[PATCH 10/21] ARM: MM: Add DT binding for Feroceon L2 cache

[andrew@lunn.ch (Andrew Lunn)]

On Thu, Feb 06, 2014 at 08:27:52PM -0500, Jason Cooper wrote:
> On Fri, Feb 07, 2014 at 12:42:06AM +0100, Andrew Lunn wrote:
> > Instantiate the L2 cache from DT. Indicate in DT where the cache
> > control register is and if write through should be made.
> > 
> > Signed-off-by: Andrew Lunn <andrew@lunn.ch>
> > ---
> >  .../devicetree/bindings/arm/mrvl/foroceon.txt      | 19 +++++++++
> >  arch/arm/boot/dts/kirkwood.dtsi                    |  5 +++
> >  arch/arm/include/asm/hardware/cache-feroceon-l2.h  |  2 +
> >  arch/arm/mach-kirkwood/board-dt.c                  | 15 +------
> >  arch/arm/mm/cache-feroceon-l2.c                    | 46 ++++++++++++++++++++++
> >  5 files changed, 73 insertions(+), 14 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/arm/mrvl/foroceon.txt
> 
> for the next revision, please split out the dtsi changes into a separate
> patch.
> 
> > 
> > diff --git a/Documentation/devicetree/bindings/arm/mrvl/foroceon.txt b/Documentation/devicetree/bindings/arm/mrvl/foroceon.txt
> > new file mode 100644
> > index 000000000000..8058676d1476
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/arm/mrvl/foroceon.txt
> 
> name typo.
> 
> > @@ -0,0 +1,19 @@
> > +* Marvell Feroceon Cache
> > +
> > +Required properties:
> > +- compatible : Should be "marvell,feroceon-kirkwood".
> 
> This is a little ambiguous, I'd like to see 'l2' in the compatible string.

I will take Jason's advice on naming and change this..

> > +#ifdef CONFIG_OF
> > +static const struct of_device_id feroceon_ids[] __initconst = {
> > +	{ .compatible = "marvell,feroceon-kirkwood"},
> > +	{}
> > +};
> > +
> > +int __init feroceon_of_init(void)
> > +{
> > +	struct device_node *node;
> > +	void __iomem *base;
> > +	bool writethrough = false;
> > +	struct resource res;
> > +
> > +	node = of_find_matching_node(NULL, feroceon_ids);
> > +	if (!node) {
> > +		pr_info("Didn't find marvell,feroceon-*, not enabling it\n");
> > +		return -ENODEV;
> > +	}
> 
> I'd prefer to fallback to hardcoded register address here.  We know
> we're on kirkwood at this point.

We could also be on mv78xx0, sometime in the future. So we need to at
least look at the compatible string to see what SoC we are. It is also
rather ugly having hard coded addresses. We might as well go back to
platform devices.

I would prefer upping this to pr_err(FW_INFO, and not falling back to
hard coded values. This is not a fatal error, the machine continues to
run, just a bit slower.

     Andrew