From: Fengguang Wu <fengguang.wu@intel.com>
To: Al Viro <viro@zeniv.linux.org.uk>
Cc: LKML <linux-kernel@vger.kernel.org>
Subject: [process_vm_access] BUG: unable to handle kernel paging request at fffffff27b92dd20
Date: Mon, 10 Feb 2014 19:22:31 +0800 [thread overview]
Message-ID: <20140210112231.GA11951@localhost> (raw)
[-- Attachment #1: Type: text/plain, Size: 2572 bytes --]
Hi Al,
We noticed the below oops since commit 68a25f08c9bec07ad95e55a01b127168e43aed84
("process_vm_access: take get_user_pages/put_pages one level up")
while running ltp tests inside kvm.
[ 466.193846] BUG: unable to handle kernel paging request at fffffff27b92dd20
[ 466.195225] IP: [<ffffffff81190d7f>] put_page+0x5/0x28
[ 466.196263] PGD 220d067 PUD 0
[ 466.197137] Oops: 0000 [#1] SMP
[ 466.197261] Modules linked in: msr microcode processor
[ 466.197261] CPU: 2 PID: 30338 Comm: process_vm01 Not tainted 3.14.0-rc1-00027-g68a25f0 #1
[ 466.197261] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 466.197261] task: ffff88007c11ecc0 ti: ffff88007b92c000 task.ti: ffff88007b92c000
[ 466.197261] RIP: 0010:[<ffffffff81190d7f>] [<ffffffff81190d7f>] put_page+0x5/0x28
[ 466.197261] RSP: 0018:ffff88007b92dc98 EFLAGS: 00010286
[ 466.197261] RAX: fffffffffffffff0 RBX: 0000000000000000 RCX: 0000000000001000
[ 466.197261] RDX: 0000000000000000 RSI: 0000000097230000 RDI: fffffff27b92dd20
[ 466.197261] RBP: ffff88007b92dde8 R08: 0000000000000000 R09: 00007fe39722f001
[ 466.197261] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88007c11ecc0
[ 466.197261] R13: ffff88007b92dd40 R14: fffffffffffffff2 R15: ffff88007b92de10
[ 466.197261] FS: 00007fe397228700(0000) GS:ffff88011fd00000(0000) knlGS:0000000000000000
[ 466.197261] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 466.197261] CR2: fffffff27b92dd20 CR3: 000000007f537000 CR4: 00000000000006e0
[ 466.197261] Stack:
[ 466.197261] ffffffff811b7ea1 ffff88007b92dd40 0000000000000000 000000000000000d
[ 466.197261] ffffffff81f7ad76 fffffff27b92dd20 ffff88007baa4420 0000000000000001
[ 466.197261] 0000000000000000 ffff88007b92deb0 0000000000001000 0000000000000001
[ 466.197261] Call Trace:
[ 466.197261] [<ffffffff811b7ea1>] ? process_vm_rw_core.isra.1+0x39f/0x444
[ 466.197261] [<ffffffff811aadbb>] ? handle_mm_fault+0x9e9/0xc9c
[ 466.197261] [<ffffffff811a65f0>] ? might_fault+0x3e/0x40
[ 466.197261] [<ffffffff811e2264>] ? rw_copy_check_uvector+0x6f/0xfd
[ 466.197261] [<ffffffff811b8017>] process_vm_rw+0xd1/0x117
[ 466.197261] [<ffffffff811b05ae>] ? do_mmap_pgoff+0x2e1/0x34c
[ 466.197261] [<ffffffff8119d9fe>] ? vm_mmap_pgoff+0x72/0x94
[ 466.197261] [<ffffffff81a2eb5e>] ? do_page_fault+0xe/0x10
[ 466.197261] [<ffffffff8151472b>] ? trace_hardirqs_on_thunk+0x3a/0x3c
[ 466.197261] [<ffffffff811b8073>] SyS_process_vm_readv+0x16/0x18
[ 466.197261] [<ffffffff81a32b29>] system_call_fastpath+0x16/0x1b
Attached is the full dmesg.
Thanks,
Fengguang
[-- Attachment #2: dmesg-vpx-1:20140208151504:x86_64-lkp:3.14.0-rc1-00027-g68a25f0:1 --]
[-- Type: text/plain, Size: 66991 bytes --]
early console in setup code
Probing EDD (edd=off to disable)... ok
early console in decompress_kernel
Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.14.0-rc1-00027-g68a25f0 (kbuild@inn) (gcc version 4.8.1 (Debian 4.8.1-8) ) #1 SMP Sat Feb 8 15:01:51 CST 2014
[ 0.000000] Command line: user=lkp job=/lkp/scheduled/vpx-1/bisect_ltp-syscalls-x86_64-lkp-68a25f08c9bec07ad95e55a01b127168e43aed84-0.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/vmlinuz-3.14.0-rc1-00027-g68a25f0 kconfig=x86_64-lkp commit=68a25f08c9bec07ad95e55a01b127168e43aed84 bm_initrd=/lkp/benchmarks/ltp.cgz modules_initrd=/kernel/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/modules.cgz max_uptime=1725 RESULT_ROOT=/lkp/result/vpx/micro/ltp/syscalls/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/0 initrd=/kernel-tests/initrd/lkp-rootfs.cgz root=/dev/ram0 ip=::::vpx-1::dhcp oops=panic earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled panic=10 softlockup_panic=1 nmi_watchdog=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfffdfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dfffe000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xdfffe max_arch_pfn = 0x400000000
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] found SMP MP-table at [mem 0x000fda90-0x000fda9f] mapped at [ffff8800000fda90]
[ 0.000000] mpc: fdaa0-fdbe4
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02663000, 0x02663fff] PGTABLE
[ 0.000000] BRK [0x02664000, 0x02664fff] PGTABLE
[ 0.000000] BRK [0x02665000, 0x02665fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11fe00000-0x11fffffff]
[ 0.000000] [mem 0x11fe00000-0x11fffffff] page 2M
[ 0.000000] BRK [0x02666000, 0x02666fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fdfffff]
[ 0.000000] [mem 0x11c000000-0x11fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[ 0.000000] [mem 0x100000000-0x11bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xdfffdfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xdfdfffff] page 2M
[ 0.000000] [mem 0xdfe00000-0xdfffdfff] page 4k
[ 0.000000] RAMDISK: [mem 0x70b06000-0x7fffffff]
[ 0.000000] ACPI: RSDP 00000000000fd880 000014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 00000000dfffe380 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 00000000dfffff80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 00000000dfffe3c0 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528)
[ 0.000000] ACPI: FACS 00000000dfffff40 000040
[ 0.000000] ACPI: SSDT 00000000dffff6e0 000858 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 00000000dffff5b0 000090 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 00000000dffff570 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5f3000 ( fee00000)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
[ 0.000000] NODE_DATA [mem 0x11fff7000-0x11fffbfff]
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 1:1ffef001, boot clock
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b600000-ffff88011f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x11fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xdfffdfff]
[ 0.000000] node 0: [mem 0x100000000-0x11fffffff]
[ 0.000000] On node 0 totalpages: 1048476
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14272 pages used for memmap
[ 0.000000] DMA32 zone: 913406 pages, LIFO batch:31
[ 0.000000] Normal zone: 2048 pages used for memmap
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5f3000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffffffff5f2000 (fec00000)
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfffe000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfeffbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xfffbffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s81088 r8192 d21312 u524288
[ 0.000000] pcpu-alloc: s81088 r8192 d21312 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] kvm-clock: cpu 0, msr 1:1ffef001, primary cpu clock
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 11fc0d040
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032071
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: user=lkp job=/lkp/scheduled/vpx-1/bisect_ltp-syscalls-x86_64-lkp-68a25f08c9bec07ad95e55a01b127168e43aed84-0.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/vmlinuz-3.14.0-rc1-00027-g68a25f0 kconfig=x86_64-lkp commit=68a25f08c9bec07ad95e55a01b127168e43aed84 bm_initrd=/lkp/benchmarks/ltp.cgz modules_initrd=/kernel/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/modules.cgz max_uptime=1725 RESULT_ROOT=/lkp/result/vpx/micro/ltp/syscalls/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/0 initrd=/kernel-tests/initrd/lkp-rootfs.cgz root=/dev/ram0 ip=::::vpx-1::dhcp oops=panic earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled panic=10 softlockup_panic=1 nmi_watchdog=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 3787676K/4193904K available (10464K kernel code, 1246K rwdata, 4168K rodata, 1436K init, 1752K bss, 406228K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000]
[ 0.000000]
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] ACPI: Core revision 20131218
[ 0.000000] ACPI: All ACPI Tables successfully acquired
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] bootconsole [earlyser0] disabled
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.14.0-rc1-00027-g68a25f0 (kbuild@inn) (gcc version 4.8.1 (Debian 4.8.1-8) ) #1 SMP Sat Feb 8 15:01:51 CST 2014
[ 0.000000] Command line: user=lkp job=/lkp/scheduled/vpx-1/bisect_ltp-syscalls-x86_64-lkp-68a25f08c9bec07ad95e55a01b127168e43aed84-0.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/vmlinuz-3.14.0-rc1-00027-g68a25f0 kconfig=x86_64-lkp commit=68a25f08c9bec07ad95e55a01b127168e43aed84 bm_initrd=/lkp/benchmarks/ltp.cgz modules_initrd=/kernel/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/modules.cgz max_uptime=1725 RESULT_ROOT=/lkp/result/vpx/micro/ltp/syscalls/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/0 initrd=/kernel-tests/initrd/lkp-rootfs.cgz root=/dev/ram0 ip=::::vpx-1::dhcp oops=panic earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled panic=10 softlockup_panic=1 nmi_watchdog=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfffdfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dfffe000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xdfffe max_arch_pfn = 0x400000000
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] found SMP MP-table at [mem 0x000fda90-0x000fda9f] mapped at [ffff8800000fda90]
[ 0.000000] mpc: fdaa0-fdbe4
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02663000, 0x02663fff] PGTABLE
[ 0.000000] BRK [0x02664000, 0x02664fff] PGTABLE
[ 0.000000] BRK [0x02665000, 0x02665fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11fe00000-0x11fffffff]
[ 0.000000] [mem 0x11fe00000-0x11fffffff] page 2M
[ 0.000000] BRK [0x02666000, 0x02666fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fdfffff]
[ 0.000000] [mem 0x11c000000-0x11fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[ 0.000000] [mem 0x100000000-0x11bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xdfffdfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xdfdfffff] page 2M
[ 0.000000] [mem 0xdfe00000-0xdfffdfff] page 4k
[ 0.000000] RAMDISK: [mem 0x70b06000-0x7fffffff]
[ 0.000000] ACPI: RSDP 00000000000fd880 000014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 00000000dfffe380 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 00000000dfffff80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 00000000dfffe3c0 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528)
[ 0.000000] ACPI: FACS 00000000dfffff40 000040
[ 0.000000] ACPI: SSDT 00000000dffff6e0 000858 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 00000000dffff5b0 000090 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 00000000dffff570 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5f3000 ( fee00000)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
[ 0.000000] NODE_DATA [mem 0x11fff7000-0x11fffbfff]
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 1:1ffef001, boot clock
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b600000-ffff88011f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x11fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xdfffdfff]
[ 0.000000] node 0: [mem 0x100000000-0x11fffffff]
[ 0.000000] On node 0 totalpages: 1048476
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14272 pages used for memmap
[ 0.000000] DMA32 zone: 913406 pages, LIFO batch:31
[ 0.000000] Normal zone: 2048 pages used for memmap
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5f3000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffffffff5f2000 (fec00000)
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfffe000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfeffbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xfffbffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s81088 r8192 d21312 u524288
[ 0.000000] pcpu-alloc: s81088 r8192 d21312 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] kvm-clock: cpu 0, msr 1:1ffef001, primary cpu clock
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 11fc0d040
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032071
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: user=lkp job=/lkp/scheduled/vpx-1/bisect_ltp-syscalls-x86_64-lkp-68a25f08c9bec07ad95e55a01b127168e43aed84-0.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/vmlinuz-3.14.0-rc1-00027-g68a25f0 kconfig=x86_64-lkp commit=68a25f08c9bec07ad95e55a01b127168e43aed84 bm_initrd=/lkp/benchmarks/ltp.cgz modules_initrd=/kernel/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/modules.cgz max_uptime=1725 RESULT_ROOT=/lkp/result/vpx/micro/ltp/syscalls/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/0 initrd=/kernel-tests/initrd/lkp-rootfs.cgz root=/dev/ram0 ip=::::vpx-1::dhcp oops=panic earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled panic=10 softlockup_panic=1 nmi_watchdog=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 3787676K/4193904K available (10464K kernel code, 1246K rwdata, 4168K rodata, 1436K init, 1752K bss, 406228K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000]
[ 0.000000]
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] ACPI: Core revision 20131218
[ 0.000000] ACPI: All ACPI Tables successfully acquired
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] bootconsole [earlyser0] disabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 2693.600 MHz processor
[ 0.008000] Calibrating delay loop (skipped) preset value.. 5387.20 BogoMIPS (lpj=10774400)
[ 0.008000] pid_max: default: 32768 minimum: 301
[ 0.008000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010861] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.013410] Mount-cache hash table entries: 256
[ 0.014536] Initializing cgroup subsys memory
[ 0.015340] Initializing cgroup subsys devices
[ 0.016005] Initializing cgroup subsys freezer
[ 0.016803] Initializing cgroup subsys blkio
[ 0.017609] Initializing cgroup subsys perf_event
[ 0.018459] Initializing cgroup subsys hugetlb
[ 0.019319] mce: CPU supports 10 MCE banks
[ 0.020041] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.020041] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.020041] tlb_flushall_shift: 6
[ 0.022535] Freeing SMP alternatives memory: 44K (ffffffff824a0000 - ffffffff824ab000)
[ 0.028713] ftrace: allocating 39928 entries in 156 pages
[ 0.040168] Getting VERSION: 50014
[ 0.040913] Getting VERSION: 50014
[ 0.041614] Getting ID: 0
[ 0.042239] Getting ID: ff000000
[ 0.044010] Getting LVT0: 8700
[ 0.044701] Getting LVT1: 8400
[ 0.045406] enabled ExtINT on CPU#0
[ 0.046762] ENABLING IO-APIC IRQs
[ 0.047475] init IO_APIC IRQs
[ 0.048004] apic 0 pin 0 not connected
[ 0.048742] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[ 0.050251] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[ 0.052015] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[ 0.053493] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[ 0.054965] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[ 0.056014] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[ 0.057475] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[ 0.058904] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[ 0.060014] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[ 0.061472] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[ 0.062916] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[ 0.064014] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[ 0.065484] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[ 0.068014] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[ 0.069467] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[ 0.070925] apic 0 pin 16 not connected
[ 0.072002] apic 0 pin 17 not connected
[ 0.072741] apic 0 pin 18 not connected
[ 0.073480] apic 0 pin 19 not connected
[ 0.074238] apic 0 pin 20 not connected
[ 0.074971] apic 0 pin 21 not connected
[ 0.075702] apic 0 pin 22 not connected
[ 0.076002] apic 0 pin 23 not connected
[ 0.076887] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.078008] smpboot: CPU0: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01)
[ 0.080003] Using local APIC timer interrupts.
[ 0.080003] calibrating APIC timer ...
[ 0.084000] ... lapic delta = 6249883
[ 0.084000] ... PM-Timer delta = 357987
[ 0.084000] ... PM-Timer result ok
[ 0.084000] ..... delta 6249883
[ 0.084000] ..... mult: 268430430
[ 0.084000] ..... calibration result: 3999925
[ 0.084000] ..... CPU clock speed is 2693.2624 MHz.
[ 0.084000] ..... host bus clock speed is 999.3925 MHz.
[ 0.084056] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only.
[ 0.087677] x86: Booting SMP configuration:
[ 0.088003] .... node #0, CPUs: #1
[ 0.008000] kvm-clock: cpu 1, msr 1:1ffef041, secondary cpu clock
[ 0.008000] masked ExtINT on CPU#1
[ 0.104022] KVM setup async PF for cpu 1
[ 0.105259] #2
[ 0.105259] kvm-stealtime: cpu 1, msr 11fc8d040
[ 0.008000] kvm-clock: cpu 2, msr 1:1ffef081, secondary cpu clock
[ 0.008000] masked ExtINT on CPU#2
[ 0.120020] KVM setup async PF for cpu 2
[ 0.121005] #3
[ 0.121005] kvm-stealtime: cpu 2, msr 11fd0d040
[ 0.008000] kvm-clock: cpu 3, msr 1:1ffef0c1, secondary cpu clock
[ 0.008000] masked ExtINT on CPU#3
[ 0.136043] x86: Booted up 1 node, 4 CPUs
[ 0.136023] KVM setup async PF for cpu 3
[ 0.136023] kvm-stealtime: cpu 3, msr 11fd8d040
[ 0.138450] smpboot: Total of 4 processors activated (21548.80 BogoMIPS)
[ 0.140184] devtmpfs: initialized
[ 0.145004] xor: measuring software checksum speed
[ 0.184011] prefetch64-sse: 188.000 MB/sec
[ 0.224003] generic_sse: 184.000 MB/sec
[ 0.224896] xor: using function: prefetch64-sse (188.000 MB/sec)
[ 0.225882] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.227272] NET: Registered protocol family 16
[ 0.228564] cpuidle: using governor ladder
[ 0.228861] cpuidle: using governor menu
[ 0.232345] ACPI: bus type PCI registered
[ 0.233159] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.234218] PCI: Using configuration type 1 for base access
[ 0.260127] bio: create slab <bio-0> at 0
[ 0.328004] raid6: sse2x1 8368 MB/s
[ 0.396010] raid6: sse2x2 10609 MB/s
[ 0.464004] raid6: sse2x4 12381 MB/s
[ 0.464852] raid6: using algorithm sse2x4 (12381 MB/s)
[ 0.465736] raid6: using intx1 recovery algorithm
[ 0.466662] ACPI: Added _OSI(Module Device)
[ 0.467473] ACPI: Added _OSI(Processor Device)
[ 0.468012] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.468913] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.471433] ACPI: Interpreter enabled
[ 0.472007] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
[ 0.473778] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[ 0.476023] ACPI: (supports S0 S3 S4 S5)
[ 0.476840] ACPI: Using IOAPIC for interrupt routing
[ 0.477752] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.477872] ACPI: No dock devices found.
[ 0.484189] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.488008] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.489149] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.490345] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.492289] acpiphp: Slot [3] registered
[ 0.492876] acpiphp: Slot [4] registered
[ 0.492876] acpiphp: Slot [5] registered
[ 0.492876] acpiphp: Slot [6] registered
[ 0.496051] acpiphp: Slot [7] registered
[ 0.496871] acpiphp: Slot [8] registered
[ 0.496872] acpiphp: Slot [9] registered
[ 0.496872] acpiphp: Slot [10] registered
[ 0.500062] acpiphp: Slot [11] registered
[ 0.500871] acpiphp: Slot [12] registered
[ 0.500880] acpiphp: Slot [13] registered
[ 0.500888] acpiphp: Slot [14] registered
[ 0.500888] acpiphp: Slot [15] registered
[ 0.504048] acpiphp: Slot [16] registered
[ 0.504877] acpiphp: Slot [17] registered
[ 0.504886] acpiphp: Slot [18] registered
[ 0.504886] acpiphp: Slot [19] registered
[ 0.508058] acpiphp: Slot [20] registered
[ 0.508880] acpiphp: Slot [21] registered
[ 0.508880] acpiphp: Slot [22] registered
[ 0.508880] acpiphp: Slot [23] registered
[ 0.508880] acpiphp: Slot [24] registered
[ 0.512053] acpiphp: Slot [25] registered
[ 0.512869] acpiphp: Slot [26] registered
[ 0.512877] acpiphp: Slot [27] registered
[ 0.512878] acpiphp: Slot [28] registered
[ 0.516058] acpiphp: Slot [29] registered
[ 0.516870] acpiphp: Slot [30] registered
[ 0.516875] acpiphp: Slot [31] registered
[ 0.516875] PCI host bridge to bus 0000:00
[ 0.517658] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.520004] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.521053] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.522097] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.524003] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
[ 0.525165] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.526506] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.528057] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.531797] pci 0000:00:01.1: reg 0x20: [io 0xc1c0-0xc1cf]
[ 0.533597] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.536308] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 0.537798] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.539108] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
[ 0.544618] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
[ 0.548604] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff]
[ 0.556043] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[ 0.557672] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[ 0.557988] pci 0000:00:03.0: reg 0x10: [mem 0xfeba0000-0xfebbffff]
[ 0.560969] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f]
[ 0.568005] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
[ 0.572178] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[ 0.576572] pci 0000:00:04.0: reg 0x10: [io 0xc040-0xc07f]
[ 0.578477] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff]
[ 0.584808] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[ 0.586003] pci 0000:00:05.0: reg 0x10: [io 0xc080-0xc0bf]
[ 0.588542] pci 0000:00:05.0: reg 0x14: [mem 0xfebf2000-0xfebf2fff]
[ 0.594652] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000
[ 0.596537] pci 0000:00:06.0: reg 0x10: [io 0xc0c0-0xc0ff]
[ 0.598408] pci 0000:00:06.0: reg 0x14: [mem 0xfebf3000-0xfebf3fff]
[ 0.604770] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000
[ 0.606000] pci 0000:00:07.0: reg 0x10: [io 0xc100-0xc13f]
[ 0.608527] pci 0000:00:07.0: reg 0x14: [mem 0xfebf4000-0xfebf4fff]
[ 0.614693] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000
[ 0.617053] pci 0000:00:08.0: reg 0x10: [io 0xc140-0xc17f]
[ 0.618904] pci 0000:00:08.0: reg 0x14: [mem 0xfebf5000-0xfebf5fff]
[ 0.624773] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000
[ 0.626027] pci 0000:00:09.0: reg 0x10: [io 0xc180-0xc1bf]
[ 0.629016] pci 0000:00:09.0: reg 0x14: [mem 0xfebf6000-0xfebf6fff]
[ 0.635128] pci 0000:00:0a.0: [8086:25ab] type 00 class 0x088000
[ 0.636564] pci 0000:00:0a.0: reg 0x10: [mem 0xfebf7000-0xfebf700f]
[ 0.640921] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.641756] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.644041] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.645415] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.646655] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 0.648224] ACPI: Enabled 16 GPEs in block 00 to 0F
[ 0.649291] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.649472] vgaarb: loaded
[ 0.652015] vgaarb: bridge control possible 0000:00:02.0
[ 0.653098] SCSI subsystem initialized
[ 0.653098] libata version 3.00 loaded.
[ 0.653098] ACPI: bus type USB registered
[ 0.656068] usbcore: registered new interface driver usbfs
[ 0.656993] usbcore: registered new interface driver hub
[ 0.656993] usbcore: registered new device driver usb
[ 0.656993] pps_core: LinuxPPS API ver. 1 registered
[ 0.660012] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.661675] PTP clock support registered
[ 0.661675] EDAC MC: Ver: 3.0.0
[ 0.664206] PCI: Using ACPI for IRQ routing
[ 0.664807] PCI: pci_cache_line_size set to 64 bytes
[ 0.665832] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.666800] e820: reserve RAM buffer [mem 0xdfffe000-0xdfffffff]
[ 0.668609] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.669703] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.670817] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.676136] Switched to clocksource kvm-clock
[ 0.690892] pnp: PnP ACPI init
[ 0.691599] ACPI: bus type PNP registered
[ 0.692435] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:15)
[ 0.694040] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.695073] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:15)
[ 0.696761] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.697811] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:15)
[ 0.699413] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.700506] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:15)
[ 0.701952] pnp 00:03: [dma 2]
[ 0.702763] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.703799] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:15)
[ 0.705452] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.706500] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:15)
[ 0.708072] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.709298] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.710390] pnp: PnP ACPI: found 7 devices
[ 0.711151] ACPI: bus type PNP unregistered
[ 0.726994] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.727920] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.728856] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.729839] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff]
[ 0.730903] NET: Registered protocol family 2
[ 0.731915] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.733520] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.734859] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.735963] TCP: reno registered
[ 0.736753] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.737754] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.738850] NET: Registered protocol family 1
[ 0.739947] RPC: Registered named UNIX socket transport module.
[ 0.740988] RPC: Registered udp transport module.
[ 0.741802] RPC: Registered tcp transport module.
[ 0.742605] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.743581] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.744575] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.745510] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.746470] pci 0000:00:02.0: Boot video device
[ 0.747306] PCI: CLS 0 bytes, default 64
[ 0.748179] Trying to unpack rootfs image as initramfs...
[ 5.136387] Freeing initrd memory: 250856K (ffff880070b06000 - ffff880080000000)
[ 5.137924] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 5.138983] software IO TLB [mem 0xdbffe000-0xdfffe000] (64MB) mapped at [ffff8800dbffe000-ffff8800dfffdfff]
[ 5.141259] kvm: no hardware support
[ 5.142636] Scanning for low memory corruption every 60 seconds
[ 5.144008] camellia-x86_64: performance on this CPU would be suboptimal: disabling camellia-x86_64.
[ 5.145755] blowfish-x86_64: performance on this CPU would be suboptimal: disabling blowfish-x86_64.
[ 5.147599] twofish-x86_64-3way: performance on this CPU would be suboptimal: disabling twofish-x86_64-3way.
[ 5.150280] sha1_ssse3: Neither AVX nor SSSE3 is available/usable.
[ 5.151347] PCLMULQDQ-NI instructions are not detected.
[ 5.152352] AVX or AES-NI instructions are not detected.
[ 5.153322] AVX instructions are not detected.
[ 5.154180] AVX instructions are not detected.
[ 5.155033] AVX instructions are not detected.
[ 5.155894] AVX instructions are not detected.
[ 5.159427] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 5.181878] bounce pool size: 64 pages
[ 5.182706] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 5.192319] VFS: Disk quotas dquot_6.5.2
[ 5.193286] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 5.197428] NFS: Registering the id_resolver key type
[ 5.198373] Key type id_resolver registered
[ 5.199211] Key type id_legacy registered
[ 5.200058] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 5.201184] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 5.202972] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 5.204100] fuse init (API version 7.22)
[ 5.205383] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 5.210836] msgmni has been set to 7887
[ 5.218290] NET: Registered protocol family 38
[ 5.219184] Key type asymmetric registered
[ 5.220317] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 5.221948] io scheduler noop registered
[ 5.222778] io scheduler deadline registered
[ 5.223646] io scheduler cfq registered (default)
[ 5.225137] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 5.226435] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 5.227829] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 5.229412] ACPI: Power Button [PWRF]
[ 5.230659] GHES: HEST is not enabled!
[ 5.231953] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 5.233021] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:15)
[ 5.236155] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 5.237203] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:15)
[ 5.240477] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 5.243386] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 5.251650] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 5.274184] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 5.277643] Non-volatile memory driver v1.3
[ 5.282397] brd: module loaded
[ 5.285367] loop: module loaded
[ 5.286301] virtio-pci 0000:00:04.0: irq 40 for MSI/MSI-X
[ 5.287282] virtio-pci 0000:00:04.0: irq 41 for MSI/MSI-X
[ 5.288435] blk-mq: CPU -> queue map
[ 5.289212] CPU 0 -> Queue 0
[ 5.289921] CPU 1 -> Queue 0
[ 5.290639] CPU 2 -> Queue 0
[ 5.291357] CPU 3 -> Queue 0
[ 5.293111] vda: unknown partition table
[ 5.295903] virtio-pci 0000:00:05.0: irq 42 for MSI/MSI-X
[ 5.296935] virtio-pci 0000:00:05.0: irq 43 for MSI/MSI-X
[ 5.298113] blk-mq: CPU -> queue map
[ 5.298888] CPU 0 -> Queue 0
[ 5.299610] CPU 1 -> Queue 0
[ 5.300341] CPU 2 -> Queue 0
[ 5.301058] CPU 3 -> Queue 0
[ 5.302831] vdb: unknown partition table
[ 5.305520] virtio-pci 0000:00:06.0: irq 44 for MSI/MSI-X
[ 5.306500] virtio-pci 0000:00:06.0: irq 45 for MSI/MSI-X
[ 5.307609] blk-mq: CPU -> queue map
[ 5.308391] CPU 0 -> Queue 0
[ 5.309099] CPU 1 -> Queue 0
[ 5.309804] CPU 2 -> Queue 0
[ 5.315680] CPU 3 -> Queue 0
[ 5.317231] vdc: unknown partition table
[ 5.319839] virtio-pci 0000:00:07.0: irq 46 for MSI/MSI-X
[ 5.320870] virtio-pci 0000:00:07.0: irq 47 for MSI/MSI-X
[ 5.321985] blk-mq: CPU -> queue map
[ 5.322755] CPU 0 -> Queue 0
[ 5.323456] CPU 1 -> Queue 0
[ 5.324174] CPU 2 -> Queue 0
[ 5.324874] CPU 3 -> Queue 0
[ 5.326243] vdd: unknown partition table
[ 5.328930] virtio-pci 0000:00:08.0: irq 48 for MSI/MSI-X
[ 5.329929] virtio-pci 0000:00:08.0: irq 49 for MSI/MSI-X
[ 5.331028] blk-mq: CPU -> queue map
[ 5.331805] CPU 0 -> Queue 0
[ 5.332558] CPU 1 -> Queue 0
[ 5.333306] CPU 2 -> Queue 0
[ 5.334018] CPU 3 -> Queue 0
[ 5.335678] vde: unknown partition table
[ 5.338447] virtio-pci 0000:00:09.0: irq 50 for MSI/MSI-X
[ 5.339461] virtio-pci 0000:00:09.0: irq 51 for MSI/MSI-X
[ 5.340639] blk-mq: CPU -> queue map
[ 5.341435] CPU 0 -> Queue 0
[ 5.342169] CPU 1 -> Queue 0
[ 5.342899] CPU 2 -> Queue 0
[ 5.343629] CPU 3 -> Queue 0
[ 5.345312] vdf: unknown partition table
[ 5.347787] lkdtm: No crash points registered, enable through debugfs
[ 5.349535] Loading iSCSI transport class v2.0-870.
[ 5.351493] Adaptec aacraid driver 1.2-0[30200]-ms
[ 5.352485] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 5.353855] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.12-k.
[ 5.355617] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 5.357321] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 5.358576] megasas: 06.700.06.00-rc1 Sat. Aug. 31 17:00:00 PDT 2013
[ 5.359844] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 5.361026] RocketRAID 3xxx/4xxx Controller driver v1.8
[ 5.362535] ata_piix 0000:00:01.1: version 2.13
[ 5.365795] scsi0 : ata_piix
[ 5.366761] scsi1 : ata_piix
[ 5.367613] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc1c0 irq 14
[ 5.368744] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc1c8 irq 15
[ 5.370805] tun: Universal TUN/TAP device driver, 1.6
[ 5.371734] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 5.373195] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[ 5.374463] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 5.375453] Copyright (c) 2007 Atheros Corporation.
[ 5.376743] dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
[ 5.377965] v1.01-e (2.4 port) Sep-11-2006 Donald Becker <becker@scyld.com>
[ 5.377965] http://www.scyld.com/network/drivers.html
[ 5.380263] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
[ 5.381522] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 5.382566] e100: Copyright(c) 1999-2006 Intel Corporation
[ 5.383615] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 5.384783] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 5.524483] ata2.01: NODEV after polling detection
[ 5.525541] ata2.00: ATAPI: QEMU DVD-ROM, 1.6.0, max UDMA/100
[ 5.526799] ata2.00: configured for MWDMA2
[ 5.528547] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 1.6. PQ: 0 ANSI: 5
[ 5.531099] scsi 1:0:0:0: Attached scsi generic sg0 type 5
[ 5.708368] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
[ 5.709426] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[ 5.710677] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 5.711611] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 5.712849] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
[ 5.713886] igb: Copyright (c) 2007-2013 Intel Corporation.
[ 5.715017] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.19.1-k
[ 5.716464] ixgbe: Copyright (c) 1999-2013 Intel Corporation.
[ 5.717640] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[ 5.718710] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[ 5.719993] sky2: driver version 1.30
[ 5.722293] usbcore: registered new interface driver catc
[ 5.723300] usbcore: registered new interface driver kaweth
[ 5.724247] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 5.725777] usbcore: registered new interface driver pegasus
[ 5.726800] usbcore: registered new interface driver rtl8150
[ 5.727826] usbcore: registered new interface driver asix
[ 5.728876] usbcore: registered new interface driver ax88179_178a
[ 5.729937] usbcore: registered new interface driver cdc_ether
[ 5.730975] usbcore: registered new interface driver r815x
[ 5.731975] usbcore: registered new interface driver cdc_eem
[ 5.733073] usbcore: registered new interface driver dm9601
[ 5.734088] usbcore: registered new interface driver smsc75xx
[ 5.735131] usbcore: registered new interface driver smsc95xx
[ 5.736198] usbcore: registered new interface driver gl620a
[ 5.737213] usbcore: registered new interface driver net1080
[ 5.738227] usbcore: registered new interface driver plusb
[ 5.739224] usbcore: registered new interface driver rndis_host
[ 5.740329] usbcore: registered new interface driver cdc_subset
[ 5.741379] usbcore: registered new interface driver zaurus
[ 5.742388] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 5.743889] usbcore: registered new interface driver int51x1
[ 5.744923] usbcore: registered new interface driver ipheth
[ 5.745935] usbcore: registered new interface driver sierra_net
[ 5.746982] usbcore: registered new interface driver cdc_ncm
[ 5.747918] Fusion MPT base driver 3.04.20
[ 5.748711] Copyright (c) 1999-2008 LSI Corporation
[ 5.749583] Fusion MPT SPI Host driver 3.04.20
[ 5.750509] Fusion MPT FC Host driver 3.04.20
[ 5.751407] Fusion MPT SAS Host driver 3.04.20
[ 5.752330] Fusion MPT misc device (ioctl) driver 3.04.20
[ 5.753347] mptctl: Registered with Fusion MPT base driver
[ 5.754270] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 5.755358] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.756391] ehci-pci: EHCI PCI platform driver
[ 5.757273] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.758264] ohci-pci: OHCI PCI platform driver
[ 5.759129] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.760307] usbcore: registered new interface driver usb-storage
[ 5.761334] usbcore: registered new interface driver ums-alauda
[ 5.762347] usbcore: registered new interface driver ums-datafab
[ 5.763365] usbcore: registered new interface driver ums-freecom
[ 5.764412] usbcore: registered new interface driver ums-isd200
[ 5.765429] usbcore: registered new interface driver ums-jumpshot
[ 5.766454] usbcore: registered new interface driver ums-sddr09
[ 5.767468] usbcore: registered new interface driver ums-sddr55
[ 5.768495] usbcore: registered new interface driver ums-usbat
[ 5.769509] usbcore: registered new interface driver usbtest
[ 5.770576] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 5.772754] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.773702] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.775269] mousedev: PS/2 mouse device common for all mice
[ 5.776925] rtc_cmos 00:00: RTC can wake from S4
[ 5.777938] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 5.779897] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 5.781075] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[ 5.782343] i6300esb: Intel 6300ESB WatchDog Timer Driver v0.05
[ 5.783619] i6300esb: initialized (0xffffc9000072a000). heartbeat=30 sec (nowayout=0)
[ 5.785176] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 5.786202] iTCO_vendor_support: vendor-support=0
[ 5.787089] watchdog: Software Watchdog: cannot register miscdev on minor=130 (err=-16).
[ 5.788578] watchdog: Software Watchdog: a legacy watchdog module is probably present.
[ 5.790258] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
[ 5.792030] md: linear personality registered for level -1
[ 5.792920] md: raid0 personality registered for level 0
[ 5.793777] md: raid1 personality registered for level 1
[ 5.794631] md: raid10 personality registered for level 10
[ 5.795669] md: raid6 personality registered for level 6
[ 5.796623] md: raid5 personality registered for level 5
[ 5.797587] md: raid4 personality registered for level 4
[ 5.798448] md: multipath personality registered for level -4
[ 5.799348] md: faulty personality registered for level -5
[ 5.801302] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 5.803124] device-mapper: multipath: version 1.6.0 loaded
[ 5.804057] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 5.805075] device-mapper: cache-policy-mq: version 1.2.0 loaded
[ 5.805999] device-mapper: cache cleaner: version 1.0.0 loaded
[ 5.807182] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 5.810201] usbcore: registered new interface driver usbhid
[ 5.811090] usbhid: USB HID core driver
[ 5.811940] TCP: bic registered
[ 5.812666] Initializing XFRM netlink socket
[ 5.813775] NET: Registered protocol family 10
[ 5.814752] sit: IPv6 over IPv4 tunneling driver
[ 5.815804] NET: Registered protocol family 17
[ 5.816645] 8021q: 802.1Q VLAN Support v1.8
[ 5.818185] sctp: Hash tables configured (established 65536 bind 65536)
[ 5.819443] Key type dns_resolver registered
[ 5.821111]
[ 5.821111] printing PIC contents
[ 5.822219] ... PIC IMR: ffff
[ 5.822859] ... PIC IRR: 9113
[ 5.823505] ... PIC ISR: 0000
[ 5.824163] ... PIC ELCR: 0c00
[ 5.824856] printing local APIC contents on CPU#0/0:
[ 5.825740] ... APIC ID: 00000000 (0)
[ 5.826519] ... APIC VERSION: 00050014
[ 5.828845] ... APIC TASKPRI: 00000000 (00)
[ 5.828845] ... APIC PROCPRI: 00000000
[ 5.828845] ... APIC LDR: 01000000
[ 5.828845] ... APIC DFR: ffffffff
[ 5.828845] ... APIC SPIV: 000001ff
[ 5.828845] ... APIC ISR field:
[ 5.828845] 0000000000000000000000000000000000000000000000000000000000000000
[ 5.828845] ... APIC TMR field:
[ 5.828845] 0000000002000000000000000000000000000000000000000000000000000000
[ 5.828845] ... APIC IRR field:
[ 5.828845] 0000000000000000000000000000000000000000000000000000000020000000
[ 5.828845] ... APIC ESR: 00000000
[ 5.828845] ... APIC ICR: 000008fd
[ 5.828845] ... APIC ICR2: 02000000
[ 5.828845] ... APIC LVTT: 000000ef
[ 5.828845] ... APIC LVTPC: 00010000
[ 5.828845] ... APIC LVT0: 00010700
[ 5.828845] ... APIC LVT1: 00000400
[ 5.828845] ... APIC LVTERR: 000000fe
[ 5.828845] ... APIC TMICT: 01405f24
[ 5.828845] ... APIC TMCCT: 011540b3
[ 5.828845] ... APIC TDCR: 00000003
[ 5.828845]
[ 5.851187] number of MP IRQ sources: 15.
[ 5.851920] number of IO-APIC #0 registers: 24.
[ 5.852713] testing the IO APIC.......................
[ 5.853568] IO APIC #0......
[ 5.854192] .... register #00: 00000000
[ 5.854900] ....... : physical APIC id: 00
[ 5.855667] ....... : Delivery Type: 0
[ 5.856406] ....... : LTS : 0
[ 5.857133] .... register #01: 00170011
[ 5.857844] ....... : max redirection entries: 17
[ 5.858673] ....... : PRQ implemented: 0
[ 5.859429] ....... : IO APIC version: 11
[ 5.860202] .... register #02: 00000000
[ 5.860916] ....... : arbitration: 00
[ 5.861648] .... IRQ redirection table:
[ 5.862370] 1 0 0 0 0 0 0 00
[ 5.863152] 0 0 0 0 0 1 1 31
[ 5.863933] 0 0 0 0 0 1 1 30
[ 5.864735] 0 0 0 0 0 1 1 33
[ 5.865523] 1 0 0 0 0 1 1 34
[ 5.866310] 1 1 0 0 0 1 1 35
[ 5.867099] 0 0 0 0 0 1 1 36
[ 5.867881] 0 0 0 0 0 1 1 37
[ 5.868678] 0 0 0 0 0 1 1 38
[ 5.869468] 0 1 0 0 0 1 1 39
[ 5.870258] 1 1 0 0 0 1 1 3A
[ 5.871048] 1 1 0 0 0 1 1 3B
[ 5.871829] 0 0 0 0 0 1 1 3C
[ 5.872626] 0 0 0 0 0 1 1 3D
[ 5.873423] 0 0 0 0 0 1 1 3E
[ 5.874209] 0 0 0 0 0 1 1 3F
[ 5.874990] 1 0 0 0 0 0 0 00
[ 5.875776] 1 0 0 0 0 0 0 00
[ 5.876576] 1 0 0 0 0 0 0 00
[ 5.877365] 1 0 0 0 0 0 0 00
[ 5.878150] 1 0 0 0 0 0 0 00
[ 5.878932] 1 0 0 0 0 0 0 00
[ 5.879716] 1 0 0 0 0 0 0 00
[ 5.880515] 1 0 0 0 0 0 0 00
[ 5.881295] IRQ to pin mappings:
[ 5.881950] IRQ0 -> 0:2
[ 5.882657] IRQ1 -> 0:1
[ 5.883356] IRQ3 -> 0:3
[ 5.884072] IRQ4 -> 0:4
[ 5.884770] IRQ5 -> 0:5
[ 5.885472] IRQ6 -> 0:6
[ 5.886175] IRQ7 -> 0:7
[ 5.886877] IRQ8 -> 0:8
[ 5.887575] IRQ9 -> 0:9
[ 5.888287] IRQ10 -> 0:10
[ 5.889007] IRQ11 -> 0:11
[ 5.889730] IRQ12 -> 0:12
[ 5.890449] IRQ13 -> 0:13
[ 5.891171] IRQ14 -> 0:14
[ 5.891889] IRQ15 -> 0:15
[ 5.892625] .................................... done.
[ 5.893827] registered taskstats version 1
[ 5.895116] rtc_cmos 00:00: setting system clock to 2014-02-08 15:07:04 UTC (1391872024)
[ 5.896571] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
[ 5.901346] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.902265] 8021q: adding VLAN 0 to HW filter on device eth0
[ 6.140119] tsc: Refined TSC clocksource calibration: 2693.410 MHz
[ 6.402416] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[ 7.904542] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 7.908104] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 7.924091] Sending DHCP requests ., OK
[ 7.984102] IP-Config: Got DHCP answer from 10.0.2.2, my address is 10.0.2.15
[ 7.985288] IP-Config: Complete:
[ 7.985952] device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=10.0.2.15, mask=255.255.255.0, gw=10.0.2.2
[ 7.987500] host=vpx-1, domain=, nis-domain=(none)
[ 7.988374] bootserver=10.0.2.2, rootserver=10.0.2.2, rootpath=
[ 7.989033] nameserver0=10.0.2.3
[ 7.990163] PM: Hibernation image not present or could not be loaded.
[ 7.992520] Freeing unused kernel memory: 1436K (ffffffff82339000 - ffffffff824a0000)
[ 7.993922] Write protecting the kernel read-only data: 18432k
[ 7.998771] Freeing unused kernel memory: 1812K (ffff880001a3b000 - ffff880001c00000)
[ 8.003865] Freeing unused kernel memory: 1976K (ffff880002012000 - ffff880002200000)
[ 8.200963] microcode: CPU0 sig=0xf61, pf=0x1, revision=0x1
[ 8.202368] microcode: CPU1 sig=0xf61, pf=0x1, revision=0x1
[ 8.203425] microcode: CPU2 sig=0xf61, pf=0x1, revision=0x1
[ 8.207585] microcode: CPU3 sig=0xf61, pf=0x1, revision=0x1
[ 8.211558] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 8.514165] random: vgscan urandom read with 20 bits of entropy available
==> /lkp/lkp/src/tmp/run_log <==
Kernel tests: Boot OK!
PATH=/sbin:/usr/sbin:/bin:/usr/bin
==> /lkp/lkp/src/tmp/err_log <==
==> /lkp/lkp/src/tmp/run_log <==
downloading latest lkp src code
Kernel tests: Boot OK 2!
/lkp/lkp/src/bin/run-lkp
LKP_SRC_DIR=/lkp/lkp/src
RESULT_ROOT=/lkp/result/vpx/micro/ltp/syscalls/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/0
job=/lkp/scheduled/vpx-1/bisect_ltp-syscalls-x86_64-lkp-68a25f08c9bec07ad95e55a01b127168e43aed84-0.yaml
run-job /lkp/scheduled/vpx-1/bisect_ltp-syscalls-x86_64-lkp-68a25f08c9bec07ad95e55a01b127168e43aed84-0.yaml
run: pre-test
run: /lkp/lkp/src/monitors/event/wait pre-test
run: /lkp/lkp/src/monitors/wrapper uptime
run: /lkp/lkp/src/monitors/wrapper iostat
run: /lkp/lkp/src/monitors/wrapper vmstat
run: /lkp/lkp/src/monitors/wrapper numa-numastat
run: /lkp/lkp/src/monitors/wrapper numa-vmstat
run: /lkp/lkp/src/monitors/wrapper numa-meminfo
run: /lkp/lkp/src/monitors/wrapper proc-vmstat
run: /lkp/lkp/src/monitors/wrapper meminfo
run: /lkp/lkp/src/monitors/wrapper slabinfo
run: /lkp/lkp/src/monitors/wrapper interrupts
run: /lkp/lkp/src/monitors/wrapper lock_stat
run: /lkp/lkp/src/monitors/wrapper latency_stats
run: /lkp/lkp/src/monitors/wrapper softirqs
run: /lkp/lkp/src/monitors/wrapper bdi_dev_mapping
run: /lkp/lkp/src/monitors/wrapper pmeter
run: /lkp/lkp/src/monitors/wrapper diskstats
run: /lkp/lkp/src/monitors/wrapper zoneinfo
run: /lkp/lkp/src/monitors/wrapper energy
run: /lkp/lkp/src/monitors/wrapper cpuidle
run: /lkp/lkp/src/monitors/wrapper turbostat
run: /usr/bin/time -v -o /lkp/lkp/src/tmp/time /lkp/lkp/src/tests/micro/wrapper ltp
[ 62.012562] random: nonblocking pool is initialized
[ 85.767028] warning: `capget01' uses 32-bit capabilities (legacy support in use)
[ 382.932150] Bits 55-60 of /proc/PID/pagemap entries are about to stop being page-shift some time soon. See the linux/Documentation/vm/pagemap.txt for details.
[ 466.193846] BUG: unable to handle kernel paging request at fffffff27b92dd20
[ 466.195225] IP: [<ffffffff81190d7f>] put_page+0x5/0x28
[ 466.196263] PGD 220d067 PUD 0
[ 466.197137] Oops: 0000 [#1] SMP
[ 466.197261] Modules linked in: msr microcode processor
[ 466.197261] CPU: 2 PID: 30338 Comm: process_vm01 Not tainted 3.14.0-rc1-00027-g68a25f0 #1
[ 466.197261] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 466.197261] task: ffff88007c11ecc0 ti: ffff88007b92c000 task.ti: ffff88007b92c000
[ 466.197261] RIP: 0010:[<ffffffff81190d7f>] [<ffffffff81190d7f>] put_page+0x5/0x28
[ 466.197261] RSP: 0018:ffff88007b92dc98 EFLAGS: 00010286
[ 466.197261] RAX: fffffffffffffff0 RBX: 0000000000000000 RCX: 0000000000001000
[ 466.197261] RDX: 0000000000000000 RSI: 0000000097230000 RDI: fffffff27b92dd20
[ 466.197261] RBP: ffff88007b92dde8 R08: 0000000000000000 R09: 00007fe39722f001
[ 466.197261] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88007c11ecc0
[ 466.197261] R13: ffff88007b92dd40 R14: fffffffffffffff2 R15: ffff88007b92de10
[ 466.197261] FS: 00007fe397228700(0000) GS:ffff88011fd00000(0000) knlGS:0000000000000000
[ 466.197261] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 466.197261] CR2: fffffff27b92dd20 CR3: 000000007f537000 CR4: 00000000000006e0
[ 466.197261] Stack:
[ 466.197261] ffffffff811b7ea1 ffff88007b92dd40 0000000000000000 000000000000000d
[ 466.197261] ffffffff81f7ad76 fffffff27b92dd20 ffff88007baa4420 0000000000000001
[ 466.197261] 0000000000000000 ffff88007b92deb0 0000000000001000 0000000000000001
[ 466.197261] Call Trace:
[ 466.197261] [<ffffffff811b7ea1>] ? process_vm_rw_core.isra.1+0x39f/0x444
[ 466.197261] [<ffffffff811aadbb>] ? handle_mm_fault+0x9e9/0xc9c
[ 466.197261] [<ffffffff811a65f0>] ? might_fault+0x3e/0x40
[ 466.197261] [<ffffffff811e2264>] ? rw_copy_check_uvector+0x6f/0xfd
[ 466.197261] [<ffffffff811b8017>] process_vm_rw+0xd1/0x117
[ 466.197261] [<ffffffff811b05ae>] ? do_mmap_pgoff+0x2e1/0x34c
[ 466.197261] [<ffffffff8119d9fe>] ? vm_mmap_pgoff+0x72/0x94
[ 466.197261] [<ffffffff81a2eb5e>] ? do_page_fault+0xe/0x10
[ 466.197261] [<ffffffff8151472b>] ? trace_hardirqs_on_thunk+0x3a/0x3c
[ 466.197261] [<ffffffff811b8073>] SyS_process_vm_readv+0x16/0x18
[ 466.197261] [<ffffffff81a32b29>] system_call_fastpath+0x16/0x1b
[ 466.197261] Code: 45 fc 65 48 01 04 25 50 f3 00 00 c9 c3 0f 1f 44 00 00 55 31 d2 48 c7 c6 20 01 19 81 48 89 e5 e8 d4 fe ff ff 5d c3 0f 1f 44 00 00 <48> f7 07 00 c0 00 00 55 48 89 e5 74 07 e8 d6 fa ff ff eb 0d f0
[ 466.197261] RIP [<ffffffff81190d7f>] put_page+0x5/0x28
[ 466.197261] RSP <ffff88007b92dc98>
[ 466.197261] CR2: fffffff27b92dd20
[ 466.197261] ---[ end trace c832eda068281bf7 ]---
[ 466.197261] Kernel panic - not syncing: Fatal exception
[ 466.197261] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff)
[ 466.197261] Rebooting in 10 seconds..
Elapsed time: 190
numactl --preferred=0 --physcpubind=4-7 qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/vmlinuz-3.14.0-rc1-00027-g68a25f0 -append 'user=lkp job=/lkp/scheduled/vpx-1/bisect_ltp-syscalls-x86_64-lkp-68a25f08c9bec07ad95e55a01b127168e43aed84-0.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/vmlinuz-3.14.0-rc1-00027-g68a25f0 kconfig=x86_64-lkp commit=68a25f08c9bec07ad95e55a01b127168e43aed84 bm_initrd=/lkp/benchmarks/ltp.cgz modules_initrd=/kernel/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/modules.cgz max_uptime=1725 RESULT_ROOT=/lkp/result/vpx/micro/ltp/syscalls/x86_64-lkp/68a25f08c9bec07ad95e55a01b127168e43aed84/0 initrd=/kernel-tests/initrd/lkp-rootfs.cgz root=/dev/ram0 ip=::::vpx-1::dhcp oops=panic earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled panic=10 softlockup_panic=1 nmi_watchdog=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal' -initrd /fs/sdb1/initrd-vpx-1 -m 4G -smp 4 -net nic,vlan=1,model=e1000 -net user,vlan=1,hostfwd=tcp::9334-:22 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -drive file=/fs/sdb1/disk0-vpx-1,media=disk,if=virtio -drive file=/fs/sdb1/disk1-vpx-1,media=disk,if=virtio -drive file=/fs/sdb1/disk2-vpx-1,media=disk,if=virtio -drive file=/fs/sdb1/disk3-vpx-1,media=disk,if=virtio -drive file=/fs/sdb1/disk4-vpx-1,media=disk,if=virtio -drive file=/fs/sdb1/disk5-vpx-1,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-vpx-1 -serial file:/dev/shm/kboot/serial-vpx-1 -daemonize -display none -monitor null
next reply other threads:[~2014-02-10 11:22 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-10 11:22 Fengguang Wu [this message]
2014-02-10 11:25 ` [process_vm_access] BUG: unable to handle kernel paging request at fffffff27b92dd20 Fengguang Wu
2014-02-10 20:04 ` Al Viro
2014-02-12 0:27 ` Andrew Morton
2014-02-12 0:38 ` Al Viro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140210112231.GA11951@localhost \
--to=fengguang.wu@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=viro@zeniv.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.