* [PATCH v6 0/3] perf: AARCH64 arch support @ 2014-02-03 18:18 ` Jean Pihet 0 siblings, 0 replies; 24+ messages in thread From: Jean Pihet @ 2014-02-03 18:18 UTC (permalink / raw) To: linux-arm-kernel Add AARCH64 specific support. This includes the following: - AARCH64 perf registers definition and hooks, - compat mode registers use, i.e. profiling a 32-bit binary on a 64-bit system, - unwinding using the dwarf information from the .debug_frame section of the ELF binary, - unwinding using the frame pointer information; in 64-bit and compat modes. Notes: - the tools/perf change is submitted separately on LKML, - support for unwinding using the dwarf information in compat mode requires some changes to the libunwind code. Those changes have been submitted on the libunwind ML and are in discussion. Tested on ARMv7, ARMv8 and x86_64 platforms. The compat mode has been tested on ARMv8 using statically built 32-bit binaries. Jean Pihet (3): ARM64: perf: add support for perf registers API ARM64: perf: add support for frame pointer unwinding in compat mode ARM64: perf: support dwarf unwinding in compat mode arch/arm64/Kconfig | 2 + arch/arm64/include/asm/compat.h | 2 +- arch/arm64/include/asm/ptrace.h | 3 +- arch/arm64/include/uapi/asm/Kbuild | 1 + arch/arm64/include/uapi/asm/perf_regs.h | 40 ++++++++++++++++++ arch/arm64/kernel/Makefile | 1 + arch/arm64/kernel/perf_event.c | 75 +++++++++++++++++++++++++++++---- arch/arm64/kernel/perf_regs.c | 44 +++++++++++++++++++ 8 files changed, 158 insertions(+), 10 deletions(-) create mode 100644 arch/arm64/include/uapi/asm/perf_regs.h create mode 100644 arch/arm64/kernel/perf_regs.c -- 1.7.11.7 ^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v6 0/3] perf: AARCH64 arch support @ 2014-02-03 18:18 ` Jean Pihet 0 siblings, 0 replies; 24+ messages in thread From: Jean Pihet @ 2014-02-03 18:18 UTC (permalink / raw) To: linux-kernel, linaro-kernel, linux-arm-kernel, Will Deacon Cc: Arnaldo, Ingo Molnar, Jiri Olsa, patches, Jean Pihet Add AARCH64 specific support. This includes the following: - AARCH64 perf registers definition and hooks, - compat mode registers use, i.e. profiling a 32-bit binary on a 64-bit system, - unwinding using the dwarf information from the .debug_frame section of the ELF binary, - unwinding using the frame pointer information; in 64-bit and compat modes. Notes: - the tools/perf change is submitted separately on LKML, - support for unwinding using the dwarf information in compat mode requires some changes to the libunwind code. Those changes have been submitted on the libunwind ML and are in discussion. Tested on ARMv7, ARMv8 and x86_64 platforms. The compat mode has been tested on ARMv8 using statically built 32-bit binaries. Jean Pihet (3): ARM64: perf: add support for perf registers API ARM64: perf: add support for frame pointer unwinding in compat mode ARM64: perf: support dwarf unwinding in compat mode arch/arm64/Kconfig | 2 + arch/arm64/include/asm/compat.h | 2 +- arch/arm64/include/asm/ptrace.h | 3 +- arch/arm64/include/uapi/asm/Kbuild | 1 + arch/arm64/include/uapi/asm/perf_regs.h | 40 ++++++++++++++++++ arch/arm64/kernel/Makefile | 1 + arch/arm64/kernel/perf_event.c | 75 +++++++++++++++++++++++++++++---- arch/arm64/kernel/perf_regs.c | 44 +++++++++++++++++++ 8 files changed, 158 insertions(+), 10 deletions(-) create mode 100644 arch/arm64/include/uapi/asm/perf_regs.h create mode 100644 arch/arm64/kernel/perf_regs.c -- 1.7.11.7 ^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH 1/3] ARM64: perf: add support for perf registers API 2014-02-03 18:18 ` Jean Pihet @ 2014-02-03 18:18 ` Jean Pihet -1 siblings, 0 replies; 24+ messages in thread From: Jean Pihet @ 2014-02-03 18:18 UTC (permalink / raw) To: linux-arm-kernel This patch implements the functions required for the perf registers API, allowing the perf tool to interface kernel register dumps with libunwind in order to provide userspace backtracing. Compat mode is also supported. Only the general purpose user space registers are exported, i.e.: PERF_REG_ARM_X0, ... PERF_REG_ARM_X28, PERF_REG_ARM_FP, PERF_REG_ARM_LR, PERF_REG_ARM_SP, PERF_REG_ARM_PC and not the PERF_REG_ARM_V* registers. Signed-off-by: Jean Pihet <jean.pihet@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> --- arch/arm64/Kconfig | 2 ++ arch/arm64/include/asm/ptrace.h | 1 + arch/arm64/include/uapi/asm/Kbuild | 1 + arch/arm64/include/uapi/asm/perf_regs.h | 40 ++++++++++++++++++++++++++++++ arch/arm64/kernel/Makefile | 1 + arch/arm64/kernel/perf_regs.c | 44 +++++++++++++++++++++++++++++++++ 6 files changed, 89 insertions(+) create mode 100644 arch/arm64/include/uapi/asm/perf_regs.h create mode 100644 arch/arm64/kernel/perf_regs.c diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index dd4327f..e9899bb 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -37,6 +37,8 @@ config ARM64 select HAVE_HW_BREAKPOINT if PERF_EVENTS select HAVE_MEMBLOCK select HAVE_PERF_EVENTS + select HAVE_PERF_REGS + select HAVE_PERF_USER_STACK_DUMP select IRQ_DOMAIN select MODULES_USE_ELF_RELA select NO_BOOTMEM diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h index 0e7fa49..fbb0020 100644 --- a/arch/arm64/include/asm/ptrace.h +++ b/arch/arm64/include/asm/ptrace.h @@ -68,6 +68,7 @@ /* Architecturally defined mapping between AArch32 and AArch64 registers */ #define compat_usr(x) regs[(x)] +#define compat_fp regs[11] #define compat_sp regs[13] #define compat_lr regs[14] #define compat_sp_hyp regs[15] diff --git a/arch/arm64/include/uapi/asm/Kbuild b/arch/arm64/include/uapi/asm/Kbuild index e4b78bd..942376d 100644 --- a/arch/arm64/include/uapi/asm/Kbuild +++ b/arch/arm64/include/uapi/asm/Kbuild @@ -9,6 +9,7 @@ header-y += byteorder.h header-y += fcntl.h header-y += hwcap.h header-y += kvm_para.h +header-y += perf_regs.h header-y += param.h header-y += ptrace.h header-y += setup.h diff --git a/arch/arm64/include/uapi/asm/perf_regs.h b/arch/arm64/include/uapi/asm/perf_regs.h new file mode 100644 index 0000000..172b831 --- /dev/null +++ b/arch/arm64/include/uapi/asm/perf_regs.h @@ -0,0 +1,40 @@ +#ifndef _ASM_ARM64_PERF_REGS_H +#define _ASM_ARM64_PERF_REGS_H + +enum perf_event_arm_regs { + PERF_REG_ARM64_X0, + PERF_REG_ARM64_X1, + PERF_REG_ARM64_X2, + PERF_REG_ARM64_X3, + PERF_REG_ARM64_X4, + PERF_REG_ARM64_X5, + PERF_REG_ARM64_X6, + PERF_REG_ARM64_X7, + PERF_REG_ARM64_X8, + PERF_REG_ARM64_X9, + PERF_REG_ARM64_X10, + PERF_REG_ARM64_X11, + PERF_REG_ARM64_X12, + PERF_REG_ARM64_X13, + PERF_REG_ARM64_X14, + PERF_REG_ARM64_X15, + PERF_REG_ARM64_X16, + PERF_REG_ARM64_X17, + PERF_REG_ARM64_X18, + PERF_REG_ARM64_X19, + PERF_REG_ARM64_X20, + PERF_REG_ARM64_X21, + PERF_REG_ARM64_X22, + PERF_REG_ARM64_X23, + PERF_REG_ARM64_X24, + PERF_REG_ARM64_X25, + PERF_REG_ARM64_X26, + PERF_REG_ARM64_X27, + PERF_REG_ARM64_X28, + PERF_REG_ARM64_X29, + PERF_REG_ARM64_LR, + PERF_REG_ARM64_SP, + PERF_REG_ARM64_PC, + PERF_REG_ARM64_MAX, +}; +#endif /* _ASM_ARM64_PERF_REGS_H */ diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile index 2d4554b..9a5d592 100644 --- a/arch/arm64/kernel/Makefile +++ b/arch/arm64/kernel/Makefile @@ -15,6 +15,7 @@ arm64-obj-$(CONFIG_COMPAT) += sys32.o kuser32.o signal32.o \ sys_compat.o arm64-obj-$(CONFIG_MODULES) += arm64ksyms.o module.o arm64-obj-$(CONFIG_SMP) += smp.o smp_spin_table.o +arm64-obj-$(CONFIG_PERF_EVENTS) += perf_regs.o arm64-obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o arm64-obj-$(CONFIG_HAVE_HW_BREAKPOINT)+= hw_breakpoint.o arm64-obj-$(CONFIG_EARLY_PRINTK) += early_printk.o diff --git a/arch/arm64/kernel/perf_regs.c b/arch/arm64/kernel/perf_regs.c new file mode 100644 index 0000000..f2d6f0a --- /dev/null +++ b/arch/arm64/kernel/perf_regs.c @@ -0,0 +1,44 @@ +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/perf_event.h> +#include <linux/bug.h> +#include <asm/perf_regs.h> +#include <asm/ptrace.h> + +u64 perf_reg_value(struct pt_regs *regs, int idx) +{ + if (WARN_ON_ONCE((u32)idx >= PERF_REG_ARM64_MAX)) + return 0; + + /* + * Compat (i.e. 32 bit) mode: + * - PC has been set in the pt_regs struct in kernel_entry, + * - Handle SP and LR here. + */ + if (compat_user_mode(regs)) { + if ((u32)idx == PERF_REG_ARM64_SP) + return regs->compat_sp; + if ((u32)idx == PERF_REG_ARM64_LR) + return regs->compat_lr; + } + + return regs->regs[idx]; +} + +#define REG_RESERVED (~((1ULL << PERF_REG_ARM64_MAX) - 1)) + +int perf_reg_validate(u64 mask) +{ + if (!mask || mask & REG_RESERVED) + return -EINVAL; + + return 0; +} + +u64 perf_reg_abi(struct task_struct *task) +{ + if (is_compat_thread(task_thread_info(task))) + return PERF_SAMPLE_REGS_ABI_32; + else + return PERF_SAMPLE_REGS_ABI_64; +} -- 1.7.11.7 ^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 1/3] ARM64: perf: add support for perf registers API @ 2014-02-03 18:18 ` Jean Pihet 0 siblings, 0 replies; 24+ messages in thread From: Jean Pihet @ 2014-02-03 18:18 UTC (permalink / raw) To: linux-kernel, linaro-kernel, linux-arm-kernel, Will Deacon Cc: Arnaldo, Ingo Molnar, Jiri Olsa, patches, Jean Pihet This patch implements the functions required for the perf registers API, allowing the perf tool to interface kernel register dumps with libunwind in order to provide userspace backtracing. Compat mode is also supported. Only the general purpose user space registers are exported, i.e.: PERF_REG_ARM_X0, ... PERF_REG_ARM_X28, PERF_REG_ARM_FP, PERF_REG_ARM_LR, PERF_REG_ARM_SP, PERF_REG_ARM_PC and not the PERF_REG_ARM_V* registers. Signed-off-by: Jean Pihet <jean.pihet@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> --- arch/arm64/Kconfig | 2 ++ arch/arm64/include/asm/ptrace.h | 1 + arch/arm64/include/uapi/asm/Kbuild | 1 + arch/arm64/include/uapi/asm/perf_regs.h | 40 ++++++++++++++++++++++++++++++ arch/arm64/kernel/Makefile | 1 + arch/arm64/kernel/perf_regs.c | 44 +++++++++++++++++++++++++++++++++ 6 files changed, 89 insertions(+) create mode 100644 arch/arm64/include/uapi/asm/perf_regs.h create mode 100644 arch/arm64/kernel/perf_regs.c diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index dd4327f..e9899bb 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -37,6 +37,8 @@ config ARM64 select HAVE_HW_BREAKPOINT if PERF_EVENTS select HAVE_MEMBLOCK select HAVE_PERF_EVENTS + select HAVE_PERF_REGS + select HAVE_PERF_USER_STACK_DUMP select IRQ_DOMAIN select MODULES_USE_ELF_RELA select NO_BOOTMEM diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h index 0e7fa49..fbb0020 100644 --- a/arch/arm64/include/asm/ptrace.h +++ b/arch/arm64/include/asm/ptrace.h @@ -68,6 +68,7 @@ /* Architecturally defined mapping between AArch32 and AArch64 registers */ #define compat_usr(x) regs[(x)] +#define compat_fp regs[11] #define compat_sp regs[13] #define compat_lr regs[14] #define compat_sp_hyp regs[15] diff --git a/arch/arm64/include/uapi/asm/Kbuild b/arch/arm64/include/uapi/asm/Kbuild index e4b78bd..942376d 100644 --- a/arch/arm64/include/uapi/asm/Kbuild +++ b/arch/arm64/include/uapi/asm/Kbuild @@ -9,6 +9,7 @@ header-y += byteorder.h header-y += fcntl.h header-y += hwcap.h header-y += kvm_para.h +header-y += perf_regs.h header-y += param.h header-y += ptrace.h header-y += setup.h diff --git a/arch/arm64/include/uapi/asm/perf_regs.h b/arch/arm64/include/uapi/asm/perf_regs.h new file mode 100644 index 0000000..172b831 --- /dev/null +++ b/arch/arm64/include/uapi/asm/perf_regs.h @@ -0,0 +1,40 @@ +#ifndef _ASM_ARM64_PERF_REGS_H +#define _ASM_ARM64_PERF_REGS_H + +enum perf_event_arm_regs { + PERF_REG_ARM64_X0, + PERF_REG_ARM64_X1, + PERF_REG_ARM64_X2, + PERF_REG_ARM64_X3, + PERF_REG_ARM64_X4, + PERF_REG_ARM64_X5, + PERF_REG_ARM64_X6, + PERF_REG_ARM64_X7, + PERF_REG_ARM64_X8, + PERF_REG_ARM64_X9, + PERF_REG_ARM64_X10, + PERF_REG_ARM64_X11, + PERF_REG_ARM64_X12, + PERF_REG_ARM64_X13, + PERF_REG_ARM64_X14, + PERF_REG_ARM64_X15, + PERF_REG_ARM64_X16, + PERF_REG_ARM64_X17, + PERF_REG_ARM64_X18, + PERF_REG_ARM64_X19, + PERF_REG_ARM64_X20, + PERF_REG_ARM64_X21, + PERF_REG_ARM64_X22, + PERF_REG_ARM64_X23, + PERF_REG_ARM64_X24, + PERF_REG_ARM64_X25, + PERF_REG_ARM64_X26, + PERF_REG_ARM64_X27, + PERF_REG_ARM64_X28, + PERF_REG_ARM64_X29, + PERF_REG_ARM64_LR, + PERF_REG_ARM64_SP, + PERF_REG_ARM64_PC, + PERF_REG_ARM64_MAX, +}; +#endif /* _ASM_ARM64_PERF_REGS_H */ diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile index 2d4554b..9a5d592 100644 --- a/arch/arm64/kernel/Makefile +++ b/arch/arm64/kernel/Makefile @@ -15,6 +15,7 @@ arm64-obj-$(CONFIG_COMPAT) += sys32.o kuser32.o signal32.o \ sys_compat.o arm64-obj-$(CONFIG_MODULES) += arm64ksyms.o module.o arm64-obj-$(CONFIG_SMP) += smp.o smp_spin_table.o +arm64-obj-$(CONFIG_PERF_EVENTS) += perf_regs.o arm64-obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o arm64-obj-$(CONFIG_HAVE_HW_BREAKPOINT)+= hw_breakpoint.o arm64-obj-$(CONFIG_EARLY_PRINTK) += early_printk.o diff --git a/arch/arm64/kernel/perf_regs.c b/arch/arm64/kernel/perf_regs.c new file mode 100644 index 0000000..f2d6f0a --- /dev/null +++ b/arch/arm64/kernel/perf_regs.c @@ -0,0 +1,44 @@ +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/perf_event.h> +#include <linux/bug.h> +#include <asm/perf_regs.h> +#include <asm/ptrace.h> + +u64 perf_reg_value(struct pt_regs *regs, int idx) +{ + if (WARN_ON_ONCE((u32)idx >= PERF_REG_ARM64_MAX)) + return 0; + + /* + * Compat (i.e. 32 bit) mode: + * - PC has been set in the pt_regs struct in kernel_entry, + * - Handle SP and LR here. + */ + if (compat_user_mode(regs)) { + if ((u32)idx == PERF_REG_ARM64_SP) + return regs->compat_sp; + if ((u32)idx == PERF_REG_ARM64_LR) + return regs->compat_lr; + } + + return regs->regs[idx]; +} + +#define REG_RESERVED (~((1ULL << PERF_REG_ARM64_MAX) - 1)) + +int perf_reg_validate(u64 mask) +{ + if (!mask || mask & REG_RESERVED) + return -EINVAL; + + return 0; +} + +u64 perf_reg_abi(struct task_struct *task) +{ + if (is_compat_thread(task_thread_info(task))) + return PERF_SAMPLE_REGS_ABI_32; + else + return PERF_SAMPLE_REGS_ABI_64; +} -- 1.7.11.7 ^ permalink raw reply related [flat|nested] 24+ messages in thread
* [tip:perf/core] ARM64, perf: Add support for perf registers API 2014-02-03 18:18 ` Jean Pihet (?) @ 2014-03-13 7:27 ` tip-bot for Jean Pihet 2014-03-13 10:19 ` Catalin Marinas -1 siblings, 1 reply; 24+ messages in thread From: tip-bot for Jean Pihet @ 2014-03-13 7:27 UTC (permalink / raw) To: linux-tip-commits Cc: linux-kernel, hpa, mingo, will.deacon, acme, jean.pihet, jolsa, tglx Commit-ID: 1acfb01a43db9d8cde2d4c1d51746bae0b46b06b Gitweb: http://git.kernel.org/tip/1acfb01a43db9d8cde2d4c1d51746bae0b46b06b Author: Jean Pihet <jean.pihet@linaro.org> AuthorDate: Mon, 3 Feb 2014 19:18:27 +0100 Committer: Ingo Molnar <mingo@kernel.org> CommitDate: Wed, 12 Mar 2014 13:45:28 +0100 ARM64, perf: Add support for perf registers API This patch implements the functions required for the perf registers API, allowing the perf tool to interface kernel register dumps with libunwind in order to provide userspace backtracing. Compat mode is also supported. Only the general purpose user space registers are exported, i.e.: PERF_REG_ARM_X0, ... PERF_REG_ARM_X28, PERF_REG_ARM_FP, PERF_REG_ARM_LR, PERF_REG_ARM_SP, PERF_REG_ARM_PC and not the PERF_REG_ARM_V* registers. Signed-off-by: Jean Pihet <jean.pihet@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Arnaldo <acme@ghostprotocols.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: patches@linaro.org Cc: linaro-kernel@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1391451509-31265-2-git-send-email-jean.pihet@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> --- arch/arm64/Kconfig | 2 ++ arch/arm64/include/asm/ptrace.h | 1 + arch/arm64/include/uapi/asm/Kbuild | 1 + arch/arm64/include/uapi/asm/perf_regs.h | 40 ++++++++++++++++++++++++++++++ arch/arm64/kernel/Makefile | 1 + arch/arm64/kernel/perf_regs.c | 44 +++++++++++++++++++++++++++++++++ 6 files changed, 89 insertions(+) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 27bbcfc..c8bac62 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -38,6 +38,8 @@ config ARM64 select HAVE_MEMBLOCK select HAVE_PATA_PLATFORM select HAVE_PERF_EVENTS + select HAVE_PERF_REGS + select HAVE_PERF_USER_STACK_DUMP select IRQ_DOMAIN select MODULES_USE_ELF_RELA select NO_BOOTMEM diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h index 0e7fa49..fbb0020 100644 --- a/arch/arm64/include/asm/ptrace.h +++ b/arch/arm64/include/asm/ptrace.h @@ -68,6 +68,7 @@ /* Architecturally defined mapping between AArch32 and AArch64 registers */ #define compat_usr(x) regs[(x)] +#define compat_fp regs[11] #define compat_sp regs[13] #define compat_lr regs[14] #define compat_sp_hyp regs[15] diff --git a/arch/arm64/include/uapi/asm/Kbuild b/arch/arm64/include/uapi/asm/Kbuild index e4b78bd..942376d 100644 --- a/arch/arm64/include/uapi/asm/Kbuild +++ b/arch/arm64/include/uapi/asm/Kbuild @@ -9,6 +9,7 @@ header-y += byteorder.h header-y += fcntl.h header-y += hwcap.h header-y += kvm_para.h +header-y += perf_regs.h header-y += param.h header-y += ptrace.h header-y += setup.h diff --git a/arch/arm64/include/uapi/asm/perf_regs.h b/arch/arm64/include/uapi/asm/perf_regs.h new file mode 100644 index 0000000..172b831 --- /dev/null +++ b/arch/arm64/include/uapi/asm/perf_regs.h @@ -0,0 +1,40 @@ +#ifndef _ASM_ARM64_PERF_REGS_H +#define _ASM_ARM64_PERF_REGS_H + +enum perf_event_arm_regs { + PERF_REG_ARM64_X0, + PERF_REG_ARM64_X1, + PERF_REG_ARM64_X2, + PERF_REG_ARM64_X3, + PERF_REG_ARM64_X4, + PERF_REG_ARM64_X5, + PERF_REG_ARM64_X6, + PERF_REG_ARM64_X7, + PERF_REG_ARM64_X8, + PERF_REG_ARM64_X9, + PERF_REG_ARM64_X10, + PERF_REG_ARM64_X11, + PERF_REG_ARM64_X12, + PERF_REG_ARM64_X13, + PERF_REG_ARM64_X14, + PERF_REG_ARM64_X15, + PERF_REG_ARM64_X16, + PERF_REG_ARM64_X17, + PERF_REG_ARM64_X18, + PERF_REG_ARM64_X19, + PERF_REG_ARM64_X20, + PERF_REG_ARM64_X21, + PERF_REG_ARM64_X22, + PERF_REG_ARM64_X23, + PERF_REG_ARM64_X24, + PERF_REG_ARM64_X25, + PERF_REG_ARM64_X26, + PERF_REG_ARM64_X27, + PERF_REG_ARM64_X28, + PERF_REG_ARM64_X29, + PERF_REG_ARM64_LR, + PERF_REG_ARM64_SP, + PERF_REG_ARM64_PC, + PERF_REG_ARM64_MAX, +}; +#endif /* _ASM_ARM64_PERF_REGS_H */ diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile index 2d4554b..9a5d592 100644 --- a/arch/arm64/kernel/Makefile +++ b/arch/arm64/kernel/Makefile @@ -15,6 +15,7 @@ arm64-obj-$(CONFIG_COMPAT) += sys32.o kuser32.o signal32.o \ sys_compat.o arm64-obj-$(CONFIG_MODULES) += arm64ksyms.o module.o arm64-obj-$(CONFIG_SMP) += smp.o smp_spin_table.o +arm64-obj-$(CONFIG_PERF_EVENTS) += perf_regs.o arm64-obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o arm64-obj-$(CONFIG_HAVE_HW_BREAKPOINT)+= hw_breakpoint.o arm64-obj-$(CONFIG_EARLY_PRINTK) += early_printk.o diff --git a/arch/arm64/kernel/perf_regs.c b/arch/arm64/kernel/perf_regs.c new file mode 100644 index 0000000..f2d6f0a --- /dev/null +++ b/arch/arm64/kernel/perf_regs.c @@ -0,0 +1,44 @@ +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/perf_event.h> +#include <linux/bug.h> +#include <asm/perf_regs.h> +#include <asm/ptrace.h> + +u64 perf_reg_value(struct pt_regs *regs, int idx) +{ + if (WARN_ON_ONCE((u32)idx >= PERF_REG_ARM64_MAX)) + return 0; + + /* + * Compat (i.e. 32 bit) mode: + * - PC has been set in the pt_regs struct in kernel_entry, + * - Handle SP and LR here. + */ + if (compat_user_mode(regs)) { + if ((u32)idx == PERF_REG_ARM64_SP) + return regs->compat_sp; + if ((u32)idx == PERF_REG_ARM64_LR) + return regs->compat_lr; + } + + return regs->regs[idx]; +} + +#define REG_RESERVED (~((1ULL << PERF_REG_ARM64_MAX) - 1)) + +int perf_reg_validate(u64 mask) +{ + if (!mask || mask & REG_RESERVED) + return -EINVAL; + + return 0; +} + +u64 perf_reg_abi(struct task_struct *task) +{ + if (is_compat_thread(task_thread_info(task))) + return PERF_SAMPLE_REGS_ABI_32; + else + return PERF_SAMPLE_REGS_ABI_64; +} ^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: [tip:perf/core] ARM64, perf: Add support for perf registers API 2014-03-13 7:27 ` [tip:perf/core] ARM64, perf: Add " tip-bot for Jean Pihet @ 2014-03-13 10:19 ` Catalin Marinas 2014-03-13 11:01 ` Ingo Molnar 0 siblings, 1 reply; 24+ messages in thread From: Catalin Marinas @ 2014-03-13 10:19 UTC (permalink / raw) To: mingo, hpa, linux-kernel, will.deacon, acme, jean.pihet, jolsa, tglx Cc: linux-tip-commits Hi Ingo, On Thu, Mar 13, 2014 at 12:27:45AM -0700, tip-bot for Jean Pihet wrote: > Commit-ID: 1acfb01a43db9d8cde2d4c1d51746bae0b46b06b > Gitweb: http://git.kernel.org/tip/1acfb01a43db9d8cde2d4c1d51746bae0b46b06b > Author: Jean Pihet <jean.pihet@linaro.org> > AuthorDate: Mon, 3 Feb 2014 19:18:27 +0100 > Committer: Ingo Molnar <mingo@kernel.org> > CommitDate: Wed, 12 Mar 2014 13:45:28 +0100 > > ARM64, perf: Add support for perf registers API > > This patch implements the functions required for the perf > registers API, allowing the perf tool to interface kernel > register dumps with libunwind in order to provide userspace > backtracing. Compat mode is also supported. > > Only the general purpose user space registers are exported, > i.e.: PERF_REG_ARM_X0, > ... > PERF_REG_ARM_X28, > PERF_REG_ARM_FP, > PERF_REG_ARM_LR, > PERF_REG_ARM_SP, > PERF_REG_ARM_PC > and not the PERF_REG_ARM_V* registers. > > Signed-off-by: Jean Pihet <jean.pihet@linaro.org> > Acked-by: Will Deacon <will.deacon@arm.com> > Cc: Arnaldo <acme@ghostprotocols.net> > Cc: Jiri Olsa <jolsa@redhat.com> > Cc: patches@linaro.org > Cc: linaro-kernel@lists.linaro.org > Cc: linux-arm-kernel@lists.infradead.org > Link: http://lkml.kernel.org/r/1391451509-31265-2-git-send-email-jean.pihet@linaro.org > Signed-off-by: Ingo Molnar <mingo@kernel.org> > --- > arch/arm64/Kconfig | 2 ++ > arch/arm64/include/asm/ptrace.h | 1 + > arch/arm64/include/uapi/asm/Kbuild | 1 + > arch/arm64/include/uapi/asm/perf_regs.h | 40 ++++++++++++++++++++++++++++++ > arch/arm64/kernel/Makefile | 1 + > arch/arm64/kernel/perf_regs.c | 44 +++++++++++++++++++++++++++++++++ > 6 files changed, 89 insertions(+) As I replied to Jean yesterday, I merged the arch/arm64 patches already in the arm64 tree. Is it late to drop them from tip (and avoid potential conflicts)? But please take the perf tools patch (tools/perf/arch/arm64/...). Thanks. -- Catalin ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [tip:perf/core] ARM64, perf: Add support for perf registers API 2014-03-13 10:19 ` Catalin Marinas @ 2014-03-13 11:01 ` Ingo Molnar 2014-03-13 11:35 ` Catalin Marinas 0 siblings, 1 reply; 24+ messages in thread From: Ingo Molnar @ 2014-03-13 11:01 UTC (permalink / raw) To: Catalin Marinas Cc: hpa, linux-kernel, will.deacon, acme, jean.pihet, jolsa, tglx, linux-tip-commits * Catalin Marinas <catalin.marinas@arm.com> wrote: > Hi Ingo, > > On Thu, Mar 13, 2014 at 12:27:45AM -0700, tip-bot for Jean Pihet wrote: > > Commit-ID: 1acfb01a43db9d8cde2d4c1d51746bae0b46b06b > > Gitweb: http://git.kernel.org/tip/1acfb01a43db9d8cde2d4c1d51746bae0b46b06b > > Author: Jean Pihet <jean.pihet@linaro.org> > > AuthorDate: Mon, 3 Feb 2014 19:18:27 +0100 > > Committer: Ingo Molnar <mingo@kernel.org> > > CommitDate: Wed, 12 Mar 2014 13:45:28 +0100 > > > > ARM64, perf: Add support for perf registers API > > > > This patch implements the functions required for the perf > > registers API, allowing the perf tool to interface kernel > > register dumps with libunwind in order to provide userspace > > backtracing. Compat mode is also supported. > > > > Only the general purpose user space registers are exported, > > i.e.: PERF_REG_ARM_X0, > > ... > > PERF_REG_ARM_X28, > > PERF_REG_ARM_FP, > > PERF_REG_ARM_LR, > > PERF_REG_ARM_SP, > > PERF_REG_ARM_PC > > and not the PERF_REG_ARM_V* registers. > > > > Signed-off-by: Jean Pihet <jean.pihet@linaro.org> > > Acked-by: Will Deacon <will.deacon@arm.com> > > Cc: Arnaldo <acme@ghostprotocols.net> > > Cc: Jiri Olsa <jolsa@redhat.com> > > Cc: patches@linaro.org > > Cc: linaro-kernel@lists.linaro.org > > Cc: linux-arm-kernel@lists.infradead.org > > Link: http://lkml.kernel.org/r/1391451509-31265-2-git-send-email-jean.pihet@linaro.org > > Signed-off-by: Ingo Molnar <mingo@kernel.org> > > --- > > arch/arm64/Kconfig | 2 ++ > > arch/arm64/include/asm/ptrace.h | 1 + > > arch/arm64/include/uapi/asm/Kbuild | 1 + > > arch/arm64/include/uapi/asm/perf_regs.h | 40 ++++++++++++++++++++++++++++++ > > arch/arm64/kernel/Makefile | 1 + > > arch/arm64/kernel/perf_regs.c | 44 +++++++++++++++++++++++++++++++++ > > 6 files changed, 89 insertions(+) > > As I replied to Jean yesterday, I merged the arch/arm64 patches already > in the arm64 tree. Is it late to drop them from tip (and avoid potential > conflicts)? > > But please take the perf tools patch (tools/perf/arch/arm64/...). Well, I merged them so that the tooling bits can be tested on top of that and merged as well. Anyway, I dropped them, they were still the tail of tip:perf/core. Thanks, Ingo ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [tip:perf/core] ARM64, perf: Add support for perf registers API 2014-03-13 11:01 ` Ingo Molnar @ 2014-03-13 11:35 ` Catalin Marinas 0 siblings, 0 replies; 24+ messages in thread From: Catalin Marinas @ 2014-03-13 11:35 UTC (permalink / raw) To: Ingo Molnar Cc: hpa@zytor.com, linux-kernel@vger.kernel.org, Will Deacon, acme@ghostprotocols.net, jean.pihet@linaro.org, jolsa@redhat.com, tglx@linutronix.de, linux-tip-commits@vger.kernel.org On Thu, Mar 13, 2014 at 11:01:21AM +0000, Ingo Molnar wrote: > * Catalin Marinas <catalin.marinas@arm.com> wrote: > > On Thu, Mar 13, 2014 at 12:27:45AM -0700, tip-bot for Jean Pihet wrote: > > > Commit-ID: 1acfb01a43db9d8cde2d4c1d51746bae0b46b06b > > > Gitweb: http://git.kernel.org/tip/1acfb01a43db9d8cde2d4c1d51746bae0b46b06b > > > Author: Jean Pihet <jean.pihet@linaro.org> > > > AuthorDate: Mon, 3 Feb 2014 19:18:27 +0100 > > > Committer: Ingo Molnar <mingo@kernel.org> > > > CommitDate: Wed, 12 Mar 2014 13:45:28 +0100 > > > > > > ARM64, perf: Add support for perf registers API > > > > > > This patch implements the functions required for the perf > > > registers API, allowing the perf tool to interface kernel > > > register dumps with libunwind in order to provide userspace > > > backtracing. Compat mode is also supported. > > > > > > Only the general purpose user space registers are exported, > > > i.e.: PERF_REG_ARM_X0, > > > ... > > > PERF_REG_ARM_X28, > > > PERF_REG_ARM_FP, > > > PERF_REG_ARM_LR, > > > PERF_REG_ARM_SP, > > > PERF_REG_ARM_PC > > > and not the PERF_REG_ARM_V* registers. > > > > > > Signed-off-by: Jean Pihet <jean.pihet@linaro.org> > > > Acked-by: Will Deacon <will.deacon@arm.com> > > > Cc: Arnaldo <acme@ghostprotocols.net> > > > Cc: Jiri Olsa <jolsa@redhat.com> > > > Cc: patches@linaro.org > > > Cc: linaro-kernel@lists.linaro.org > > > Cc: linux-arm-kernel@lists.infradead.org > > > Link: http://lkml.kernel.org/r/1391451509-31265-2-git-send-email-jean.pihet@linaro.org > > > Signed-off-by: Ingo Molnar <mingo@kernel.org> > > > --- > > > arch/arm64/Kconfig | 2 ++ > > > arch/arm64/include/asm/ptrace.h | 1 + > > > arch/arm64/include/uapi/asm/Kbuild | 1 + > > > arch/arm64/include/uapi/asm/perf_regs.h | 40 ++++++++++++++++++++++++++++++ > > > arch/arm64/kernel/Makefile | 1 + > > > arch/arm64/kernel/perf_regs.c | 44 +++++++++++++++++++++++++++++++++ > > > 6 files changed, 89 insertions(+) > > > > As I replied to Jean yesterday, I merged the arch/arm64 patches already > > in the arm64 tree. Is it late to drop them from tip (and avoid potential > > conflicts)? > > > > But please take the perf tools patch (tools/perf/arch/arm64/...). > > Well, I merged them so that the tooling bits can be tested on top of > that and merged as well. That's why I asked if I should take the tooling bits but Will objected ;). > Anyway, I dropped them, they were still the tail of tip:perf/core. Thanks. I assume you still take the tooling patch? -- Catalin ^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH 2/3] ARM64: perf: add support for frame pointer unwinding in compat mode 2014-02-03 18:18 ` Jean Pihet @ 2014-02-03 18:18 ` Jean Pihet -1 siblings, 0 replies; 24+ messages in thread From: Jean Pihet @ 2014-02-03 18:18 UTC (permalink / raw) To: linux-arm-kernel When profiling a 32-bit application, user space callchain unwinding using the frame pointer is performed in compat mode. The code is taken over from the AARCH32 code and adapted to work on AARCH64. Signed-off-by: Jean Pihet <jean.pihet@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> --- arch/arm64/kernel/perf_event.c | 75 +++++++++++++++++++++++++++++++++++++----- 1 file changed, 67 insertions(+), 8 deletions(-) diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c index 5b1cd79..e868c72 100644 --- a/arch/arm64/kernel/perf_event.c +++ b/arch/arm64/kernel/perf_event.c @@ -1348,8 +1348,8 @@ early_initcall(init_hw_perf_events); * Callchain handling code. */ struct frame_tail { - struct frame_tail __user *fp; - unsigned long lr; + struct frame_tail __user *fp; + unsigned long lr; } __attribute__((packed)); /* @@ -1386,22 +1386,80 @@ user_backtrace(struct frame_tail __user *tail, return buftail.fp; } +/* + * The registers we're interested in are at the end of the variable + * length saved register structure. The fp points at the end of this + * structure so the address of this struct is: + * (struct compat_frame_tail *)(xxx->fp)-1 + * + * This code has been adapted from the ARM OProfile support. + */ +struct compat_frame_tail { + compat_uptr_t fp; /* a (struct compat_frame_tail *) in compat mode */ + u32 sp; + u32 lr; +} __attribute__((packed)); + +static struct compat_frame_tail __user * +compat_user_backtrace(struct compat_frame_tail __user *tail, + struct perf_callchain_entry *entry) +{ + struct compat_frame_tail buftail; + unsigned long err; + + /* Also check accessibility of one struct frame_tail beyond */ + if (!access_ok(VERIFY_READ, tail, sizeof(buftail))) + return NULL; + + pagefault_disable(); + err = __copy_from_user_inatomic(&buftail, tail, sizeof(buftail)); + pagefault_enable(); + + if (err) + return NULL; + + perf_callchain_store(entry, buftail.lr); + + /* + * Frame pointers should strictly progress back up the stack + * (towards higher addresses). + */ + if (tail + 1 >= (struct compat_frame_tail __user *) + compat_ptr(buftail.fp)) + return NULL; + + return (struct compat_frame_tail __user *)compat_ptr(buftail.fp) - 1; +} + void perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) { - struct frame_tail __user *tail; - if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) { /* We don't support guest os callchain now */ return; } perf_callchain_store(entry, regs->pc); - tail = (struct frame_tail __user *)regs->regs[29]; - while (entry->nr < PERF_MAX_STACK_DEPTH && - tail && !((unsigned long)tail & 0xf)) - tail = user_backtrace(tail, entry); + if (!compat_user_mode(regs)) { + /* AARCH64 mode */ + struct frame_tail __user *tail; + + tail = (struct frame_tail __user *)regs->regs[29]; + + while (entry->nr < PERF_MAX_STACK_DEPTH && + tail && !((unsigned long)tail & 0xf)) + tail = user_backtrace(tail, entry); + } else { + /* AARCH32 compat mode */ + struct compat_frame_tail __user *tail; + + tail = (struct compat_frame_tail __user *)regs->compat_fp - 1; + + while ((entry->nr < PERF_MAX_STACK_DEPTH) && + tail && !((unsigned long)tail & 0x3)) + tail = compat_user_backtrace(tail, entry); + } } /* @@ -1429,6 +1487,7 @@ void perf_callchain_kernel(struct perf_callchain_entry *entry, frame.fp = regs->regs[29]; frame.sp = regs->sp; frame.pc = regs->pc; + walk_stackframe(&frame, callchain_trace, entry); } -- 1.7.11.7 ^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 2/3] ARM64: perf: add support for frame pointer unwinding in compat mode @ 2014-02-03 18:18 ` Jean Pihet 0 siblings, 0 replies; 24+ messages in thread From: Jean Pihet @ 2014-02-03 18:18 UTC (permalink / raw) To: linux-kernel, linaro-kernel, linux-arm-kernel, Will Deacon Cc: Arnaldo, Ingo Molnar, Jiri Olsa, patches, Jean Pihet When profiling a 32-bit application, user space callchain unwinding using the frame pointer is performed in compat mode. The code is taken over from the AARCH32 code and adapted to work on AARCH64. Signed-off-by: Jean Pihet <jean.pihet@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> --- arch/arm64/kernel/perf_event.c | 75 +++++++++++++++++++++++++++++++++++++----- 1 file changed, 67 insertions(+), 8 deletions(-) diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c index 5b1cd79..e868c72 100644 --- a/arch/arm64/kernel/perf_event.c +++ b/arch/arm64/kernel/perf_event.c @@ -1348,8 +1348,8 @@ early_initcall(init_hw_perf_events); * Callchain handling code. */ struct frame_tail { - struct frame_tail __user *fp; - unsigned long lr; + struct frame_tail __user *fp; + unsigned long lr; } __attribute__((packed)); /* @@ -1386,22 +1386,80 @@ user_backtrace(struct frame_tail __user *tail, return buftail.fp; } +/* + * The registers we're interested in are at the end of the variable + * length saved register structure. The fp points at the end of this + * structure so the address of this struct is: + * (struct compat_frame_tail *)(xxx->fp)-1 + * + * This code has been adapted from the ARM OProfile support. + */ +struct compat_frame_tail { + compat_uptr_t fp; /* a (struct compat_frame_tail *) in compat mode */ + u32 sp; + u32 lr; +} __attribute__((packed)); + +static struct compat_frame_tail __user * +compat_user_backtrace(struct compat_frame_tail __user *tail, + struct perf_callchain_entry *entry) +{ + struct compat_frame_tail buftail; + unsigned long err; + + /* Also check accessibility of one struct frame_tail beyond */ + if (!access_ok(VERIFY_READ, tail, sizeof(buftail))) + return NULL; + + pagefault_disable(); + err = __copy_from_user_inatomic(&buftail, tail, sizeof(buftail)); + pagefault_enable(); + + if (err) + return NULL; + + perf_callchain_store(entry, buftail.lr); + + /* + * Frame pointers should strictly progress back up the stack + * (towards higher addresses). + */ + if (tail + 1 >= (struct compat_frame_tail __user *) + compat_ptr(buftail.fp)) + return NULL; + + return (struct compat_frame_tail __user *)compat_ptr(buftail.fp) - 1; +} + void perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) { - struct frame_tail __user *tail; - if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) { /* We don't support guest os callchain now */ return; } perf_callchain_store(entry, regs->pc); - tail = (struct frame_tail __user *)regs->regs[29]; - while (entry->nr < PERF_MAX_STACK_DEPTH && - tail && !((unsigned long)tail & 0xf)) - tail = user_backtrace(tail, entry); + if (!compat_user_mode(regs)) { + /* AARCH64 mode */ + struct frame_tail __user *tail; + + tail = (struct frame_tail __user *)regs->regs[29]; + + while (entry->nr < PERF_MAX_STACK_DEPTH && + tail && !((unsigned long)tail & 0xf)) + tail = user_backtrace(tail, entry); + } else { + /* AARCH32 compat mode */ + struct compat_frame_tail __user *tail; + + tail = (struct compat_frame_tail __user *)regs->compat_fp - 1; + + while ((entry->nr < PERF_MAX_STACK_DEPTH) && + tail && !((unsigned long)tail & 0x3)) + tail = compat_user_backtrace(tail, entry); + } } /* @@ -1429,6 +1487,7 @@ void perf_callchain_kernel(struct perf_callchain_entry *entry, frame.fp = regs->regs[29]; frame.sp = regs->sp; frame.pc = regs->pc; + walk_stackframe(&frame, callchain_trace, entry); } -- 1.7.11.7 ^ permalink raw reply related [flat|nested] 24+ messages in thread
* [tip:perf/core] ARM64, perf: Add support for frame pointer unwinding in compat mode 2014-02-03 18:18 ` Jean Pihet (?) @ 2014-03-13 7:27 ` tip-bot for Jean Pihet -1 siblings, 0 replies; 24+ messages in thread From: tip-bot for Jean Pihet @ 2014-03-13 7:27 UTC (permalink / raw) To: linux-tip-commits Cc: linux-kernel, hpa, mingo, will.deacon, acme, jean.pihet, jolsa, tglx Commit-ID: a0cb501f9de391077eb18e4675e2be95c3dcf84c Gitweb: http://git.kernel.org/tip/a0cb501f9de391077eb18e4675e2be95c3dcf84c Author: Jean Pihet <jean.pihet@linaro.org> AuthorDate: Mon, 3 Feb 2014 19:18:28 +0100 Committer: Ingo Molnar <mingo@kernel.org> CommitDate: Wed, 12 Mar 2014 13:45:29 +0100 ARM64, perf: Add support for frame pointer unwinding in compat mode When profiling a 32-bit application, user space callchain unwinding using the frame pointer is performed in compat mode. The code is taken over from the AARCH32 code and adapted to work on AARCH64. Signed-off-by: Jean Pihet <jean.pihet@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Arnaldo <acme@ghostprotocols.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: patches@linaro.org Cc: linaro-kernel@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1391451509-31265-3-git-send-email-jean.pihet@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> --- arch/arm64/kernel/perf_event.c | 75 +++++++++++++++++++++++++++++++++++++----- 1 file changed, 67 insertions(+), 8 deletions(-) diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c index 5b1cd79..e868c72 100644 --- a/arch/arm64/kernel/perf_event.c +++ b/arch/arm64/kernel/perf_event.c @@ -1348,8 +1348,8 @@ early_initcall(init_hw_perf_events); * Callchain handling code. */ struct frame_tail { - struct frame_tail __user *fp; - unsigned long lr; + struct frame_tail __user *fp; + unsigned long lr; } __attribute__((packed)); /* @@ -1386,22 +1386,80 @@ user_backtrace(struct frame_tail __user *tail, return buftail.fp; } +/* + * The registers we're interested in are at the end of the variable + * length saved register structure. The fp points at the end of this + * structure so the address of this struct is: + * (struct compat_frame_tail *)(xxx->fp)-1 + * + * This code has been adapted from the ARM OProfile support. + */ +struct compat_frame_tail { + compat_uptr_t fp; /* a (struct compat_frame_tail *) in compat mode */ + u32 sp; + u32 lr; +} __attribute__((packed)); + +static struct compat_frame_tail __user * +compat_user_backtrace(struct compat_frame_tail __user *tail, + struct perf_callchain_entry *entry) +{ + struct compat_frame_tail buftail; + unsigned long err; + + /* Also check accessibility of one struct frame_tail beyond */ + if (!access_ok(VERIFY_READ, tail, sizeof(buftail))) + return NULL; + + pagefault_disable(); + err = __copy_from_user_inatomic(&buftail, tail, sizeof(buftail)); + pagefault_enable(); + + if (err) + return NULL; + + perf_callchain_store(entry, buftail.lr); + + /* + * Frame pointers should strictly progress back up the stack + * (towards higher addresses). + */ + if (tail + 1 >= (struct compat_frame_tail __user *) + compat_ptr(buftail.fp)) + return NULL; + + return (struct compat_frame_tail __user *)compat_ptr(buftail.fp) - 1; +} + void perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) { - struct frame_tail __user *tail; - if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) { /* We don't support guest os callchain now */ return; } perf_callchain_store(entry, regs->pc); - tail = (struct frame_tail __user *)regs->regs[29]; - while (entry->nr < PERF_MAX_STACK_DEPTH && - tail && !((unsigned long)tail & 0xf)) - tail = user_backtrace(tail, entry); + if (!compat_user_mode(regs)) { + /* AARCH64 mode */ + struct frame_tail __user *tail; + + tail = (struct frame_tail __user *)regs->regs[29]; + + while (entry->nr < PERF_MAX_STACK_DEPTH && + tail && !((unsigned long)tail & 0xf)) + tail = user_backtrace(tail, entry); + } else { + /* AARCH32 compat mode */ + struct compat_frame_tail __user *tail; + + tail = (struct compat_frame_tail __user *)regs->compat_fp - 1; + + while ((entry->nr < PERF_MAX_STACK_DEPTH) && + tail && !((unsigned long)tail & 0x3)) + tail = compat_user_backtrace(tail, entry); + } } /* @@ -1429,6 +1487,7 @@ void perf_callchain_kernel(struct perf_callchain_entry *entry, frame.fp = regs->regs[29]; frame.sp = regs->sp; frame.pc = regs->pc; + walk_stackframe(&frame, callchain_trace, entry); } ^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 3/3] ARM64: perf: support dwarf unwinding in compat mode 2014-02-03 18:18 ` Jean Pihet @ 2014-02-03 18:18 ` Jean Pihet -1 siblings, 0 replies; 24+ messages in thread From: Jean Pihet @ 2014-02-03 18:18 UTC (permalink / raw) To: linux-arm-kernel Add support for unwinding using the dwarf information in compat mode. Using the correct user stack pointer allows perf to record the frames correctly in the native and compat modes. Note that although the dwarf frame unwinding works ok using libunwind in native mode (on ARMv7 & ARMv8), some changes are required to the libunwind code for the compat mode. Those changes are posted separately on the libunwind mailing list. Tested on ARMv8 platform with v8 and compat v7 binaries, the latter are statically built. Signed-off-by: Jean Pihet <jean.pihet@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> --- arch/arm64/include/asm/compat.h | 2 +- arch/arm64/include/asm/ptrace.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/include/asm/compat.h b/arch/arm64/include/asm/compat.h index fda2704..e71f81f 100644 --- a/arch/arm64/include/asm/compat.h +++ b/arch/arm64/include/asm/compat.h @@ -228,7 +228,7 @@ static inline compat_uptr_t ptr_to_compat(void __user *uptr) return (u32)(unsigned long)uptr; } -#define compat_user_stack_pointer() (current_pt_regs()->compat_sp) +#define compat_user_stack_pointer() (user_stack_pointer(current_pt_regs())) static inline void __user *arch_compat_alloc_user_space(long len) { diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h index fbb0020..86d5b54 100644 --- a/arch/arm64/include/asm/ptrace.h +++ b/arch/arm64/include/asm/ptrace.h @@ -133,7 +133,7 @@ struct pt_regs { (!((regs)->pstate & PSR_F_BIT)) #define user_stack_pointer(regs) \ - ((regs)->sp) + (!compat_user_mode(regs)) ? ((regs)->sp) : ((regs)->compat_sp) /* * Are the current registers suitable for user mode? (used to maintain -- 1.7.11.7 ^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 3/3] ARM64: perf: support dwarf unwinding in compat mode @ 2014-02-03 18:18 ` Jean Pihet 0 siblings, 0 replies; 24+ messages in thread From: Jean Pihet @ 2014-02-03 18:18 UTC (permalink / raw) To: linux-kernel, linaro-kernel, linux-arm-kernel, Will Deacon Cc: Arnaldo, Ingo Molnar, Jiri Olsa, patches, Jean Pihet Add support for unwinding using the dwarf information in compat mode. Using the correct user stack pointer allows perf to record the frames correctly in the native and compat modes. Note that although the dwarf frame unwinding works ok using libunwind in native mode (on ARMv7 & ARMv8), some changes are required to the libunwind code for the compat mode. Those changes are posted separately on the libunwind mailing list. Tested on ARMv8 platform with v8 and compat v7 binaries, the latter are statically built. Signed-off-by: Jean Pihet <jean.pihet@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> --- arch/arm64/include/asm/compat.h | 2 +- arch/arm64/include/asm/ptrace.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/include/asm/compat.h b/arch/arm64/include/asm/compat.h index fda2704..e71f81f 100644 --- a/arch/arm64/include/asm/compat.h +++ b/arch/arm64/include/asm/compat.h @@ -228,7 +228,7 @@ static inline compat_uptr_t ptr_to_compat(void __user *uptr) return (u32)(unsigned long)uptr; } -#define compat_user_stack_pointer() (current_pt_regs()->compat_sp) +#define compat_user_stack_pointer() (user_stack_pointer(current_pt_regs())) static inline void __user *arch_compat_alloc_user_space(long len) { diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h index fbb0020..86d5b54 100644 --- a/arch/arm64/include/asm/ptrace.h +++ b/arch/arm64/include/asm/ptrace.h @@ -133,7 +133,7 @@ struct pt_regs { (!((regs)->pstate & PSR_F_BIT)) #define user_stack_pointer(regs) \ - ((regs)->sp) + (!compat_user_mode(regs)) ? ((regs)->sp) : ((regs)->compat_sp) /* * Are the current registers suitable for user mode? (used to maintain -- 1.7.11.7 ^ permalink raw reply related [flat|nested] 24+ messages in thread
* [tip:perf/core] ARM64, perf: Support dwarf unwinding in compat mode 2014-02-03 18:18 ` Jean Pihet (?) @ 2014-03-13 7:28 ` tip-bot for Jean Pihet -1 siblings, 0 replies; 24+ messages in thread From: tip-bot for Jean Pihet @ 2014-03-13 7:28 UTC (permalink / raw) To: linux-tip-commits Cc: linux-kernel, hpa, mingo, will.deacon, acme, jean.pihet, jolsa, tglx Commit-ID: 5aa158b708b07bab47147aa164e3948e8a4c548f Gitweb: http://git.kernel.org/tip/5aa158b708b07bab47147aa164e3948e8a4c548f Author: Jean Pihet <jean.pihet@linaro.org> AuthorDate: Mon, 3 Feb 2014 19:18:29 +0100 Committer: Ingo Molnar <mingo@kernel.org> CommitDate: Wed, 12 Mar 2014 13:45:30 +0100 ARM64, perf: Support dwarf unwinding in compat mode Add support for unwinding using the dwarf information in compat mode. Using the correct user stack pointer allows perf to record the frames correctly in the native and compat modes. Note that although the dwarf frame unwinding works ok using libunwind in native mode (on ARMv7 & ARMv8), some changes are required to the libunwind code for the compat mode. Those changes are posted separately on the libunwind mailing list. Tested on ARMv8 platform with v8 and compat v7 binaries, the latter are statically built. Signed-off-by: Jean Pihet <jean.pihet@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Arnaldo <acme@ghostprotocols.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: patches@linaro.org Cc: linaro-kernel@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1391451509-31265-4-git-send-email-jean.pihet@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> --- arch/arm64/include/asm/compat.h | 2 +- arch/arm64/include/asm/ptrace.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/include/asm/compat.h b/arch/arm64/include/asm/compat.h index fda2704..e71f81f 100644 --- a/arch/arm64/include/asm/compat.h +++ b/arch/arm64/include/asm/compat.h @@ -228,7 +228,7 @@ static inline compat_uptr_t ptr_to_compat(void __user *uptr) return (u32)(unsigned long)uptr; } -#define compat_user_stack_pointer() (current_pt_regs()->compat_sp) +#define compat_user_stack_pointer() (user_stack_pointer(current_pt_regs())) static inline void __user *arch_compat_alloc_user_space(long len) { diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h index fbb0020..86d5b54 100644 --- a/arch/arm64/include/asm/ptrace.h +++ b/arch/arm64/include/asm/ptrace.h @@ -133,7 +133,7 @@ struct pt_regs { (!((regs)->pstate & PSR_F_BIT)) #define user_stack_pointer(regs) \ - ((regs)->sp) + (!compat_user_mode(regs)) ? ((regs)->sp) : ((regs)->compat_sp) /* * Are the current registers suitable for user mode? (used to maintain ^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v6 0/3] perf: AARCH64 arch support 2014-02-03 18:18 ` Jean Pihet @ 2014-02-12 8:47 ` Jean Pihet -1 siblings, 0 replies; 24+ messages in thread From: Jean Pihet @ 2014-02-12 8:47 UTC (permalink / raw) To: linux-arm-kernel Hi Will, Ping on the series. Is this OK for inclusion? Regards, Jean On 3 February 2014 19:18, Jean Pihet <jean.pihet@linaro.org> wrote: > Add AARCH64 specific support. This includes the following: > - AARCH64 perf registers definition and hooks, > - compat mode registers use, i.e. profiling a 32-bit binary on > a 64-bit system, > - unwinding using the dwarf information from the .debug_frame > section of the ELF binary, > - unwinding using the frame pointer information; in 64-bit and > compat modes. > > Notes: > - the tools/perf change is submitted separately on LKML, > - support for unwinding using the dwarf information in compat > mode requires some changes to the libunwind code. Those changes > have been submitted on the libunwind ML and are in discussion. > > Tested on ARMv7, ARMv8 and x86_64 platforms. The compat mode has been > tested on ARMv8 using statically built 32-bit binaries. > > > Jean Pihet (3): > ARM64: perf: add support for perf registers API > ARM64: perf: add support for frame pointer unwinding in compat mode > ARM64: perf: support dwarf unwinding in compat mode > > arch/arm64/Kconfig | 2 + > arch/arm64/include/asm/compat.h | 2 +- > arch/arm64/include/asm/ptrace.h | 3 +- > arch/arm64/include/uapi/asm/Kbuild | 1 + > arch/arm64/include/uapi/asm/perf_regs.h | 40 ++++++++++++++++++ > arch/arm64/kernel/Makefile | 1 + > arch/arm64/kernel/perf_event.c | 75 +++++++++++++++++++++++++++++---- > arch/arm64/kernel/perf_regs.c | 44 +++++++++++++++++++ > 8 files changed, 158 insertions(+), 10 deletions(-) > create mode 100644 arch/arm64/include/uapi/asm/perf_regs.h > create mode 100644 arch/arm64/kernel/perf_regs.c > > -- > 1.7.11.7 > ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v6 0/3] perf: AARCH64 arch support @ 2014-02-12 8:47 ` Jean Pihet 0 siblings, 0 replies; 24+ messages in thread From: Jean Pihet @ 2014-02-12 8:47 UTC (permalink / raw) To: linux-kernel@vger.kernel.org, linaro-kernel@lists.linaro.org, linux-arm-kernel@lists.infradead.org, Will Deacon Cc: Arnaldo, Ingo Molnar, Jiri Olsa, Patch Tracking, Jean Pihet Hi Will, Ping on the series. Is this OK for inclusion? Regards, Jean On 3 February 2014 19:18, Jean Pihet <jean.pihet@linaro.org> wrote: > Add AARCH64 specific support. This includes the following: > - AARCH64 perf registers definition and hooks, > - compat mode registers use, i.e. profiling a 32-bit binary on > a 64-bit system, > - unwinding using the dwarf information from the .debug_frame > section of the ELF binary, > - unwinding using the frame pointer information; in 64-bit and > compat modes. > > Notes: > - the tools/perf change is submitted separately on LKML, > - support for unwinding using the dwarf information in compat > mode requires some changes to the libunwind code. Those changes > have been submitted on the libunwind ML and are in discussion. > > Tested on ARMv7, ARMv8 and x86_64 platforms. The compat mode has been > tested on ARMv8 using statically built 32-bit binaries. > > > Jean Pihet (3): > ARM64: perf: add support for perf registers API > ARM64: perf: add support for frame pointer unwinding in compat mode > ARM64: perf: support dwarf unwinding in compat mode > > arch/arm64/Kconfig | 2 + > arch/arm64/include/asm/compat.h | 2 +- > arch/arm64/include/asm/ptrace.h | 3 +- > arch/arm64/include/uapi/asm/Kbuild | 1 + > arch/arm64/include/uapi/asm/perf_regs.h | 40 ++++++++++++++++++ > arch/arm64/kernel/Makefile | 1 + > arch/arm64/kernel/perf_event.c | 75 +++++++++++++++++++++++++++++---- > arch/arm64/kernel/perf_regs.c | 44 +++++++++++++++++++ > 8 files changed, 158 insertions(+), 10 deletions(-) > create mode 100644 arch/arm64/include/uapi/asm/perf_regs.h > create mode 100644 arch/arm64/kernel/perf_regs.c > > -- > 1.7.11.7 > ^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v6 0/3] perf: AARCH64 arch support 2014-02-12 8:47 ` Jean Pihet @ 2014-02-12 10:09 ` Will Deacon -1 siblings, 0 replies; 24+ messages in thread From: Will Deacon @ 2014-02-12 10:09 UTC (permalink / raw) To: linux-arm-kernel On Wed, Feb 12, 2014 at 08:47:17AM +0000, Jean Pihet wrote: > Ping on the series. Is this OK for inclusion? I already acked it all, but you'll need to wait until the next merge window since this isn't a fix. Will ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v6 0/3] perf: AARCH64 arch support @ 2014-02-12 10:09 ` Will Deacon 0 siblings, 0 replies; 24+ messages in thread From: Will Deacon @ 2014-02-12 10:09 UTC (permalink / raw) To: Jean Pihet Cc: linux-kernel@vger.kernel.org, linaro-kernel@lists.linaro.org, linux-arm-kernel@lists.infradead.org, Arnaldo, Ingo Molnar, Jiri Olsa, Patch Tracking On Wed, Feb 12, 2014 at 08:47:17AM +0000, Jean Pihet wrote: > Ping on the series. Is this OK for inclusion? I already acked it all, but you'll need to wait until the next merge window since this isn't a fix. Will ^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v6 0/3] perf: AARCH64 arch support 2014-02-12 10:09 ` Will Deacon @ 2014-03-12 10:19 ` Jean Pihet -1 siblings, 0 replies; 24+ messages in thread From: Jean Pihet @ 2014-03-12 10:19 UTC (permalink / raw) To: linux-arm-kernel Hi! Gentle ping on this series? Which tree is it supposed to land in? I have a new series about libdw integration and unwinding built-in test for AARCH64, which is based on this one. How to handle it? Regards, Jean On 12 February 2014 11:09, Will Deacon <will.deacon@arm.com> wrote: > On Wed, Feb 12, 2014 at 08:47:17AM +0000, Jean Pihet wrote: >> Ping on the series. Is this OK for inclusion? > > I already acked it all, but you'll need to wait until the next merge window > since this isn't a fix. > > Will ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v6 0/3] perf: AARCH64 arch support @ 2014-03-12 10:19 ` Jean Pihet 0 siblings, 0 replies; 24+ messages in thread From: Jean Pihet @ 2014-03-12 10:19 UTC (permalink / raw) To: Will Deacon Cc: linux-kernel@vger.kernel.org, linaro-kernel@lists.linaro.org, linux-arm-kernel@lists.infradead.org, Arnaldo, Ingo Molnar, Jiri Olsa, Patch Tracking Hi! Gentle ping on this series? Which tree is it supposed to land in? I have a new series about libdw integration and unwinding built-in test for AARCH64, which is based on this one. How to handle it? Regards, Jean On 12 February 2014 11:09, Will Deacon <will.deacon@arm.com> wrote: > On Wed, Feb 12, 2014 at 08:47:17AM +0000, Jean Pihet wrote: >> Ping on the series. Is this OK for inclusion? > > I already acked it all, but you'll need to wait until the next merge window > since this isn't a fix. > > Will ^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v6 0/3] perf: AARCH64 arch support 2014-03-12 10:19 ` Jean Pihet @ 2014-03-12 17:31 ` Catalin Marinas -1 siblings, 0 replies; 24+ messages in thread From: Catalin Marinas @ 2014-03-12 17:31 UTC (permalink / raw) To: linux-arm-kernel On Wed, Mar 12, 2014 at 11:19:48AM +0100, Jean Pihet wrote: > Gentle ping on this series? Which tree is it supposed to land in? Since it's only arm64 stuff and Will already acked the series, I'm going to merge it via the arm64 tree. Consider it applied (for the upcoming merging window). -- Catalin ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v6 0/3] perf: AARCH64 arch support @ 2014-03-12 17:31 ` Catalin Marinas 0 siblings, 0 replies; 24+ messages in thread From: Catalin Marinas @ 2014-03-12 17:31 UTC (permalink / raw) To: Jean Pihet Cc: Will Deacon, linaro-kernel@lists.linaro.org, Patch Tracking, linux-kernel@vger.kernel.org, Arnaldo, Jiri Olsa, Ingo Molnar, linux-arm-kernel@lists.infradead.org On Wed, Mar 12, 2014 at 11:19:48AM +0100, Jean Pihet wrote: > Gentle ping on this series? Which tree is it supposed to land in? Since it's only arm64 stuff and Will already acked the series, I'm going to merge it via the arm64 tree. Consider it applied (for the upcoming merging window). -- Catalin ^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v6 0/3] perf: AARCH64 arch support 2014-03-12 17:31 ` Catalin Marinas @ 2014-03-13 12:02 ` Jean Pihet -1 siblings, 0 replies; 24+ messages in thread From: Jean Pihet @ 2014-03-13 12:02 UTC (permalink / raw) To: linux-arm-kernel Hi Catalin, On 12 March 2014 18:31, Catalin Marinas <catalin.marinas@arm.com> wrote: > On Wed, Mar 12, 2014 at 11:19:48AM +0100, Jean Pihet wrote: >> Gentle ping on this series? Which tree is it supposed to land in? > > Since it's only arm64 stuff and Will already acked the series, I'm going > to merge it via the arm64 tree. Consider it applied (for the upcoming > merging window). Great, thanks! Jean > > -- > Catalin ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v6 0/3] perf: AARCH64 arch support @ 2014-03-13 12:02 ` Jean Pihet 0 siblings, 0 replies; 24+ messages in thread From: Jean Pihet @ 2014-03-13 12:02 UTC (permalink / raw) To: Catalin Marinas Cc: Will Deacon, linaro-kernel@lists.linaro.org, Patch Tracking, linux-kernel@vger.kernel.org, Arnaldo, Jiri Olsa, Ingo Molnar, linux-arm-kernel@lists.infradead.org Hi Catalin, On 12 March 2014 18:31, Catalin Marinas <catalin.marinas@arm.com> wrote: > On Wed, Mar 12, 2014 at 11:19:48AM +0100, Jean Pihet wrote: >> Gentle ping on this series? Which tree is it supposed to land in? > > Since it's only arm64 stuff and Will already acked the series, I'm going > to merge it via the arm64 tree. Consider it applied (for the upcoming > merging window). Great, thanks! Jean > > -- > Catalin ^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2014-03-13 12:02 UTC | newest] Thread overview: 24+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-02-03 18:18 [PATCH v6 0/3] perf: AARCH64 arch support Jean Pihet 2014-02-03 18:18 ` Jean Pihet 2014-02-03 18:18 ` [PATCH 1/3] ARM64: perf: add support for perf registers API Jean Pihet 2014-02-03 18:18 ` Jean Pihet 2014-03-13 7:27 ` [tip:perf/core] ARM64, perf: Add " tip-bot for Jean Pihet 2014-03-13 10:19 ` Catalin Marinas 2014-03-13 11:01 ` Ingo Molnar 2014-03-13 11:35 ` Catalin Marinas 2014-02-03 18:18 ` [PATCH 2/3] ARM64: perf: add support for frame pointer unwinding in compat mode Jean Pihet 2014-02-03 18:18 ` Jean Pihet 2014-03-13 7:27 ` [tip:perf/core] ARM64, perf: Add " tip-bot for Jean Pihet 2014-02-03 18:18 ` [PATCH 3/3] ARM64: perf: support dwarf " Jean Pihet 2014-02-03 18:18 ` Jean Pihet 2014-03-13 7:28 ` [tip:perf/core] ARM64, perf: Support " tip-bot for Jean Pihet 2014-02-12 8:47 ` [PATCH v6 0/3] perf: AARCH64 arch support Jean Pihet 2014-02-12 8:47 ` Jean Pihet 2014-02-12 10:09 ` Will Deacon 2014-02-12 10:09 ` Will Deacon 2014-03-12 10:19 ` Jean Pihet 2014-03-12 10:19 ` Jean Pihet 2014-03-12 17:31 ` Catalin Marinas 2014-03-12 17:31 ` Catalin Marinas 2014-03-13 12:02 ` Jean Pihet 2014-03-13 12:02 ` Jean Pihet
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.