From: Magnus Damm <magnus.damm@gmail.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH 01/03] ARM: shmobile: Add r8a7791 legacy SDHI clocks
Date: Wed, 12 Feb 2014 04:26:01 +0000 [thread overview]
Message-ID: <20140212042601.10516.21405.sendpatchset@w520> (raw)
From: Magnus Damm <damm@opensource.se>
Add legacy r8a7791 SDHI clocks. This to allow the SDHI devices
to be used by legacy Koelsch board support.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
arch/arm/mach-shmobile/clock-r8a7791.c | 51 ++++++++++++++++++++++++++++++--
1 file changed, 49 insertions(+), 2 deletions(-)
--- 0001/arch/arm/mach-shmobile/clock-r8a7791.c
+++ work/arch/arm/mach-shmobile/clock-r8a7791.c 2014-02-10 16:01:10.000000000 +0900
@@ -61,6 +61,7 @@
#define MSTPSR1 IOMEM(0xe6150038)
#define MSTPSR2 IOMEM(0xe6150040)
+#define MSTPSR3 IOMEM(0xe6150048)
#define MSTPSR5 IOMEM(0xe615003c)
#define MSTPSR7 IOMEM(0xe61501c4)
#define MSTPSR8 IOMEM(0xe61509a0)
@@ -69,8 +70,8 @@
#define MODEMR 0xE6160060
#define SDCKCR 0xE6150074
-#define SD2CKCR 0xE6150078
-#define SD3CKCR 0xE615007C
+#define SD1CKCR 0xE6150078
+#define SD2CKCR 0xE615026c
#define MMC0CKCR 0xE6150240
#define MMC1CKCR 0xE6150244
#define SSPCKCR 0xE6150248
@@ -134,6 +135,39 @@ static struct clk *main_clks[] = {
&zs_clk,
};
+/* SDHI (DIV4) clock */
+static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, 24, 0, 36, 48, 10 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+ .divisors = divisors,
+ .nr_divisors = ARRAY_SIZE(divisors),
+};
+
+static struct clk_div4_table div4_table = {
+ .div_mult_table = &div4_div_mult_table,
+};
+
+enum {
+ DIV4_SDH, DIV4_SD0,
+ DIV4_NR
+};
+
+static struct clk div4_clks[DIV4_NR] = {
+ [DIV4_SDH] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 8, 0x0dff, CLK_ENABLE_ON_INIT),
+ [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1de0, CLK_ENABLE_ON_INIT),
+};
+
+/* DIV6 clocks */
+enum {
+ DIV6_SD1, DIV6_SD2,
+ DIV6_NR
+};
+
+static struct clk div6_clks[DIV6_NR] = {
+ [DIV6_SD1] = SH_CLK_DIV6(&pll1_div2_clk, SD1CKCR, 0),
+ [DIV6_SD2] = SH_CLK_DIV6(&pll1_div2_clk, SD2CKCR, 0),
+};
+
/* MSTP */
enum {
MSTP931, MSTP930, MSTP929, MSTP928, MSTP927, MSTP925,
@@ -144,6 +178,7 @@ enum {
MSTP726, MSTP724, MSTP723, MSTP721, MSTP720,
MSTP719, MSTP718, MSTP715, MSTP714,
MSTP522,
+ MSTP314, MSTP312, MSTP311,
MSTP216, MSTP207, MSTP206,
MSTP204, MSTP203, MSTP202, MSTP1105, MSTP1106, MSTP1107,
MSTP124,
@@ -174,6 +209,9 @@ static struct clk mstp_clks[MSTP_NR] = {
[MSTP715] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 15, MSTPSR7, 0), /* SCIF4 */
[MSTP714] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 14, MSTPSR7, 0), /* SCIF5 */
[MSTP522] = SH_CLK_MSTP32_STS(&extal_clk, SMSTPCR5, 22, MSTPSR5, 0), /* Thermal */
+ [MSTP314] = SH_CLK_MSTP32_STS(&div4_clks[DIV4_SD0], SMSTPCR3, 14, MSTPSR3, 0), /* SDHI0 */
+ [MSTP312] = SH_CLK_MSTP32_STS(&div6_clks[DIV6_SD1], SMSTPCR3, 12, MSTPSR3, 0), /* SDHI1 */
+ [MSTP311] = SH_CLK_MSTP32_STS(&div6_clks[DIV6_SD2], SMSTPCR3, 11, MSTPSR3, 0), /* SDHI2 */
[MSTP216] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 16, MSTPSR2, 0), /* SCIFB2 */
[MSTP207] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 7, MSTPSR2, 0), /* SCIFB1 */
[MSTP206] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 6, MSTPSR2, 0), /* SCIFB0 */
@@ -224,6 +262,9 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh-sci.12", &mstp_clks[MSTP1105]), /* SCIFA3 */
CLKDEV_DEV_ID("sh-sci.13", &mstp_clks[MSTP1106]), /* SCIFA4 */
CLKDEV_DEV_ID("sh-sci.14", &mstp_clks[MSTP1107]), /* SCIFA5 */
+ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]),
+ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP312]),
+ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]),
CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
CLKDEV_DEV_ID("qspi.0", &mstp_clks[MSTP917]),
CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
@@ -286,6 +327,12 @@ void __init r8a7791_clock_init(void)
ret = clk_register(main_clks[k]);
if (!ret)
+ ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+ if (!ret)
+ ret = sh_clk_div6_register(div6_clks, DIV6_NR);
+
+ if (!ret)
ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
reply other threads:[~2014-02-12 4:26 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140212042601.10516.21405.sendpatchset@w520 \
--to=magnus.damm@gmail.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.