From: Sitsofe Wheeler <sitsofe@yahoo.com>
To: Len Brown <len.brown@intel.com>, Pavel Machek <pavel@ucw.cz>,
"Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: linux-pm@vger.kernel.org
Subject: No suspend to RAM support
Date: Mon, 17 Mar 2014 20:53:12 +0000 [thread overview]
Message-ID: <20140317205302.GA14066@sucs.org> (raw)
Hi,
I have an (old) Athlon II Neo N36L but I've noticed that with the 3.2
Debian stable kernel only disk is present in /sys/power/state so
suspend to RAM can't be used (but hibernating and resuming work fine).
The machine seemingly supports S5 ACPI so I'm guessing there's a reason
suspend has been disabled but does anyone know what it is?
The same issue happens with the 3.11 kernel on a Fedora LiveCD. dmesg
below:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.54-2
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/trypticon-root ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bff90000 (usable)
[ 0.000000] BIOS-e820: 00000000bff9e000 - 00000000bffa0000 (reserved)
[ 0.000000] BIOS-e820: 00000000bffa0000 - 00000000bffaa600 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bffaa600 - 00000000bffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: HP ProLiant MicroServer, BIOS O41 10/01/2013
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbff90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bff90000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bff90000 page 4k
[ 0.000000] kernel direct mapping tables up to bff90000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ bff8e000-bff90000
[ 0.000000] RAMDISK: 36a28000 - 3750c000
[ 0.000000] ACPI: RSDP 00000000000f8f50 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 00000000bffa0100 0007C (v01 HP ProLiant 20131001 HP 00000097)
[ 0.000000] ACPI: FACP 00000000bffa0290 000F4 (v03 HP ProLiant 20131001 HP 00000097)
[ 0.000000] ACPI: DSDT 00000000bffa0620 06868 (v01 HP ProLiant 00000006 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bffae000 00040
[ 0.000000] ACPI: APIC 00000000bffa0390 00072 (v01 HP ProLiant 20131001 HP 00000097)
[ 0.000000] ACPI: MCFG 00000000bffa0410 0003C (v01 HP ProLiant 20131001 HP 00000097)
[ 0.000000] ACPI: SPMI 00000000bffa0450 00041 (v05 HP ProLiant 20131001 HP 00000097)
[ 0.000000] ACPI: OEMB 00000000bffae040 00072 (v01 HP ProLiant 20131001 HP 00000097)
[ 0.000000] ACPI: HPET 00000000bffab4e0 00038 (v01 HP ProLiant 20131001 HP 00000097)
[ 0.000000] ACPI: EINJ 00000000bffab520 00130 (v01 AMIER AMI_EINJ 20131001 HP 00000097)
[ 0.000000] ACPI: BERT 00000000bffab6b0 00030 (v01 AMIER AMI_BERT 20131001 HP 00000097)
[ 0.000000] ACPI: ERST 00000000bffab6e0 001B0 (v01 AMIER AMI_ERST 20131001 HP 00000097)
[ 0.000000] ACPI: HEST 00000000bffab890 000A8 (v01 AMIER ABC_HEST 20131001 HP 00000097)
[ 0.000000] ACPI: SSDT 00000000bffab940 00386 (v01 HP ProLiant 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [000000012fffb000 - 000000012fffffff]
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012ba00000-ffff88012effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bff90
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 982814
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 767944 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
[ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bff90000 - 00000000bff9e000
[ 0.000000] PM: Registered nosave memory: 00000000bff9e000 - 00000000bffa0000
[ 0.000000] PM: Registered nosave memory: 00000000bffa0000 - 00000000bffaa000
[ 0.000000] PM: Registered nosave memory: 00000000bffaa000 - 00000000bffab000
[ 0.000000] PM: Registered nosave memory: 00000000bffab000 - 00000000bffe0000
[ 0.000000] PM: Registered nosave memory: 00000000bffe0000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000ffa00000
[ 0.000000] PM: Registered nosave memory: 00000000ffa00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s82944 r8192 d23552 u524288
[ 0.000000] pcpu-alloc: s82944 r8192 d23552 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 965785
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/trypticon-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 3dc2000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
[ 0.000000] Memory: 3724248k/4980736k available (3429k kernel code, 1049480k absent, 207008k reserved, 3309k data, 576k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1297.914 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 2595.82 BogoMIPS (lpj=5191656)
[ 0.004013] pid_max: default: 32768 minimum: 301
[ 0.004096] Security Framework initialized
[ 0.004104] AppArmor: AppArmor disabled by boot time parameter
[ 0.008259] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010271] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.011208] Mount-cache hash table entries: 256
[ 0.011401] Initializing cgroup subsys cpuacct
[ 0.011409] Initializing cgroup subsys memory
[ 0.011428] Initializing cgroup subsys devices
[ 0.011434] Initializing cgroup subsys freezer
[ 0.011438] Initializing cgroup subsys net_cls
[ 0.011442] Initializing cgroup subsys blkio
[ 0.011453] Initializing cgroup subsys perf_event
[ 0.011498] tseg: 0000000000
[ 0.011521] CPU: Physical Processor ID: 0
[ 0.011524] CPU: Processor Core ID: 0
[ 0.011528] mce: CPU supports 6 MCE banks
[ 0.011542] using AMD E400 aware idle routine
[ 0.012097] ACPI: Core revision 20110623
[ 0.019112] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059892] CPU0: AMD Athlon(tm) II Neo N36L Dual-Core Processor stepping 03
[ 0.060003] Performance Events: AMD PMU driver.
[ 0.060003] ... version: 0
[ 0.060003] ... bit width: 48
[ 0.060003] ... generic registers: 4
[ 0.060003] ... value mask: 0000ffffffffffff
[ 0.060003] ... max period: 00007fffffffffff
[ 0.060003] ... fixed-purpose events: 0
[ 0.060003] ... event mask: 000000000000000f
[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060003] Booting Node 0, Processors #1
[ 0.060003] smpboot cpu 1: start_ip = 99000
[ 0.148038] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.148072] Brought up 2 CPUs
[ 0.148069] System has AMD C1E enabled
[ 0.148086] Total of 2 processors activated (5191.58 BogoMIPS).
[ 0.148069] Switch to broadcast mode on CPU1
[ 0.149032] Switch to broadcast mode on CPU0
[ 0.149032] devtmpfs: initialized
[ 0.156099] PM: Registering ACPI NVS region at bffaa600 (219648 bytes)
[ 0.156391] print_constraints: dummy:
[ 0.156508] NET: Registered protocol family 16
[ 0.156660] node 0 link 0: io port [1000, ffffff]
[ 0.156665] TOM: 00000000d0000000 aka 3328M
[ 0.156670] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.156676] node 0 link 0: mmio [a0000, bffff]
[ 0.156681] node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
[ 0.156688] node 0 link 0: mmio [f0000000, fe6fffff]
[ 0.156692] node 0 link 0: mmio [fe700000, fe8fffff]
[ 0.156697] node 0 link 0: mmio [fe900000, ffdfffff]
[ 0.156701] TOM2: 0000000130000000 aka 4864M
[ 0.156705] bus: [00, 1f] on node 0 link 0
[ 0.156709] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.156713] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.156716] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
[ 0.156720] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[ 0.156724] bus: 00 index 4 [mem 0x130000000-0xfcffffffff]
[ 0.156736] Extended Config Space enabled on 1 nodes
[ 0.156763] ACPI: bus type pci registered
[ 0.156865] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.156870] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.199858] PCI: Using configuration type 1 for base access
[ 0.200893] bio: create slab <bio-0> at 0
[ 0.200893] ACPI: Added _OSI(Module Device)
[ 0.200893] ACPI: Added _OSI(Processor Device)
[ 0.200893] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.200893] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.201351] ACPI: EC: Look up EC in DSDT
[ 0.204119] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.208547] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.220115] ACPI: OEMN 00000000bffaaeb0 00624 (v01 AMD NAHP 00000001 INTL 20051117)
[ 0.220452] ACPI: Dynamic OEM Table Load:
[ 0.220457] ACPI: OEMN (null) 00624 (v01 AMD NAHP 00000001 INTL 20051117)
[ 0.232241] \_SB_:_OSC evaluation returned wrong type
[ 0.232246] _OSC request data:1 17
[ 0.232536] ACPI: Interpreter enabled
[ 0.232542] ACPI: (supports S0 S4 S5)
[ 0.232573] ACPI: Using IOAPIC for interrupt routing
[ 0.239970] ACPI: No dock devices found.
[ 0.240049] HEST: Table parsing has been initialized.
[ 0.240056] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.240423] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.240760] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.240765] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.240770] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.240775] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.240780] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 0.240784] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.240794] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000dffff] (conflicts with Adapter ROM [mem 0x000cf000-0x000d19ff])
[ 0.240817] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
[ 0.240901] pci 0000:00:01.0: [103c:9602] type 1 class 0x000604
[ 0.240965] pci 0000:00:06.0: [1022:9606] type 1 class 0x000604
[ 0.241021] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.241069] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.241096] pci 0000:00:11.0: reg 10: [io 0xd000-0xd007]
[ 0.241109] pci 0000:00:11.0: reg 14: [io 0xc000-0xc003]
[ 0.241122] pci 0000:00:11.0: reg 18: [io 0xb000-0xb007]
[ 0.241134] pci 0000:00:11.0: reg 1c: [io 0xa000-0xa003]
[ 0.241147] pci 0000:00:11.0: reg 20: [io 0x9000-0x900f]
[ 0.241160] pci 0000:00:11.0: reg 24: [mem 0xfe6ffc00-0xfe6fffff]
[ 0.241244] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.241262] pci 0000:00:12.0: reg 10: [mem 0xfe6fe000-0xfe6fefff]
[ 0.241348] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.241372] pci 0000:00:12.2: reg 10: [mem 0xfe6ff800-0xfe6ff8ff]
[ 0.241469] pci 0000:00:12.2: supports D1 D2
[ 0.241473] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.241504] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.241521] pci 0000:00:13.0: reg 10: [mem 0xfe6fd000-0xfe6fdfff]
[ 0.241608] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.241631] pci 0000:00:13.2: reg 10: [mem 0xfe6ff400-0xfe6ff4ff]
[ 0.241727] pci 0000:00:13.2: supports D1 D2
[ 0.241731] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.241762] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.241852] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.241869] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.241882] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.241895] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.241907] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.241920] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.241966] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.242057] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.242116] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 0.242133] pci 0000:00:16.0: reg 10: [mem 0xfe6fc000-0xfe6fcfff]
[ 0.242219] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 0.242243] pci 0000:00:16.2: reg 10: [mem 0xfe6ff000-0xfe6ff0ff]
[ 0.242340] pci 0000:00:16.2: supports D1 D2
[ 0.242343] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.242373] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.242404] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.242429] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.242455] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.242485] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.242552] pci 0000:01:05.0: [1002:9712] type 0 class 0x000300
[ 0.242566] pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[ 0.242575] pci 0000:01:05.0: reg 14: [io 0xe000-0xe0ff]
[ 0.242583] pci 0000:01:05.0: reg 18: [mem 0xfe8f0000-0xfe8fffff]
[ 0.242599] pci 0000:01:05.0: reg 24: [mem 0xfe700000-0xfe7fffff]
[ 0.242627] pci 0000:01:05.0: supports D1 D2
[ 0.242675] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.242681] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.242686] pci 0000:00:01.0: bridge window [mem 0xfe700000-0xfe8fffff]
[ 0.242693] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.242761] pci 0000:02:00.0: [14e4:165b] type 0 class 0x000200
[ 0.242786] pci 0000:02:00.0: reg 10: [mem 0xfe9f0000-0xfe9fffff 64bit]
[ 0.242911] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.248068] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 0.248080] pci 0000:00:06.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.248163] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.248176] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.248181] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.248186] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.248190] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.248195] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.248219] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.248679] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.248762] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
[ 0.249125] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.249480] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.259482] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.259591] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.259697] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.259800] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[ 0.259884] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[ 0.259949] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[ 0.260026] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[ 0.260095] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[ 0.260284] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.260284] vgaarb: loaded
[ 0.260284] vgaarb: bridge control possible 0000:01:05.0
[ 0.260284] PCI: Using ACPI for IRQ routing
[ 0.270145] PCI: pci_cache_line_size set to 64 bytes
[ 0.270249] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 0.270254] reserve RAM buffer: 00000000bff90000 - 00000000bfffffff
[ 0.270450] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.270458] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.272068] Switching to clocksource hpet
[ 0.274827] pnp: PnP ACPI init
[ 0.274858] ACPI: bus type pnp registered
[ 0.275065] pnp 00:00: [bus 00-ff]
[ 0.275070] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.275074] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.275078] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.275083] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.275087] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.275091] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[ 0.275095] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.275192] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.275660] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.275664] pnp 00:01: [mem 0xc0000000-0xcfffffff]
[ 0.275748] system 00:01: [mem 0xc0000000-0xcfffffff] has been reserved
[ 0.275754] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.275849] pnp 00:02: [dma 4]
[ 0.275852] pnp 00:02: [io 0x0000-0x000f]
[ 0.275856] pnp 00:02: [io 0x0081-0x0083]
[ 0.275860] pnp 00:02: [io 0x0087]
[ 0.275863] pnp 00:02: [io 0x0089-0x008b]
[ 0.275867] pnp 00:02: [io 0x008f]
[ 0.275870] pnp 00:02: [io 0x00c0-0x00df]
[ 0.275922] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.275940] pnp 00:03: [io 0x0070-0x0071]
[ 0.275956] pnp 00:03: [irq 8]
[ 0.276020] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.276095] pnp 00:04: [io 0x0061]
[ 0.276149] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.276166] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.276208] pnp 00:05: [irq 13]
[ 0.276259] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.276306] pnp 00:06: [mem 0xfed00000-0xfed003ff]
[ 0.276358] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.276503] pnp 00:07: [io 0x0060]
[ 0.276507] pnp 00:07: [io 0x0064]
[ 0.276511] pnp 00:07: [mem 0xfec00000-0xfec00fff]
[ 0.276515] pnp 00:07: [mem 0xfee00000-0xfee00fff]
[ 0.276594] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.276600] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.276605] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.276858] pnp 00:08: [io 0x0010-0x001f]
[ 0.276862] pnp 00:08: [io 0x0022-0x003f]
[ 0.276865] pnp 00:08: [io 0x0062-0x0063]
[ 0.276869] pnp 00:08: [io 0x0065-0x006f]
[ 0.276872] pnp 00:08: [io 0x0072-0x007f]
[ 0.276876] pnp 00:08: [io 0x0080]
[ 0.276879] pnp 00:08: [io 0x0084-0x0086]
[ 0.276883] pnp 00:08: [io 0x0088]
[ 0.276886] pnp 00:08: [io 0x008c-0x008e]
[ 0.276889] pnp 00:08: [io 0x0090-0x009f]
[ 0.276893] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.276896] pnp 00:08: [io 0x00b1]
[ 0.276900] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.276903] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.276907] pnp 00:08: [io 0x040b]
[ 0.276910] pnp 00:08: [io 0x04d6]
[ 0.276913] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.276917] pnp 00:08: [io 0x0c14]
[ 0.276920] pnp 00:08: [io 0x0c50-0x0c51]
[ 0.276924] pnp 00:08: [io 0x0c52]
[ 0.276927] pnp 00:08: [io 0x0c6c]
[ 0.276930] pnp 00:08: [io 0x0c6f]
[ 0.276933] pnp 00:08: [io 0x0cd0-0x0cd1]
[ 0.276939] pnp 00:08: [io 0x0cd2-0x0cd3]
[ 0.276942] pnp 00:08: [io 0x0cd4-0x0cd5]
[ 0.276946] pnp 00:08: [io 0x0cd6-0x0cd7]
[ 0.276949] pnp 00:08: [io 0x0cd8-0x0cdf]
[ 0.276953] pnp 00:08: [io 0x0800-0x089f]
[ 0.276957] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.276961] pnp 00:08: [io 0x0b00-0x0b1f]
[ 0.276964] pnp 00:08: [io 0x0b20-0x0b3f]
[ 0.276968] pnp 00:08: [io 0x0900-0x090f]
[ 0.276971] pnp 00:08: [io 0x0910-0x091f]
[ 0.276975] pnp 00:08: [io 0xfe00-0xfefe]
[ 0.276978] pnp 00:08: [io 0x0060]
[ 0.276982] pnp 00:08: [io 0x0064]
[ 0.276985] pnp 00:08: [mem 0xffb80000-0xffbfffff]
[ 0.276989] pnp 00:08: [mem 0xfec10000-0xfec1001f]
[ 0.276993] pnp 00:08: [mem 0xfed80000-0xfed80fff]
[ 0.276997] pnp 00:08: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.277136] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.277141] system 00:08: [io 0x040b] has been reserved
[ 0.277146] system 00:08: [io 0x04d6] has been reserved
[ 0.277151] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.277155] system 00:08: [io 0x0c14] has been reserved
[ 0.277160] system 00:08: [io 0x0c50-0x0c51] has been reserved
[ 0.277165] system 00:08: [io 0x0c52] has been reserved
[ 0.277169] system 00:08: [io 0x0c6c] has been reserved
[ 0.277174] system 00:08: [io 0x0c6f] has been reserved
[ 0.277178] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 0.277183] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 0.277188] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.277193] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.277197] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.277202] system 00:08: [io 0x0800-0x089f] has been reserved
[ 0.277207] system 00:08: [io 0x0b00-0x0b1f] has been reserved
[ 0.277212] system 00:08: [io 0x0b20-0x0b3f] has been reserved
[ 0.277216] system 00:08: [io 0x0900-0x090f] has been reserved
[ 0.277222] system 00:08: [io 0x0910-0x091f] has been reserved
[ 0.277227] system 00:08: [io 0xfe00-0xfefe] has been reserved
[ 0.277233] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.277238] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.277243] system 00:08: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.277249] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.277322] pnp 00:09: [mem 0xe0000000-0xefffffff]
[ 0.277401] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.277407] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.277581] pnp 00:0a: [mem 0x00000000-0x0009ffff]
[ 0.277586] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.277590] pnp 00:0a: [mem 0x000e0000-0x000fffff]
[ 0.277594] pnp 00:0a: [mem 0x00100000-0xbfffffff]
[ 0.277598] pnp 00:0a: [mem 0xfec00000-0xffffffff]
[ 0.277630] pnp 00:0a: [Firmware Bug]: [mem 0x00000000-0xffffffffffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xe0000000-0xefffffff]; adding more reservations
[ 0.277695] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.277700] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.277706] system 00:0a: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.277711] system 00:0a: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.277716] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.277869] pnp: PnP ACPI: found 11 devices
[ 0.277873] ACPI: ACPI bus type pnp unregistered
[ 0.293882] PCI: max bus depth: 1 pci_try_num: 2
[ 0.293909] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.293914] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.293920] pci 0000:00:01.0: bridge window [mem 0xfe700000-0xfe8fffff]
[ 0.293926] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.293933] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 0.293939] pci 0000:00:06.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.293946] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.293983] pci 0000:00:06.0: setting latency timer to 64
[ 0.293994] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.293998] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.294002] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.294006] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff]
[ 0.294010] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff]
[ 0.294015] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.294018] pci_bus 0000:01: resource 1 [mem 0xfe700000-0xfe8fffff]
[ 0.294023] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.294027] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.294032] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.294036] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.294040] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.294044] pci_bus 0000:03: resource 7 [mem 0xc0000000-0xdfffffff]
[ 0.294048] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff]
[ 0.294180] NET: Registered protocol family 2
[ 0.294421] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.296206] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.300270] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.300758] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.300763] TCP reno registered
[ 0.300780] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.300831] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.301056] NET: Registered protocol family 1
[ 0.301076] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 1.764214] pci 0000:01:05.0: Boot video device
[ 1.764229] PCI: CLS 64 bytes, default 64
[ 1.764330] Unpacking initramfs...
[ 2.201506] Freeing initrd memory: 11152k freed
[ 2.207266] PCI-DMA: Disabling AGP.
[ 2.207427] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 2.207431] PCI-DMA: using GART IOMMU.
[ 2.207436] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 2.214246] IBS: LVT offset 1 assigned
[ 2.214285] perf: AMD IBS detected (0x0000001f)
[ 2.214719] audit: initializing netlink socket (disabled)
[ 2.214739] type=2000 audit(1394060049.212:1): initialized
[ 2.240871] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.242430] VFS: Disk quotas dquot_6.5.2
[ 2.242498] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.242662] msgmni has been set to 7424
[ 2.243069] alg: No test for stdrng (krng)
[ 2.243134] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.243140] io scheduler noop registered
[ 2.243143] io scheduler deadline registered
[ 2.243186] io scheduler cfq registered (default)
[ 2.243421] pcieport 0000:00:06.0: setting latency timer to 64
[ 2.243478] pcieport 0000:00:06.0: irq 40 for MSI/MSI-X
[ 2.243746] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
[ 2.243752] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 2.243758] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
[ 2.243794] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.243829] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.243832] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 2.244514] APEI: Can not request iomem region <00000000bffc21ea-00000000bffc21ec> for GARs.
[ 2.244639] [Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled.
[ 2.244769] GHES: APEI firmware first mode is enabled by WHEA _OSC.
[ 2.244944] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.281203] Linux agpgart interface v0.103
[ 2.281382] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 3.212105] Refined TSC clocksource calibration: 1297.838 MHz.
[ 3.212114] Switching to clocksource tsc
[ 3.307660] i8042: No controller found
[ 3.307842] mousedev: PS/2 mouse device common for all mice
[ 3.307904] rtc_cmos 00:03: RTC can wake from S4
[ 3.308153] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 3.308191] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.308210] cpuidle: using governor ladder
[ 3.308213] cpuidle: using governor menu
[ 3.308555] TCP cubic registered
[ 3.308638] NET: Registered protocol family 10
[ 3.309425] Mobile IPv6
[ 3.309430] NET: Registered protocol family 17
[ 3.309436] Registering the dns_resolver key type
[ 3.309937] PM: Hibernation image not present or could not be loaded.
[ 3.309959] registered taskstats version 1
[ 3.311387] rtc_cmos 00:03: setting system clock to 2014-03-05 22:54:10 UTC (1394060050)
[ 3.311463] Initializing network drop monitor service
[ 3.313611] Freeing unused kernel memory: 576k freed
[ 3.313832] Write protecting the kernel read-only data: 6144k
[ 3.318416] Freeing unused kernel memory: 648k freed
[ 3.323655] Freeing unused kernel memory: 688k freed
[ 3.348152] udevd[48]: starting version 175
[ 3.396104] usbcore: registered new interface driver usbfs
[ 3.396147] usbcore: registered new interface driver hub
[ 3.397660] SCSI subsystem initialized
[ 3.419417] usbcore: registered new device driver usb
[ 3.419892] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.420068] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 3.420119] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 3.420134] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.420166] QUIRK: Enable AMD PLL fix
[ 3.420181] ehci_hcd 0000:00:12.2: debug port 1
[ 3.420218] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe6ff800
[ 3.426937] libata version 3.00 loaded.
[ 3.432112] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 3.432158] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.432164] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.432169] usb usb1: Product: EHCI Host Controller
[ 3.432172] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 3.432176] usb usb1: SerialNumber: 0000:00:12.2
[ 3.432399] hub 1-0:1.0: USB hub found
[ 3.432408] hub 1-0:1.0: 5 ports detected
[ 3.432558] tg3.c:v3.121 (November 2, 2011)
[ 3.432621] tg3 0000:02:00.0: setting latency timer to 64
[ 3.436903] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.440768] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 3.440797] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 3.440813] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.440850] ehci_hcd 0000:00:13.2: debug port 1
[ 3.440872] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe6ff400
[ 3.452106] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 3.452155] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.452161] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.452166] usb usb2: Product: EHCI Host Controller
[ 3.452169] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 3.452173] usb usb2: SerialNumber: 0000:00:13.2
[ 3.456789] hub 2-0:1.0: USB hub found
[ 3.456798] hub 2-0:1.0: 5 ports detected
[ 3.482973] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95723) rev 5784100] (PCI Express) MAC address 3c:4a:92:72:37:f6
[ 3.482980] tg3 0000:02:00.0: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 3.482987] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 3.482992] tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 3.483400] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 3.483418] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 3.483430] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.483466] ehci_hcd 0000:00:16.2: debug port 1
[ 3.483487] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe6ff000
[ 3.492254] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 3.492301] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.492307] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.492311] usb usb3: Product: EHCI Host Controller
[ 3.492315] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 3.492318] usb usb3: SerialNumber: 0000:00:16.2
[ 3.492627] hub 3-0:1.0: USB hub found
[ 3.492638] hub 3-0:1.0: 4 ports detected
[ 3.493419] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 3.494343] scsi0 : pata_atiixp
[ 3.494636] scsi1 : pata_atiixp
[ 3.495948] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 3.495952] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 3.496158] ahci 0000:00:11.0: version 3.0
[ 3.496289] ahci 0000:00:11.0: irq 41 for MSI/MSI-X
[ 3.496419] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 3.496426] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 3.497831] scsi2 : ahci
[ 3.497984] scsi3 : ahci
[ 3.498124] scsi4 : ahci
[ 3.498260] scsi5 : ahci
[ 3.498417] ata3: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd00 irq 41
[ 3.498423] ata4: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd80 irq 41
[ 3.498428] ata5: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe00 irq 41
[ 3.498434] ata6: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe80 irq 41
[ 3.498727] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 3.498747] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 3.498789] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe6fe000
[ 3.556176] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.556182] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.556187] usb usb4: Product: OHCI Host Controller
[ 3.556190] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[ 3.556194] usb usb4: SerialNumber: 0000:00:12.0
[ 3.556474] hub 4-0:1.0: USB hub found
[ 3.556520] hub 4-0:1.0: 5 ports detected
[ 3.556722] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 3.556737] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 3.556765] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe6fd000
[ 3.616168] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.616175] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.616179] usb usb5: Product: OHCI Host Controller
[ 3.616182] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[ 3.616185] usb usb5: SerialNumber: 0000:00:13.0
[ 3.616498] hub 5-0:1.0: USB hub found
[ 3.616546] hub 5-0:1.0: 5 ports detected
[ 3.616802] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 3.616826] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 6
[ 3.616861] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe6fc000
[ 3.678612] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.678619] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.678623] usb usb6: Product: OHCI Host Controller
[ 3.678626] usb usb6: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[ 3.678630] usb usb6: SerialNumber: 0000:00:16.0
[ 3.678941] hub 6-0:1.0: USB hub found
[ 3.678989] hub 6-0:1.0: 4 ports detected
[ 3.816176] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.820202] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.820266] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.912122] usb 4-1: new low-speed USB device number 2 using ohci_hcd
[ 3.992159] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.992880] ata3.00: failed to enable AA (error_mask=0x1)
[ 3.992932] ata3.00: ATA-8: VB0250EAVER, HPG0, max UDMA/100
[ 3.992938] ata3.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.993901] ata3.00: failed to enable AA (error_mask=0x1)
[ 3.993956] ata3.00: configured for UDMA/100
[ 3.994316] scsi 2:0:0:0: Direct-Access ATA VB0250EAVER HPG0 PQ: 0 ANSI: 5
[ 4.002845] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 4.003183] sd 2:0:0:0: [sda] Write Protect is off
[ 4.003189] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.003219] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.034673] sda: sda1 sda2 < sda5 >
[ 4.035826] sd 2:0:0:0: [sda] Attached SCSI disk
[ 4.039052] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 4.093274] usb 4-1: New USB device found, idVendor=046d, idProduct=c05b
[ 4.093281] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.093286] usb 4-1: Product: USB Optical Mouse
[ 4.093290] usb 4-1: Manufacturer: Logitech
[ 4.104637] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/input/input0
[ 4.104975] generic-usb 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-1/input0
[ 4.105010] usbcore: registered new interface driver usbhid
[ 4.105014] usbhid: USB HID core driver
[ 4.330505] device-mapper: uevent: version 1.0.3
[ 4.330794] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 4.684102] PM: Starting manual resume from disk
[ 4.684109] PM: Hibernation image partition 254:1 present
[ 4.684112] PM: Looking for hibernation image.
[ 4.684399] PM: Image not found (code -22)
[ 4.684405] PM: Hibernation image not present or could not be loaded.
[ 4.703018] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 4.703573] SGI XFS Quota Management subsystem
[ 4.706110] XFS (dm-0): Mounting Filesystem
[ 4.864432] XFS (dm-0): Ending clean mount
[ 6.133531] udevd[350]: starting version 175
[ 6.382562] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.411512] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 6.411523] ACPI: Power Button [PWRB]
[ 6.411625] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 6.411631] ACPI: Power Button [PWRF]
[ 6.527689] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 6.576298] ACPI: processor limited to max C-state 1
[ 6.583029] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 6.600114] EDAC MC: Ver: 2.1.0
[ 6.603224] MCE: In-kernel MCE decoding enabled.
[ 6.605713] AMD64 EDAC driver v3.4.0
[ 6.605776] EDAC amd64: DRAM ECC enabled.
[ 6.605792] EDAC amd64: F10h detected (node 0).
[ 6.605825] EDAC MC: DCT0 chip selects:
[ 6.605829] EDAC amd64: MC: 0: 1024MB 1: 1024MB
[ 6.605833] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 6.605836] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 6.605839] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 6.605842] EDAC MC: DCT1 chip selects:
[ 6.605845] EDAC amd64: MC: 0: 1024MB 1: 1024MB
[ 6.605848] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 6.605852] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 6.605855] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 6.605857] EDAC amd64: using x4 syndromes.
[ 6.605860] EDAC amd64: MCT channel count: 2
[ 6.605913] EDAC amd64: CS0: Unbuffered DDR3 RAM
[ 6.605917] EDAC amd64: CS1: Unbuffered DDR3 RAM
[ 6.605961] EDAC MC0: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:18.2
[ 6.606101] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[ 6.728453] powernow-k8: Found 1 AMD Athlon(tm) II Neo N36L Dual-Core Processor (2 cpu cores) (version 2.20.00)
[ 6.728520] powernow-k8: 0 : pstate 0 (1300 MHz)
[ 6.728524] powernow-k8: 1 : pstate 1 (1100 MHz)
[ 6.728527] powernow-k8: 2 : pstate 2 (800 MHz)
[ 6.806305] Error: Driver 'pcspkr' is already registered, aborting...
[ 6.949049] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 6.949243] SP5100 TCO timer: mmio address 0xb8fe00 already in use
[ 7.008296] [drm] Initialized drm 1.1.0 20060810
[ 7.059680] [drm] radeon defaulting to kernel modesetting.
[ 7.059685] [drm] radeon kernel modesetting enabled.
[ 7.101553] radeon 0000:01:05.0: setting latency timer to 64
[ 7.101572] [drm] initializing kernel modesetting (RS880 0x1002:0x9712 0x103C:0x1609).
[ 7.101659] [drm] register mmio base: 0xFE8F0000
[ 7.101665] [drm] register mmio size: 65536
[ 7.109661] ATOM BIOS: AMD_1407_150
[ 7.109704] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[ 7.109713] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 7.110666] [drm] Detected VRAM RAM=256M, BAR=256M
[ 7.110675] [drm] RAM width 32bits DDR
[ 7.110864] [TTM] Zone kernel: Available graphics memory: 1901632 kiB
[ 7.110872] [TTM] Initializing pool allocator
[ 7.110886] [TTM] Initializing DMA pool allocator
[ 7.110951] [drm] radeon: 256M of VRAM memory ready
[ 7.110957] [drm] radeon: 512M of GTT memory ready.
[ 7.111000] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 7.112883] [drm] radeon: ib pool ready.
[ 7.113115] [drm] Loading RS780 Microcode
[ 7.227706] platform radeon_cp.0: firmware: agent loaded radeon/RS780_pfp.bin into memory
[ 7.242212] platform radeon_cp.0: firmware: agent loaded radeon/RS780_me.bin into memory
[ 7.260760] platform radeon_cp.0: firmware: agent loaded radeon/R600_rlc.bin into memory
[ 7.265958] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 7.266162] radeon 0000:01:05.0: WB enabled
[ 7.266172] [drm] fence driver on ring 0 use gpu addr 0xa0000c00 and cpu addr 0xffff88012a094c00
[ 7.266183] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.266189] [drm] Driver supports precise vblank timestamp query.
[ 7.266225] [drm] radeon: irq initialized.
[ 7.299077] [drm] ring test on 0 succeeded in 0 usecs
[ 7.299309] [drm] ib test on ring 0 succeeded in 0 usecs
[ 7.299774] [drm] Radeon Display Connectors
[ 7.299779] [drm] Connector 0:
[ 7.299783] [drm] VGA
[ 7.299789] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 7.299794] [drm] Encoders:
[ 7.299799] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 7.299843] [drm] radeon: power management initialized
[ 7.325634] [drm] fb mappable at 0xD0142000
[ 7.325641] [drm] vram apper at 0xD0000000
[ 7.325645] [drm] size 3145728
[ 7.325650] [drm] fb depth is 24
[ 7.325654] [drm] pitch is 4096
[ 7.325887] fbcon: radeondrmfb (fb0) is primary device
[ 7.356585] Console: switching to colour frame buffer device 128x48
[ 7.368438] fb0: radeondrmfb frame buffer device
[ 7.368443] drm: registered panic notifier
[ 7.368458] [drm] Initialized radeon 2.16.0 20080528 for 0000:01:05.0 on minor 0
[ 9.132162] loop: module loaded
[ 9.861118] Adding 7860220k swap on /dev/mapper/trypticon-swap_1. Priority:-1 extents:1 across:7860220k
[ 10.505039] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 10.538238] XFS (dm-2): Mounting Filesystem
[ 10.775473] XFS (dm-2): Ending clean mount
[ 10.827900] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 10.866468] ISO 9660 Extensions: RRIP_1991A
[ 11.844588] tg3 0000:02:00.0: irq 42 for MSI/MSI-X
[ 12.620772] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.079766] tg3 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex
[ 15.079778] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX
[ 15.081270] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.171156] RPC: Registered named UNIX socket transport module.
[ 19.171165] RPC: Registered udp transport module.
[ 19.171171] RPC: Registered tcp transport module.
[ 19.171177] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 19.197217] FS-Cache: Loaded
[ 19.235733] FS-Cache: Netfs 'nfs' registered for caching
[ 19.255659] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 26.056195] eth0: no IPv6 routers present
[ 218.551240] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[ 218.551249] PM: Marking nosave pages: 00000000bff90000 - 0000000100000000
[ 218.553517] PM: Marking nosave pages: 00000000b4000000 - 00000000b8000000
[ 218.554001] PM: Basic memory bitmaps created
[ 218.554003] PM: Syncing filesystems ... done.
[ 218.771097] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 218.784179] PM: Preallocating image memory... done (allocated 48733 pages)
[ 218.949998] PM: Allocated 194932 kbytes in 0.16 seconds (1218.32 MB/s)
[ 218.950003] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 218.964314] Suspending console(s) (use no_console_suspend to debug)
[ 220.000695] PM: freeze of devices complete after 1036.369 msecs
[ 220.001144] PM: late freeze of devices complete after 0.444 msecs
[ 220.001290] ACPI: Preparing to enter system sleep state S4
[ 220.001955] PM: Saving platform NVS memory
[ 220.003314] Disabling non-boot CPUs ...
[ 220.004877] CPU 1 is now offline
[ 220.005533] Extended CMOS year: 2000
[ 220.005612] PM: Creating hibernation image:
[ 220.008857] PM: Need to copy 48569 pages
[ 220.008857] PM: Normal pages needed: 48569 + 1024, available pages: 917782
[ 220.008857] PM: Restoring platform NVS memory
[ 220.008857] PCI-DMA: Resuming GART IOMMU
[ 220.008857] PCI-DMA: Restoring GART aperture settings
[ 220.008857] Extended CMOS year: 2000
[ 220.008857] Enabling non-boot CPUs ...
[ 220.008857] Booting Node 0 Processor 1 APIC 0x1
[ 220.008857] smpboot cpu 1: start_ip = 99000
[ 220.004852] Calibrating delay loop (skipped) already calibrated this CPU
[ 220.004852] Switch to broadcast mode on CPU1
[ 220.037584] NMI watchdog enabled, takes one hw-pmu counter.
[ 220.038087] CPU1 is up
[ 220.038898] ACPI: Waking up from system sleep state S4
[ 220.039916] PM: early restore of devices complete after 0.721 msecs
[ 220.083312] radeon 0000:01:05.0: setting latency timer to 64
[ 220.090507] tg3 0000:02:00.0: eth0: Link is down
[ 220.218079] usb usb4: root hub lost power or was reset
[ 220.222140] usb usb5: root hub lost power or was reset
[ 220.226200] usb usb6: root hub lost power or was reset
[ 220.226280] usb usb1: root hub lost power or was reset
[ 220.226363] usb usb2: root hub lost power or was reset
[ 220.226420] usb usb3: root hub lost power or was reset
[ 220.241999] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 220.243146] radeon 0000:01:05.0: WB enabled
[ 220.243151] [drm] fence driver on ring 0 use gpu addr 0xa0000c00 and cpu addr 0xffff88012a094c00
[ 220.283279] [drm] ring test on 0 succeeded in 0 usecs
[ 220.283333] [drm] ib test on ring 0 succeeded in 0 usecs
[ 220.331728] sd 2:0:0:0: [sda] Starting disk
[ 220.524265] ata5: SATA link down (SStatus 0 SControl 300)
[ 220.968195] ata4: SATA link down (SStatus 0 SControl 300)
[ 220.976193] ata6: SATA link down (SStatus 0 SControl 300)
[ 221.140168] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 221.140888] ata3.00: failed to enable AA (error_mask=0x1)
[ 221.141836] ata3.00: failed to enable AA (error_mask=0x1)
[ 221.141847] ata3.00: configured for UDMA/100
[ 221.178350] PM: restore of devices complete after 1095.515 msecs
[ 221.178761] PM: Image restored successfully.
[ 221.178764] Restarting tasks ...
[ 221.178988] usb 4-1: USB disconnect, device number 2
[ 221.180411] done.
[ 221.180448] PM: Basic memory bitmaps freed
[ 223.268088] tg3 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex
[ 223.268099] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX
--
Sitsofe | http://sucs.org/~sits/
next reply other threads:[~2014-03-17 21:33 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-17 20:53 Sitsofe Wheeler [this message]
2014-03-18 9:59 ` No suspend to RAM support Pavel Machek
2014-03-18 17:18 ` Sitsofe Wheeler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140317205302.GA14066@sucs.org \
--to=sitsofe@yahoo.com \
--cc=len.brown@intel.com \
--cc=linux-pm@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=rjw@rjwysocki.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.