From: catalin.marinas@arm.com (Catalin Marinas)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH v2 1/1] arm64: Add boot time configuration of Intermediate Physical Address size
Date: Wed, 12 Mar 2014 16:54:12 +0000 [thread overview]
Message-ID: <20140312165411.GO17083@arm.com> (raw)
In-Reply-To: <CAC8NTUUJ+E-LS0iG07FXkU2=mGgHZ7e_7=9UkAOLrjsNREtfZg@mail.gmail.com>
On Tue, Mar 11, 2014 at 10:11:20AM +0000, Radha Mohan wrote:
> Any more comments?
It looks fine to me but I'd like an ack from Marc as well on the KVM
bits.
Patch below for reference. Thanks.
> On Fri, Mar 7, 2014 at 2:19 PM, <mohun106@gmail.com> wrote:
> > From: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
> >
> > ARMv8 supports a range of physical address bit sizes. The PARange bits
> > from ID_AA64MMFR0_EL1 register are read during boot-time and the
> > intermediate physical address size bits are written in the translation
> > control registers (TCR_EL1 and VTCR_EL2).
> >
> > There is no change in the VA bits and levels of translation.
> >
> > Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
> > ---
> > arch/arm64/include/asm/kvm_arm.h | 15 ++++++---------
> > arch/arm64/include/asm/pgtable-hwdef.h | 5 ++---
> > arch/arm64/kvm/hyp-init.S | 6 ++++++
> > arch/arm64/mm/proc.S | 8 +++++++-
> > 4 files changed, 21 insertions(+), 13 deletions(-)
> >
> > diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h
> > index 0eb3986..21ef48d 100644
> > --- a/arch/arm64/include/asm/kvm_arm.h
> > +++ b/arch/arm64/include/asm/kvm_arm.h
> > @@ -106,7 +106,6 @@
> >
> > /* VTCR_EL2 Registers bits */
> > #define VTCR_EL2_PS_MASK (7 << 16)
> > -#define VTCR_EL2_PS_40B (2 << 16)
> > #define VTCR_EL2_TG0_MASK (1 << 14)
> > #define VTCR_EL2_TG0_4K (0 << 14)
> > #define VTCR_EL2_TG0_64K (1 << 14)
> > @@ -129,10 +128,9 @@
> > * 64kB pages (TG0 = 1)
> > * 2 level page tables (SL = 1)
> > */
> > -#define VTCR_EL2_FLAGS (VTCR_EL2_PS_40B | VTCR_EL2_TG0_64K | \
> > - VTCR_EL2_SH0_INNER | VTCR_EL2_ORGN0_WBWA | \
> > - VTCR_EL2_IRGN0_WBWA | VTCR_EL2_SL0_LVL1 | \
> > - VTCR_EL2_T0SZ_40B)
> > +#define VTCR_EL2_FLAGS (VTCR_EL2_TG0_64K | VTCR_EL2_SH0_INNER | \
> > + VTCR_EL2_ORGN0_WBWA | VTCR_EL2_IRGN0_WBWA | \
> > + VTCR_EL2_SL0_LVL1 | VTCR_EL2_T0SZ_40B)
> > #define VTTBR_X (38 - VTCR_EL2_T0SZ_40B)
> > #else
> > /*
> > @@ -142,10 +140,9 @@
> > * 4kB pages (TG0 = 0)
> > * 3 level page tables (SL = 1)
> > */
> > -#define VTCR_EL2_FLAGS (VTCR_EL2_PS_40B | VTCR_EL2_TG0_4K | \
> > - VTCR_EL2_SH0_INNER | VTCR_EL2_ORGN0_WBWA | \
> > - VTCR_EL2_IRGN0_WBWA | VTCR_EL2_SL0_LVL1 | \
> > - VTCR_EL2_T0SZ_40B)
> > +#define VTCR_EL2_FLAGS (VTCR_EL2_TG0_4K | VTCR_EL2_SH0_INNER | \
> > + VTCR_EL2_ORGN0_WBWA | VTCR_EL2_IRGN0_WBWA | \
> > + VTCR_EL2_SL0_LVL1 | VTCR_EL2_T0SZ_40B)
> > #define VTTBR_X (37 - VTCR_EL2_T0SZ_40B)
> > #endif
> >
> > diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h
> > index b1d2e26..f7af66b 100644
> > --- a/arch/arm64/include/asm/pgtable-hwdef.h
> > +++ b/arch/arm64/include/asm/pgtable-hwdef.h
> > @@ -100,9 +100,9 @@
> > #define PTE_HYP PTE_USER
> >
> > /*
> > - * 40-bit physical address supported.
> > + * Highest possible physical address supported.
> > */
> > -#define PHYS_MASK_SHIFT (40)
> > +#define PHYS_MASK_SHIFT (48)
> > #define PHYS_MASK ((UL(1) << PHYS_MASK_SHIFT) - 1)
> >
> > /*
> > @@ -122,7 +122,6 @@
> > #define TCR_SHARED ((UL(3) << 12) | (UL(3) << 28))
> > #define TCR_TG0_64K (UL(1) << 14)
> > #define TCR_TG1_64K (UL(1) << 30)
> > -#define TCR_IPS_40BIT (UL(2) << 32)
> > #define TCR_ASID16 (UL(1) << 36)
> > #define TCR_TBI0 (UL(1) << 37)
> >
> > diff --git a/arch/arm64/kvm/hyp-init.S b/arch/arm64/kvm/hyp-init.S
> > index 2b0244d..d968796 100644
> > --- a/arch/arm64/kvm/hyp-init.S
> > +++ b/arch/arm64/kvm/hyp-init.S
> > @@ -68,6 +68,12 @@ __do_hyp_init:
> > msr tcr_el2, x4
> >
> > ldr x4, =VTCR_EL2_FLAGS
> > + /*
> > + * Read the PARange bits from ID_AA64MMFR0_EL1 and set the PS bits in
> > + * VTCR_EL2.
> > + */
> > + mrs x5, ID_AA64MMFR0_EL1
> > + bfi x4, x5, #16, #3
> > msr vtcr_el2, x4
> >
> > mrs x4, mair_el1
> > diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
> > index e0ef63c..e085ee6 100644
> > --- a/arch/arm64/mm/proc.S
> > +++ b/arch/arm64/mm/proc.S
> > @@ -209,8 +209,14 @@ ENTRY(__cpu_setup)
> > * Set/prepare TCR and TTBR. We use 512GB (39-bit) address range for
> > * both user and kernel.
> > */
> > - ldr x10, =TCR_TxSZ(VA_BITS) | TCR_FLAGS | TCR_IPS_40BIT | \
> > + ldr x10, =TCR_TxSZ(VA_BITS) | TCR_FLAGS | \
> > TCR_ASID16 | TCR_TBI0 | (1 << 31)
> > + /*
> > + * Read the PARange bits from ID_AA64MMFR0_EL1 and set the IPS bits in
> > + * TCR_EL1.
> > + */
> > + mrs x9, ID_AA64MMFR0_EL1
> > + bfi x10, x9, #32, #3
> > #ifdef CONFIG_ARM64_64K_PAGES
> > orr x10, x10, TCR_TG0_64K
> > orr x10, x10, TCR_TG1_64K
> > --
> > 1.7.1
next prev parent reply other threads:[~2014-03-12 16:54 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-07 8:49 [RFC PATCH v2 0/1] arm64: Boot time configuration of Intermediate Physical Address size mohun106 at gmail.com
2014-03-07 8:49 ` [RFC PATCH v2 1/1] arm64: Add boot " mohun106 at gmail.com
2014-03-11 10:11 ` Radha Mohan
2014-03-12 16:54 ` Catalin Marinas [this message]
2014-03-12 17:17 ` Marc Zyngier
2014-03-12 17:21 ` Catalin Marinas
2014-03-12 16:09 ` Will Deacon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140312165411.GO17083@arm.com \
--to=catalin.marinas@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.