* [PATCH v2 0/2] regulator: core: Fix ops->enable/disable usage @ 2014-02-20 11:07 ` Markus Pargmann 0 siblings, 0 replies; 14+ messages in thread From: Markus Pargmann @ 2014-02-20 11:07 UTC (permalink / raw) To: linux-arm-kernel Hi, These two patches replace all ops->enable/disable by _regulator_do_disable/enable function calls. These wrappers also handle gpio regulators. v2 enables all regulators with delays and I added a patch to fix all direct disable calls. Regards, Markus Markus Pargmann (2): regulator: core: Replace direct ops->enable usage regulator: core: Replace direct ops->disable usage drivers/regulator/core.c | 44 +++++++++++++++++++------------------------- 1 file changed, 19 insertions(+), 25 deletions(-) -- 1.8.5.3 ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v2 0/2] regulator: core: Fix ops->enable/disable usage @ 2014-02-20 11:07 ` Markus Pargmann 0 siblings, 0 replies; 14+ messages in thread From: Markus Pargmann @ 2014-02-20 11:07 UTC (permalink / raw) To: Mark Brown, Liam Girdwood Cc: linux-kernel, linux-arm-kernel, kernel, Markus Pargmann Hi, These two patches replace all ops->enable/disable by _regulator_do_disable/enable function calls. These wrappers also handle gpio regulators. v2 enables all regulators with delays and I added a patch to fix all direct disable calls. Regards, Markus Markus Pargmann (2): regulator: core: Replace direct ops->enable usage regulator: core: Replace direct ops->disable usage drivers/regulator/core.c | 44 +++++++++++++++++++------------------------- 1 file changed, 19 insertions(+), 25 deletions(-) -- 1.8.5.3 ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v2 1/2] regulator: core: Replace direct ops->enable usage 2014-02-20 11:07 ` Markus Pargmann @ 2014-02-20 11:07 ` Markus Pargmann -1 siblings, 0 replies; 14+ messages in thread From: Markus Pargmann @ 2014-02-20 11:07 UTC (permalink / raw) To: linux-arm-kernel There are some direct ops->enable in the regulator core driver. This is a potential issue as the function _regulator_do_enable() handles gpio regulators and the normal ops->enable calls. These gpio regulators are simply ignored when ops->enable is called directly. One possible bug is that boot-on and always-on gpio regulators are not enabled on registration. This patch replaces all ops->enable calls by _regulator_do_enable. Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by: Markus Pargmann <mpa@pengutronix.de> --- drivers/regulator/core.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 16a309e..017f5cb 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -953,6 +953,8 @@ static int machine_constraints_current(struct regulator_dev *rdev, return 0; } +static int _regulator_do_enable(struct regulator_dev *rdev); + /** * set_machine_constraints - sets regulator constraints * @rdev: regulator source @@ -1013,9 +1015,8 @@ static int set_machine_constraints(struct regulator_dev *rdev, /* If the constraints say the regulator should be on at this point * and we have control then make sure it is enabled. */ - if ((rdev->constraints->always_on || rdev->constraints->boot_on) && - ops->enable) { - ret = ops->enable(rdev); + if (rdev->constraints->always_on || rdev->constraints->boot_on) { + ret = _regulator_do_enable(rdev); if (ret < 0) { rdev_err(rdev, "failed to enable\n"); goto out; @@ -3633,9 +3634,8 @@ int regulator_suspend_finish(void) struct regulator_ops *ops = rdev->desc->ops; mutex_lock(&rdev->mutex); - if ((rdev->use_count > 0 || rdev->constraints->always_on) && - ops->enable) { - error = ops->enable(rdev); + if (rdev->use_count > 0 || rdev->constraints->always_on) { + error = _regulator_do_enable(rdev); if (error) ret = error; } else { -- 1.8.5.3 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 1/2] regulator: core: Replace direct ops->enable usage @ 2014-02-20 11:07 ` Markus Pargmann 0 siblings, 0 replies; 14+ messages in thread From: Markus Pargmann @ 2014-02-20 11:07 UTC (permalink / raw) To: Mark Brown, Liam Girdwood Cc: linux-kernel, linux-arm-kernel, kernel, Markus Pargmann, stable There are some direct ops->enable in the regulator core driver. This is a potential issue as the function _regulator_do_enable() handles gpio regulators and the normal ops->enable calls. These gpio regulators are simply ignored when ops->enable is called directly. One possible bug is that boot-on and always-on gpio regulators are not enabled on registration. This patch replaces all ops->enable calls by _regulator_do_enable. Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by: Markus Pargmann <mpa@pengutronix.de> --- drivers/regulator/core.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 16a309e..017f5cb 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -953,6 +953,8 @@ static int machine_constraints_current(struct regulator_dev *rdev, return 0; } +static int _regulator_do_enable(struct regulator_dev *rdev); + /** * set_machine_constraints - sets regulator constraints * @rdev: regulator source @@ -1013,9 +1015,8 @@ static int set_machine_constraints(struct regulator_dev *rdev, /* If the constraints say the regulator should be on at this point * and we have control then make sure it is enabled. */ - if ((rdev->constraints->always_on || rdev->constraints->boot_on) && - ops->enable) { - ret = ops->enable(rdev); + if (rdev->constraints->always_on || rdev->constraints->boot_on) { + ret = _regulator_do_enable(rdev); if (ret < 0) { rdev_err(rdev, "failed to enable\n"); goto out; @@ -3633,9 +3634,8 @@ int regulator_suspend_finish(void) struct regulator_ops *ops = rdev->desc->ops; mutex_lock(&rdev->mutex); - if ((rdev->use_count > 0 || rdev->constraints->always_on) && - ops->enable) { - error = ops->enable(rdev); + if (rdev->use_count > 0 || rdev->constraints->always_on) { + error = _regulator_do_enable(rdev); if (error) ret = error; } else { -- 1.8.5.3 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 2/2] regulator: core: Replace direct ops->disable usage 2014-02-20 11:07 ` Markus Pargmann @ 2014-02-20 11:07 ` Markus Pargmann -1 siblings, 0 replies; 14+ messages in thread From: Markus Pargmann @ 2014-02-20 11:07 UTC (permalink / raw) To: linux-arm-kernel There are many places where ops->disable is called directly. Instead we should use _regulator_do_disable() which also handles gpio regulators. Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by: Markus Pargmann <mpa@pengutronix.de> --- drivers/regulator/core.c | 32 +++++++++++++------------------- 1 file changed, 13 insertions(+), 19 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 017f5cb..a0c916f 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1908,8 +1908,6 @@ static int _regulator_do_disable(struct regulator_dev *rdev) trace_regulator_disable_complete(rdev_get_name(rdev)); - _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE, - NULL); return 0; } @@ -1933,6 +1931,8 @@ static int _regulator_disable(struct regulator_dev *rdev) rdev_err(rdev, "failed to disable\n"); return ret; } + _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE, + NULL); } rdev->use_count = 0; @@ -1985,20 +1985,16 @@ static int _regulator_force_disable(struct regulator_dev *rdev) { int ret = 0; - /* force disable */ - if (rdev->desc->ops->disable) { - /* ah well, who wants to live forever... */ - ret = rdev->desc->ops->disable(rdev); - if (ret < 0) { - rdev_err(rdev, "failed to force disable\n"); - return ret; - } - /* notify other consumers that power has been forced off */ - _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE | - REGULATOR_EVENT_DISABLE, NULL); + ret = _regulator_do_disable(rdev); + if (ret < 0) { + rdev_err(rdev, "failed to force disable\n"); + return ret; } - return ret; + _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE | + REGULATOR_EVENT_DISABLE, NULL); + + return 0; } /** @@ -3641,12 +3637,10 @@ int regulator_suspend_finish(void) } else { if (!have_full_constraints()) goto unlock; - if (!ops->disable) - goto unlock; if (!_regulator_is_enabled(rdev)) goto unlock; - error = ops->disable(rdev); + error = _regulator_do_disable(rdev); if (error) ret = error; } @@ -3820,7 +3814,7 @@ static int __init regulator_init_complete(void) ops = rdev->desc->ops; c = rdev->constraints; - if (!ops->disable || (c && c->always_on)) + if (c && c->always_on) continue; mutex_lock(&rdev->mutex); @@ -3841,7 +3835,7 @@ static int __init regulator_init_complete(void) /* We log since this may kill the system if it * goes wrong. */ rdev_info(rdev, "disabling\n"); - ret = ops->disable(rdev); + ret = _regulator_do_disable(rdev); if (ret != 0) rdev_err(rdev, "couldn't disable: %d\n", ret); } else { -- 1.8.5.3 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 2/2] regulator: core: Replace direct ops->disable usage @ 2014-02-20 11:07 ` Markus Pargmann 0 siblings, 0 replies; 14+ messages in thread From: Markus Pargmann @ 2014-02-20 11:07 UTC (permalink / raw) To: Mark Brown, Liam Girdwood Cc: linux-kernel, linux-arm-kernel, kernel, Markus Pargmann, stable There are many places where ops->disable is called directly. Instead we should use _regulator_do_disable() which also handles gpio regulators. Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by: Markus Pargmann <mpa@pengutronix.de> --- drivers/regulator/core.c | 32 +++++++++++++------------------- 1 file changed, 13 insertions(+), 19 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 017f5cb..a0c916f 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1908,8 +1908,6 @@ static int _regulator_do_disable(struct regulator_dev *rdev) trace_regulator_disable_complete(rdev_get_name(rdev)); - _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE, - NULL); return 0; } @@ -1933,6 +1931,8 @@ static int _regulator_disable(struct regulator_dev *rdev) rdev_err(rdev, "failed to disable\n"); return ret; } + _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE, + NULL); } rdev->use_count = 0; @@ -1985,20 +1985,16 @@ static int _regulator_force_disable(struct regulator_dev *rdev) { int ret = 0; - /* force disable */ - if (rdev->desc->ops->disable) { - /* ah well, who wants to live forever... */ - ret = rdev->desc->ops->disable(rdev); - if (ret < 0) { - rdev_err(rdev, "failed to force disable\n"); - return ret; - } - /* notify other consumers that power has been forced off */ - _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE | - REGULATOR_EVENT_DISABLE, NULL); + ret = _regulator_do_disable(rdev); + if (ret < 0) { + rdev_err(rdev, "failed to force disable\n"); + return ret; } - return ret; + _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE | + REGULATOR_EVENT_DISABLE, NULL); + + return 0; } /** @@ -3641,12 +3637,10 @@ int regulator_suspend_finish(void) } else { if (!have_full_constraints()) goto unlock; - if (!ops->disable) - goto unlock; if (!_regulator_is_enabled(rdev)) goto unlock; - error = ops->disable(rdev); + error = _regulator_do_disable(rdev); if (error) ret = error; } @@ -3820,7 +3814,7 @@ static int __init regulator_init_complete(void) ops = rdev->desc->ops; c = rdev->constraints; - if (!ops->disable || (c && c->always_on)) + if (c && c->always_on) continue; mutex_lock(&rdev->mutex); @@ -3841,7 +3835,7 @@ static int __init regulator_init_complete(void) /* We log since this may kill the system if it * goes wrong. */ rdev_info(rdev, "disabling\n"); - ret = ops->disable(rdev); + ret = _regulator_do_disable(rdev); if (ret != 0) rdev_err(rdev, "couldn't disable: %d\n", ret); } else { -- 1.8.5.3 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 2/2] regulator: core: Replace direct ops->disable usage 2014-02-20 11:07 ` Markus Pargmann @ 2014-02-20 12:03 ` Markus Pargmann -1 siblings, 0 replies; 14+ messages in thread From: Markus Pargmann @ 2014-02-20 12:03 UTC (permalink / raw) To: linux-arm-kernel On Thu, Feb 20, 2014 at 12:07:52PM +0100, Markus Pargmann wrote: > There are many places where ops->disable is called directly. Instead we > should use _regulator_do_disable() which also handles gpio regulators. > > Cc: <stable@vger.kernel.org> # 3.10+ > Signed-off-by: Markus Pargmann <mpa@pengutronix.de> > --- > drivers/regulator/core.c | 32 +++++++++++++------------------- > 1 file changed, 13 insertions(+), 19 deletions(-) > > diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c > index 017f5cb..a0c916f 100644 > --- a/drivers/regulator/core.c > +++ b/drivers/regulator/core.c ... > @@ -3641,12 +3637,10 @@ int regulator_suspend_finish(void) > } else { > if (!have_full_constraints()) > goto unlock; > - if (!ops->disable) > - goto unlock; > if (!_regulator_is_enabled(rdev)) > goto unlock; > > - error = ops->disable(rdev); > + error = _regulator_do_disable(rdev); ops is unused and creates a compile warning. I will resend later with the 'ops' variable removed from the function. Regards, Markus -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140220/5e70776e/attachment.sig> ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v2 2/2] regulator: core: Replace direct ops->disable usage @ 2014-02-20 12:03 ` Markus Pargmann 0 siblings, 0 replies; 14+ messages in thread From: Markus Pargmann @ 2014-02-20 12:03 UTC (permalink / raw) To: Mark Brown, Liam Girdwood; +Cc: linux-kernel, linux-arm-kernel, kernel, stable [-- Attachment #1: Type: text/plain, Size: 1405 bytes --] On Thu, Feb 20, 2014 at 12:07:52PM +0100, Markus Pargmann wrote: > There are many places where ops->disable is called directly. Instead we > should use _regulator_do_disable() which also handles gpio regulators. > > Cc: <stable@vger.kernel.org> # 3.10+ > Signed-off-by: Markus Pargmann <mpa@pengutronix.de> > --- > drivers/regulator/core.c | 32 +++++++++++++------------------- > 1 file changed, 13 insertions(+), 19 deletions(-) > > diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c > index 017f5cb..a0c916f 100644 > --- a/drivers/regulator/core.c > +++ b/drivers/regulator/core.c ... > @@ -3641,12 +3637,10 @@ int regulator_suspend_finish(void) > } else { > if (!have_full_constraints()) > goto unlock; > - if (!ops->disable) > - goto unlock; > if (!_regulator_is_enabled(rdev)) > goto unlock; > > - error = ops->disable(rdev); > + error = _regulator_do_disable(rdev); ops is unused and creates a compile warning. I will resend later with the 'ops' variable removed from the function. Regards, Markus -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 836 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v2 2/2] regulator: core: Replace direct ops->disable usage 2014-02-20 11:07 ` Markus Pargmann @ 2014-02-20 12:51 ` Mark Brown -1 siblings, 0 replies; 14+ messages in thread From: Mark Brown @ 2014-02-20 12:51 UTC (permalink / raw) To: linux-arm-kernel On Thu, Feb 20, 2014 at 12:07:52PM +0100, Markus Pargmann wrote: > --- a/drivers/regulator/core.c > +++ b/drivers/regulator/core.c > @@ -1908,8 +1908,6 @@ static int _regulator_do_disable(struct regulator_dev *rdev) > > trace_regulator_disable_complete(rdev_get_name(rdev)); > > - _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE, > - NULL); > return 0; > } > > @@ -1933,6 +1931,8 @@ static int _regulator_disable(struct regulator_dev *rdev) > rdev_err(rdev, "failed to disable\n"); > return ret; > } > + _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE, > + NULL); > } > > rdev->use_count = 0; This change doesn't seem obviously related? -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140220/8f0705dc/attachment-0001.sig> ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v2 2/2] regulator: core: Replace direct ops->disable usage @ 2014-02-20 12:51 ` Mark Brown 0 siblings, 0 replies; 14+ messages in thread From: Mark Brown @ 2014-02-20 12:51 UTC (permalink / raw) To: Markus Pargmann Cc: Liam Girdwood, linux-kernel, linux-arm-kernel, kernel, stable [-- Attachment #1: Type: text/plain, Size: 715 bytes --] On Thu, Feb 20, 2014 at 12:07:52PM +0100, Markus Pargmann wrote: > --- a/drivers/regulator/core.c > +++ b/drivers/regulator/core.c > @@ -1908,8 +1908,6 @@ static int _regulator_do_disable(struct regulator_dev *rdev) > > trace_regulator_disable_complete(rdev_get_name(rdev)); > > - _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE, > - NULL); > return 0; > } > > @@ -1933,6 +1931,8 @@ static int _regulator_disable(struct regulator_dev *rdev) > rdev_err(rdev, "failed to disable\n"); > return ret; > } > + _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE, > + NULL); > } > > rdev->use_count = 0; This change doesn't seem obviously related? [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 836 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v2 2/2] regulator: core: Replace direct ops->disable usage 2014-02-20 12:51 ` Mark Brown @ 2014-02-20 13:01 ` Markus Pargmann -1 siblings, 0 replies; 14+ messages in thread From: Markus Pargmann @ 2014-02-20 13:01 UTC (permalink / raw) To: linux-arm-kernel On Thu, Feb 20, 2014 at 09:51:30PM +0900, Mark Brown wrote: > On Thu, Feb 20, 2014 at 12:07:52PM +0100, Markus Pargmann wrote: > > > --- a/drivers/regulator/core.c > > +++ b/drivers/regulator/core.c > > @@ -1908,8 +1908,6 @@ static int _regulator_do_disable(struct regulator_dev *rdev) > > > > trace_regulator_disable_complete(rdev_get_name(rdev)); > > > > - _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE, > > - NULL); > > return 0; > > } > > > > @@ -1933,6 +1931,8 @@ static int _regulator_disable(struct regulator_dev *rdev) > > rdev_err(rdev, "failed to disable\n"); > > return ret; > > } > > + _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE, > > + NULL); > > } > > > > rdev->use_count = 0; > > This change doesn't seem obviously related? I am using this function from _regulator_force_disable(), which calls _notifier_call_chain() with one additional flag "REGULATOR_EVENT_FORCE_DISABLE". To prevent calling _notifier_call_chain() twice for the force_disable case, I moved that function call out of _regulator_do_disable(). Regards, Markus -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140220/e35c4719/attachment.sig> ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v2 2/2] regulator: core: Replace direct ops->disable usage @ 2014-02-20 13:01 ` Markus Pargmann 0 siblings, 0 replies; 14+ messages in thread From: Markus Pargmann @ 2014-02-20 13:01 UTC (permalink / raw) To: Mark Brown; +Cc: Liam Girdwood, linux-kernel, linux-arm-kernel, kernel, stable [-- Attachment #1: Type: text/plain, Size: 1450 bytes --] On Thu, Feb 20, 2014 at 09:51:30PM +0900, Mark Brown wrote: > On Thu, Feb 20, 2014 at 12:07:52PM +0100, Markus Pargmann wrote: > > > --- a/drivers/regulator/core.c > > +++ b/drivers/regulator/core.c > > @@ -1908,8 +1908,6 @@ static int _regulator_do_disable(struct regulator_dev *rdev) > > > > trace_regulator_disable_complete(rdev_get_name(rdev)); > > > > - _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE, > > - NULL); > > return 0; > > } > > > > @@ -1933,6 +1931,8 @@ static int _regulator_disable(struct regulator_dev *rdev) > > rdev_err(rdev, "failed to disable\n"); > > return ret; > > } > > + _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE, > > + NULL); > > } > > > > rdev->use_count = 0; > > This change doesn't seem obviously related? I am using this function from _regulator_force_disable(), which calls _notifier_call_chain() with one additional flag "REGULATOR_EVENT_FORCE_DISABLE". To prevent calling _notifier_call_chain() twice for the force_disable case, I moved that function call out of _regulator_do_disable(). Regards, Markus -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 836 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v2 2/2] regulator: core: Replace direct ops->disable usage 2014-02-20 13:01 ` Markus Pargmann @ 2014-02-20 13:17 ` Mark Brown -1 siblings, 0 replies; 14+ messages in thread From: Mark Brown @ 2014-02-20 13:17 UTC (permalink / raw) To: linux-arm-kernel On Thu, Feb 20, 2014 at 02:01:08PM +0100, Markus Pargmann wrote: > I am using this function from _regulator_force_disable(), which calls > _notifier_call_chain() with one additional flag > "REGULATOR_EVENT_FORCE_DISABLE". To prevent calling > _notifier_call_chain() twice for the force_disable case, I moved that > function call out of _regulator_do_disable(). OK, put that in the changelog please. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140220/c13b83e8/attachment.sig> ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v2 2/2] regulator: core: Replace direct ops->disable usage @ 2014-02-20 13:17 ` Mark Brown 0 siblings, 0 replies; 14+ messages in thread From: Mark Brown @ 2014-02-20 13:17 UTC (permalink / raw) To: Markus Pargmann Cc: Liam Girdwood, linux-kernel, linux-arm-kernel, kernel, stable [-- Attachment #1: Type: text/plain, Size: 401 bytes --] On Thu, Feb 20, 2014 at 02:01:08PM +0100, Markus Pargmann wrote: > I am using this function from _regulator_force_disable(), which calls > _notifier_call_chain() with one additional flag > "REGULATOR_EVENT_FORCE_DISABLE". To prevent calling > _notifier_call_chain() twice for the force_disable case, I moved that > function call out of _regulator_do_disable(). OK, put that in the changelog please. [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 836 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2014-02-20 13:18 UTC | newest] Thread overview: 14+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-02-20 11:07 [PATCH v2 0/2] regulator: core: Fix ops->enable/disable usage Markus Pargmann 2014-02-20 11:07 ` Markus Pargmann 2014-02-20 11:07 ` [PATCH v2 1/2] regulator: core: Replace direct ops->enable usage Markus Pargmann 2014-02-20 11:07 ` Markus Pargmann 2014-02-20 11:07 ` [PATCH v2 2/2] regulator: core: Replace direct ops->disable usage Markus Pargmann 2014-02-20 11:07 ` Markus Pargmann 2014-02-20 12:03 ` Markus Pargmann 2014-02-20 12:03 ` Markus Pargmann 2014-02-20 12:51 ` Mark Brown 2014-02-20 12:51 ` Mark Brown 2014-02-20 13:01 ` Markus Pargmann 2014-02-20 13:01 ` Markus Pargmann 2014-02-20 13:17 ` Mark Brown 2014-02-20 13:17 ` Mark Brown
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.