All of lore.kernel.org
 help / color / mirror / Atom feed
diff for duplicates of <20140204092750.GK25625@lukather>

diff --git a/a/1.txt b/N1/1.txt
index ecca008..52a79c6 100644
--- a/a/1.txt
+++ b/N1/1.txt
@@ -2,7 +2,7 @@ On Tue, Feb 04, 2014 at 10:43:33AM +0800, Chen-Yu Tsai wrote:
 > Hi,
 > 
 > On Tue, Feb 4, 2014 at 3:31 AM, Maxime Ripard
-> <maxime.ripard@free-electrons.com> wrote:
+> <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> wrote:
 > > Hi,
 > >
 > > On Mon, Feb 03, 2014 at 11:32:19AM +0800, Chen-Yu Tsai wrote:
@@ -10,7 +10,7 @@ On Tue, Feb 04, 2014 at 10:43:33AM +0800, Chen-Yu Tsai wrote:
 > >> and interface type of the GMAC ethernet controller. Model this as
 > >> a single clock for GMAC drivers to use.
 > >>
-> >> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
+> >> Signed-off-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
 > >> ---
 > >>  Documentation/devicetree/bindings/clock/sunxi.txt | 26 +++++++
 > >>  drivers/clk/sunxi/clk-sunxi.c                     | 83 +++++++++++++++++++++++
@@ -42,26 +42,26 @@ On Tue, Feb 04, 2014 at 10:43:33AM +0800, Chen-Yu Tsai wrote:
 > >>  Clock consumers should specify the desired clocks they use with a
 > >>  "clocks" phandle cell. Consumers that are using a gated clock should
 > >>  provide an additional ID in their clock property. This ID is the
-> >> @@ -96,3 +100,25 @@ mmc0_clk: clk at 01c20088 {
+> >> @@ -96,3 +100,25 @@ mmc0_clk: clk@01c20088 {
 > >>       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 > >>       clock-output-names = "mmc0";
 > >>  };
 > >> +
-> >> +mii_phy_tx_clk: clk at 2 {
+> >> +mii_phy_tx_clk: clk@2 {
 > >> +     #clock-cells = <0>;
 > >> +     compatible = "fixed-clock";
 > >> +     clock-frequency = <25000000>;
 > >> +     clock-output-names = "mii_phy_tx";
 > >> +};
 > >> +
-> >> +gmac_int_tx_clk: clk at 3 {
+> >> +gmac_int_tx_clk: clk@3 {
 > >> +     #clock-cells = <0>;
 > >> +     compatible = "fixed-clock";
 > >> +     clock-frequency = <125000000>;
 > >> +     clock-output-names = "gmac_int_tx";
 > >> +};
 > >> +
-> >> +gmac_clk: clk at 01c20164 {
+> >> +gmac_clk: clk@01c20164 {
 > >> +     #clock-cells = <0>;
 > >> +     compatible = "allwinner,sun7i-a20-gmac-clk";
 > >> +     reg = <0x01c20164 0x4>;
@@ -82,10 +82,3 @@ Maxime
 Maxime Ripard, Free Electrons
 Embedded Linux, Kernel and Android engineering
 http://free-electrons.com
--------------- next part --------------
-A non-text attachment was scrubbed...
-Name: signature.asc
-Type: application/pgp-signature
-Size: 836 bytes
-Desc: Digital signature
-URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140204/e48653e2/attachment.sig>
diff --git a/N1/2.bin b/N1/2.bin
new file mode 100644
index 0000000..123776e
--- /dev/null
+++ b/N1/2.bin
@@ -0,0 +1,17 @@
+-----BEGIN PGP SIGNATURE-----
+Version: GnuPG v1.4.14 (GNU/Linux)
+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+=ImRB
+-----END PGP SIGNATURE-----
diff --git a/N1/2.hdr b/N1/2.hdr
new file mode 100644
index 0000000..3237378
--- /dev/null
+++ b/N1/2.hdr
@@ -0,0 +1,2 @@
+Content-Type: application/pgp-signature; name="signature.asc"
+Content-Description: Digital signature
diff --git a/a/content_digest b/N1/content_digest
index 8d83bf7..b5469a1 100644
--- a/a/content_digest
+++ b/N1/content_digest
@@ -2,17 +2,24 @@
  "ref\01391398346-5094-2-git-send-email-wens@csie.org\0"
  "ref\020140203193108.GC25625@lukather\0"
  "ref\0CAGb2v64+qiBqYtWyc23b6p4aWyWj7a9K1qveTsW7ZGh0ti8_Wg@mail.gmail.com\0"
- "From\0maxime.ripard@free-electrons.com (Maxime Ripard)\0"
- "Subject\0[PATCH v3 1/8] clk: sunxi: Add Allwinner A20/A31 GMAC clock unit\0"
+ "ref\0CAGb2v64+qiBqYtWyc23b6p4aWyWj7a9K1qveTsW7ZGh0ti8_Wg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org\0"
+ "From\0Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>\0"
+ "Subject\0Re: [PATCH v3 1/8] clk: sunxi: Add Allwinner A20/A31 GMAC clock unit\0"
  "Date\0Tue, 4 Feb 2014 10:27:50 +0100\0"
- "To\0linux-arm-kernel@lists.infradead.org\0"
- "\00:1\0"
+ "To\0Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>\0"
+ "Cc\0Emilio Lopez <emilio-0Z03zUJReD5OxF6Tv1QG9Q@public.gmane.org>"
+  Mike Turquette <mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
+  linux-arm-kernel <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
+  linux-sunxi <linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org>
+  devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
+ " linux-kernel <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>\0"
+ "\01:1\0"
  "b\0"
  "On Tue, Feb 04, 2014 at 10:43:33AM +0800, Chen-Yu Tsai wrote:\n"
  "> Hi,\n"
  "> \n"
  "> On Tue, Feb 4, 2014 at 3:31 AM, Maxime Ripard\n"
- "> <maxime.ripard@free-electrons.com> wrote:\n"
+ "> <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> wrote:\n"
  "> > Hi,\n"
  "> >\n"
  "> > On Mon, Feb 03, 2014 at 11:32:19AM +0800, Chen-Yu Tsai wrote:\n"
@@ -20,7 +27,7 @@
  "> >> and interface type of the GMAC ethernet controller. Model this as\n"
  "> >> a single clock for GMAC drivers to use.\n"
  "> >>\n"
- "> >> Signed-off-by: Chen-Yu Tsai <wens@csie.org>\n"
+ "> >> Signed-off-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>\n"
  "> >> ---\n"
  "> >>  Documentation/devicetree/bindings/clock/sunxi.txt | 26 +++++++\n"
  "> >>  drivers/clk/sunxi/clk-sunxi.c                     | 83 +++++++++++++++++++++++\n"
@@ -52,26 +59,26 @@
  "> >>  Clock consumers should specify the desired clocks they use with a\n"
  "> >>  \"clocks\" phandle cell. Consumers that are using a gated clock should\n"
  "> >>  provide an additional ID in their clock property. This ID is the\n"
- "> >> @@ -96,3 +100,25 @@ mmc0_clk: clk at 01c20088 {\n"
+ "> >> @@ -96,3 +100,25 @@ mmc0_clk: clk@01c20088 {\n"
  "> >>       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;\n"
  "> >>       clock-output-names = \"mmc0\";\n"
  "> >>  };\n"
  "> >> +\n"
- "> >> +mii_phy_tx_clk: clk at 2 {\n"
+ "> >> +mii_phy_tx_clk: clk@2 {\n"
  "> >> +     #clock-cells = <0>;\n"
  "> >> +     compatible = \"fixed-clock\";\n"
  "> >> +     clock-frequency = <25000000>;\n"
  "> >> +     clock-output-names = \"mii_phy_tx\";\n"
  "> >> +};\n"
  "> >> +\n"
- "> >> +gmac_int_tx_clk: clk at 3 {\n"
+ "> >> +gmac_int_tx_clk: clk@3 {\n"
  "> >> +     #clock-cells = <0>;\n"
  "> >> +     compatible = \"fixed-clock\";\n"
  "> >> +     clock-frequency = <125000000>;\n"
  "> >> +     clock-output-names = \"gmac_int_tx\";\n"
  "> >> +};\n"
  "> >> +\n"
- "> >> +gmac_clk: clk at 01c20164 {\n"
+ "> >> +gmac_clk: clk@01c20164 {\n"
  "> >> +     #clock-cells = <0>;\n"
  "> >> +     compatible = \"allwinner,sun7i-a20-gmac-clk\";\n"
  "> >> +     reg = <0x01c20164 0x4>;\n"
@@ -91,13 +98,27 @@
  "-- \n"
  "Maxime Ripard, Free Electrons\n"
  "Embedded Linux, Kernel and Android engineering\n"
- "http://free-electrons.com\n"
- "-------------- next part --------------\n"
- "A non-text attachment was scrubbed...\n"
- "Name: signature.asc\n"
- "Type: application/pgp-signature\n"
- "Size: 836 bytes\n"
- "Desc: Digital signature\n"
- URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140204/e48653e2/attachment.sig>
+ http://free-electrons.com
+ "\01:2\0"
+ "fn\0signature.asc\0"
+ "d\0Digital signature\0"
+ "b\0"
+ "-----BEGIN PGP SIGNATURE-----\n"
+ "Version: GnuPG v1.4.14 (GNU/Linux)\n"
+ "\n"
+ "iQIcBAEBAgAGBQJS8LKWAAoJEBx+YmzsjxAgxEoP/1Ub2JG1TD1EDfayvJL9wTB3\n"
+ "CU5XCYp98UNezbD/D2nfmS6psbhsLlpT8+L26CoFS4ISxGfaN3MG9Qw4D0IUPmM9\n"
+ "e/wrduyqefNIwg7a7tciBrJBHprSLRF07ief2usqLiwO+pEFsUnYyUyA09k3WIWg\n"
+ "5+imwBYBXG+ScFFo2I34tagUzGDIxIcKbWqQz1dzVOWIdasiYBEDBQeB7SkKZhDF\n"
+ "SOA2ypb2ubj5/yz3xFbq1L7Msgzmf5i0hUYNU+cv/g12NgDxt92j9hUDGDKvV+PW\n"
+ "lisA600BfNu6yOc8lT4inWy1wRbb6hIf3X+jmnCTiRzMBt49IgtDzWl/pX3OF1TA\n"
+ "uxFGb9Cr911cCF3myY07nzKVuudyjP2GP6LUCD4KA5/2KKAM/LIj3CN+4/B2Q3T1\n"
+ "uL0QWjAfaci1n2OIDIfbnyBZoEL+gJx3Tm4F2I3fgWIjzX2bnQ2+Mrz4ZYNsv97p\n"
+ "SnDZ2Y9pALMFlDi13Wd8Xfztaa6Mat+YhZSeWiTusphaO0gSpl1WGA+gvKs9UhIr\n"
+ "UfDBkc6yIwk1Rla5cPyv3g1alFq0bsr0I+hALmleNvws5wDO7vmkF/Ze6SYROM4z\n"
+ "X/BZTsCIcUclJSrsVWrKXlpxbXYVhkHNxagXSwKAPNmo763ou/qbH2iR4wPK+088\n"
+ "RSHLHqRfGF8T2BUl/T1g\n"
+ "=ImRB\n"
+ "-----END PGP SIGNATURE-----\n"
 
-5db8632d2f434a06a3e22ea416faf538d5eff63f18cb6bfbd9287093dfa791f3
+173dc32a97413287023b70851595c7eaba4a09dd9c80c22c7b8ffac59074f55e

diff --git a/a/1.txt b/N2/1.txt
index ecca008..e7146db 100644
--- a/a/1.txt
+++ b/N2/1.txt
@@ -42,26 +42,26 @@ On Tue, Feb 04, 2014 at 10:43:33AM +0800, Chen-Yu Tsai wrote:
 > >>  Clock consumers should specify the desired clocks they use with a
 > >>  "clocks" phandle cell. Consumers that are using a gated clock should
 > >>  provide an additional ID in their clock property. This ID is the
-> >> @@ -96,3 +100,25 @@ mmc0_clk: clk at 01c20088 {
+> >> @@ -96,3 +100,25 @@ mmc0_clk: clk@01c20088 {
 > >>       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 > >>       clock-output-names = "mmc0";
 > >>  };
 > >> +
-> >> +mii_phy_tx_clk: clk at 2 {
+> >> +mii_phy_tx_clk: clk@2 {
 > >> +     #clock-cells = <0>;
 > >> +     compatible = "fixed-clock";
 > >> +     clock-frequency = <25000000>;
 > >> +     clock-output-names = "mii_phy_tx";
 > >> +};
 > >> +
-> >> +gmac_int_tx_clk: clk at 3 {
+> >> +gmac_int_tx_clk: clk@3 {
 > >> +     #clock-cells = <0>;
 > >> +     compatible = "fixed-clock";
 > >> +     clock-frequency = <125000000>;
 > >> +     clock-output-names = "gmac_int_tx";
 > >> +};
 > >> +
-> >> +gmac_clk: clk at 01c20164 {
+> >> +gmac_clk: clk@01c20164 {
 > >> +     #clock-cells = <0>;
 > >> +     compatible = "allwinner,sun7i-a20-gmac-clk";
 > >> +     reg = <0x01c20164 0x4>;
@@ -82,10 +82,3 @@ Maxime
 Maxime Ripard, Free Electrons
 Embedded Linux, Kernel and Android engineering
 http://free-electrons.com
--------------- next part --------------
-A non-text attachment was scrubbed...
-Name: signature.asc
-Type: application/pgp-signature
-Size: 836 bytes
-Desc: Digital signature
-URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140204/e48653e2/attachment.sig>
diff --git a/N2/2.bin b/N2/2.bin
new file mode 100644
index 0000000..123776e
--- /dev/null
+++ b/N2/2.bin
@@ -0,0 +1,17 @@
+-----BEGIN PGP SIGNATURE-----
+Version: GnuPG v1.4.14 (GNU/Linux)
+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+=ImRB
+-----END PGP SIGNATURE-----
diff --git a/N2/2.hdr b/N2/2.hdr
new file mode 100644
index 0000000..3237378
--- /dev/null
+++ b/N2/2.hdr
@@ -0,0 +1,2 @@
+Content-Type: application/pgp-signature; name="signature.asc"
+Content-Description: Digital signature
diff --git a/a/content_digest b/N2/content_digest
index 8d83bf7..64de0fa 100644
--- a/a/content_digest
+++ b/N2/content_digest
@@ -2,11 +2,17 @@
  "ref\01391398346-5094-2-git-send-email-wens@csie.org\0"
  "ref\020140203193108.GC25625@lukather\0"
  "ref\0CAGb2v64+qiBqYtWyc23b6p4aWyWj7a9K1qveTsW7ZGh0ti8_Wg@mail.gmail.com\0"
- "From\0maxime.ripard@free-electrons.com (Maxime Ripard)\0"
- "Subject\0[PATCH v3 1/8] clk: sunxi: Add Allwinner A20/A31 GMAC clock unit\0"
+ "From\0Maxime Ripard <maxime.ripard@free-electrons.com>\0"
+ "Subject\0Re: [PATCH v3 1/8] clk: sunxi: Add Allwinner A20/A31 GMAC clock unit\0"
  "Date\0Tue, 4 Feb 2014 10:27:50 +0100\0"
- "To\0linux-arm-kernel@lists.infradead.org\0"
- "\00:1\0"
+ "To\0Chen-Yu Tsai <wens@csie.org>\0"
+ "Cc\0Emilio Lopez <emilio@elopez.com.ar>"
+  Mike Turquette <mturquette@linaro.org>
+  linux-arm-kernel <linux-arm-kernel@lists.infradead.org>
+  linux-sunxi <linux-sunxi@googlegroups.com>
+  devicetree <devicetree@vger.kernel.org>
+ " linux-kernel <linux-kernel@vger.kernel.org>\0"
+ "\01:1\0"
  "b\0"
  "On Tue, Feb 04, 2014 at 10:43:33AM +0800, Chen-Yu Tsai wrote:\n"
  "> Hi,\n"
@@ -52,26 +58,26 @@
  "> >>  Clock consumers should specify the desired clocks they use with a\n"
  "> >>  \"clocks\" phandle cell. Consumers that are using a gated clock should\n"
  "> >>  provide an additional ID in their clock property. This ID is the\n"
- "> >> @@ -96,3 +100,25 @@ mmc0_clk: clk at 01c20088 {\n"
+ "> >> @@ -96,3 +100,25 @@ mmc0_clk: clk@01c20088 {\n"
  "> >>       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;\n"
  "> >>       clock-output-names = \"mmc0\";\n"
  "> >>  };\n"
  "> >> +\n"
- "> >> +mii_phy_tx_clk: clk at 2 {\n"
+ "> >> +mii_phy_tx_clk: clk@2 {\n"
  "> >> +     #clock-cells = <0>;\n"
  "> >> +     compatible = \"fixed-clock\";\n"
  "> >> +     clock-frequency = <25000000>;\n"
  "> >> +     clock-output-names = \"mii_phy_tx\";\n"
  "> >> +};\n"
  "> >> +\n"
- "> >> +gmac_int_tx_clk: clk at 3 {\n"
+ "> >> +gmac_int_tx_clk: clk@3 {\n"
  "> >> +     #clock-cells = <0>;\n"
  "> >> +     compatible = \"fixed-clock\";\n"
  "> >> +     clock-frequency = <125000000>;\n"
  "> >> +     clock-output-names = \"gmac_int_tx\";\n"
  "> >> +};\n"
  "> >> +\n"
- "> >> +gmac_clk: clk at 01c20164 {\n"
+ "> >> +gmac_clk: clk@01c20164 {\n"
  "> >> +     #clock-cells = <0>;\n"
  "> >> +     compatible = \"allwinner,sun7i-a20-gmac-clk\";\n"
  "> >> +     reg = <0x01c20164 0x4>;\n"
@@ -91,13 +97,27 @@
  "-- \n"
  "Maxime Ripard, Free Electrons\n"
  "Embedded Linux, Kernel and Android engineering\n"
- "http://free-electrons.com\n"
- "-------------- next part --------------\n"
- "A non-text attachment was scrubbed...\n"
- "Name: signature.asc\n"
- "Type: application/pgp-signature\n"
- "Size: 836 bytes\n"
- "Desc: Digital signature\n"
- URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140204/e48653e2/attachment.sig>
+ http://free-electrons.com
+ "\01:2\0"
+ "fn\0signature.asc\0"
+ "d\0Digital signature\0"
+ "b\0"
+ "-----BEGIN PGP SIGNATURE-----\n"
+ "Version: GnuPG v1.4.14 (GNU/Linux)\n"
+ "\n"
+ "iQIcBAEBAgAGBQJS8LKWAAoJEBx+YmzsjxAgxEoP/1Ub2JG1TD1EDfayvJL9wTB3\n"
+ "CU5XCYp98UNezbD/D2nfmS6psbhsLlpT8+L26CoFS4ISxGfaN3MG9Qw4D0IUPmM9\n"
+ "e/wrduyqefNIwg7a7tciBrJBHprSLRF07ief2usqLiwO+pEFsUnYyUyA09k3WIWg\n"
+ "5+imwBYBXG+ScFFo2I34tagUzGDIxIcKbWqQz1dzVOWIdasiYBEDBQeB7SkKZhDF\n"
+ "SOA2ypb2ubj5/yz3xFbq1L7Msgzmf5i0hUYNU+cv/g12NgDxt92j9hUDGDKvV+PW\n"
+ "lisA600BfNu6yOc8lT4inWy1wRbb6hIf3X+jmnCTiRzMBt49IgtDzWl/pX3OF1TA\n"
+ "uxFGb9Cr911cCF3myY07nzKVuudyjP2GP6LUCD4KA5/2KKAM/LIj3CN+4/B2Q3T1\n"
+ "uL0QWjAfaci1n2OIDIfbnyBZoEL+gJx3Tm4F2I3fgWIjzX2bnQ2+Mrz4ZYNsv97p\n"
+ "SnDZ2Y9pALMFlDi13Wd8Xfztaa6Mat+YhZSeWiTusphaO0gSpl1WGA+gvKs9UhIr\n"
+ "UfDBkc6yIwk1Rla5cPyv3g1alFq0bsr0I+hALmleNvws5wDO7vmkF/Ze6SYROM4z\n"
+ "X/BZTsCIcUclJSrsVWrKXlpxbXYVhkHNxagXSwKAPNmo763ou/qbH2iR4wPK+088\n"
+ "RSHLHqRfGF8T2BUl/T1g\n"
+ "=ImRB\n"
+ "-----END PGP SIGNATURE-----\n"
 
-5db8632d2f434a06a3e22ea416faf538d5eff63f18cb6bfbd9287093dfa791f3
+7bebfb2e6304ec6e0d6545df285f93e019337437de7796b7f193485377bf1dd8

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.