From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 1/6] arch: kona: Initial commit of kona-common architecture code
Date: Mon, 10 Feb 2014 15:29:18 -0500 [thread overview]
Message-ID: <20140210202918.GX7049@bill-the-cat> (raw)
In-Reply-To: <20140210094458.0b1d8a33@lilith>
On Mon, Feb 10, 2014 at 09:44:58AM +0100, Albert ARIBAUD wrote:
> Hi Darwin,
>
> On Thu, 6 Feb 2014 19:23:03 -0800, Darwin Rambo <drambo@broadcom.com>
> wrote:
>
> > The Kona architecture is present on a number of Broadcom mobile SoCs
> > including the bcm281xx family of chips.
> >
> > Signed-off-by: Darwin Rambo <drambo@broadcom.com>
> > Reviewed-by: Steve Rae <srae@broadcom.com>
> > Reviewed-by: Tim Kryger <tkryger@linaro.org>
> > ---
> > arch/arm/cpu/armv7/Makefile | 1 +
> > arch/arm/cpu/armv7/kona-common/Makefile | 9 ++++++++
> > arch/arm/cpu/armv7/kona-common/clk-stubs.c | 21 +++++++++++++++++
> > arch/arm/cpu/armv7/kona-common/hwinit-common.c | 16 +++++++++++++
> > arch/arm/cpu/armv7/kona-common/s_init.c | 12 ++++++++++
> > arch/arm/include/asm/kona-common/clk.h | 29 ++++++++++++++++++++++++
> > arch/arm/include/asm/kona-common/kona_sdhci.h | 12 ++++++++++
> > 7 files changed, 100 insertions(+)
> > create mode 100644 arch/arm/cpu/armv7/kona-common/Makefile
> > create mode 100644 arch/arm/cpu/armv7/kona-common/clk-stubs.c
> > create mode 100644 arch/arm/cpu/armv7/kona-common/hwinit-common.c
> > create mode 100644 arch/arm/cpu/armv7/kona-common/s_init.c
> > create mode 100644 arch/arm/include/asm/kona-common/clk.h
> > create mode 100644 arch/arm/include/asm/kona-common/kona_sdhci.h
> >
> > diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
> > index 0467d00..119ebb3 100644
> > --- a/arch/arm/cpu/armv7/Makefile
> > +++ b/arch/arm/cpu/armv7/Makefile
> > @@ -23,6 +23,7 @@ obj-y += nonsec_virt.o
> > obj-y += virt-v7.o
> > endif
> >
> > +obj-$(CONFIG_KONA) += kona-common/
> > obj-$(CONFIG_OMAP_COMMON) += omap-common/
> > obj-$(CONFIG_TEGRA) += tegra-common/
> >
> > diff --git a/arch/arm/cpu/armv7/kona-common/Makefile b/arch/arm/cpu/armv7/kona-common/Makefile
> > new file mode 100644
> > index 0000000..8af6f2c
> > --- /dev/null
> > +++ b/arch/arm/cpu/armv7/kona-common/Makefile
> > @@ -0,0 +1,9 @@
> > +#
> > +# Copyright 2013 Broadcom Corporation. All rights reserved.
> > +#
> > +# SPDX-License-Identifier: GPL-2.0+
>
> Is the "All rights reserved" mention compatible with GPL-2.0+? Ditto
> for other occurrences.
Checking out some debian-legal archives, it's meaningless these days, so
lets drop it from the next go-round. Any other comments about the
series?
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140210/da71d178/attachment.pgp>
next prev parent reply other threads:[~2014-02-10 20:29 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-07 3:23 [U-Boot] [PATCH v3 0/6] Introducing the Broadcom bcm281xx Architecture Darwin Rambo
2014-02-07 3:23 ` [U-Boot] [PATCH v3 1/6] arch: kona: Initial commit of kona-common architecture code Darwin Rambo
2014-02-10 8:44 ` Albert ARIBAUD
2014-02-10 20:29 ` Tom Rini [this message]
2014-02-07 3:23 ` [U-Boot] [PATCH v3 2/6] arch: bcm281xx: Initial commit of bcm281xx " Darwin Rambo
2014-02-07 3:23 ` [U-Boot] [PATCH v3 3/6] gpio: kona: Add Kona gpio driver Darwin Rambo
2014-02-07 3:23 ` [U-Boot] [PATCH v3 4/6] i2c: kona: Add Kona I2C driver Darwin Rambo
2014-02-07 3:23 ` [U-Boot] [PATCH v3 5/6] mmc: kona: Add Kona mmc driver Darwin Rambo
2014-02-07 3:23 ` [U-Boot] [PATCH v3 6/6] board: bcm28155_ap: Add board files Darwin Rambo
2014-02-07 3:39 ` [U-Boot] [PATCH v3 0/6] Introducing the Broadcom bcm281xx Architecture Darwin Rambo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140210202918.GX7049@bill-the-cat \
--to=trini@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.