diff for duplicates of <20140222171516.GA3610@lukather> diff --git a/a/1.txt b/N1/1.txt index 6bfcfa7..0e25a01 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -5,14 +5,14 @@ On Sat, Feb 22, 2014 at 11:09:25AM +0100, Hans de Goede wrote: > >Hi Hans, > > > >On Wed, Feb 19, 2014 at 01:01:59PM +0100, Hans de Goede wrote: -> >>From: Oliver Schinagl <oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org> +> >>From: Oliver Schinagl <oliver@schinagl.nl> > >> > >>This patch adds sunxi sata support to A10 boards that have such a connector. > >>Some boards also feature a regulator via a GPIO and support for this is also > >>added. > >> -> >>Signed-off-by: Olliver Schinagl <oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org> -> >>Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> +> >>Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> +> >>Signed-off-by: Hans de Goede <hdegoede@redhat.com> > >>--- > >> arch/arm/boot/dts/sun4i-a10-a1000.dts | 4 ++++ > >> arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 6 +++++ @@ -29,12 +29,12 @@ On Sat, Feb 22, 2014 at 11:09:25AM +0100, Hans de Goede wrote: > >> }; > >> }; > >> -> >>+ ahci: sata@01c18000 { +> >>+ ahci: sata at 01c18000 { > >>+ status = "okay"; > >>+ }; > >>+ -> >> pinctrl@01c20800 { -> >> emac_power_pin_a1000: emac_power_pin@0 { +> >> pinctrl at 01c20800 { +> >> emac_power_pin_a1000: emac_power_pin at 0 { > >> allwinner,pins = "PH15"; > >>diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts > >>index b139ee6..6df237d8 100644 @@ -52,13 +52,13 @@ On Sat, Feb 22, 2014 at 11:09:25AM +0100, Hans de Goede wrote: > >> }; > >> }; > >> -> >>+ ahci: sata@01c18000 { +> >>+ ahci: sata at 01c18000 { > >>+ target-supply = <®_ahci_5v>; > >>+ status = "okay"; > >>+ }; > >>+ -> >> pinctrl@01c20800 { -> >> led_pins_cubieboard: led_pins@0 { +> >> pinctrl at 01c20800 { +> >> led_pins_cubieboard: led_pins at 0 { > >> allwinner,pins = "PH20", "PH21"; > >>diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi > >>index 336dbec..454077a 100644 @@ -68,7 +68,7 @@ On Sat, Feb 22, 2014 at 11:09:25AM +0100, Hans de Goede wrote: > >> #size-cells = <0>; > >> }; > >> -> >>+ ahci: sata@01c18000 { +> >>+ ahci: sata at 01c18000 { > >>+ compatible = "allwinner,sun4i-a10-ahci"; > >>+ reg = <0x01c18000 0x1000>; > >>+ interrupts = <56>; @@ -76,7 +76,7 @@ On Sat, Feb 22, 2014 at 11:09:25AM +0100, Hans de Goede wrote: > >>+ status = "disabled"; > >>+ }; > >>+ -> >> intc: interrupt-controller@01c20400 { +> >> intc: interrupt-controller at 01c20400 { > >> compatible = "allwinner,sun4i-ic"; > >> reg = <0x01c20400 0x400>; > >>diff --git a/arch/arm/boot/dts/sunxi-ahci-reg.dtsi b/arch/arm/boot/dts/sunxi-ahci-reg.dtsi @@ -111,7 +111,7 @@ have to create a DTSI to define only one regulator. > another advantage of having these separate is that the gpio controlling > the regulator can be pre-populated with the reference design gpio which > is used in most boards, so that the ahci specific code in the dts -> becomes only the ahci: sata@... node. +> becomes only the ahci: sata at ... node. I understand very well the advantages of what having a reference regulators bring. What I don't understand is the benefits of having @@ -123,3 +123,10 @@ Maxime Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com +-------------- next part -------------- +A non-text attachment was scrubbed... +Name: signature.asc +Type: application/pgp-signature +Size: 836 bytes +Desc: Digital signature +URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140222/216c9a7e/attachment.sig> diff --git a/a/2.bin b/a/2.bin deleted file mode 100644 index 59ac2dd..0000000 --- a/a/2.bin +++ /dev/null @@ -1,17 +0,0 @@ ------BEGIN PGP SIGNATURE----- -Version: GnuPG v1.4.14 (GNU/Linux) - -iQIcBAEBAgAGBQJTCNsjAAoJEBx+YmzsjxAgMMgP/RLAqvGd8FLRBDuGA30Tm3Dj -7FVvmqscbLZ2wRZl4CQVZAtaOPn3sC5BaWoEXfrHjSDoNymrCGtx5k7bd4qON7PH -INbZVB4Uyot+93P/f7MabCnlXc8KuVEizza/Q0F8Q2PQ6awGxE+CwrXZ4jp8VxLR -MdD2htf4hIamk9zJzUBEtueuqK+3G7TrlF6QUGxujkvW9PkbWURX3GdtznHhC8DF -zeh0BaOYs5jyoohTlTeuCDTgKArVAgspRcYhcuygIgCMeFthjAjz/KGZMkpZKEoC -T5J63OXRNws5QY9rAoVBOHpSYLUuxHf5R8GIMmbYGO6AYNOJsUEQadUQ3C2giiTO -BYkXGZVfJSpVg2+wk+Ais3jBhyPhBXjWwfS8to0HF4/yy5oIOSQm/qWr64PZD+Pv -ZOhPjNNkVJL9Sdh++Nm1iVLs+qpaBvPvh4wtqVyiP7B9e1Gb1CjPGN4uusVDsiMo -4z0JcIch9NM0nyrSJApmBlNHS+/oiDn4qhYtDGM+0eaodxVuwAyXISFRVjzVVH25 -is8mB0b+uEJcruOkhV6hMKwOWxiLGqoURyBWjKBTnrUfzLscbNizwAvIVecOMMcB -aPaKtThFjUD9rmhcLMyyWSoKuv4922V/P3XVWVocnKeHLt/5yS68XWp28gpLiC3k -+0m2JAu2VUCqJWT5tzut -=p533 ------END PGP SIGNATURE----- diff --git a/a/2.hdr b/a/2.hdr deleted file mode 100644 index 3237378..0000000 --- a/a/2.hdr +++ /dev/null @@ -1,2 +0,0 @@ -Content-Type: application/pgp-signature; name="signature.asc" -Content-Description: Digital signature diff --git a/a/content_digest b/N1/content_digest index e88ca29..a23c245 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -2,21 +2,11 @@ "ref\01392811320-3132-18-git-send-email-hdegoede@redhat.com\0" "ref\020140221181519.GC3931@lukather\0" "ref\053087755.3090608@redhat.com\0" - "ref\053087755.3090608-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org\0" - "From\0Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>\0" - "Subject\0Re: [PATCH v6 17/18] ARM: sun4i: dt: Add ahci / sata support\0" + "From\0maxime.ripard@free-electrons.com (Maxime Ripard)\0" + "Subject\0[PATCH v6 17/18] ARM: sun4i: dt: Add ahci / sata support\0" "Date\0Sat, 22 Feb 2014 18:15:16 +0100\0" - "To\0Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>\0" - "Cc\0Tejun Heo <tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>" - Oliver Schinagl <oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org> - Richard Zhu <Hong-Xing.Zhu-KZfg59tc24xl57MIdRCFDg@public.gmane.org> - Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org> - Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> - linux-ide-u79uwXL29TY76Z2rM5mHXA@public.gmane.org - linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org - devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> - " linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org\0" - "\01:1\0" + "To\0linux-arm-kernel@lists.infradead.org\0" + "\00:1\0" "b\0" "On Sat, Feb 22, 2014 at 11:09:25AM +0100, Hans de Goede wrote:\n" "> Hi Maxime,\n" @@ -25,14 +15,14 @@ "> >Hi Hans,\n" "> >\n" "> >On Wed, Feb 19, 2014 at 01:01:59PM +0100, Hans de Goede wrote:\n" - "> >>From: Oliver Schinagl <oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org>\n" + "> >>From: Oliver Schinagl <oliver@schinagl.nl>\n" "> >>\n" "> >>This patch adds sunxi sata support to A10 boards that have such a connector.\n" "> >>Some boards also feature a regulator via a GPIO and support for this is also\n" "> >>added.\n" "> >>\n" - "> >>Signed-off-by: Olliver Schinagl <oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org>\n" - "> >>Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>\n" + "> >>Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>\n" + "> >>Signed-off-by: Hans de Goede <hdegoede@redhat.com>\n" "> >>---\n" "> >> arch/arm/boot/dts/sun4i-a10-a1000.dts | 4 ++++\n" "> >> arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 6 +++++\n" @@ -49,12 +39,12 @@ "> >> \t\t\t};\n" "> >> \t\t};\n" "> >>\n" - "> >>+\t\tahci: sata@01c18000 {\n" + "> >>+\t\tahci: sata at 01c18000 {\n" "> >>+\t\t\tstatus = \"okay\";\n" "> >>+\t\t};\n" "> >>+\n" - "> >> \t\tpinctrl@01c20800 {\n" - "> >> \t\t\temac_power_pin_a1000: emac_power_pin@0 {\n" + "> >> \t\tpinctrl at 01c20800 {\n" + "> >> \t\t\temac_power_pin_a1000: emac_power_pin at 0 {\n" "> >> \t\t\t\tallwinner,pins = \"PH15\";\n" "> >>diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts\n" "> >>index b139ee6..6df237d8 100644\n" @@ -72,13 +62,13 @@ "> >> \t\t\t};\n" "> >> \t\t};\n" "> >>\n" - "> >>+\t\tahci: sata@01c18000 {\n" + "> >>+\t\tahci: sata at 01c18000 {\n" "> >>+\t\t\ttarget-supply = <®_ahci_5v>;\n" "> >>+\t\t\tstatus = \"okay\";\n" "> >>+\t\t};\n" "> >>+\n" - "> >> \t\tpinctrl@01c20800 {\n" - "> >> \t\t\tled_pins_cubieboard: led_pins@0 {\n" + "> >> \t\tpinctrl at 01c20800 {\n" + "> >> \t\t\tled_pins_cubieboard: led_pins at 0 {\n" "> >> \t\t\t\tallwinner,pins = \"PH20\", \"PH21\";\n" "> >>diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi\n" "> >>index 336dbec..454077a 100644\n" @@ -88,7 +78,7 @@ "> >> \t\t\t#size-cells = <0>;\n" "> >> \t\t};\n" "> >>\n" - "> >>+\t\tahci: sata@01c18000 {\n" + "> >>+\t\tahci: sata at 01c18000 {\n" "> >>+\t\t\tcompatible = \"allwinner,sun4i-a10-ahci\";\n" "> >>+\t\t\treg = <0x01c18000 0x1000>;\n" "> >>+\t\t\tinterrupts = <56>;\n" @@ -96,7 +86,7 @@ "> >>+\t\t\tstatus = \"disabled\";\n" "> >>+\t\t};\n" "> >>+\n" - "> >> \t\tintc: interrupt-controller@01c20400 {\n" + "> >> \t\tintc: interrupt-controller at 01c20400 {\n" "> >> \t\t\tcompatible = \"allwinner,sun4i-ic\";\n" "> >> \t\t\treg = <0x01c20400 0x400>;\n" "> >>diff --git a/arch/arm/boot/dts/sunxi-ahci-reg.dtsi b/arch/arm/boot/dts/sunxi-ahci-reg.dtsi\n" @@ -131,7 +121,7 @@ "> another advantage of having these separate is that the gpio controlling\n" "> the regulator can be pre-populated with the reference design gpio which\n" "> is used in most boards, so that the ahci specific code in the dts\n" - "> becomes only the ahci: sata@... node.\n" + "> becomes only the ahci: sata at ... node.\n" "\n" "I understand very well the advantages of what having a reference\n" "regulators bring. What I don't understand is the benefits of having\n" @@ -142,27 +132,13 @@ "-- \n" "Maxime Ripard, Free Electrons\n" "Embedded Linux, Kernel and Android engineering\n" - http://free-electrons.com - "\01:2\0" - "fn\0signature.asc\0" - "d\0Digital signature\0" - "b\0" - "-----BEGIN PGP SIGNATURE-----\n" - "Version: GnuPG v1.4.14 (GNU/Linux)\n" - "\n" - "iQIcBAEBAgAGBQJTCNsjAAoJEBx+YmzsjxAgMMgP/RLAqvGd8FLRBDuGA30Tm3Dj\n" - "7FVvmqscbLZ2wRZl4CQVZAtaOPn3sC5BaWoEXfrHjSDoNymrCGtx5k7bd4qON7PH\n" - "INbZVB4Uyot+93P/f7MabCnlXc8KuVEizza/Q0F8Q2PQ6awGxE+CwrXZ4jp8VxLR\n" - "MdD2htf4hIamk9zJzUBEtueuqK+3G7TrlF6QUGxujkvW9PkbWURX3GdtznHhC8DF\n" - "zeh0BaOYs5jyoohTlTeuCDTgKArVAgspRcYhcuygIgCMeFthjAjz/KGZMkpZKEoC\n" - "T5J63OXRNws5QY9rAoVBOHpSYLUuxHf5R8GIMmbYGO6AYNOJsUEQadUQ3C2giiTO\n" - "BYkXGZVfJSpVg2+wk+Ais3jBhyPhBXjWwfS8to0HF4/yy5oIOSQm/qWr64PZD+Pv\n" - "ZOhPjNNkVJL9Sdh++Nm1iVLs+qpaBvPvh4wtqVyiP7B9e1Gb1CjPGN4uusVDsiMo\n" - "4z0JcIch9NM0nyrSJApmBlNHS+/oiDn4qhYtDGM+0eaodxVuwAyXISFRVjzVVH25\n" - "is8mB0b+uEJcruOkhV6hMKwOWxiLGqoURyBWjKBTnrUfzLscbNizwAvIVecOMMcB\n" - "aPaKtThFjUD9rmhcLMyyWSoKuv4922V/P3XVWVocnKeHLt/5yS68XWp28gpLiC3k\n" - "+0m2JAu2VUCqJWT5tzut\n" - "=p533\n" - "-----END PGP SIGNATURE-----\n" + "http://free-electrons.com\n" + "-------------- next part --------------\n" + "A non-text attachment was scrubbed...\n" + "Name: signature.asc\n" + "Type: application/pgp-signature\n" + "Size: 836 bytes\n" + "Desc: Digital signature\n" + URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140222/216c9a7e/attachment.sig> -bd5e35b0bfd7a5c3f18fe7c7231b7e7776a4b5441fe73a9a8c01f537883d1f69 +c218e137e3ed3cd041ca34949dcf378c942f47d527564d933cb9aad59c902b7b
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.