x0/0x14 returned 0 after 6 usecs
[ 13.616374] calling proc_execdomains_init+0x0/0x22 @ 1
[ 13.621667] initcall proc_execdomains_init+0x0/0x22 returned 0 after 5 usecs
[ 13.628766] calling ioresources_init+0x0/0x3c @ 1
[ 13.633626] initcall ioresources_init+0x0/0x3c returned 0 after 6 usecs
[ 13.640294] calling uid_cache_init+0x0/0x85 @ 1
[ 13.644989] initcall uid_cache_init+0x0/0x85 returned 0 after 16 usecs
[ 13.651561] calling init_posix_timers+0x0/0x240 @ 1
[ 13.656598] initcall init_posix_timers+0x0/0x240 returned 0 after 12 usecs
[ 13.663518] calling init_posix_cpu_timers+0x0/0xbf @ 1
[ 13.668806] initcall init_posix_cpu_timers+0x0/0xbf returned 0 after 0 usecs
[ 13.675911] calling proc_schedstat_init+0x0/0x22 @ 1
[ 13.681029] initcall proc_schedstat_init+0x0/0x22 returned 0 after 3 usecs
[ 13.687957] calling snapshot_device_init+0x0/0x12 @ 1
[ 13.693282] initcall snapshot_device_init+0x0/0x12 returned 0 after 120 usecs
[ 13.700404] calling irq_pm_init_ops+0x0/0x14 @ 1
[ 13.705169] initcall irq_pm_init_ops+0x0/0x14 returned 0 after 0 usecs
[ 13.711757] calling create_proc_profile+0x0/0x300 @ 1
[ 13.716957] initcall create_proc_profile+0x0/0x300 returned 0 after 0 usecs
[ 13.723975] calling timekeeping_init_ops+0x0/0x14 @ 1
[ 13.729175] initcall timekeeping_init_ops+0x0/0x14 returned 0 after 0 usecs
[ 13.736196] calling init_clocksource_sysfs+0x0/0x69 @ 1
[ 13.741786] initcall init_clocksource_sysfs+0x0/0x69 returned 0 after 212 usecs
[ 13.749086] calling init_timer_list_procfs+0x0/0x2c @ 1
[ 13.754464] initcall init_timer_list_procfs+0x0/0x2c returned 0 after 4 usecs
[ 13.761650] calling alarmtimer_init+0x0/0x15f @ 1
[ 13.766699] initcall alarmtimer_init+0x0/0x15f returned 0 after 191 usecs
[ 13.773473] calling clockevents_init_sysfs+0x0/0xd2 @ 1
[ 13.779148] initcall clockevents_init_sysfs+0x0/0xd2 returned 0 after 295 usecs
[ 13.786477] calling init_tstats_procfs+0x0/0x2c @ 1
[ 13.791507] initcall init_tstats_procfs+0x0/0x2c returned 0 after 4 usecs
[ 13.798349] calling futex_init+0x0/0xf6 @ 1
[ 13.802699] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 13.808840] initcall futex_init+0x0/0xf6 returned 0 after 6012 usecs
[ 13.815249] calling proc_dma_init+0x0/0x22 @ 1
[ 13.819848] initcall proc_dma_init+0x0/0x22 returned 0 after 4 usecs
[ 13.826253] calling proc_modules_init+0x0/0x22 @ 1
[ 13.831197] initcall proc_modules_init+0x0/0x22 returned 0 after 3 usecs
[ 13.837954] calling kallsyms_init+0x0/0x25 @ 1
[ 13.842548] initcall kallsyms_init+0x0/0x25 returned 0 after 3 usecs
[ 13.848961] calling crash_save_vmcoreinfo_init+0x0/0x53f @ 1
[ 13.854775] initcall crash_save_vmcoreinfo_init+0x0/0x53f returned 0 after 9 usecs
[ 13.862393] calling crash_notes_memory_init+0x0/0x36 @ 1
[ 13.867855] initcall crash_notes_memory_init+0x0/0x36 returned 0 after 2 usecs
[ 13.875132] calling pid_namespaces_init+0x0/0x2d @ 1
[ 13.880258] initcall pid_namespaces_init+0x0/0x2d returned 0 after 11 usecs
[ 13.887266] calling ikconfig_init+0x0/0x3c @ 1
[ 13.891862] initcall ikconfig_init+0x0/0x3c returned 0 after 3 usecs
[ 13.898271] calling audit_init+0x0/0x141 @ 1
[ 13.902691] audit: initializing netlink socket (disabled)
[ 13.908177] type=2000 audit(1390621323.439:1): initialized
[ 13.913700] initcall audit_init+0x0/0x141 returned 0 after 10750 usecs
[ 13.920283] calling audit_watch_init+0x0/0x3a @ 1
[ 13.925138] initcall audit_watch_init+0x0/0x3a returned 0 after 1 usecs
[ 13.931810] calling audit_tree_init+0x0/0x49 @ 1
[ 13.936579] initcall audit_tree_init+0x0/0x49 returned 0 after 1 usecs
[ 13.943162] calling init_kprobes+0x0/0x16c @ 1
[ 13.958206] initcall init_kprobes+0x0/0x16c returned 0 after 10204 usecs
[ 13.964891] calling hung_task_init+0x0/0x56 @ 3.993058] initcall init_tracepoints+0x0/0x20 returned 0 after 0 usecs
[ 13.999730] calling init_blk_tracer+0x0/0x5a @ 1
[ 14.004498] initcall init_blk_tracer+0x0/0x5a returned 0 after 1 usecs
[ 14.011083] calling irq_work_init_cpu_notifier+0x0/0x29 @ 1
[ 14.016801] initcall irq_work_init_cpu_notifier+0x0/0x29 returned 0 after 0 usecs
[ 14.024341] calling perf_event_sysfs_init+0x0/0x93 @ 1
[ 14.030158] initcall perf_event_sysfs_init+0x0/0x93 returned 0 after 516 usecs
[ 14.037374] calling init_per_zone_wmark_min+0x0/0xa9 @ 1
[ 14.042841] initcall init_per_zone_wmark_min+0x0/0xa9 returned 0 after 11 usecs
[ 14.050196] calling kswapd_init+0x0/0x76 @ 1
[ 14.054667] initcall kswapd_init+0x0/0x76 returned 0 after 51 usecs
[ 14.060941] calling extfrag_debug_init+0x0/0x7e @ 1
[ 14.065985] initcall extfrag_debug_init+0x0/0x7e returned 0 after 19 usecs
[ 14.072899] calling setup_vmstat+0x0/0xf3 @ 1
[ 14.077421] initcall setup_vmstat+0x0/0xf3 returned 0 after 15 usecs
[ 14.083818] calling mm_sysfs_init+0x0/0x29 @ 1
[ 14.088422] initcall mm_sysfs_init+0x0/0x29 returned 0 after 10 usecs
[ 14.094912] calling mm_compute_batch_init+0x0/0x19 @ 1
[ 14.100199] initcall mm_compute_batch_init+0x0/0x19 returned 0 after 0 usecs
[ 14.107305] calling slab_proc_init+0x0/0x25 @ 1
[ 14.111990] initcall slab_proc_init+0x0/0x25 returned 0 after 3 usecs
[ 14.118486] calling init_reserve_notifier+0x0/0x26 @ 1
[ 14.123771] initcall init_reserve_notifier+0x0/0x26 returned 0 after 0 usecs
[ 14.130877] calling init_admin_reserve+0x0/0x40 @ 1
[ 14.135903] initcall init_admin_reserve+0x0/0x40 returned 0 after 0 usecs
[ 14.142749] calling init_user_reserve+0x0/0x40 @ 1
[ 14.147690] initcall init_user_reserve+0x0/0x40 returned 0 after 0 usecs
[ 14.154451] calling proc_vmalloc_init+0x0/0x25 @ 1
[ 14.159394] initcall proc_vmalloc_init+0x0/0x25 returned 0 after 4 usecs
[ 14.166149] calling procswaps_init+0x0/0x22 @ 1
[ 14.170832] initcall procswaps_init+0x0/0x22 returned 0 after 3 usecs
[ 14.177329] calling init_frontswap+0x0/0x96 @ 1
[ 14.182038] initcall init_frontswap+0x0/0x96 returned 0 after 28 usecs
[ 14.188597] calling hugetlb_init+0x0/0x4c2 @ 1
[ 14.193189] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 14.199693] initcall hugetlb_init+0x0/0x4c2 returned 0 after 6351 usecs
[ 14.206291] calling mmu_notifier_init+0x0/0x12 @ 1
[ 14.211236] initcall mmu_notifier_init+0x0/0x12 returned 0 after 2 usecs
[ 14.217993] calling slab_proc_init+0x0/0x8 @ 1
[ 14.222585] initcall slab_proc_init+0x0/0x8 returned 0 after 0 usecs
[ 14.228998] calling cpucache_init+0x0/0x4b @ 1
[ 14.233592] initcall cpucache_init+0x0/0x4b returned 0 after 0 usecs
[ 14.240004] calling hugepage_init+0x0/0x145 @ 1
[ 14.244685] initcall hugepage_init+0x0/0x145 returned -22 after 0 usecs
[ 14.251356] calling init_cleancache+0x0/0xbc @ 1
[ 14.256151] initcall init_cleancache+0x0/0xbc returned 0 after 27 usecs
[ 14.262796] calling fcntl_init+0x0/0x2a @ 1
[ 14.267141] initcall fcntl_init+0x0/0x2a returned 0 after 11 usecs
[ 14.273371] calling proc_filesystems_init+0x0/0x22 @ 1
[ 14.278661] initcall proc_filesystems_init+0x0/0x22 returned 0 after 4 usecs
[ 14.285763] calling dio_init+0x0/0x2d @ 1
[ 14.289935] initcall dio_init+0x0/0x2d returned 0 after 10 usecs
[ 14.295990] calling fsnotify_mark_init+0x0/0x40 @ 1
[ 14.301042] initcall fsnotify_mark_init+0x0/0x40 returned 0 after 25 usecs
[ 14.307953] calling dnotify_init+0x0/0x7b @ 1
[ 14.312480] initcall dnotify_init+0x0/0x7b returned 0 after 21 usecs
[ 14.318870] calling inotify_user_setup+0x0/0x4b @ 1
[ 14.323912] initcall inotify_user_setup+0x0/0x4b returned 0 after 12 usecs
[ 14.330832] calling aio_setup+0x0/0x7d @ 1
[ 14.335131] initcall aio_setup+0x0/0x7d returned 0 after 52 usecs
[ 14.341231] calling proc_locks_init+0x0/0x22 @ 1
[ 14.346001] initcall proc_locks_init+0x0/0x22 returned 0 after 3 usecs
[ 14.352582] calling init_sys32_ioctl+0x0/0x28 @ 1
[ 14.357479] initcall init_sys32_ioctl+0x0/0x28 returned 0 after 44 usecs
[ 14.364197] calling dquot_init+0x0/0x121 @ 1
[ 14.368616] VFS: Disk quotas dquot_6.5.2
[ 14.372634] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 14.379103] initcall dquot_init+0x0/0x121 returned 0 after 10240 usecs
[ 14.385687] calling init_v2_quota_format+0x0/0x22 @ 1
[ 14.390886] initcall init_v2_quota_format+0x0/0x22 returned 0 after 0 usecs
[ 14.397906] calling quota_init+0x0/0x31 @ 1
[ 14.402259] initcall quota_init+0x0/0x31 returned 0 after 17 usecs
[ 14.408479] calling proc_cmdline_init+0x0/0x22 @ 1
[ 14.413422] initcall proc_cmdline_init+0x0/0x22 returned 0 after 4 usecs
[ 14.420180] calling proc_consoles_init+0x0/0x22 @ 1
[ 14.425209] initcall proc_consoles_init+0x0/0x22 returned 0 after 3 usecs
[ 14.432051] calling proc_cpuinfo_init+0x0/0x22 @ 1
[ 14.436994] initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 3 usecs
[ 14.443752] calling proc_devices_init+0x0/0x22 @ 1
[ 14.448694] initcall proc_devices_init+0x0/0x22 returned 0 after 3 usecs
[ 14.455451] calling proc_interrupts_init+0x0/0x22 @ 1
[ 14.460654] initcall proc_interrupts_init+0x0/0x22 returned 0 after 3 usecs
[ 14.467670] calling proc_loadavg_init+0x0/0x22 @ 1
[ 14.472615] initcall proc_loadavg_init+0x0/0x22 returned 0 after 3 usecs
[ 14.479372] calling proc_meminfo_init+0x0/0x22 @ 1
[ 14.484314] initcall proc_meminfo_init+0x0/0x22 returned 0 after 3 usecs
[ 14.491069] calling proc_stat_init+0x0/0x22 @ 1
[ 14.495753] initcall proc_stat_init+0x0/0x22 returned 0 after 3 usecs
[ 14.502249] calling proc_uptime_init+0x0/0x22 @ 1
[ 14.507105] initcall proc_uptime_init+0x0/0x22 returned 0 after 3 usecs
[ 14.513776] calling proc_version_init+0x0/0x22 @ 1
[ 14.518718] initcall proc_version_init+0x0/0x22 returned 0 after 3 usecs
[ 14.525476] calling proc_softirqs_init+0x0/0x22 @ 1
[ 14.530505] initcall proc_softirqs_init+0x0/0x22 returned 0 after 3 usecs
[ 14.537348] calling proc_kcore_init+0x0/0xb5 @ 1
[ 14.542125] initcall proc_kcore_init+0x0/0xb5 returned 0 after 10 usecs
[ 14.548789] calling vmcore_init+0x0/0x5cb @ 1
[ 14.553294] initcall vmcore_init+0x0/0x5cb returned 0 after 0 usecs
[ 14.559620] calling proc_kmsg_init+0x0/0x25 @ 1
[ 14.564304] initcall proc_kmsg_init+0x0/0x25 returned 0 after 3 usecs
[ 14.570800] calling proc_page_init+0x0/0x42 @ 1
[ 14.575487] initcall proc_page_init+0x0/0x42 returned 0 after 6 usecs
[ 14.581981] calling init_devpts_fs+0x0/0x62 @ 1
[ 14.586705] initcall init_devpts_fs+0x0/0x62 returned 0 after 43 usecs
[ 14.593246] calling init_hugetlbfs_fs+0x0/0x15d @ 1
[ 14.598346] initcall init_hugetlbfs_fs+0x0/0x15d returned 0 after 72 usecs
[ 14.605207] calling init_fat_fs+0x0/0x4f @ 1
[ 14.609646] initcall init_fat_fs+0x0/0x4f returned 0 after 20 usecs
[ 14.615953] calling init_vfat_fs+0x0/0x12 @ 1
[ 14.620459] initcall init_vfat_fs+0x0/0x12 returned 0 after 0 usecs
[ 14.626785] calling init_msdos_fs+0x0/0x12 @ 1
[ 14.631380] initcall init_msdos_fs+0x0/0x12 returned 0 after 0 usecs
[ 14.637791] calling init_iso9660_fs+0x0/0x70 @ 1
[ 14.642581] initcall init_iso9660_fs+0x0/0x70 returned 0 after 23 usecs
[ 14.649233] calling init_nfs_fs+0x0/0x16c @ 1
[ 14.653933] initcall init_nfs_fs+0x0/0x16c returned 0 after 190 usecs
[ 14.660363] calling init_nfs_v2+0x0/0x14 @ 1
[ 14.664781] initcall init_nfs_v2+0x0/0x14 returned 0 after 0 usecs
[ 14.671021] calling init_nfs_v3+0x0/0x14 @ 1
[ 14.675439] initcall init_nfs_v3+0x0/0x14 returned 0 after 0 usecs
[ 14.681679] calling init_nfs_v4+0x0/0x3b @ 1
[ 14.686098] NFS: Registering the id_resolver key type
[ 14.691225] Key type id_resolver registered
[ 14.695457] Key type id_legacy registered
[ 14.699535] initcall init_nfs_v4+0x0/0x3b returned 0 after 13121 usecs
[ 14.706118] calling init_nlm+0x0/0x4c @ 1
[ 14.710286] initcall init_nlm+0x0/0x4c returned 0 after 7 usecs
[ 14.716257] calling init_nls_cp437+0x0/0x12 @ 1
[ 14.720937] initcall init_nls_cp437+0x0/0x12 returned 0 after 0 usecs
[ 14.727437] calling init_nls_ascii+0x0/0x12 @ 1
[ 14.732117] initcall init_nls_ascii+0x0/0x12 returned 0 after 0 usecs
[ 14.738617] calling init_nls_iso8859_1+0x0/0x12 @ 1
[ 14.743642] initcall init_nls_iso8859_1+0x0/0x12 returned 0 after 0 usecs
[ 14.750489] calling init_nls_utf8+0x0/0x2b @ 1
[ 14.755082] initcall init_nls_utf8+0x0/0x2b returned 0 after 0 usecs
[ 14.761496] calling init_ntfs_fs+0x0/0x1d1 @ 1
[ 14.766090] NTFS driver 2.1.30 [Flags: R/W].
[ 14.770476] initcall init_ntfs_fs+0x0/0x1d1 returned 0 after 4282 usecs
[ 14.777097] calling init_autofs4_fs+0x0/0x2a @ 1
[ 14.782028] initcall init_autofs4_fs+0x0/0x2a returned 0 after 129 usecs
[ 14.788725] calling init_pstore_fs+0x0/0x53 @ 1
[ 14.793406] initcall init_pstore_fs+0x0/0x53 returned 0 after 11 usecs
[ 14.799982] calling ipc_init+0x0/0x2f @ 1
[ 14.804149] msgmni has been set to 3857
[ 14.808051] initcall ipc_init+0x0/0x2f returned 0 after 3817 usecs
[ 14.814281] calling ipc_sysctl_init+0x0/0x14 @ 1
[ 14.819054] initcall ipc_sysctl_init+0x0/0x14 returned 0 after 7 usecs
[ 14.825633] calling init_mqueue_fs+0x0/0xa2 @ 1
[ 14.830373] initcall init_mqueue_fs+0x0/0xa2 returned 0 after 57 usecs
[ 14.836900] calling key_proc_init+0x0/0x5e @ 1
[ 14.841500] initcall key_proc_init+0x0/0x5e returned 0 after 7 usecs
[ 14.847906] calling selinux_nf_ip_init+0x0/0x69 @ 1
[ 14.852932] SELinux: Registering netfilter hooks
[ 14.857834] initcall selinux_nf_ip_init+0x0/0x69 returned 0 after 4785 usecs
[ 14.864867] calling init_sel_fs+0x0/0xa5 @ 1
[ 14.869649] initcall init_sel_fs+0x0/0xa5 returned 0 after 353 usecs
[ 14.875986] calling selnl_init+0x0/0x56 @ 1
[ 14.880333] initcall selnl_init+0x0/0x56 returned 0 after 15 usecs
[ 14.886559] calling sel_netif_init+0x0/0x5c @ 1
[ 14.891241] initcall sel_netif_init+0x0/0x5c returned 0 after 3 usecs
[ 14.897738] calling sel_netnode_init+0x0/0x6a @ 1
[ 14.902593] initcall sel_netnode_init+0x0/0x6a returned 0 after 1 usecs
[ 14.909265] calling sel_netport_init+0x0/0x6a @ 1
[ 14.914122] initcall sel_netport_init+0x0/0x6a returned 0 after 2 usecs
[ 14.920791] calling aurule_init+0x0/0x2d @ 1
[ 14.925212] initcall aurule_init+0x0/0x2d returned 0 after 1 usecs
[ 14.931449] calling crypto_wq_init+0x0/0x33 @ 1
[ 14.936159] initcall crypto_wq_init+0x0/0x33 returned 0 after 29 usecs
[ 14.942718] calling crypto_algapi_init+0x0/0xd @ 1
[ 14.947661] initcall crypto_algapi_init+0x0/0xd returned 0 after 4 usecs
[ 14.954416] calling chainiv_module_init+0x0/0x12 @ 1
[ 14.959529] initcall chainiv_module_init+0x0/0x12 returned 0 after 0 usecs
[ 14.966463] calling eseqiv_module_init+0x0/0x12 @ 1
[ 14.971490] initcall eseqiv_module_init+0x0/0x12 returned 0 after 0 usecs
[ 14.978336] calling hmac_module_init+0x0/0x12 @ 1
[ 14.983189] initcall hmac_module_init+0x0/0x12 returned 0 after 0 usecs
[ 14.989862] calling md5_mod_init+0x0/0x12 @ 1
[ 14.994400] initcall md5_mod_init+0x0/0x12 returned 0 after 31 usecs
[ 15.000782] calling sha1_generic_mod_init+0x0/0x12 @ 1
[ 15.006096] initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 26 usecs
[ 15.013261] calling crypto_cbc_module_init+0x0/0x12 @ 1
[ 15.018634] initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 0 usecs
[ 15.025827] calling des_generic_mod_init+0x0/0x17 @ 1
[ 15.031078] initcall des_generic_mod_init+0x0/0x17 returned 0 after 50 usecs
[ 15.038135] calling aes_init+0x0/0x12 @ 1
[ 15.042321] initcall aes_init+0x0/0x12 returned 0 after 27 usecs
[ 15.048362] calling zlib_mod_init+0x0/0x12 @ 1
[ 15.052981] initcall zlib_mod_init+0x0/0x12 returned 0 after 26 usecs
[ 15.059454] calling crypto_authenc_module_init+0x0/0x12 @ 1
[ 15.065177] initcall crypto_authenc_module_init+0x0/0x12 returned 0 after 0 usecs
[ 15.072716] calling crypto_authenc_esn_module_init+0x0/0x12 @ 1
[ 15.078780] initcall crypto_authenc_esn_module_init+0x0/0x12 returned 0 after 0 usecs
[ 15.086666] calling krng_mod_init+0x0/0x12 @ 1
[ 15.091288] initcall krng_mod_init+0x0/0x12 returned 0 after 26 usecs
[ 15.097762] calling proc_genhd_init+0x0/0x3c @ 1
[ 15.102537] initcall proc_genhd_init+0x0/0x3c returned 0 after 7 usecs
[ 15.109113] calling bsg_init+0x0/0x12e @ 1
[ 15.113436] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 15.120822] initcall bsg_init+0x0/0x12e returned 0 after 7288 usecs
[ 15.127146] calling noop_init+0x0/0x12 @ 1
[ 15.131394] io scheduler noop registered
[ 15.135379] initcall noop_init+0x0/0x12 returned 0 after 3890 usecs
[ 15.141705] calling deadline_init+0x0/0x12 @ 1
[ 15.146298] io scheduler deadline registered
[ 15.150632] initcall deadline_init+0x0/0x12 returned 0 after 4231 usecs
[ 15.157306] calling cfq_init+0x0/0x8b @ 1
[ 15.161486] io scheduler cfq registered (default)
[ 15.166232] initcall cfq_init+0x0/0x8b returned 0 after 4655 usecs
[ 15.172471] calling percpu_counter_startup+0x0/0x38 @ 1
[ 15.177845] initcall percpu_counter_startup+0x0/0x38 returned 0 after 0 usecs
[ 15.185038] calling pci_proc_init+0x0/0x6a @ 1
[ 15.189814] initcall pci_proc_init+0x0/0x6a returned 0 after 179 usecs
[ 15.196330] calling pcie_portdrv_init+0x0/0x7a @ 1
[ 15.202004] xen: registering gsi 16 triggering 0 polarity 1
[ 15.207567] Already setup the GSI :16
[ 15.212106] xen: registering gsi 16 triggering 0 polarity 1
[ 15.217670] Already setup the GSI :16
[ 15.222185] xen: registering gsi 16 triggering 0 polarity 1
[ 15.227750] Already setup the GSI :16
[ 15.232119] xen: registering gsi 19 triggering 0 polarity 1
[ 15.237694] xen: --> pirq=19 -> irq=19 (gsi=19)
[ 15.242940] xen: registering gsi 17 triggering 0 polarity 1
[ 15.248516] xen: --> pirq=17 -> irq=17 (gsi=17)
[ 15.253843] xen: registering gsi 19 triggering 0 polarity 1
[ 15.259406] Already setup the GSI :19
[ 15.263326] initcall pcie_portdrv_init+0x0/0x7a returned 0 after 60600 usecs
[ 15.270362] calling aer_service_init+0x0/0x2b @ 1
[ 15.275286] initcall aer_service_init+0x0/0x2b returned 0 after 72 usecs
[ 15.281972] calling pci_hotplug_init+0x0/0x1d @ 1
[ 15.286826] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 15.292458] initcall pci_hotplug_init+0x0/0x1d returned 0 after 5499 usecs
[ 15.299392] calling pcied_init+0x0/0x79 @ 1
[ 15.303927] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 15.310533] initcall pcied_init+0x0/0x79 returned 0 after 6648 usecs
[ 15.316944] calling pcifront_init+0x0/0x3f @ 1
[ 15.321533] initcall pcifront_init+0x0/0x3f returned -19 after 0 usecs
[ 15.328120] calling genericbl_driver_init+0x0/0x14 @ 1
[ 15.333520] initcall genericbl_driver_init+0x0/0x14 returned 0 after 109 usecs
[ 15.340731] calling cirrusfb_init+0x0/0xcc @ 1
[ 15.345415] initcall cirrusfb_init+0x0/0xcc returned 0 after 89 usecs
[ 15.351841] calling efifb_driver_init+0x0/0x14 @ 1
[ 15.356856] initcall efifb_driver_init+0x0/0x14 returned 0 after 72 usecs
[ 15.363630] calling intel_idle_init+0x0/0x331 @ 1
[ 15.368482] intel_idle: MWAIT substates: 0x42120
[ 15.373163] intel_idle: v0.4 model 0x3C
[ 15.377060] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 15.382958] intel_idle: intel_idle yielding to none
[ 15.387632] initcall intel_idle_init+0x0/0x331 returned -19 after 18700 usecs
[ 15.395086] calling acpi_reserve_resources+0x0/0xeb @ 1
[ 15.400467] initcall acpi_reserve_resources+0x0/0xeb returned 0 after 8 usecs
[ 15.407653] calling acpi_ac_init+0x0/0x2a @ 1
[ 15.412233] initcall acpi_ac_init+0x0/0x2a returned 0 after 73 usecs
[ 15.418582] calling acpi_button_driver_init+0x0/0x12 @ 1
[ 15.424317] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 15.432487] ACPI: Power Button [PWRB]
[ 15.436478] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 15.443865] ACPI: Power Button [PWRF]
[ 15.447660] initcall acpi_button_driver_init+0x0/0x12 returned 0 after 23074 usecs
[ 15.455214] calling acpi_fan_driver_init+0x0/0x12 @ 1
[ 15.460653] ACPI: Fan [FAN0] (off)
[ 15.464281] ACPI: Fan [FAN1] (off)
[ 15.467894] ACPI: Fan [FAN2] (off)
[ 15.471509] ACPI: Fan [FAN3] (off)
[ 15.475111] ACPI: Fan [FAN4] (off)
[ 15.478582] initcall acpi_fan_driver_init+0x0/0x12 returned 0 after 17742 usecs
[ 15.485881] calling acpi_processor_driver_init+0x0/0x43 @ 1
[ 15.504111] ACPI Error: [\PETE] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[ 15.512533] ACPI Error: Method parse/execution failed [\_PR_.CPU0._TPC] (Node ffff8800784b2ce0), AE_NOT_FOUND (20131115/psparse-536)
[ 15.528192] Monitor-Mwait will be used to enter C-1 state
[ 15.533579] Monitor-Mwait will be used to enter C-2 state
[ 15.539239] Warning: Processor Platform Limit not supported.
[ 15.544887] initcall acpi_processor_driver_init+0x0/0x43 returned 0 after 52040 usecs
[ 15.552770] calling acpi_thermal_init+0x0/0x42 @ 1
[ 15.560984] thermal LNXTHERM:00: registered as thermal_zone0
[ 15.566629] ACPI: Thermal Zone [TZ00] (28 C)
[ 15.573132] thermal LNXTHERM:01: registered as thermal_zone1
[ 15.578785] ACPI: Thermal Zone [TZ01] (30 C)
[ 15.58345ry_init+0x0/0x16 @ 1
[ 15.595431] initcall acpi_battery_init+0x0/0x16 returned 0 after 2 usecs
[ 15.602188] calling acpi_hed_driver_init+0x0/0x12 @ 1
[ 15.607435] calling 1_acpi_battery_init_async+0x0/0x35 @ 6
[ 15.613155] initcall acpi_hed_driver_init+0x0/0x12 returned 0 after 5630 usecs
[ 15.620360] calling erst_init+0x0/0x2fc @ 1
[ 15.624736] ERST: Error Record Serialization Table (ERST) support is initialized.
[ 15.632240] pstore: Registered erst as persistent store backend
[ 15.638212] initcall erst_init+0x0/0x2fc returned 0 after 13202 usecs
[ 15.644713] calling ghes_init+0x0/0x173 @ 1
[ 15.649195] initcall 1_acpi_battery_init_async+0x0/0x35 returned 0 after 35327 usecs
[ 15.657638] \_SB_:_OSC request failed
[ 15.661294] _OSC request data:1 1 0
[ 15.664932] \_SB_:_OSC invalid UUID
[ 15.668484] _OSC request data:1 1 0
[ 15.672121] GHES: APEI firmware first mode is enabled by APEI bit.
[ 15.678364] initcall ghes_init+0x0/0x173 returned 0 after 28630 usecs
[ 15.684863] calling einj_init+0x0/0x522 @ 1
[ 15.689259] EINJ: Error INJection is initialized.
[ 15.693964] initcall einj_init+0x0/0x522 returned 0 after 4655 usecs
[ 15.700377] calling ioat_init_module+0x0/0xb1 @ 1
[ 15.705229] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 15.711278] initcall ioat_init_module+0x0/0xb1 returned 0 after 5906 usecs
[ 15.718161] calling virtio_mmio_init+0x0/0x14 @ 1
[ 15.723070] initcall virtio_mmio_init+0x0/0x14 returned 0 after 72 usecs
[ 15.729756] calling virtio_balloon_driver_init+0x0/0x12 @ 1
[ 15.735547] initcall virtio_balloon_driver_init+0x0/0x12 returned 0 after 69 usecs
[ 15.743105] calling xenbus_probe_initcall+0x0/0x39 @ 1
[ 15.748388] initcall xenbus_probe_initcall+0x0/0x39 returned 0 after 0 usecs
[ 15.755494] calling xenbus_init+0x0/0x3d @ 1
[ 15.760053] initcall xenbus_init+0x0/0x3d returned 0 after 134 usecs
[ 15.766398] calling xenbus_backend_init+0x0/0x51 @ 1
[ 15.771634] initcall xenbus_backend_init+0x0/0x51 returned 0 after 121 usecs
[ 15.778671] calling gntdev_init+0x0/0x4d @ 1
[ 15.783281] initcall gntdev_init+0x0/0x4d returned 0 after 155 usecs
[ 15.789626] calling gntalloc_init+0x0/0x3d @ 1
[ 15.794346] initcall gntalloc_init+0x0/0x3d returned 0 after 127 usecs
[ 15.800865] calling hypervisor_subsys_init+0x0/0x25 @ 1
[ 15.806237] initcall hypervisor_subsys_init+0x0/0x25 returned 0 after 0 usecs
[ 15.813428] calling hyper_sysfs_init+0x0/0x103 @ 1
[ 15.818434] initcall hyper_sysfs_init+0x0/0x103 returned 0 after 64 usecs
[ 15.825214] calling platform_pci_module_init+0x0/0x1b @ 1
[ 15.830854] initcall platform_pci_module_init+0x0/0x1b returned 0 after 90 usecs
[ 15.838232] calling xen_late_init_mcelog+0x0/0x3d @ 1
[ 15.843625] initcall xen_late_init_mcelog+0x0/0x3d returned 0 after 190 usecs
[ 15.850747] calling xen_pcibk_init+0x0/0x13f @ 1
[ 15.855539] xen_pciback: backend is vpci
[ 15.859576] initcall xen_pcibk_init+0x0/0x13f returned 0 after 3968 usecs
[ 15.866358] calling xen_acpi_processor_init+0x0/0x24b @ 1
[ 15.872671] xen_acpi_processor: Uploading Xen processor PM info
(XEN) [2014-01-25 03:42:05] Set CPU acpi_id(1) cpuid(0) Px State info:
(XEN) [2014-01-25 03:42:05] _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0
(XEN) [2014-01-25 03:42:05] _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0
(XEN) [2014-01-25 03:42:05] _PSS: state_count=16
(XEN) [2014-01-25 03:42:05] State0: 3401MHz 84000mW 10us 10us 0x2600 0x2600
(XEN) [2014-01-25 03:42:05] State1: 3400MHz 84000mW 10us 10us 0x2200 0x2200
(XEN) [2014-01-25 03:42:05] State2: 3200MHz 77169mW 10us 10us 0x2000 0x2000
(XEN) [2014-01-25 03:42:05] State3: 3000MHz 70587mW 10us 10us 0x1e00 0x1e00
(XEN) [2014-01-25 03:42:05] State4: 2800MHz 64262mW 10us 10us 0x1c00 0x1c00
(XEN) [2014-01-25 03:42:05] State5: 2700MHz 61182mW 10us 10us 0x1b00 0x1b00
(XEN) [2014-01-25 03:42:05] State6: 2500MHz 55201mW 10us 10us 0x1900 0x1900
(XEN) [2014-01-25 03:42:05] State7: 2300MHz 49464mW 10us 10us 0x1700 0x1700
(XEN) [2014-01-25 03:42:05] State8: 2100MHz 43946mW 10us 10us 0x1500 0x1500
(XEN) [2014-01-25 03:42:05] State9: 1900MHz 38654mW 10us 10us 0x1300 0x1300
(XEN) [2014-01-25 03:42:05] State10: 1700MHz 34277mW 10us 10us 0x1100 0x1100
(XEN) [2014-01-25 03:42:05] State11: 1500MHz 29407mW 10us 10us 0xf00 0xf00
(XEN) [2014-01-25 03:42:05] State12: 1400MHz 27053mW 10us 10us 0xe00 0xe00
(XEN) [2014-01-25 03:42:05] State13: 1200MHz 22509mW 10us 10us 0xc00 0xc00
(XEN) [2014-01-25 03:42:05] State14: 1000MHz 18167mW 10us 10us 0xa00 0xa00
(XEN) [2014-01-25 03:42:05] State15: 800MHz 14031mW 10us 10us 0x800 0x800
(XEN) [2014-01-25 03:42:05] _PSD: num_entries=5 rev=0 domain=0 coord_type=254 num_processors=8
(XEN) [2014-01-25 03:42:05] _PPC: 0
(XEN) [2014-01-25 03:42:05] xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space
(XEN) [2014-01-25 03:42:05] max_freq: 3401000 second_max_freq: 3400000
(XEN) [2014-01-25 03:42:05] CPU0: Turbo Mode detected and enabled
(XEN) [2014-01-25 03:42:05] CPU 0 initialization completed
(XEN) [2014-01-25 03:42:05] Set CPU acpi_id(2) cpuid(2) Px State info:
(XEN) [2014-01-25 03:42:05] _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0
(XEN) [2014-01-25 03:42:05] _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0
(XEN) [2014-01-25 03:42:05] _PSS: state_count=16
(XEN) [2014-01-25 03:42:05] State0: 3401MHz 84000mW 10us 10us 0x2600 0x2600
(XEN) [2014-01-25 03:42:05] State1: 3400MHz 84000mW 10us 10us 0x2200 0x2200
(XEN) [2014-01-25 03:42:05] State2: 3200MHz 77169mW 10us 10us 0x2000 0x2000
(XEN) [2014-01-25 03:42:05] State3: 3000MHz 70587mW 10us 10us 0x1e00 0x1e00
(XEN) [2014-01-25 03:42:05] State4: 2800MHz 64262mW 10us 10us 0x1c00 0x1c00
(XEN) [2014-01-25 03:42:05] State5: 2700MHz 61182mW 10us 10us 0x1b00 0x1b00
(XEN) [2014-01-25 03:42:05] State6: 2500MHz 55201mW 10us 10us 0x1900 0x1900
(XEN) [2014-01-25 03:42:05] State7: 2300MHz 49464mW 10us 10us 0x1700 0x1700
(XEN) [2014-01-25 03:42:05] State8: 2100MHz 43946mW 10us 10us 0x1500 0x1500
(XEN) [2014-01-25 03:42:05] State9: 1900MHz 38654mW 10us 10us 0x1300 0x1300
(XEN) [2014-01-25 03:42:05] State10: 1700MHz 34277mW 10us 10us 0x1100 0x1100
(XEN) [2014-01-25 03:42:05] State11: 1500MHz 29407mW 10us 10us 0xf00 0xf00
(XEN) [2014-01-25 03:42:05] State12: 1400MHz 27053mW 10us 10us 0xe00 0xe00
(XEN) [2014-01-25 03:42:05] State13: 1200MHz 22509mW 10us 10us 0xc00 0xc00
(XEN) [2014-01-25 03:42:05] State14: 1000MHz 18167mW 10us 10us 0xa00 0xa00
(XEN) [2014-01-25 03:42:05] State15: 800MHz 14031mW 10us 10us 0x800 0x800
(XEN) [2014-01-25 03:42:05] _PSD: num_entries=5 rev=0 domain=0 coord_type=254 num_processors=8
(XEN) [2014-01-25 03:42:05] _PPC: 0
(XEN) [2014-01-25 03:42:05] xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space
(XEN) [2014-01-25 03:42:05] max_freq: 3401000 second_max_freq: 3400000
(XEN) [2014-01-25 03:42:05] CPU2: Turbo Mode detected and enabled
(XEN) [2014-01-25 03:42:05] CPU 2 initialization completed
(XEN) [2014-01-25 03:42:05] Set CPU acpi_id(3) cpuid(4) Px State info:
(XEN) [2014-01-25 03:42:05] _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0
(XEN) [2014-01-25 03:42:05] _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0
(XEN) [2014-01-25 03:42:05] _PSS: state_count=16
(XEN) [2014-01-25 03:42:05] State0: 3401MHz 84000mW 10us 10us 0x2600 0x2600
(XEN) [2014-01-25 03:42:05] State1: 3400MHz 84000mW 10us 10us 0x2200 0x2200
(XEN) [2014-01-25 03:42:05] State2: 3200MHz 77169mW 10us 10us 0x2000 0x2000
(XEN) [2014-01-25 03:42:05] State3: 3000MHz 70587mW 10us 10us 0x1e00 0x1e00
(XEN) [2014-01-25 03:42:05] State4: 2800MHz 64262mW 10us 10us 0x1c00 0x1c00
(XEN) [2014-01-25 03:42:05] State5: 2700MHz 61182mW 10us 10us 0x1b00 0x1b00
(XEN) [2014-01-25 03:42:05] State6: 2500MHz 55201mW 10us 10us 0x1900 0x1900
(XEN) [2014-01-25 03:42:05] State7: 2300MHz 49464mW 10us 10us 0x1700 0x1700
(XEN) [2014-01-25 03:42:05] State8: 2100MHz 43946mW 10us 10us 0x1500 0x1500
(XEN) [2014-01-25 03:42:05] State9: 1900MHz 38654mW 10us 10us 0x1300 0x1300
(XEN) [2014-01-25 03:42:05] State10: 1700MHz 34277mW 10us 10us 0x1100 0x1100
(XEN) [2014-01-25 03:42:05] State11: 1500MHz 29407mW 10us 10us 0xf00 0xf00
(XEN) [2014-01-25 03:42:05] State12: 1400MHz 27053mW 10us 10us 0xe00 0xe00
(XEN) [2014-01-25 03:42:05] State13: 1200MHz 22509mW 10us 10us 0xc00 0xc00
(XEN) [2014-01-25 03:42:05] State14: 1000MHz 18167mW 10us 10us 0xa00 0xa00
(XEN) [2014-01-25 03:42:05] State15: 800MHz 14031mW 10us 10us 0x800 0x800
(XEN) [2014-01-25 03:42:05] _PSD: num_entries=5 rev=0 domain=0 coord_type=254 num_processors=8
(XEN) [2014-01-25 03:42:05] _PPC: 0
(XEN) [2014-01-25 03:42:05] xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space
(XEN) [2014-01-25 03:42:05] max_freq: 3401000 second_max_freq: 3400000
(XEN) [2014-01-25 03:42:05] CPU4: Turbo Mode detected and enabled
(XEN) [2014-01-25 03:42:05] CPU 4 initialization completed
(XEN) [2014-01-25 03:42:05] Set CPU acpi_id(4) cpuid(6) Px State info:
(XEN) [2014-01-25 03:42:05] _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0
(XEN) [2014-01-25 03:42:05] _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0
(XEN) [2014-01-25 03:42:05] _PSS: state_count=16
(XEN) [2014-01-25 03:42:05] State0: 3401MHz 84000mW 10us 10us 0x2600 0x2600
(XEN) [2014-01-25 03:42:05] State1: 3400MHz 84000mW 10us 10us 0x2200 0x2200
(XEN) [2014-01-25 03:42:05] State2: 3200MHz 77169mW 10us 10us 0x2000 0x2000
(XEN) [2014-01-25 03:42:05] State3: 3000MHz 70587mW 10us 10us 0x1e00 0x1e00
(XEN) [2014-01-25 03:42:06] State4: 2800MHz 64262mW 10us 10us 0x1c00 0x1c00
(XEN) [2014-01-25 03:42:06] State5: 2700MHz 61182mW 10us 10us 0x1b00 0x1b00
(XEN) [2014-01-25 03:42:06] State6: 2500MHz 55201mW 10us 10us 0x1900 0x1900
(XEN) [2014-01-25 03:42:06] State7: 2300MHz 49464mW 10us 10us 0x1700 0x1700
(XEN) [2014-01-25 03:42:06] State8: 2100MHz 43946mW 10us 10us 0x1500 0x1500
(XEN) [2014-01-25 03:42:06] State9: 1900MHz 38654mW 10us 10us 0x1300 0x1300
(XEN) [2014-01-25 03:42:06] State10: 1700MHz 34277mW 10us 10us 0x1100 0x1100
(XEN) [2014-01-25 03:42:06] State11: 1500MHz 29407mW 10us 10us 0xf00 0xf00
(XEN) [2014-01-25 03:42:06] State12: 1400MHz 27053mW 10us 10us 0xe00 0xe00
(XEN) [2014-01-25 03:42:06] State13: 1200MHz 22509mW 10us 10us 0xc00 0xc00
(XEN) [2014-01-25 03:42:06] State14: 1000MHz 18167mW 10us 10us 0xa00 0xa00
(XEN) [2014-01-25 03:42:06] State15: 800MHz 14031mW 10us 10us 0x800 0x800
(XEN) [2014-01-25 03:42:06] _PSD: num_entries=5 rev=0 domain=0 coord_type=254 num_processors=8
(XEN) [2014-01-25 03:42:06] _PPC: 0
(XEN) [2014-01-25 03:42:06] xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space
(XEN) [2014-01-25 03:42:06] max_freq: 3401000 second_max_freq: 3400000
(XEN) [2014-01-25 03:42:06] CPU6: Turbo Mode detected and enabled
(XEN) [2014-01-25 03:42:06] CPU 6 initialization completed
(XEN) [2014-01-25 03:42:06] Set CPU acpi_id(5) cpuid(1) Px State info:
(XEN) [2014-01-25 03:42:06] _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0
(XEN) [2014-01-25 03:42:06] _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0
(XEN) [2014-01-25 03:42:06] _PSS: state_count=16
(XEN) [2014-01-25 03:42:06] State0: 3401MHz 84000mW 10us 10us 0x2600 0x2600
(XEN) [2014-01-25 03:42:06] State1: 3400MHz 84000mW 10us 10us 0x2200 0x2200
(XEN) [2014-01-25 03:42:06] State2: 3200MHz 77169mW 10us 10us 0x2000 0x2000
(XEN) [2014-01-25 03:42:06] State3: 3000MHz 70587mW 10us 10us 0x1e00 0x1e00
(XEN) [2014-01-25 03:42:06] State4: 2800MHz 64262mW 10us 10us 0x1c00 0x1c00
(XEN) [2014-01-25 03:42:06] State5: 2700MHz 61182mW 10us 10us 0x1b00 0x1b00
(XEN) [2014-01-25 03:42:06] State6: 2500MHz 55201mW 10us 10us 0x1900 0x1900
(XEN) [2014-01-25 03:42:06] State7: 2300MHz 49464mW 10us 10us 0x1700 0x1700
(XEN) [2014-01-25 03:42:06] State8: 2100MHz 43946mW 10us 10us 0x1500 0x1500
(XEN) [2014-01-25 03:42:06] State9: 1900MHz 38654mW 10us 10us 0x1300 0x1300
(XEN) [2014-01-25 03:42:06] State10: 1700MHz 34277mW 10us 10us 0x1100 0x1100
(XEN) [2014-01-25 03:42:06] State11: 1500MHz 29407mW 10us 10us 0xf00 0xf00
(XEN) [2014-01-25 03:42:06] State12: 1400MHz 27053mW 10us 10us 0xe00 0xe00
(XEN) [2014-01-25 03:42:06] State13: 1200MHz 22509mW 10us 10us 0xc00 0xc00
(XEN) [2014-01-25 03:42:06] State14: 1000MHz 18167mW 10us 10us 0xa00 0xa00
(XEN) [2014-01-25 03:42:06] State15: 800MHz 14031mW 10us 10us 0x800 0x800
(XEN) [2014-01-25 03:42:06] _PSD: num_entries=5 rev=0 domain=0 coord_type=254 num_processors=8
(XEN) [2014-01-25 03:42:06] _PPC: 0
(XEN) [2014-01-25 03:42:06] xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space
(XEN) [2014-01-25 03:42:06] max_freq: 3401000 second_max_freq: 3400000
(XEN) [2014-01-25 03:42:06] CPU1: Turbo Mode detected and enabled
(XEN) [2014-01-25 03:42:06] CPU 1 initialization completed
(XEN) [2014-01-25 03:42:06] Set CPU acpi_id(6) cpuid(3) Px State info:
(XEN) [2014-01-25 03:42:06] _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0
(XEN) [2014-01-25 03:42:06] _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0
(XEN) [2014-01-25 03:42:06] _PSS: state_count=16
(XEN) [2014-01-25 03:42:06] State0: 3401MHz 84000mW 10us 10us 0x2600 0x2600
(XEN) [2014-01-25 03:42:06] State1: 3400MHz 84000mW 10us 10us 0x2200 0x2200
(XEN) [2014-01-25 03:42:06] State2: 3200MHz 77169mW 10us 10us 0x2000 0x2000
(XEN) [2014-01-25 03:42:06] State3: 3000MHz 70587mW 10us 10us 0x1e00 0x1e00
(XEN) [2014-01-25 03:42:06] State4: 2800MHz 64262mW 10us 10us 0x1c00 0x1c00
(XEN) [2014-01-25 03:42:06] State5: 2700MHz 61182mW 10us 10us 0x1b00 0x1b00
(XEN) [2014-01-25 03:42:06] State6: 2500MHz 55201mW 10us 10us 0x1900 0x1900
(XEN) [2014-01-25 03:42:06] State7: 2300MHz 49464mW 10us 10us 0x1700 0x1700
(XEN) [2014-01-25 03:42:06] State8: 2100MHz 43946mW 10us 10us 0x1500 0x1500
(XEN) [2014-01-25 03:42:06] State9: 1900MHz 38654mW 10us 10us 0x1300 0x1300
(XEN) [2014-01-25 03:42:06] State10: 1700MHz 34277mW 10us 10us 0x1100 0x1100
(XEN) [2014-01-25 03:42:06] State11: 1500MHz 29407mW 10us 10us 0xf00 0xf00
(XEN) [2014-01-25 03:42:06] State12: 1400MHz 27053mW 10us 10us 0xe00 0xe00
(XEN) [2014-01-25 03:42:06] State13: 1200MHz 22509mW 10us 10us 0xc00 0xc00
(XEN) [2014-01-25 03:42:06] State14: 1000MHz 18167mW 10us 10us 0xa00 0xa00
(XEN) [2014-01-25 03:42:06] State15: 800MHz 14031mW 10us 10us 0x800 0x800
(XEN) [2014-01-25 03:42:06] _PSD: num_entries=5 rev=0 domain=0 coord_type=254 num_processors=8
(XEN) [2014-01-25 03:42:06] _PPC: 0
(XEN) [2014-01-25 03:42:06] xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space
(XEN) [2014-01-25 03:42:06] max_freq: 3401000 second_max_freq: 3400000
(XEN) [2014-01-25 03:42:06] CPU3: Turbo Mode detected and enabled
(XEN) [2014-01-25 03:42:06] CPU 3 initialization completed
(XEN) [2014-01-25 03:42:06] Set CPU acpi_id(7) cpuid(5) Px State info:
(XEN) [2014-01-25 03:42:06] _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0
(XEN) [2014-01-25 03:42:06] _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0
(XEN) [2014-01-25 03:42:06] _PSS: state_count=16
(XEN) [2014-01-25 03:42:06] State0: 3401MHz 84000mW 10us 10us 0x2600 0x2600
(XEN) [2014-01-25 03:42:06] State1: 3400MHz 84000mW 10us 10us 0x2200 0x2200
(XEN) [2014-01-25 03:42:06] State2: 3200MHz 77169mW 10us 10us 0x2000 0x2000
(XEN) [2014-01-25 03:42:06] State3: 3000MHz 70587mW 10us 10us 0x1e00 0x1e00
(XEN) [2014-01-25 03:42:06] State4: 2800MHz 64262mW 10us 10us 0x1c00 0x1c00
(XEN) [2014-01-25 03:42:06] State5: 2700MHz 61182mW 10us 10us 0x1b00 0x1b00
(XEN) [2014-01-25 03:42:06] State6: 2500MHz 55201mW 10us 10us 0x1900 0x1900
(XEN) [2014-01-25 03:42:06] State7: 2300MHz 49464mW 10us 10us 0x1700 0x1700
(XEN) [2014-01-25 03:42:06] State8: 2100MHz 43946mW 10us 10us 0x1500 0x1500
(XEN) [2014-01-25 03:42:06] State9: 1900MHz 38654mW 10us 10us 0x1300 0x1300
(XEN) [2014-01-25 03:42:06] State10: 1700MHz 34277mW 10us 10us 0x1100 0x1100
(XEN) [2014-01-25 03:42:06] State11: 1500MHz 29407mW 10us 10us 0xf00 0xf00
(XEN) [2014-01-25 03:42:06] State12: 1400MHz 27053mW 10us 10us 0xe00 0xe00
(XEN) [2014-01-25 03:42:06] State13: 1200MHz 22509mW 10us 10us 0xc00 0xc00
(XEN) [2014-01-25 03:42:06] State14: 1000MHz 18167mW 10us 10us 0xa00 0xa00
(XEN) [2014-01-25 03:42:06] State15: 800MHz 14031mW 10us 10us 0x800 0x800
(XEN) [2014-01-25 03:42:06] _PSD: num_entries=5 rev=0 domain=0 coord_type=254 num_processors=8
(XEN) [2014-01-25 03:42:06] _PPC: 0
(XEN) [2014-01-25 03:42:06] xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space
(XEN) [2014-01-25 03:42:06] max_freq: 3401000 second_max_freq: 3400000
(XEN) [2014-01-25 03:42:06] CPU5: Turbo Mode detected and enabled
(XEN) [2014-01-25 03:42:06] CPU 5 initialization completed
(XEN) [2014-01-25 03:42:06] Set CPU acpi_id(8) cpuid(7) Px State info:
(XEN) [2014-01-25 03:42:06] _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0
(XEN) [2014-01-25 03:42:06] _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0
(XEN) [2014-01-25 03:42:06] _PSS: state_count=16
(XEN) [2014-01-25 03:42:06] State0: 3401MHz 84000mW 10us 10us 0x2600 0x2600
(XEN) [2014-01-25 03:42:06] State1: 3400MHz 84000mW 10us 10us 0x2200 0x2200
(XEN) [2014-01-25 03:42:06] State2: 3200MHz 77169mW 10us 10us 0x2000 0x2000
(XEN) [2014-01-25 03:42:06] State3: 3000MHz 70587mW 10us 10us 0x1e00 0x1e00
(XEN) [2014-01-25 03:42:06] State4: 2800MHz 64262mW 10us 10us 0x1c00 0x1c00
(XEN) [2014-01-25 03:42:06] State5: 2700MHz 61182mW 10us 10us 0x1b00 0x1b00
(XEN) [2014-01-25 03:42:06] State6: 2500MHz 55201mW 10us 10us 0x1900 0x1900
(XEN) [2014-01-25 03:42:06] State7: 2300MHz 49464mW 10us 10us 0x1700 0x1700
(XEN) [2014-01-25 03:42:06] State8: 2100MHz 43946mW 10us 10us 0x1500 0x1500
(XEN) [2014-01-25 03:42:06] State9: 1900MHz 38654mW 10us 10us 0x1300 0x1300
(XEN) [2014-01-25 03:42:06] State10: 1700MHz 34277mW 10us 10us 0x1100 0x1100
(XEN) [2014-01-25 03:42:06] State11: 1500MHz 29407mW 10us 10us 0xf00 0xf00
(XEN) [2014-01-25 03:42:06] State12: 1400MHz 27053mW 10us 10us 0xe00 0xe00
(XEN) [2014-01-25 03:42:06] State13: 1200MHz 22509mW 10us 10us 0xc00 0xc00
(XEN) [2014-01-25 03:42:06] State14: 1000MHz 18167mW 10us 10us 0xa00 0xa00
(XEN) [2014-01-25 03:42:06] State15: 800MHz 14031mW 10us 10us 0x800 0x800
(XEN) [2014-01-25 03:42:06] _PSD: num_entries=5 rev=0 domain=0 coord_type=254 num_processors=8
(XEN) [2014-01-25 03:42:06] _PPC: 0
(XEN) [2014-01-25 03:42:06] xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space
(XEN) [2014-01-25 03:42:06] max_freq: 3401000 second_max_freq: 3400000
(XEN) [2014-01-25 03:42:06] CPU7: Turbo Mode detected and enabled
(XEN) [2014-01-25 03:42:06] CPU 7 initialization completed
[ 17.294899] initcall xen_acpi_processor_init+0x0/0x24b returned 0 after 1389646 usecs
[ 17.302768] calling pty_init+0x0/0x453 @ 1
[ 17.314441] kworker/u2:0 (756) used greatest stack depth: 5488 bytes left
[ 17.369193] initcall pty_init+0x0/0x453 returned 0 after 60719 usecs
[ 17.375542] calling sysrq_init+0x0/0xb0 @ 1
[ all xen_hvc_init+0x0/0x228 returned 0 after 1024 usecs
[ 17.398275] calling serial8250_init+0x0/0x1ab @ 1
[ 17.403124] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 17.430759] 00:09: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 17.439166] initcall serial8250_init+0x0/0x1ab returned 0 after 35196 usecs
[ 17.446114] calling serial_pci_driver_init+0x0/0x1b @ 1
[ 17.451590] initcall serial_pci_driver_init+0x0/0x1b returned 0 after 104 usecs
[ 17.458885] calling init_kgdboc+0x0/0x16 @ 1
[ 17.463304] kgdb: Registered I/O driver kgdboc.
[ 17.467927] initcall init_kgdboc+0x0/0x16 returned 0 after 4515 usecs
[ 17.474397] calling init+0x0/0x10f @ 1
[ 17.478522] initcall init+0x0/0x10f returned 0 after 220 usecs
[ 17.484346] calling hpet_init+0x0/0x6a @ 1
[ 17.489080] hpet_acpi_add: no address or irqs in _CRS
[ 17.494215] initcall hpet_init+0x0/0x6a returned 0 after 5490 usecs
[ 17.500467] calling nvram_init+0x0/0x82 @ 1
[ 17.504926] Non-volatile memory driver v1.3
[ 17.509099] initcall nvram_init+0x0/0x82 returned 0 after 4199 usecs
[ 17.515510] calling mod_init+0x0/0x5a @ 1
[ 17.519670] initcall mod_init+0x0/0x5a returned -19 after 0 usecs
[ 17.525822] calling rng_init+0x0/0x12 @ 1
[ 17.530120] initcall rng_init+0x0/0x12 returned 0 after 133 usecs
[ 17.536198] calling agp_init+0x0/0x26 @ 1
[ 17.540356] Linux agpgart interface v0.103
[ 17.544517] initcall agp_init+0x0/0x26 returned 0 after 4063 usecs
[ 17.550757] calling agp_amd64_mod_init+0x0/0xb @ 1
[ 17.555843] initcall agp_amd64_mod_init+0x0/0xb returned -19 after 144 usecs
[ 17.562883] calling agp_intel_init+0x0/0x29 @ 1
[ 17.567653] initcall agp_intel_init+0x0/0x29 returned 0 after 90 usecs
[ 17.574167] calling agp_sis_init+0x0/0x29 @ 1
[ 17.578762] initcall agp_sis_init+0x0/0x29 returned 0 after 88 usecs
[ 17.585102] calling agp_via_init+0x0/0x29 @ 1
[ 17.589698] initcall agp_via_init+0x0/0x29 returned 0 after 88 usecs
[ 17.596041] calling drm_core_init+0x0/0x10c @ 1
[ 17.600809] [drm] Initialized drm 1.1.0 20060810
[ 17.605416] initcall drm_core_init+0x0/0x10c returned 0 after 4585 usecs
[ 17.612175] calling cn_proc_init+0x0/0x3d @ 1
[ 17.616685] initcall cn_proc_init+0x0/0x3d returned 0 after 2 usecs
[ 17.623009] calling topology_sysfs_init+0x0/0x70 @ 1
[ 17.628154] initcall topology_sysfs_init+0x0/0x70 returned 0 after 33 usecs
[ 17.635140] calling loop_init+0x0/0x14e @ 1
[ 17.693296] loop: module loaded
[ 17.696460] initcall loop_init+0x0/0x14e returned 0 after 55648 usecs
[ 17.702930] calling xen_blkif_init+0x0/0x22 @ 1
[ 17.707710] initcall xen_blkif_init+0x0/0x22 returned 0 after 99 usecs
[ 17.714248] calling mac_hid_init+0x0/0x22 @ 1
[ 17.718736] initcall mac_hid_init+0x0/0x22 returned 0 after 8 usecs
[ 17.725055] calling macvlan_init_module+0x0/0x3d @ 1
[ 17.730169] initcall macvlan_init_module+0x0/0x3d returned 0 after 2 usecs
[ 17.737102] calling macvtap_init+0x0/0x100 @ 1
[ 17.741763] initcall macvtap_init+0x0/0x100 returned 0 after 67 usecs
[ 17.748219] calling net_olddevs_init+0x0/0xb5 @ 1
[ 17.753050] initcall net_olddevs_init+0x0/0xb5 returned 0 after 1 usecs
[ 17.759720] calling fixed_mdio_bus_init+0x0/0x105 @ 1
[ 17.765133] libphy: Fixed MDIO Bus: probed
[ 17.769229] initcall fixed_mdio_bus_init+0x0/0x105 returned 0 after 4207 usecs
[ 17.776499] calling tun_init+0x0/0x93 @ 1
[ 17.780658] tun: Universal TUN/TAP device driver, 1.6
[ 17.785771] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 17.792155] initcall tun_init+0x0/0x93 returned 0 after 11226 usecs
[ 17.798418] calling tg3_driver_init+0x0/0x1b @ 1
[ 17.803298] initcall tg3_driver_init+0x0/0x1b returned 0 after 121 usecs
[ 17.809988] calling igb_init_module+0x0/0x58 @ 1
[ 17.814753] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
[ 17.821774] igb: Copyright (c) 2007-2013 Intel Corporation.
[ 17.827672] xen: registering gsi 17 triggering 0 polarity 1
[ 17.833243] Already setup the GSI :17
(XEN) [2014-01-25 03:42:07] msix_capability_init:759 for 02:00.0:, msix:ffff830239467f70 dev:ffff8302394660d0
(XEN) [2014-01-25 03:42:07] msix_capability_init:759 for 02:00.0:, msix:ffff830239467f70 dev:ffff8302394660d0
(XEN) [2014-01-25 03:42:07] msix_capability_init:759 for 02:00.0:, msix:ffff830239467f70 dev:ffff8302394660d0
(XEN) [2014-01-25 03:42:07] msix_capability_init:759 for 02:00.0:, msix:ffff830239467f70 dev:ffff8302394660d0
(XEN) [2014-01-25 03:42:07] msix_capability_init:759 for 02:00.0:, msix:ffff830239467f70 dev:ffff8302394660d0
(XEN) [2014-01-25 03:42:07] msix_capability_init:759 for 02:00.0:, msix:ffff830239467f70 dev:ffff8302394660d0
[ 18.057960] igb 0000:02:00.0: added PHC on eth0
[ 18.062482] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connectie:2.5Gb/s:Width x4) 00:1b:21:45:d9:ac
[ 18.076606] igb 0000:02:00.0: eth0: PBA No: Unknown
[ 18.081548] igb 0000:02:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
[ 18.089439] xen: registering gsi 18 triggering 0 polarity 1
[ 18.095009] Already setup the GSI :18
(XEN) [2014-01-25 03:42:07] msix_capability_init:759 for 02:00.1:, msix:ffff830239466250 dev:ffff830239466190
(XEN) [2014-01-25 03:42:07] msix_capability_init:759 for 02:00.1:, msix:ffff830239466250 dev:ffff830239466190
(XEN) [2014-01-25 03:42:07] msix_capability_init:759 for 02:00.1:, msix:ffff830239466250 dev:ffff830239466190
(XEN) [2014-01-25 03:42:07] msix_capability_init:759 for 02:00.1:, msix:ffff830239466250 dev:ffff830239466190
(XEN) [2014-01-25 03:42:07] msix_capability_init:759 for 02:00.1:, msix:ffff830239466250 dev:ffff830239466190
(XEN) [2014-01-25 03:42:07] msix_capability_init:759 for 02:00.1:, msix:ffff830239466250 dev:ffff830239466190
[ 18.319943] igb 0000:02:00.1: added PHC on eth1
[ 18.324467] igb 0000:02:00.1: Intel(R) Gigabit Ethernet Network Connectiistering gsi 19 triggering 0 polarity 1
[ 18.356994] Already setup the GSI :19
(XEN) [2014-01-25 03:42:08] msix_capability_init:759 for 05:00.0:, msix:0 dev:ffff8302394665b0
(XEN) [2014-01-25 03:42:08] ----[ Xen-4.4-rc2 x86_64 debug=y Tainted: C ]----
(XEN) [2014-01-25 03:42:08] CPU: 0
(XEN) [2014-01-25 03:42:08] RIP: e008:[<ffff82d0801683d6>] msix_capability_init+0x210/0x63e
(XEN) [2014-01-25 03:42:08] RFLAGS: 0000000000010296 CONTEXT: hypervisor
(XEN) [2014-01-25 03:42:08] rax: 0000000000000000 rbx: ffff8302394665b0 rcx: 0000000000000000
(XEN) [2014-01-25 03:42:08] rdx: ffff82d080310e20 rsi: 000000000000000a rdi: ffff82d0802816c8
(XEN) [2014-01-25 03:42:08] rbp: ffff82d0802cfca8 rsp: ffff82d0802cfbf8 r8: 0000000000000000
(XEN) [2014-01-25 03:42:08] r9: 0000000000000000 r10: 0000000000000000 r11: ffff82d080232040
(XEN) [2014-01-25 03:42:08] r12: 0000000000000000 r13: ffff83022a085e30 r14: ffff82d0802cfe98
(XEN) [2014-01-25 03:42:08] r15: 0000000000000000 cr0: 0000000080050033 cr4: 00000000001526f0
(XEN) [2014-01-25 03:42:08] cr3: 000000022dc0c000 cr2: 0000000000000004
(XEN) [2014-01-25 03:42:08] ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: e010 cs: e008
(XEN) [2014-01-25 03:42:08] Xen stack trace from rsp=ffff82d0802cfbf8:
(XEN) [2014-01-25 03:42:08] 0000000000000000 ffff8302394665b0 000000050004fc28 ffff82d0802cfd88
(XEN) [2014-01-25 03:42:08] 000000728012a25f ffff8302ffffffff ffff82d000000000 0000000000000000
(XEN) [2014-01-25 03:42:08] 0000000000000005 0000000000000070 0000000500000000 0000000000000000
(XEN) [2014-01-25 03:42:08] 00000000f1980000 ffff82d000000005 0000000500000003 8005007000000000
(XEN) [2014-01-25 03:42:08] ffff82d0802cfe98 ffff82d0802cfe98 ffff82d0802cfd88 ffff8302394665b0
(XEN) [2014-01-25 03:42:08] 0000000000000005 0000000000000000 ffff82d0802cfd28 ffff82d0801689c2
(XEN) [2014-01-25 03:42:08] 0000000000000246 ffff82d0802cfcd8 ffff82d080129d68 0000000000000000
(XEN) [2014-01-25 03:42:08] ffff82d0802cfd28 ffff82d080147589 ffff82d0802cfd18 ffff830239463b70
(XEN) [2014-01-25 03:42:08] 000000000000010f ffff8302337f8000 000000000000010f 0000000000000022
(XEN) [2014-01-25 03:42:08] 00000000ffffffed ffff830239402200 ffff82d0802cfdc8 ffff82d08016c68c
(XEN) [2014-01-25 03:42:08] ffff83022a085e00 000000000000010f 000000000000010f ffff8302337f80e0
(XEN) [2014-01-25 03:42:08] ffff82d0802cfd98 ffff82d0801047ed 0000010f01402200 ffff82d0802cfe98
(XEN) [2014-01-25 03:42:08] ffff8302337f80e0 ffff8302394665b0 ffff82d0802cfe98 ffff83022a085e00
(XEN) [2014-01-25 03:42:08] ffff82d0802cfdc8 ffff8302337f8000 00000000fffffffd 0000000000000000
(XEN) [2014-01-25 03:42:08] ffff82d0802cfe98 ffff82d0802cfe70 ffff82d0802cfe48 ffff82d08017f134
(XEN) [2014-01-25 03:42:08] ffff82d0802cff18 ffffffff8156d7c6 ffff82d0802cfe98 ffff8302337f80b8
(XEN) [2014-01-25 03:42:08] ffff82d00000010f ffff82d08018bd70 000000220000f800 ffff82d0802cfe74
(XEN) [2014-01-25 03:42:08] ffff820040004000 000000000000000d ffff880078623b08 ffff8300b7313000
(XEN) [2014-01-25 03:42:08] ffff880006db8180 0000000000000000 ffff82d0802cfef8 ffff82d08017f844
(XEN) [2014-01-25 03:42:08] 0000000000000000 0000000700000004 0000000000007ff0 ffffffffffffffff
(XEN) [2014-01-25 03:42:08] Xen call trace:
(XEN) [2014-01-25 03:42:08] [<ffff82d0801683d6>] msix_capability_init+0x210/0x63e
(XEN) [2014-01-25 03:42:08] [<ffff82d0801689c2>] pci_enable_msi+0x1be/0x4d7
(XEN) [2014-01-25 03:42:08] [<ffff82d08016c68c>] map_domain_pirq+0x222/0x5ad
(XEN) [2014-01-25 03:42:08] [<ffff82d08017f134>] physdev_map_pirq+0x507/0x5d1
(XEN) [2014-01-25 03:42:08] [<ffff82d08017f844>] do_physdev_op+0x646/0x1232
(XEN) [2014-01-25 03:42:08] [<ffff82d0802223ab>] syscall_enter+0xeb/0x145
(XEN) [2014-01-25 03:42:08]
(XEN) [2014-01-25 03:42:08] Pagetable walk from 0000000000000004:
(XEN) [2014-01-25 03:42:08] L4[0x000] = 0000000000000000 ffffffffffffffff
(XEN) [2014-01-25 03:42:08]
(XEN) [2014-01-25 03:42:08] ****************************************
(XEN) [2014-01-25 03:42:08] Panic on CPU 0:
(XEN) [2014-01-25 03:42:08] FATAL PAGE FAULT
(XEN) [2014-01-25 03:42:08] [error_code=0000]
(XEN) [2014-01-25 03:42:08] Faulting linear address: 0000000000000004
(XEN) [2014-01-25 03:42:08] ****************************************
(XEN) [2014-01-25 03:42:08]
(XEN) [2014-01-25 03:42:08] Manual reset required ('noreboot' specified)
[-- Attachment #3: Type: text/plain, Size: 126 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
next prev parent reply other threads:[~2014-01-24 21:56 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-21 21:54 Regression compared to Xen 4.3, Xen 4.4-rc2 - pci_prepare_msix+0xb1/0x12 - BOOM Konrad Rzeszutek Wilk
2014-01-22 0:23 ` Andrew Cooper
2014-01-22 0:24 ` [PATCH] x86/msi: Validate the guest-identified PCI devices in pci_prepare_msix() Andrew Cooper
2014-01-22 4:31 ` Konrad Rzeszutek Wilk
2014-01-22 9:49 ` Jan Beulich
2014-01-22 10:28 ` Andrew Cooper
2014-01-22 12:08 ` Jan Beulich
2014-01-22 21:40 ` Konrad Rzeszutek Wilk
2014-01-23 8:24 ` Jan Beulich
2014-01-24 15:01 ` Konrad Rzeszutek Wilk
2014-01-24 15:55 ` Jan Beulich
2014-01-24 16:19 ` Jan Beulich
2014-01-24 17:43 ` Konrad Rzeszutek Wilk
2014-01-24 21:56 ` Konrad Rzeszutek Wilk [this message]
2014-02-05 20:07 ` Is: pci=assign-busses blows up Xen 4.4 Was:Re: " Konrad Rzeszutek Wilk
2014-02-06 9:02 ` Jan Beulich
2014-02-21 19:18 ` Konrad Rzeszutek Wilk
2014-02-24 9:15 ` Is: pci=assign-busses blows up Xen 4.4 Jan Beulich
2014-02-24 16:15 ` Konrad Rzeszutek Wilk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140124215652.GA18710@phenom.dumpdata.com \
--to=konrad.wilk@oracle.com \
--cc=JBeulich@suse.com \
--cc=andrew.cooper3@citrix.com \
--cc=george.dunlap@eu.citrix.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.