Re: [PATCH 05/11] drm/i915: Add 180 degree sprite rotation support

["Ville Syrjälä" <ville.syrjala@linux.intel.com>]

On Sat, Feb 01, 2014 at 12:40:41AM +0530, sagar.a.kamble@intel.com wrote:
> From: Sagar Kamble <sagar.a.kamble@intel.com>
> 
> The sprite planes (in fact all display planes starting from gen4)
> support 180 degree rotation. Add the relevant low level bits to the
> sprite code to make use of that feature.
> 
> The upper layers are not yet plugged in.
> 
> Signed-off-by: Ville Syrjala<ville.syrjala@linux.intel.com>
> Tested-by: Sagar Kamble <sagar.a.kamble@intel.com>

I actually posted a v2 of this patch, which fixes HSW. But I guess now
we really need a v3 which extends that fix for BDW. Assuming BDW is like
HSW here.

> ---
>  drivers/gpu/drm/i915/i915_reg.h     |  3 +++
>  drivers/gpu/drm/i915/intel_drv.h    |  1 +
>  drivers/gpu/drm/i915/intel_sprite.c | 34 ++++++++++++++++++++++++++++++++++
>  3 files changed, 38 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index abd18cd..57906c5 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -3637,6 +3637,7 @@
>  #define   DVS_YUV_ORDER_UYVY	(1<<16)
>  #define   DVS_YUV_ORDER_YVYU	(2<<16)
>  #define   DVS_YUV_ORDER_VYUY	(3<<16)
> +#define   DVS_ROTATE_180	(1<<15)
>  #define   DVS_DEST_KEY		(1<<2)
>  #define   DVS_TRICKLE_FEED_DISABLE (1<<14)
>  #define   DVS_TILED		(1<<10)
> @@ -3707,6 +3708,7 @@
>  #define   SPRITE_YUV_ORDER_UYVY		(1<<16)
>  #define   SPRITE_YUV_ORDER_YVYU		(2<<16)
>  #define   SPRITE_YUV_ORDER_VYUY		(3<<16)
> +#define   SPRITE_ROTATE_180		(1<<15)
>  #define   SPRITE_TRICKLE_FEED_DISABLE	(1<<14)
>  #define   SPRITE_INT_GAMMA_ENABLE	(1<<13)
>  #define   SPRITE_TILED			(1<<10)
> @@ -3780,6 +3782,7 @@
>  #define   SP_YUV_ORDER_UYVY		(1<<16)
>  #define   SP_YUV_ORDER_YVYU		(2<<16)
>  #define   SP_YUV_ORDER_VYUY		(3<<16)
> +#define   SP_ROTATE_180			(1<<15)
>  #define   SP_TILED			(1<<10)
>  #define _SPALINOFF		(VLV_DISPLAY_BASE + 0x72184)
>  #define _SPASTRIDE		(VLV_DISPLAY_BASE + 0x72188)
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 44067bc..85864fc 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -397,6 +397,7 @@ struct intel_plane {
>  	unsigned int crtc_w, crtc_h;
>  	uint32_t src_x, src_y;
>  	uint32_t src_w, src_h;
> +	unsigned int rotation;
>  
>  	/* Since we need to change the watermarks before/after
>  	 * enabling/disabling the planes, we need to store the parameters here
> diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
> index 336ae6c..f9c8c41 100644
> --- a/drivers/gpu/drm/i915/intel_sprite.c
> +++ b/drivers/gpu/drm/i915/intel_sprite.c
> @@ -60,6 +60,7 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
>  	sprctl &= ~SP_PIXFORMAT_MASK;
>  	sprctl &= ~SP_YUV_BYTE_ORDER_MASK;
>  	sprctl &= ~SP_TILED;
> +	sprctl &= ~SP_ROTATE_180;
>  
>  	switch (fb->pixel_format) {
>  	case DRM_FORMAT_YUYV:
> @@ -131,6 +132,14 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
>  							fb->pitches[0]);
>  	linear_offset -= sprsurf_offset;
>  
> +	if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
> +		sprctl |= SP_ROTATE_180;
> +
> +		x += src_w;
> +		y += src_h;
> +		linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
> +	}
> +
>  	I915_WRITE(SPSTRIDE(pipe, plane), fb->pitches[0]);
>  	I915_WRITE(SPPOS(pipe, plane), (crtc_y << 16) | crtc_x);
>  
> @@ -238,6 +247,7 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
>  	sprctl &= ~SPRITE_RGB_ORDER_RGBX;
>  	sprctl &= ~SPRITE_YUV_BYTE_ORDER_MASK;
>  	sprctl &= ~SPRITE_TILED;
> +	sprctl &= ~SPRITE_ROTATE_180;
>  
>  	switch (fb->pixel_format) {
>  	case DRM_FORMAT_XBGR8888:
> @@ -299,6 +309,14 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
>  					       pixel_size, fb->pitches[0]);
>  	linear_offset -= sprsurf_offset;
>  
> +	if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
> +		sprctl |= SPRITE_ROTATE_180;
> +
> +		x += src_w;
> +		y += src_h;
> +		linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
> +	}
> +
>  	I915_WRITE(SPRSTRIDE(pipe), fb->pitches[0]);
>  	I915_WRITE(SPRPOS(pipe), (crtc_y << 16) | crtc_x);
>  
> @@ -422,6 +440,7 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
>  	dvscntr &= ~DVS_RGB_ORDER_XBGR;
>  	dvscntr &= ~DVS_YUV_BYTE_ORDER_MASK;
>  	dvscntr &= ~DVS_TILED;
> +	dvscntr &= ~DVS_ROTATE_180;
>  
>  	switch (fb->pixel_format) {
>  	case DRM_FORMAT_XBGR8888:
> @@ -478,6 +497,14 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
>  					       pixel_size, fb->pitches[0]);
>  	linear_offset -= dvssurf_offset;
>  
> +	if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
> +		dvscntr |= DVS_ROTATE_180;
> +
> +		x += src_w;
> +		y += src_h;
> +		linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
> +	}
> +
>  	I915_WRITE(DVSSTRIDE(pipe), fb->pitches[0]);
>  	I915_WRITE(DVSPOS(pipe), (crtc_y << 16) | crtc_x);
>  
> @@ -739,6 +766,9 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
>  	max_scale = intel_plane->max_downscale << 16;
>  	min_scale = intel_plane->can_scale ? 1 : (1 << 16);
>  
> +	drm_rect_rotate(&src, fb->width << 16, fb->height << 16,
> +			intel_plane->rotation);
> +
>  	hscale = drm_rect_calc_hscale_relaxed(&src, &dst, min_scale, max_scale);
>  	BUG_ON(hscale < 0);
>  
> @@ -777,6 +807,9 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
>  				     drm_rect_width(&dst) * hscale - drm_rect_width(&src),
>  				     drm_rect_height(&dst) * vscale - drm_rect_height(&src));
>  
> +		drm_rect_rotate_inv(&src, fb->width << 16, fb->height << 16,
> +				    intel_plane->rotation);
> +
>  		/* sanity check to make sure the src viewport wasn't enlarged */
>  		WARN_ON(src.x1 < (int) src_x ||
>  			src.y1 < (int) src_y ||
> @@ -1141,6 +1174,7 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
>  
>  	intel_plane->pipe = pipe;
>  	intel_plane->plane = plane;
> +	intel_plane->rotation = BIT(DRM_ROTATE_0);
>  	possible_crtcs = (1 << pipe);
>  	ret = drm_plane_init(dev, &intel_plane->base, possible_crtcs,
>  			     &intel_plane_funcs,
> -- 
> 1.8.5

-- 
Ville Syrjälä
Intel OTC