From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: imammedo@redhat.com
Subject: [Qemu-devel] [PATCH] pcihp: reduce number of device check events
Date: Sun, 26 Jan 2014 12:37:09 +0200 [thread overview]
Message-ID: <20140126103709.GA8844@redhat.com> (raw)
PIIX created a made-up value for the UP register since it was read by
guest 32 times for each interrupt.
There's no reason to do this for the new PCIHP: register is only read
once for each interrupt, so clean up code by making read act as an
interrupt acknowledgement: the new UP register clear on read.
In this way we cut down the number of bus rescans
by a factor of 32, and drop a bunch of code that's
now unused.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
hw/acpi/pcihp.c | 21 +++++----------------
include/hw/acpi/pcihp.h | 2 +-
2 files changed, 6 insertions(+), 17 deletions(-)
diff --git a/hw/acpi/pcihp.c b/hw/acpi/pcihp.c
index 3fa3d7c..4345f5d 100644
--- a/hw/acpi/pcihp.c
+++ b/hw/acpi/pcihp.c
@@ -116,7 +116,6 @@ static void acpi_pcihp_eject_slot(AcpiPciHpState *s, unsigned bsel, unsigned slo
{
BusChild *kid, *next;
int slot = ffs(slots) - 1;
- bool slot_free = true;
PCIBus *bus = acpi_pcihp_find_hotplug_bus(s, bsel);
if (!bus) {
@@ -125,21 +124,17 @@ static void acpi_pcihp_eject_slot(AcpiPciHpState *s, unsigned bsel, unsigned slo
/* Mark request as complete */
s->acpi_pcihp_pci_status[bsel].down &= ~(1U << slot);
+ s->acpi_pcihp_pci_status[bsel].up &= ~(1U << slot);
QTAILQ_FOREACH_SAFE(kid, &bus->qbus.children, sibling, next) {
DeviceState *qdev = kid->child;
PCIDevice *dev = PCI_DEVICE(qdev);
if (PCI_SLOT(dev->devfn) == slot) {
- if (acpi_pcihp_pc_no_hotplug(s, dev)) {
- slot_free = false;
- } else {
+ if (!acpi_pcihp_pc_no_hotplug(s, dev)) {
object_unparent(OBJECT(qdev));
}
}
}
- if (slot_free) {
- s->acpi_pcihp_pci_status[bsel].device_present &= ~(1U << slot);
- }
}
static void acpi_pcihp_update_hotplug_bus(AcpiPciHpState *s, int bsel)
@@ -153,7 +148,6 @@ static void acpi_pcihp_update_hotplug_bus(AcpiPciHpState *s, int bsel)
}
s->acpi_pcihp_pci_status[bsel].hotplug_enable = ~0;
- s->acpi_pcihp_pci_status[bsel].device_present = 0;
if (!bus) {
return;
@@ -166,8 +160,6 @@ static void acpi_pcihp_update_hotplug_bus(AcpiPciHpState *s, int bsel)
if (acpi_pcihp_pc_no_hotplug(s, pdev)) {
s->acpi_pcihp_pci_status[bsel].hotplug_enable &= ~(1U << slot);
}
-
- s->acpi_pcihp_pci_status[bsel].device_present |= (1U << slot);
}
}
@@ -187,7 +179,7 @@ void acpi_pcihp_reset(AcpiPciHpState *s)
static void enable_device(AcpiPciHpState *s, unsigned bsel, int slot)
{
- s->acpi_pcihp_pci_status[bsel].device_present |= (1U << slot);
+ s->acpi_pcihp_pci_status[bsel].up |= (1U << slot);
}
static void disable_device(AcpiPciHpState *s, unsigned bsel, int slot)
@@ -208,7 +200,6 @@ int acpi_pcihp_device_hotplug(AcpiPciHpState *s, PCIDevice *dev,
* it is present on boot, no hotplug event is necessary. We do send an
* event when the device is disabled later. */
if (state == PCI_COLDPLUG_ENABLED) {
- s->acpi_pcihp_pci_status[bsel].device_present |= (1U << slot);
return 0;
}
@@ -233,10 +224,8 @@ static uint64_t pci_read(void *opaque, hwaddr addr, unsigned int size)
switch (addr) {
case PCI_UP_BASE - PCI_HOTPLUG_ADDR:
- /* Manufacture an "up" value to cause a device check on any hotplug
- * slot with a device. Extra device checks are harmless. */
- val = s->acpi_pcihp_pci_status[bsel].device_present &
- s->acpi_pcihp_pci_status[bsel].hotplug_enable;
+ val = s->acpi_pcihp_pci_status[bsel].up;
+ s->acpi_pcihp_pci_status[bsel].up = 0;
ACPI_PCIHP_DPRINTF("pci_up_read %" PRIu32 "\n", val);
break;
case PCI_DOWN_BASE - PCI_HOTPLUG_ADDR:
diff --git a/include/hw/acpi/pcihp.h b/include/hw/acpi/pcihp.h
index 6230e60..aa297c2 100644
--- a/include/hw/acpi/pcihp.h
+++ b/include/hw/acpi/pcihp.h
@@ -32,7 +32,7 @@
#include "hw/pci/pci.h" /* for PCIHotplugState */
typedef struct AcpiPciHpPciStatus {
- uint32_t up; /* deprecated, maintained for migration compatibility */
+ uint32_t up;
uint32_t down;
uint32_t hotplug_enable;
uint32_t device_present;
--
MST
next reply other threads:[~2014-01-26 10:32 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-26 10:37 Michael S. Tsirkin [this message]
2014-01-27 12:48 ` [Qemu-devel] [PATCH] pcihp: reduce number of device check events Igor Mammedov
2014-01-27 13:27 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140126103709.GA8844@redhat.com \
--to=mst@redhat.com \
--cc=imammedo@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.