From: Greg KH <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>,
torvalds@linux-foundation.org, stable@vger.kernel.org
Cc: lwn@lwn.net, Jiri Slaby <jslaby@suse.cz>
Subject: Re: Linux 3.13.1
Date: Wed, 29 Jan 2014 05:08:23 -0800 [thread overview]
Message-ID: <20140129130823.GB3063@kroah.com> (raw)
In-Reply-To: <20140129130809.GA3063@kroah.com>
diff --git a/Makefile b/Makefile
index b8b7f74696b4..de4cda986be2 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
VERSION = 3
PATCHLEVEL = 13
-SUBLEVEL = 0
+SUBLEVEL = 1
EXTRAVERSION =
NAME = One Giant Leap for Frogkind
diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index 7e0dff58e494..4736a9c57efa 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -105,6 +105,12 @@ static int gpio_extcon_probe(struct platform_device *pdev)
extcon_data->state_off = pdata->state_off;
if (pdata->state_on && pdata->state_off)
extcon_data->edev.print_state = extcon_gpio_print_state;
+
+ ret = devm_gpio_request_one(&pdev->dev, extcon_data->gpio, GPIOF_DIR_IN,
+ pdev->name);
+ if (ret < 0)
+ return ret;
+
if (pdata->debounce) {
ret = gpio_set_debounce(extcon_data->gpio,
pdata->debounce * 1000);
@@ -117,11 +123,6 @@ static int gpio_extcon_probe(struct platform_device *pdev)
if (ret < 0)
return ret;
- ret = devm_gpio_request_one(&pdev->dev, extcon_data->gpio, GPIOF_DIR_IN,
- pdev->name);
- if (ret < 0)
- goto err;
-
INIT_DELAYED_WORK(&extcon_data->work, gpio_extcon_work);
extcon_data->irq = gpio_to_irq(extcon_data->gpio);
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index cbb15716a5db..03f82ab87d9e 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -675,8 +675,10 @@ get_active_stripe(struct r5conf *conf, sector_t sector,
|| !conf->inactive_blocked),
*(conf->hash_locks + hash));
conf->inactive_blocked = 0;
- } else
+ } else {
init_stripe(sh, sector, previous);
+ atomic_inc(&sh->count);
+ }
} else {
spin_lock(&conf->device_lock);
if (atomic_read(&sh->count)) {
@@ -695,13 +697,11 @@ get_active_stripe(struct r5conf *conf, sector_t sector,
sh->group = NULL;
}
}
+ atomic_inc(&sh->count);
spin_unlock(&conf->device_lock);
}
} while (sh == NULL);
- if (sh)
- atomic_inc(&sh->count);
-
spin_unlock_irq(conf->hash_locks + hash);
return sh;
}
@@ -2111,6 +2111,7 @@ static void raid5_end_write_request(struct bio *bi, int error)
set_bit(R5_MadeGoodRepl, &sh->dev[i].flags);
} else {
if (!uptodate) {
+ set_bit(STRIPE_DEGRADED, &sh->state);
set_bit(WriteErrorSeen, &rdev->flags);
set_bit(R5_WriteError, &sh->dev[i].flags);
if (!test_and_set_bit(WantReplacement, &rdev->flags))
diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c
index f3d59e2a1152..341decfb81d1 100644
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -1425,6 +1425,7 @@ static int do_cmd_ioctl(struct comedi_device *dev,
async->cmd.chanlist_len * sizeof(int));
if (IS_ERR(async->cmd.chanlist)) {
ret = PTR_ERR(async->cmd.chanlist);
+ async->cmd.chanlist = NULL;
DPRINTK("memdup_user failed with code %d\n", ret);
goto cleanup;
}
@@ -1547,6 +1548,7 @@ static int do_cmdtest_ioctl(struct comedi_device *dev,
cmd.chanlist_len * sizeof(int));
if (IS_ERR(chanlist)) {
ret = PTR_ERR(chanlist);
+ chanlist = NULL;
DPRINTK("memdup_user exited with code %d", ret);
goto cleanup;
}
diff --git a/drivers/staging/comedi/drivers/addi_apci_1032.c b/drivers/staging/comedi/drivers/addi_apci_1032.c
index 34ab0679e992..b95a8b3395ae 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1032.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1032.c
@@ -325,8 +325,8 @@ static int apci1032_auto_attach(struct comedi_device *dev,
s = &dev->subdevices[1];
if (dev->irq) {
dev->read_subdev = s;
- s->type = COMEDI_SUBD_DI | SDF_CMD_READ;
- s->subdev_flags = SDF_READABLE;
+ s->type = COMEDI_SUBD_DI;
+ s->subdev_flags = SDF_READABLE | SDF_CMD_READ;
s->n_chan = 1;
s->maxdata = 1;
s->range_table = &range_digital;
diff --git a/drivers/staging/comedi/drivers/adl_pci9111.c b/drivers/staging/comedi/drivers/adl_pci9111.c
index eab8da2c3d66..a270a86a45ba 100644
--- a/drivers/staging/comedi/drivers/adl_pci9111.c
+++ b/drivers/staging/comedi/drivers/adl_pci9111.c
@@ -859,7 +859,7 @@ static int pci9111_auto_attach(struct comedi_device *dev,
pci9111_reset(dev);
if (pcidev->irq > 0) {
- ret = request_irq(dev->irq, pci9111_interrupt,
+ ret = request_irq(pcidev->irq, pci9111_interrupt,
IRQF_SHARED, dev->board_name, dev);
if (ret)
return ret;
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 7203864992a5..a0dfb86f9880 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1537,6 +1537,8 @@ static int pl011_startup(struct uart_port *port)
/*
* Provoke TX FIFO interrupt into asserting.
*/
+ spin_lock_irq(&uap->port.lock);
+
cr = UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_LBE;
writew(cr, uap->port.membase + UART011_CR);
writew(0, uap->port.membase + UART011_FBRD);
@@ -1561,6 +1563,8 @@ static int pl011_startup(struct uart_port *port)
cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
writew(cr, uap->port.membase + UART011_CR);
+ spin_unlock_irq(&uap->port.lock);
+
/*
* initialise the old status of the modem signals
*/
@@ -1629,11 +1633,13 @@ static void pl011_shutdown(struct uart_port *port)
* it during startup().
*/
uap->autorts = false;
+ spin_lock_irq(&uap->port.lock);
cr = readw(uap->port.membase + UART011_CR);
uap->old_cr = cr;
cr &= UART011_CR_RTS | UART011_CR_DTR;
cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
writew(cr, uap->port.membase + UART011_CR);
+ spin_unlock_irq(&uap->port.lock);
/*
* disable break condition and fifos
diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index 7119504159f1..87bc2290a400 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -1607,10 +1607,22 @@ static int setattr_chown(struct inode *inode, struct iattr *attr)
if (!(attr->ia_valid & ATTR_GID) || gid_eq(ogid, ngid))
ogid = ngid = NO_GID_QUOTA_CHANGE;
- error = gfs2_quota_lock(ip, nuid, ngid);
+ error = get_write_access(inode);
if (error)
return error;
+ error = gfs2_rs_alloc(ip);
+ if (error)
+ goto out;
+
+ error = gfs2_rindex_update(sdp);
+ if (error)
+ goto out;
+
+ error = gfs2_quota_lock(ip, nuid, ngid);
+ if (error)
+ goto out;
+
if (!uid_eq(ouid, NO_UID_QUOTA_CHANGE) ||
!gid_eq(ogid, NO_GID_QUOTA_CHANGE)) {
error = gfs2_quota_check(ip, nuid, ngid);
@@ -1637,6 +1649,8 @@ out_end_trans:
gfs2_trans_end(sdp);
out_gunlock_q:
gfs2_quota_unlock(ip);
+out:
+ put_write_access(inode);
return error;
}
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 35527173cf50..9fac6dd69b11 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -846,11 +846,14 @@ static __always_inline void *lowmem_page_address(const struct page *page)
#endif
#if defined(WANT_PAGE_VIRTUAL)
-#define page_address(page) ((page)->virtual)
-#define set_page_address(page, address) \
- do { \
- (page)->virtual = (address); \
- } while(0)
+static inline void *page_address(const struct page *page)
+{
+ return page->virtual;
+}
+static inline void set_page_address(struct page *page, void *address)
+{
+ page->virtual = address;
+}
#define page_address_init() do { } while(0)
#endif
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index f281c8068557..314b77eb1216 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1496,11 +1496,14 @@ static bool hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll)
* specification worked this way. Hence, we just ignore the data in
* the unsolicited response to avoid custom WARs.
*/
- int present = snd_hda_pin_sense(codec, pin_nid);
+ int present;
bool update_eld = false;
bool eld_changed = false;
bool ret;
+ snd_hda_power_up(codec);
+ present = snd_hda_pin_sense(codec, pin_nid);
+
mutex_lock(&per_pin->lock);
pin_eld->monitor_present = !!(present & AC_PINSENSE_PRESENCE);
if (pin_eld->monitor_present)
@@ -1573,6 +1576,7 @@ static bool hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll)
jack->block_report = !ret;
mutex_unlock(&per_pin->lock);
+ snd_hda_power_down(codec);
return ret;
}
prev parent reply other threads:[~2014-01-29 13:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-29 13:08 Linux 3.13.1 Greg KH
2014-01-29 13:08 ` Greg KH [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140129130823.GB3063@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=lwn@lwn.net \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.