diff for duplicates of <20140411090936.GC20147@kwain> diff --git a/a/1.txt b/N1/1.txt index 4c8b8ce..efc0c8e 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,11 +1,11 @@ Hi Andrew, On Fri, Apr 11, 2014 at 10:18:59AM +0200, Andrew Lunn wrote: -> On Thu, Apr 10, 2014 at 03:07:54PM +0200, Antoine T?nart wrote: +> On Thu, Apr 10, 2014 at 03:07:54PM +0200, Antoine Ténart wrote: > > The uart0 pinmux configuration is in the dtsi because uart0 will always > > use uart0-pmux to work, no other possibility. Same thing for uart1. > > -> > Signed-off-by: Antoine T?nart <antoine.tenart@free-electrons.com> +> > Signed-off-by: Antoine Ténart <antoine.tenart-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> > > --- > > arch/arm/boot/dts/berlin2.dtsi | 20 ++++++++++++++++++++ > > arch/arm/boot/dts/berlin2cd.dtsi | 13 +++++++++++++ @@ -20,7 +20,7 @@ On Fri, Apr 11, 2014 at 10:18:59AM +0200, Andrew Lunn wrote: > > }; > > }; > > -> > + pinctrl: pinctrl at 0 { +> > + pinctrl: pinctrl@0 { > > + compatible = "marvell,berlin2-pinctrl"; > > + reg = <0xea0000 0x08>, <0xfc0000 0x44>; > > + reg-names = "global_base", "apb_base"; @@ -69,6 +69,10 @@ This is what's done on the sunxi's pinctrl. Antoine -- -Antoine T?nart, Free Electrons +Antoine Ténart, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com +-- +To unsubscribe from this list: send the line "unsubscribe devicetree" in +the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org +More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index 4618c63..a3ee7da 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,20 +1,29 @@ "ref\01397135274-10764-1-git-send-email-antoine.tenart@free-electrons.com\0" "ref\01397135274-10764-6-git-send-email-antoine.tenart@free-electrons.com\0" "ref\020140411081859.GL10240@lunn.ch\0" - "From\0antoine.tenart@free-electrons.com (Antoine T\303\251nart)\0" - "Subject\0[PATCH RESEND 5/5] ARM: dts: berlin: add the pinctrl node and muxing setup for uarts\0" + "ref\020140411081859.GL10240-g2DYL2Zd6BY@public.gmane.org\0" + "From\0Antoine T\303\251nart <antoine.tenart-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>\0" + "Subject\0Re: [PATCH RESEND 5/5] ARM: dts: berlin: add the pinctrl node and muxing setup for uarts\0" "Date\0Fri, 11 Apr 2014 11:09:36 +0200\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>\0" + "Cc\0sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org" + linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org + zmxu-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org + jszhang-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org + devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org + " linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org\0" "\00:1\0" "b\0" "Hi Andrew,\n" "\n" "On Fri, Apr 11, 2014 at 10:18:59AM +0200, Andrew Lunn wrote:\n" - "> On Thu, Apr 10, 2014 at 03:07:54PM +0200, Antoine T?nart wrote:\n" + "> On Thu, Apr 10, 2014 at 03:07:54PM +0200, Antoine T\303\251nart wrote:\n" "> > The uart0 pinmux configuration is in the dtsi because uart0 will always\n" "> > use uart0-pmux to work, no other possibility. Same thing for uart1.\n" "> > \n" - "> > Signed-off-by: Antoine T?nart <antoine.tenart@free-electrons.com>\n" + "> > Signed-off-by: Antoine T\303\251nart <antoine.tenart-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>\n" "> > ---\n" "> > arch/arm/boot/dts/berlin2.dtsi | 20 ++++++++++++++++++++\n" "> > arch/arm/boot/dts/berlin2cd.dtsi | 13 +++++++++++++\n" @@ -29,7 +38,7 @@ "> > \t\t\t};\n" "> > \t\t};\n" "> > \n" - "> > +\t\tpinctrl: pinctrl at 0 {\n" + "> > +\t\tpinctrl: pinctrl@0 {\n" "> > +\t\t\tcompatible = \"marvell,berlin2-pinctrl\";\n" "> > +\t\t\treg = <0xea0000 0x08>, <0xfc0000 0x44>;\n" "> > +\t\t\treg-names = \"global_base\", \"apb_base\";\n" @@ -78,8 +87,12 @@ "Antoine\n" "\n" "-- \n" - "Antoine T?nart, Free Electrons\n" + "Antoine T\303\251nart, Free Electrons\n" "Embedded Linux, Kernel and Android engineering\n" - http://free-electrons.com + "http://free-electrons.com\n" + "--\n" + "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" + "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" + More majordomo info at http://vger.kernel.org/majordomo-info.html -7c37fa872f956e38f88971c45dd72b8d866da27238978cc95c7440a17fa81c47 +2a22fbabf752bbb7dea8e874147acfe953e72122ba312010ded7e6cec1b036c7
diff --git a/a/1.txt b/N2/1.txt index 4c8b8ce..0883e41 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -1,11 +1,11 @@ Hi Andrew, On Fri, Apr 11, 2014 at 10:18:59AM +0200, Andrew Lunn wrote: -> On Thu, Apr 10, 2014 at 03:07:54PM +0200, Antoine T?nart wrote: +> On Thu, Apr 10, 2014 at 03:07:54PM +0200, Antoine Ténart wrote: > > The uart0 pinmux configuration is in the dtsi because uart0 will always > > use uart0-pmux to work, no other possibility. Same thing for uart1. > > -> > Signed-off-by: Antoine T?nart <antoine.tenart@free-electrons.com> +> > Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com> > > --- > > arch/arm/boot/dts/berlin2.dtsi | 20 ++++++++++++++++++++ > > arch/arm/boot/dts/berlin2cd.dtsi | 13 +++++++++++++ @@ -20,7 +20,7 @@ On Fri, Apr 11, 2014 at 10:18:59AM +0200, Andrew Lunn wrote: > > }; > > }; > > -> > + pinctrl: pinctrl at 0 { +> > + pinctrl: pinctrl@0 { > > + compatible = "marvell,berlin2-pinctrl"; > > + reg = <0xea0000 0x08>, <0xfc0000 0x44>; > > + reg-names = "global_base", "apb_base"; @@ -69,6 +69,6 @@ This is what's done on the sunxi's pinctrl. Antoine -- -Antoine T?nart, Free Electrons +Antoine Ténart, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com diff --git a/a/content_digest b/N2/content_digest index 4618c63..7e70c77 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -1,20 +1,28 @@ "ref\01397135274-10764-1-git-send-email-antoine.tenart@free-electrons.com\0" "ref\01397135274-10764-6-git-send-email-antoine.tenart@free-electrons.com\0" "ref\020140411081859.GL10240@lunn.ch\0" - "From\0antoine.tenart@free-electrons.com (Antoine T\303\251nart)\0" - "Subject\0[PATCH RESEND 5/5] ARM: dts: berlin: add the pinctrl node and muxing setup for uarts\0" + "From\0Antoine T\303\251nart <antoine.tenart@free-electrons.com>\0" + "Subject\0Re: [PATCH RESEND 5/5] ARM: dts: berlin: add the pinctrl node and muxing setup for uarts\0" "Date\0Fri, 11 Apr 2014 11:09:36 +0200\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Andrew Lunn <andrew@lunn.ch>\0" + "Cc\0sebastian.hesselbarth@gmail.com" + linus.walleij@linaro.org + zmxu@marvell.com + jszhang@marvell.com + devicetree@vger.kernel.org + linux-kernel@vger.kernel.org + alexandre.belloni@free-electrons.com + " linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "Hi Andrew,\n" "\n" "On Fri, Apr 11, 2014 at 10:18:59AM +0200, Andrew Lunn wrote:\n" - "> On Thu, Apr 10, 2014 at 03:07:54PM +0200, Antoine T?nart wrote:\n" + "> On Thu, Apr 10, 2014 at 03:07:54PM +0200, Antoine T\303\251nart wrote:\n" "> > The uart0 pinmux configuration is in the dtsi because uart0 will always\n" "> > use uart0-pmux to work, no other possibility. Same thing for uart1.\n" "> > \n" - "> > Signed-off-by: Antoine T?nart <antoine.tenart@free-electrons.com>\n" + "> > Signed-off-by: Antoine T\303\251nart <antoine.tenart@free-electrons.com>\n" "> > ---\n" "> > arch/arm/boot/dts/berlin2.dtsi | 20 ++++++++++++++++++++\n" "> > arch/arm/boot/dts/berlin2cd.dtsi | 13 +++++++++++++\n" @@ -29,7 +37,7 @@ "> > \t\t\t};\n" "> > \t\t};\n" "> > \n" - "> > +\t\tpinctrl: pinctrl at 0 {\n" + "> > +\t\tpinctrl: pinctrl@0 {\n" "> > +\t\t\tcompatible = \"marvell,berlin2-pinctrl\";\n" "> > +\t\t\treg = <0xea0000 0x08>, <0xfc0000 0x44>;\n" "> > +\t\t\treg-names = \"global_base\", \"apb_base\";\n" @@ -78,8 +86,8 @@ "Antoine\n" "\n" "-- \n" - "Antoine T?nart, Free Electrons\n" + "Antoine T\303\251nart, Free Electrons\n" "Embedded Linux, Kernel and Android engineering\n" http://free-electrons.com -7c37fa872f956e38f88971c45dd72b8d866da27238978cc95c7440a17fa81c47 +43856b76f42d482f28d31d88a3812941243783eb9a7b188dee9688ed15cf243f
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.