[PATCH 2/3] ARM i.MX6: Fix ethernet PLL clocks

[shawn.guo@freescale.com (Shawn Guo)]

On Tue, Apr 08, 2014 at 01:44:06PM +0200, Dirk Behme wrote:
> I'm no expert on this, but it seems to be able to use 100MHz or
> 125Mhz enet clock, you additionally have to set the ENABLE_100M
> (CCM_ANALOG_PLL_ENET[20]) or ENABLE_125M (CCM_ANALOG_PLL_ENET[19])
> bits. Which isn't done by above change,

The following two lines added by the patch should just do.

	clk[sata_ref_100m] = imx_clk_gate("sata_ref_100m", "sata_ref", base + 0xe0, 20);
	clk[pcie_ref_125m] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19);

> and even worse, it's not
> possible with switching from dedicated clk_pllv3_enet_set_rate() to
> the generic ones using the clk_enet_ref_table.

Hmm, I'm not sure I understand it.  But why not possible?

Shawn