From: Marcin Slusarz <marcin.slusarz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Ilia Mirkin <imirkin-FrUbXkNCsVf2fBVCVOL8/A@public.gmane.org>
Cc: "nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org"
<nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org>,
Martin Peres <martin.peres-BktLLJ5BOkI@public.gmane.org>,
"dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org"
<dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org>
Subject: Re: nouveau_fan_update: possible circular locking dependency detected
Date: Thu, 13 Mar 2014 23:20:57 +0100 [thread overview]
Message-ID: <20140313222057.GA2900@joi.home> (raw)
In-Reply-To: <CAKb7UviyaTRBqjcj6wZo=5_rZ+9V8WyMeE6O03nDk1QW-LEYEg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 1363 bytes --]
On Thu, Mar 13, 2014 at 09:38:45AM -0400, Ilia Mirkin wrote:
> On Sun, Mar 9, 2014 at 10:51 AM, Marcin Slusarz
> <marcin.slusarz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> > [ 326.168487] ======================================================
> > [ 326.168491] [ INFO: possible circular locking dependency detected ]
> > [ 326.168496] 3.13.6 #1270 Not tainted
> > [ 326.168500] -------------------------------------------------------
> > [ 326.168504] ldconfig/22297 is trying to acquire lock:
> > [ 326.168507] (&(&priv->fan->lock)->rlock){-.-...}, at: [<ffffffffa00d5363>] nouveau_fan_update+0xeb/0x252 [nouveau]
> > [ 326.168551]
> > but task is already holding lock:
> > [ 326.168555] (&(&priv->sensor.alarm_program_lock)->rlock){-.-...}, at: [<ffffffffa00d6a8a>] alarm_timer_callback+0xf1/0x179 [nouveau]
> > [ 326.168587]
> > which lock already depends on the new lock.
> > (...)
>
> Marcin, how reproducible is this? What hardware was this on? If it's
> reasonably reproducible perhaps it makes sense to file a bug in the
> fd.o tracker?
It happened only once so far (but I don't use this machine every day) - on the
first boot of 3.13 kernel. At that time the machine was quite hot (it was
rebuilding the whole system (Gentoo) *and* CPU fan was dusty), so it probably
affected GPU temperature.
It's NVA8 card (dmesg attached).
Marcin
[-- Attachment #2: d.txt --]
[-- Type: text/plain, Size: 59023 bytes --]
[ 0.000000] Linux version 3.13.6 (marcin@joi) (gcc version 4.7.3 (Gentoo 4.7.3-r1 p1.4, pie-0.5.5) ) #1274 SMP PREEMPT Thu Mar 13 22:55:41 CET 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/kernel-3.13.6 root=UUID=a55f9cc0-8726-4a17-9198-a153da676c85 netconsole=33333-Q0ErXNX1RubLJd2+pq3grw@public.gmane.org/eth0,8888-Q0ErXNX1RuaiuRF/M/dTPA@public.gmane.org/00:06:5b:6a:a5:74
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4c00-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7dbfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf7dc000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bfffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/P6T SE, BIOS 0603 09/02/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E3FFF write-protect
[ 0.000000] E4000-EBFFF write-through
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 1C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 000000000 mask E00000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 7GB, range: 1GB, type UC
[ 0.000000] reg 1, base: 0GB, range: 8GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 1GB, type UC
[ 0.000000] reg 3, base: 3064MB, range: 8MB, type UC
[ 0.000000] total RAM covered: 6136M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 5 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3064MB, range: 8MB, type UC
[ 0.000000] reg 3, base: 4GB, range: 2GB, type WB
[ 0.000000] reg 4, base: 6GB, range: 1GB, type WB
[ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x027db000, 0x027dbfff] PGTABLE
[ 0.000000] BRK [0x027dc000, 0x027dcfff] PGTABLE
[ 0.000000] BRK [0x027dd000, 0x027ddfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1bfe00000-0x1bfffffff]
[ 0.000000] [mem 0x1bfe00000-0x1bfffffff] page 2M
[ 0.000000] BRK [0x027de000, 0x027defff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1bc000000-0x1bfdfffff]
[ 0.000000] [mem 0x1bc000000-0x1bfdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x180000000-0x1bbffffff]
[ 0.000000] [mem 0x180000000-0x1bbffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf77ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbf5fffff] page 2M
[ 0.000000] [mem 0xbf600000-0xbf77ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[ 0.000000] [mem 0x100000000-0x17fffffff] page 2M
[ 0.000000] BRK [0x027df000, 0x027dffff] PGTABLE
[ 0.000000] BRK [0x027e0000, 0x027e0fff] PGTABLE
[ 0.000000] ACPI: RSDP 00000000000fb250 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf780100 000064 (v01 090209 XSDT1920 20090902 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf780290 0000F4 (v03 090209 FACP1920 20090902 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7804b0 00C2E4 (v01 A1279 A1279001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf798000 000040
[ 0.000000] ACPI: APIC 00000000bf780390 0000D8 (v01 090209 APIC1920 20090902 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf780470 00003C (v01 090209 OEMMCFG 20090902 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf798040 000072 (v01 090209 OEMB1920 20090902 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf78f4b0 000038 (v01 090209 OEMHPET 20090902 MSFT 00000097)
[ 0.000000] ACPI: DMAR 00000000bf7980c0 000138 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf78f4f0 0000B0 (v01 090209 OEMOSFR 20090902 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf79a280 00249F (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea0006ffffff] PMD -> [ffff8801b9600000-ffff8801bf5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x1bfffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbf77ffff]
[ 0.000000] node 0: [mem 0x100000000-0x1bfffffff]
[ 0.000000] On node 0 totalpages: 1570590
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12190 pages used for memmap
[ 0.000000] DMA32 zone: 780160 pages, LIFO batch:31
[ 0.000000] Normal zone: 12288 pages used for memmap
[ 0.000000] Normal zone: 786432 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: 16 Processors exceeds NR_CPUS limit of 8
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 64
[ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8801bfc00000 s82624 r8192 d23872 u262144
[ 0.000000] pcpu-alloc: s82624 r8192 d23872 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1546027
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/kernel-3.13.6 root=UUID=a55f9cc0-8726-4a17-9198-a153da676c85 netconsole=33333-Q0ErXNX1RubLJd2+pq3grw@public.gmane.org/eth0,8888-Q0ErXNX1RuaiuRF/M/dTPA@public.gmane.org/00:06:5b:6a:a5:74
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 6079736K/6282360K available (5800K kernel code, 690K rwdata, 2804K rodata, 2140K init, 11324K bss, 202624K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:1152 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 5855 kB
[ 0.000000] per task-struct memory footprint: 1920 bytes
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.010000] tsc: Detected 2672.871 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5345.74 BogoMIPS (lpj=26728710)
[ 0.000498] pid_max: default: 32768 minimum: 301
[ 0.000853] Mount-cache hash table entries: 256
[ 0.001802] CPU: Physical Processor ID: 0
[ 0.002048] CPU: Processor Core ID: 0
[ 0.002295] mce: CPU supports 9 MCE banks
[ 0.002547] CPU0: Thermal monitoring enabled (TM1)
[ 0.002805] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
[ 0.003630] Freeing SMP alternatives memory: 24K (ffffffff90cc5000 - ffffffff90ccb000)
[ 0.004092] ACPI: Core revision 20131115
[ 0.011156] ACPI: All ACPI Tables successfully acquired
[ 0.036875] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.137104] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz (fam: 06, model: 1a, stepping: 05)
[ 0.267639] APIC calibration not consistent with PM-Timer: 119ms instead of 100ms
[ 0.268101] APIC delta adjusted to PM-Timer: 835225 (1002266)
[ 0.268370] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.268955] perf_event_intel: CPU erratum AAJ80 worked around
[ 0.269203] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.269465] ... version: 3
[ 0.269710] ... bit width: 48
[ 0.269954] ... generic registers: 4
[ 0.270199] ... value mask: 0000ffffffffffff
[ 0.270447] ... max period: 000000007fffffff
[ 0.270694] ... fixed-purpose events: 3
[ 0.270939] ... event mask: 000000070000000f
[ 0.348556] x86: Booting SMP configuration:
[ 0.362361] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.348803] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.541725] x86: Booted up 1 node, 8 CPUs
[ 0.542211] smpboot: Total of 8 processors activated (42765.93 BogoMIPS)
[ 0.548390] devtmpfs: initialized
[ 0.549004] PM: Registering ACPI NVS region [mem 0xbf798000-0xbf7dbfff] (278528 bytes)
[ 0.550036] xor: measuring software checksum speed
[ 0.648280] prefetch64-sse: 10882.400 MB/sec
[ 0.748246] generic_sse: 9634.800 MB/sec
[ 0.748495] xor: using function: prefetch64-sse (10882.400 MB/sec)
[ 0.748957] NET: Registered protocol family 16
[ 0.749975] cpuidle: using governor ladder
[ 0.750222] cpuidle: using governor menu
[ 0.750516] ACPI: bus type PCI registered
[ 0.750932] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.751394] PCI: not using MMCONFIG
[ 0.751639] PCI: Using configuration type 1 for base access
[ 0.762810] bio: create slab <bio-0> at 0
[ 0.928188] raid6: sse2x1 6630 MB/s
[ 1.098122] raid6: sse2x2 7615 MB/s
[ 1.268065] raid6: sse2x4 8579 MB/s
[ 1.268313] raid6: using algorithm sse2x4 (8579 MB/s)
[ 1.268560] raid6: using ssse3x2 recovery algorithm
[ 1.269003] ACPI: Added _OSI(Module Device)
[ 1.269250] ACPI: Added _OSI(Processor Device)
[ 1.269496] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.269743] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.278304] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.307822] ACPI: SSDT 00000000bf798200 000403 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 1.309368] ACPI: Dynamic OEM Table Load:
[ 1.309676] ACPI: SSDT (null) 000403 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 1.310628] ACPI: SSDT 00000000bf798610 000403 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
[ 1.312160] ACPI: Dynamic OEM Table Load:
[ 1.312467] ACPI: SSDT (null) 000403 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
[ 1.313418] ACPI: SSDT 00000000bf798a20 000403 (v01 DpgPmm P003Ist 00000012 INTL 20060113)
[ 1.314957] ACPI: Dynamic OEM Table Load:
[ 1.320438] ACPI: SSDT (null) 000403 (v01 DpgPmm P003Ist 00000012 INTL 20060113)
[ 1.321400] ACPI: SSDT 00000000bf798e30 000403 (v01 DpgPmm P004Ist 00000012 INTL 20060113)
[ 1.322944] ACPI: Dynamic OEM Table Load:
[ 1.323251] ACPI: SSDT (null) 000403 (v01 DpgPmm P004Ist 00000012 INTL 20060113)
[ 1.358491] ACPI: SSDT 00000000bf799240 000403 (v01 DpgPmm P005Ist 00000012 INTL 20060113)
[ 1.360040] ACPI: Dynamic OEM Table Load:
[ 1.360347] ACPI: SSDT (null) 000403 (v01 DpgPmm P005Ist 00000012 INTL 20060113)
[ 1.388477] ACPI: SSDT 00000000bf799650 000403 (v01 DpgPmm P006Ist 00000012 INTL 20060113)
[ 1.390030] ACPI: Dynamic OEM Table Load:
[ 1.390337] ACPI: SSDT (null) 000403 (v01 DpgPmm P006Ist 00000012 INTL 20060113)
[ 1.418484] ACPI: SSDT 00000000bf799a60 000403 (v01 DpgPmm P007Ist 00000012 INTL 20060113)
[ 1.420043] ACPI: Dynamic OEM Table Load:
[ 1.420350] ACPI: SSDT (null) 000403 (v01 DpgPmm P007Ist 00000012 INTL 20060113)
[ 1.478119] ACPI: SSDT 00000000bf799e70 000403 (v01 DpgPmm P008Ist 00000012 INTL 20060113)
[ 1.479704] ACPI: Dynamic OEM Table Load:
[ 1.480011] ACPI: SSDT (null) 000403 (v01 DpgPmm P008Ist 00000012 INTL 20060113)
[ 1.480928] ACPI: Interpreter enabled
[ 1.481184] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 1.481742] ACPI: (supports S0 S1 S3 S5)
[ 1.481992] ACPI: Using IOAPIC for interrupt routing
[ 1.482274] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.485270] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 1.502434] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.522379] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.522635] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 1.523140] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 1.523735] PCI host bridge to bus 0000:00
[ 1.523983] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.524233] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.524483] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.524734] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.524986] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 1.525237] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 1.525489] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
[ 1.525784] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
[ 1.525881] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.526156] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[ 1.526228] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.526437] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 1.526779] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[ 1.526855] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.527002] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 1.527343] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[ 1.527414] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.527561] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 1.527907] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[ 1.528172] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[ 1.528427] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[ 1.528680] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
[ 1.528930] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[ 1.528983] pci 0000:00:1a.0: reg 0x20: [io 0xb800-0xb81f]
[ 1.529204] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 1.529541] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[ 1.529594] pci 0000:00:1a.1: reg 0x20: [io 0xb880-0xb89f]
[ 1.529800] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 1.530140] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[ 1.530193] pci 0000:00:1a.2: reg 0x20: [io 0xbc00-0xbc1f]
[ 1.530399] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 1.530747] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[ 1.530773] pci 0000:00:1a.7: reg 0x10: [mem 0xf9fff000-0xf9fff3ff]
[ 1.530883] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.531032] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 1.531378] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[ 1.531398] pci 0000:00:1b.0: reg 0x10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
[ 1.531483] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.531712] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[ 1.531801] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.531948] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 1.532286] pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400
[ 1.532374] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.532520] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 1.532855] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[ 1.532943] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.533090] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 1.533428] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[ 1.533481] pci 0000:00:1d.0: reg 0x20: [io 0xb080-0xb09f]
[ 1.533687] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1.534023] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[ 1.534075] pci 0000:00:1d.1: reg 0x20: [io 0xb400-0xb41f]
[ 1.534283] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 1.534621] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[ 1.534674] pci 0000:00:1d.2: reg 0x20: [io 0xb480-0xb49f]
[ 1.534879] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 1.535227] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[ 1.535253] pci 0000:00:1d.7: reg 0x10: [mem 0xf9ffe000-0xf9ffe3ff]
[ 1.535363] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.535510] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 1.535845] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 1.536034] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 1.536371] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[ 1.536465] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
[ 1.536940] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 1.537195] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 1.537657] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
[ 1.538366] pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018f
[ 1.538386] pci 0000:00:1f.2: reg 0x10: [io 0xa000-0xa007]
[ 1.538396] pci 0000:00:1f.2: reg 0x14: [io 0x9c00-0x9c03]
[ 1.538406] pci 0000:00:1f.2: reg 0x18: [io 0x9880-0x9887]
[ 1.538416] pci 0000:00:1f.2: reg 0x1c: [io 0x9800-0x9803]
[ 1.538426] pci 0000:00:1f.2: reg 0x20: [io 0x9480-0x948f]
[ 1.538436] pci 0000:00:1f.2: reg 0x24: [io 0x9400-0x940f]
[ 1.538685] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[ 1.538704] pci 0000:00:1f.3: reg 0x10: [mem 0xf9ffd000-0xf9ffd0ff 64bit]
[ 1.538730] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 1.538956] pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185
[ 1.538976] pci 0000:00:1f.5: reg 0x10: [io 0xb000-0xb007]
[ 1.538986] pci 0000:00:1f.5: reg 0x14: [io 0xac00-0xac03]
[ 1.538996] pci 0000:00:1f.5: reg 0x18: [io 0xa880-0xa887]
[ 1.539006] pci 0000:00:1f.5: reg 0x1c: [io 0xa800-0xa803]
[ 1.539016] pci 0000:00:1f.5: reg 0x20: [io 0xa480-0xa48f]
[ 1.539026] pci 0000:00:1f.5: reg 0x24: [io 0xa400-0xa40f]
[ 1.539362] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.539725] pci 0000:02:00.0: [10de:0a65] type 00 class 0x030000
[ 1.539739] pci 0000:02:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 1.539753] pci 0000:02:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.539767] pci 0000:02:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref]
[ 1.539776] pci 0000:02:00.0: reg 0x24: [io 0xcc00-0xcc7f]
[ 1.539786] pci 0000:02:00.0: reg 0x30: [mem 0xfbc00000-0xfbc7ffff pref]
[ 1.539931] pci 0000:02:00.1: [10de:0be3] type 00 class 0x040300
[ 1.539944] pci 0000:02:00.1: reg 0x10: [mem 0xfbcfc000-0xfbcfffff]
[ 1.558093] pci 0000:00:03.0: PCI bridge to [bus 02]
[ 1.558352] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 1.558356] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff]
[ 1.558363] pci 0000:00:03.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 1.558466] pci 0000:00:07.0: PCI bridge to [bus 03]
[ 1.558823] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 1.559082] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 1.559205] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 1.559226] pci 0000:05:00.0: reg 0x10: [io 0xe800-0xe8ff]
[ 1.559258] pci 0000:05:00.0: reg 0x18: [mem 0xfbeff000-0xfbefffff 64bit]
[ 1.559279] pci 0000:05:00.0: reg 0x20: [mem 0xf8ef0000-0xf8efffff 64bit pref]
[ 1.559294] pci 0000:05:00.0: reg 0x30: [mem 0xfbec0000-0xfbedffff pref]
[ 1.559371] pci 0000:05:00.0: supports D1 D2
[ 1.559373] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.578085] pci 0000:00:1c.2: PCI bridge to [bus 05]
[ 1.578343] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 1.578348] pci 0000:00:1c.2: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.578355] pci 0000:00:1c.2: bridge window [mem 0xf8e00000-0xf8efffff 64bit pref]
[ 1.578483] pci 0000:04:00.0: [197b:2363] type 00 class 0x010185
[ 1.578584] pci 0000:04:00.0: reg 0x24: [mem 0xfbdfe000-0xfbdfffff]
[ 1.578600] pci 0000:04:00.0: reg 0x30: [mem 0xfbde0000-0xfbdeffff pref]
[ 1.578660] pci 0000:04:00.0: PME# supported from D3hot
[ 1.578791] pci 0000:04:00.1: [197b:2363] type 00 class 0x010185
[ 1.578816] pci 0000:04:00.1: reg 0x10: [io 0xdc00-0xdc07]
[ 1.578828] pci 0000:04:00.1: reg 0x14: [io 0xd880-0xd883]
[ 1.578840] pci 0000:04:00.1: reg 0x18: [io 0xd800-0xd807]
[ 1.578852] pci 0000:04:00.1: reg 0x1c: [io 0xd480-0xd483]
[ 1.578864] pci 0000:04:00.1: reg 0x20: [io 0xd400-0xd40f]
[ 1.579035] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 1.579511] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 1.579762] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 1.579767] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.579899] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[ 1.580162] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.580165] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.580167] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.580170] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 1.580172] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 1.580175] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 1.580228] pci_bus 0000:00: on NUMA node 0
[ 1.581886] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 1.582577] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 1.583014] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 1.583702] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 1.584390] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 1.585078] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
[ 1.585765] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 1.586453] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
[ 1.587473] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 1.587792] ACPI: \_SB_.PCI0: notify handler is installed
[ 1.587921] Found 1 acpi root devices
[ 1.588422] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.588885] vgaarb: loaded
[ 1.589128] vgaarb: bridge control possible 0000:02:00.0
[ 1.589556] SCSI subsystem initialized
[ 1.589989] libata version 3.00 loaded.
[ 1.590002] ACPI: bus type USB registered
[ 1.590347] usbcore: registered new interface driver usbfs
[ 1.590643] usbcore: registered new interface driver hub
[ 1.590955] usbcore: registered new device driver usb
[ 1.591410] EDAC MC: Ver: 3.0.0
[ 1.591990] wmi: Mapper loaded
[ 1.592327] Advanced Linux Sound Architecture Driver Initialized.
[ 1.592578] PCI: Using ACPI for IRQ routing
[ 1.599713] PCI: Discovered peer bus ff
[ 1.599960] PCI: root bus ff: using default resources
[ 1.599962] PCI: Probing PCI hardware (bus ff)
[ 1.600026] PCI host bridge to bus 0000:ff
[ 1.600275] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
[ 1.600526] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[ 1.600779] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[ 1.601245] pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
[ 1.601361] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
[ 1.601474] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
[ 1.601568] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
[ 1.601664] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
[ 1.601756] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
[ 1.601849] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
[ 1.601941] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
[ 1.602033] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
[ 1.602125] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
[ 1.602217] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
[ 1.602312] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
[ 1.602408] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
[ 1.602502] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
[ 1.602594] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
[ 1.602690] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
[ 1.602781] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
[ 1.602871] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
[ 1.602962] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
[ 1.603077] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[ 1.603087] PCI: pci_cache_line_size set to 64 bytes
[ 1.603195] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 1.603202] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
[ 1.603717] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 1.603973] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.604377] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.608104] Switched to clocksource hpet
[ 1.621924] pnp: PnP ACPI init
[ 1.622193] ACPI: bus type PNP registered
[ 1.622613] system 00:00: [mem 0xfbf00000-0xfbffffff] has been reserved
[ 1.622867] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[ 1.623120] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[ 1.623373] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[ 1.623626] system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved
[ 1.623879] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
[ 1.624191] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.624260] pnp 00:01: [dma 4]
[ 1.624335] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.624434] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.624514] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 1.624599] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.624925] system 00:05: [io 0x0290-0x029f] has been reserved
[ 1.625179] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.625494] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 1.625747] system 00:06: [io 0x0800-0x087f] could not be reserved
[ 1.625999] system 00:06: [io 0x0500-0x057f] could not be reserved
[ 1.626252] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.626504] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.626757] system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 1.627011] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.627173] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.627314] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.627470] system 00:09: [mem 0xffc00000-0xffdfffff] has been reserved
[ 1.627726] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.627941] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.628204] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.628458] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.628671] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.628927] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.629324] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.629580] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 1.629833] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.630087] system 00:0c: [mem 0x00100000-0xbfffffff] could not be reserved
[ 1.630341] system 00:0c: [mem 0xfed90000-0xffffffff] could not be reserved
[ 1.630596] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.630786] pnp: PnP ACPI: found 13 devices
[ 1.631033] ACPI: bus type PNP unregistered
[ 1.641953] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
[ 1.641958] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 400000
[ 1.641975] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[ 1.641991] pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment
[ 1.642246] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[ 1.642249] pci 0000:00:1c.4: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 1.642252] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 1.642257] pci 0000:00:1c.0: BAR 8: assigned [mem 0xc0000000-0xc03fffff]
[ 1.642511] pci 0000:00:1c.4: BAR 9: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.642973] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 1.643226] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.643484] pci 0000:00:03.0: PCI bridge to [bus 02]
[ 1.643735] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 1.643989] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff]
[ 1.644244] pci 0000:00:03.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 1.644709] pci 0000:00:07.0: PCI bridge to [bus 03]
[ 1.644967] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 1.645217] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 1.645472] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
[ 1.645727] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 1.646193] pci 0000:00:1c.2: PCI bridge to [bus 05]
[ 1.646443] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 1.646698] pci 0000:00:1c.2: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.646953] pci 0000:00:1c.2: bridge window [mem 0xf8e00000-0xf8efffff 64bit pref]
[ 1.647419] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 1.647668] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 1.647922] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.648184] pci 0000:00:1c.4: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.648655] pci 0000:00:1e.0: PCI bridge to [bus 07]
[ 1.648914] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.648917] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.648919] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.648921] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.648924] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 1.648926] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.648929] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 1.648931] pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfbcfffff]
[ 1.648934] pci_bus 0000:02: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[ 1.648936] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
[ 1.648939] pci_bus 0000:06: resource 1 [mem 0xc0000000-0xc03fffff]
[ 1.648941] pci_bus 0000:06: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 1.648943] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 1.648946] pci_bus 0000:05: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 1.648948] pci_bus 0000:05: resource 2 [mem 0xf8e00000-0xf8efffff 64bit pref]
[ 1.648951] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 1.648953] pci_bus 0000:04: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 1.648955] pci_bus 0000:04: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.648958] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 1.648960] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 1.648963] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.648965] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.648967] pci_bus 0000:07: resource 8 [mem 0xc0000000-0xdfffffff]
[ 1.648970] pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.648973] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
[ 1.648975] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[ 1.649018] NET: Registered protocol family 2
[ 1.649570] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.650142] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
[ 1.654299] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.654599] TCP: reno registered
[ 1.654862] UDP hash table entries: 4096 (order: 7, 655360 bytes)
[ 1.655625] UDP-Lite hash table entries: 4096 (order: 7, 655360 bytes)
[ 1.656565] NET: Registered protocol family 1
[ 1.657057] RPC: Registered named UNIX socket transport module.
[ 1.657309] RPC: Registered udp transport module.
[ 1.657556] RPC: Registered tcp transport module.
[ 1.657804] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.668329] pci 0000:02:00.0: Boot video device
[ 1.668384] PCI: CLS 64 bytes, default 64
[ 1.686643] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.686898] software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff]
[ 1.687486] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 1.691248] audit: initializing netlink socket (disabled)
[ 1.691531] type=2000 audit(1394748036.550:1): initialized
[ 1.700643] fuse init (API version 7.22)
[ 1.701838] bio: create slab <bio-1> at 1
[ 1.702578] Btrfs loaded
[ 1.702830] msgmni has been set to 11874
[ 1.703883] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.704357] io scheduler noop registered
[ 1.704766] io scheduler cfq registered (default)
[ 1.705393] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[ 1.706105] pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
[ 1.706677] pcieport 0000:00:1c.2: irq 65 for MSI/MSI-X
[ 1.707170] pcieport 0000:00:1c.4: irq 66 for MSI/MSI-X
[ 1.707872] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.708383] ACPI: Power Button [PWRB]
[ 1.708731] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.709194] ACPI: Power Button [PWRF]
[ 1.765871] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.767417] Linux agpgart interface v0.103
[ 1.769847] loop: module loaded
[ 1.770366] ahci 0000:04:00.0: version 3.0
[ 1.788118] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.788583] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.789674] scsi0 : ahci
[ 1.790219] scsi1 : ahci
[ 1.790616] ata1: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe100 irq 16
[ 1.791079] ata2: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe180 irq 16
[ 1.791785] ata_piix 0000:00:1f.2: version 2.13
[ 1.792186] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.794969] scsi2 : ata_piix
[ 1.795385] scsi3 : ata_piix
[ 1.795766] ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 20
[ 1.796022] ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 20
[ 1.796670] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.798976] scsi4 : ata_piix
[ 1.799392] scsi5 : ata_piix
[ 1.799772] ata5: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 20
[ 1.800028] ata6: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 20
[ 1.800420] pata_jmicron 0000:04:00.1: enabling device (0000 -> 0001)
[ 1.802114] scsi6 : pata_jmicron
[ 1.802522] scsi7 : pata_jmicron
[ 1.802911] ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[ 1.803165] ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[ 1.803556] tun: Universal TUN/TAP device driver, 1.6
[ 1.803807] tun: (C) 1999-2004 Max Krasnyansky <maxk-zC7DfRvBq/JWk0Htik3J/w@public.gmane.org>
[ 1.804209] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.804469] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.805144] r8169 0000:05:00.0: irq 67 for MSI/MSI-X
[ 1.805503] r8169 0000:05:00.0 eth0: RTL8168c/8111c at 0xffffc9000003c000, 90:e6:ba:78:06:e6, XID 1c4000c0 IRQ 67
[ 1.805971] r8169 0000:05:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 1.806578] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.806830] ehci-pci: EHCI PCI platform driver
[ 1.807560] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 1.807903] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.808400] ehci-pci 0000:00:1a.7: debug port 1
[ 1.812590] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 1.812635] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9fff000
[ 1.828073] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.828524] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.828778] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.829238] usb usb1: Product: EHCI Host Controller
[ 1.829486] usb usb1: Manufacturer: Linux 3.13.6 ehci_hcd
[ 1.829735] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.830598] hub 1-0:1.0: USB hub found
[ 1.830895] hub 1-0:1.0: 6 ports detected
[ 1.831911] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.832178] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.832651] ehci-pci 0000:00:1d.7: debug port 1
[ 1.836782] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.836805] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9ffe000
[ 1.848054] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.848363] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.848617] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.849083] usb usb2: Product: EHCI Host Controller
[ 1.849331] usb usb2: Manufacturer: Linux 3.13.6 ehci_hcd
[ 1.849580] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.850084] hub 2-0:1.0: USB hub found
[ 1.850342] hub 2-0:1.0: 6 ports detected
[ 1.850842] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.851494] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.851756] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.852242] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 1.852586] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.852840] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.853298] usb usb3: Product: UHCI Host Controller
[ 1.853546] usb usb3: Manufacturer: Linux 3.13.6 uhci_hcd
[ 1.853796] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.854292] hub 3-0:1.0: USB hub found
[ 1.854560] hub 3-0:1.0: 2 ports detected
[ 1.855342] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.855600] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.856099] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 1.856420] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.856673] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.857132] usb usb4: Product: UHCI Host Controller
[ 1.857381] usb usb4: Manufacturer: Linux 3.13.6 uhci_hcd
[ 1.857629] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.858146] hub 4-0:1.0: USB hub found
[ 1.858404] hub 4-0:1.0: 2 ports detected
[ 1.859155] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.859413] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.859913] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000bc00
[ 1.860232] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.860485] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.860944] usb usb5: Product: UHCI Host Controller
[ 1.861192] usb usb5: Manufacturer: Linux 3.13.6 uhci_hcd
[ 1.861442] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.861937] hub 5-0:1.0: USB hub found
[ 1.862194] hub 5-0:1.0: 2 ports detected
[ 1.862948] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.863207] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.863691] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 1.864010] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.864263] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.864723] usb usb6: Product: UHCI Host Controller
[ 1.864971] usb usb6: Manufacturer: Linux 3.13.6 uhci_hcd
[ 1.865220] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.865717] hub 6-0:1.0: USB hub found
[ 1.865974] hub 6-0:1.0: 2 ports detected
[ 1.866725] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.866984] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.867469] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 1.867788] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.868052] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.868511] usb usb7: Product: UHCI Host Controller
[ 1.868760] usb usb7: Manufacturer: Linux 3.13.6 uhci_hcd
[ 1.869009] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.869505] hub 7-0:1.0: USB hub found
[ 1.869763] hub 7-0:1.0: 2 ports detected
[ 1.870513] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.870771] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.871255] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 1.871575] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.871830] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.872289] usb usb8: Product: UHCI Host Controller
[ 1.872537] usb usb8: Manufacturer: Linux 3.13.6 uhci_hcd
[ 1.872787] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.873284] hub 8-0:1.0: USB hub found
[ 1.873541] hub 8-0:1.0: 2 ports detected
[ 1.874067] usbcore: registered new interface driver usb-storage
[ 1.874625] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.877597] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.877889] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.878381] mousedev: PS/2 mouse device common for all mice
[ 1.879322] rtc_cmos 00:02: RTC can wake from S4
[ 1.879854] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.880138] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.880654] i2c /dev entries driver
[ 1.881336] ACPI Warning: 0x0000000000000400-0x000000000000041f SystemIO conflicts with Region \SMRG 1 (20131115/utaddress-251)
[ 1.881870] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.883695] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
[ 1.884440] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
[ 1.884913] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 1.891282] usbcore: registered new interface driver usbhid
[ 1.891533] usbhid: USB HID core driver
[ 1.893540] snd_hda_intel 0000:00:1b.0: irq 68 for MSI/MSI-X
[ 1.917057] hda_intel: Disabling MSI
[ 1.978607] ata7.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A102, max UDMA/33
[ 2.018543] ata7.00: configured for UDMA/33
[ 2.137962] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.138257] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.158698] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.169720] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.217950] usb 1-3: new high-speed USB device number 3 using ehci-pci
[ 2.370373] usb 1-3: New USB device found, idVendor=058f, idProduct=6362
[ 2.370634] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.370887] usb 1-3: Product: Mass Storage Device
[ 2.371135] usb 1-3: Manufacturer: Generic
[ 2.371381] usb 1-3: SerialNumber: 058F312D81B
[ 2.372119] usb-storage 1-3:1.0: USB Mass Storage device detected
[ 2.372466] scsi8 : usb-storage 1-3:1.0
[ 2.498708] ata3.00: SATA link down (SStatus 0 SControl 300)
[ 2.498971] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 2.647841] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.648105] ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.687830] tsc: Refined TSC clocksource calibration: 2672.726 MHz
[ 2.688297] ata4.00: ATA-9: INTEL SSDSC2CW060A3, 400i, max UDMA/133
[ 2.688556] ata4.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.688945] ata4.01: ATA-7: SAMSUNG HD753LJ, 1AA01118, max UDMA7
[ 2.689203] ata4.01: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.708249] ata4.00: configured for UDMA/133
[ 2.728000] ata4.01: configured for UDMA/133
[ 2.728681] scsi 3:0:0:0: Direct-Access ATA INTEL SSDSC2CW06 400i PQ: 0 ANSI: 5
[ 2.729862] sd 3:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 2.730198] sd 3:0:0:0: Attached scsi generic sg0 type 0
[ 2.730630] scsi 3:0:1:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5
[ 2.730724] sd 3:0:0:0: [sda] Write Protect is off
[ 2.730726] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.730769] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.731960] sda: sda1 sda2
[ 2.732151] sd 3:0:1:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 2.732277] sd 3:0:1:0: [sdb] Write Protect is off
[ 2.732279] sd 3:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.732312] sd 3:0:1:0: Attached scsi generic sg1 type 0
[ 2.732324] sd 3:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.736375] scsi 6:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B A102 PQ: 0 ANSI: 5
[ 2.743017] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.743485] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.744159] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 2.744342] sr 6:0:0:0: Attached scsi generic sg2 type 5
[ 2.747958] sd 3:0:0:0: [sda] Attached SCSI disk
[ 2.797794] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 sdb9 > sdb4
[ 2.799417] sd 3:0:1:0: [sdb] Attached SCSI disk
[ 2.807749] usb 3-2: new low-speed USB device number 2 using uhci_hcd
[ 3.137128] usb 3-2: New USB device found, idVendor=046d, idProduct=c30e
[ 3.137389] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.137660] usb 3-2: Product: HID compliant keyboard
[ 3.137910] usb 3-2: Manufacturer: Logitech
[ 3.211724] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input5
[ 3.212452] hid-generic 0003:046D:C30E.0001: input: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:1a.0-2/input0
[ 3.338230] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input6
[ 3.338804] hid-generic 0003:046D:C30E.0002: input: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:1a.0-2/input1
[ 3.368701] scsi 8:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 3.369684] scsi 8:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 3.370684] scsi 8:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 3.371683] scsi 8:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 3.372946] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 3.373664] sd 8:0:0:1: Attached scsi generic sg4 type 0
[ 3.374406] sd 8:0:0:2: Attached scsi generic sg5 type 0
[ 3.375125] sd 8:0:0:3: Attached scsi generic sg6 type 0
[ 3.377046] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 3.378545] sd 8:0:0:2: [sde] Attached SCSI removable disk
[ 3.379174] sd 8:0:0:1: [sdd] Attached SCSI removable disk
[ 3.381420] sd 8:0:0:3: [sdf] Attached SCSI removable disk
[ 3.667469] hda_codec: cannot build controls for #1 (error -16)
[ 3.687502] hda_codec: cannot build controls for #2 (error -16)
[ 3.687768] Switched to clocksource tsc
[ 3.707418] hda_codec: cannot build controls for #3 (error -16)
[ 3.708317] oprofile: using NMI interrupt.
[ 3.708832] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.709291] TCP: cubic registered
[ 3.709537] Initializing XFRM netlink socket
[ 3.709801] NET: Registered protocol family 17
[ 3.710348] Bridge firewalling registered
[ 3.711575] registered taskstats version 1
[ 3.712653] netpoll: netconsole: local port 33333
[ 3.712903] netpoll: netconsole: local IPv4 address 192.168.1.123
[ 3.713153] netpoll: netconsole: interface 'eth0'
[ 3.713400] netpoll: netconsole: remote port 8888
[ 3.713647] netpoll: netconsole: remote IPv4 address 192.168.1.102
[ 3.713898] netpoll: netconsole: remote ethernet address 00:06:5b:6a:a5:74
[ 3.714150] netpoll: netconsole: device eth0 not up yet, forcing it
[ 3.728717] r8169 0000:05:00.0 eth0: link down
[ 3.728764] r8169 0000:05:00.0 eth0: link down
[ 5.897671] r8169 0000:05:00.0 eth0: link up
[ 5.912241] console [netcon0] enabled
[ 5.912491] netconsole: network logging started
[ 5.912775] rtc_cmos 00:02: setting system clock to 2014-03-13 22:00:41 UTC (1394748041)
[ 5.920002] ALSA device list:
[ 5.920255] #0: HDA Intel at 0xf9ff8000 irq 68
[ 5.920504] #1: HDA NVidia at 0xfbcfc000 irq 34
[ 5.920784] Warning: unable to open an initial console.
[ 5.922586] Freeing unused kernel memory: 2140K (ffffffff90aae000 - ffffffff90cc5000)
[ 5.923049] Write protecting the kernel read-only data: 10240k
[ 5.924187] Freeing unused kernel memory: 332K (ffff8800015ad000 - ffff880001600000)
[ 5.927158] Freeing unused kernel memory: 1292K (ffff8800018bd000 - ffff880001a00000)
[ 6.320907] UDF-fs: warning (device sda1): udf_fill_super: No partition found (2)
[ 6.321889] btrfs: device fsid a55f9cc0-8726-4a17-9198-a153da676c85 devid 1 transid 130428 /dev/sda1
[ 6.342679] Btrfs detected SSD devices, enabling SSD mode
[ 7.430884] random: nonblocking pool is initialized
[ 7.604325] systemd-udevd[1806]: starting version 210
[ 7.726828] [drm] Initialized drm 1.1.0 20060810
[ 7.754383] nouveau [ DEVICE][0000:02:00.0] BOOT0 : 0x0a8280b1
[ 7.754388] nouveau [ DEVICE][0000:02:00.0] Chipset: GT218 (NVA8)
[ 7.754391] nouveau [ DEVICE][0000:02:00.0] Family : NV50
[ 7.756566] nouveau [ VBIOS][0000:02:00.0] checking PRAMIN for image...
[ 7.824973] nouveau [ VBIOS][0000:02:00.0] ... appears to be valid
[ 7.824977] nouveau [ VBIOS][0000:02:00.0] using image from PRAMIN
[ 7.825110] nouveau [ VBIOS][0000:02:00.0] BIT signature found
[ 7.825113] nouveau [ VBIOS][0000:02:00.0] version 70.18.83.00.0f
[ 7.831942] nouveau 0000:02:00.0: irq 69 for MSI/MSI-X
[ 7.832090] nouveau [ PMC][0000:02:00.0] MSI interrupts enabled
[ 7.832205] nouveau [ PFB][0000:02:00.0] RAM type: DDR3
[ 7.832209] nouveau [ PFB][0000:02:00.0] RAM size: 512 MiB
[ 7.832213] nouveau [ PFB][0000:02:00.0] ZCOMP: 960 tags
[ 7.842202] nouveau [ VOLT][0000:02:00.0] GPU voltage: 900000uv
[ 7.986834] btrfs: device fsid bacdf4ee-3b0c-423f-8f03-3701a7f24b74 devid 1 transid 155206 /dev/sda2
[ 7.990360] btrfs: device fsid a55f9cc0-8726-4a17-9198-a153da676c85 devid 1 transid 130428 /dev/sda1
[ 11.034942] nouveau [ PTHERM][0000:02:00.0] FAN control: PWM
[ 11.034954] nouveau [ PTHERM][0000:02:00.0] fan management: automatic
[ 11.035097] nouveau [ PTHERM][0000:02:00.0] internal sensor: yes
[ 11.035162] nouveau [ CLK][0000:02:00.0] 03: core 135 MHz shader 270 MHz memory 135 MHz
[ 11.035167] nouveau [ CLK][0000:02:00.0] 0f: core 590 MHz shader 1405 MHz memory 800 MHz
[ 11.035187] nouveau [ CLK][0000:02:00.0] --: core 405 MHz shader 810 MHz memory 405 MHz
[ 11.035649] [TTM] Zone kernel: Available graphics memory: 3041762 kiB
[ 11.035651] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 11.035653] [TTM] Initializing pool allocator
[ 11.035670] [TTM] Initializing DMA pool allocator
[ 11.035770] nouveau [ DRM] VRAM: 512 MiB
[ 11.035772] nouveau [ DRM] GART: 1048576 MiB
[ 11.035776] nouveau [ DRM] TMDS table version 2.0
[ 11.035779] nouveau [ DRM] DCB version 4.0
[ 11.035781] nouveau [ DRM] DCB outp 00: 02000300 00000000
[ 11.035783] nouveau [ DRM] DCB outp 01: 01000302 00020030
[ 11.035786] nouveau [ DRM] DCB outp 02: 02021362 00020010
[ 11.035788] nouveau [ DRM] DCB outp 04: 01032310 00000000
[ 11.035790] nouveau [ DRM] DCB conn 00: 00001030
[ 11.035792] nouveau [ DRM] DCB conn 01: 00002161
[ 11.035795] nouveau [ DRM] DCB conn 02: 00000200
[ 11.079039] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.079041] [drm] No driver support for vblank timestamp query.
[ 11.126156] nouveau [ DRM] MM: using COPY for buffer copies
[ 11.182923] nouveau [ DRM] allocated 1920x1080 fb: 0x70000, bo ffff8800b85e4800
[ 11.183480] fbcon: nouveaufb (fb0) is primary device
[ 11.243061] Console: switching to colour frame buffer device 240x67
[ 11.246236] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
[ 11.246239] nouveau 0000:02:00.0: registered panic notifier
[ 11.246262] [drm] Initialized nouveau 1.1.1 20120801 for 0000:02:00.0 on minor 0
[ 12.448760] Adding 1951892k swap on /dev/sdb2. Priority:-1 extents:1 across:1951892k
[ 12.499048] kjournald starting. Commit interval 5 seconds
[ 12.499293] EXT3-fs (sdb1): using internal journal
[ 12.499298] EXT3-fs (sdb1): mounted filesystem with writeback data mode
[ 12.537775] kjournald starting. Commit interval 5 seconds
[ 12.538036] EXT3-fs (sdb6): using internal journal
[ 12.538042] EXT3-fs (sdb6): mounted filesystem with writeback data mode
[ 12.556783] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null)
[ 12.607628] EXT4-fs (sdb8): mounted filesystem with ordered data mode. Opts: (null)
[ 12.633611] EXT4-fs (sdb9): mounted filesystem with ordered data mode. Opts: (null)
[ 12.634890] btrfs: device fsid bacdf4ee-3b0c-423f-8f03-3701a7f24b74 devid 1 transid 155206 /dev/sda2
[ 12.635901] btrfs: use ssd allocation scheme
[-- Attachment #3: Type: text/plain, Size: 181 bytes --]
_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
prev parent reply other threads:[~2014-03-13 22:20 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-09 14:51 nouveau_fan_update: possible circular locking dependency detected Marcin Slusarz
[not found] ` <20140309145157.GA504-ilENSeTUhOw@public.gmane.org>
2014-03-13 13:38 ` Ilia Mirkin
[not found] ` <CAKb7UviyaTRBqjcj6wZo=5_rZ+9V8WyMeE6O03nDk1QW-LEYEg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-03-13 13:54 ` Martin Peres
2014-03-13 22:20 ` Marcin Slusarz [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140313222057.GA2900@joi.home \
--to=marcin.slusarz-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=imirkin-FrUbXkNCsVf2fBVCVOL8/A@public.gmane.org \
--cc=martin.peres-BktLLJ5BOkI@public.gmane.org \
--cc=nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.