From: Borislav Petkov <bp@alien8.de>
To: lkml <linux-kernel@vger.kernel.org>
Cc: Micky Ching <micky_ching@realsil.com.cn>,
Chris Ball <chris@printf.net>, Wei WANG <wei_wang@realsil.com.cn>
Subject: rtsx_pci_sdmmc lockdep splat
Date: Tue, 15 Apr 2014 19:49:34 +0200 [thread overview]
Message-ID: <20140415174934.GD4826@pd.tnic> (raw)
Hi all,
I'm seeing the following when I insert an sd card. Kernel is 3.15-rc1+.
Thanks.
[ 682.675345] rtsx_pci_sdmmc rtsx_pci_sdmmc.0: sdmmc_get_cd: RTSX_BIPR = 0x00010000
[ 682.679723] mmc0: mmc_rescan_try_freq: trying to init card at 400000 Hz
[ 682.683778] mmc0: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 682.689135] rtsx_pci_sdmmc rtsx_pci_sdmmc.0: sdmmc_switch_voltage: signal_voltage = 0
[ 682.701892] mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 682.718034] mmc0: starting CMD52 arg 00000c00 flags 00000195
[ 682.720975] rtsx_pci_sdmmc rtsx_pci_sdmmc.0: sd_send_cmd: SD/MMC CMD 52, arg = 0x00000c00
[ 682.723749]
[ 682.726488] ======================================================
[ 682.729295] [ INFO: possible circular locking dependency detected ]
[ 682.732138] 3.15.0-rc1+ #3 Not tainted
[ 682.734989] -------------------------------------------------------
[ 682.737905] kworker/u4:0/6 is trying to acquire lock:
[ 682.740853] (&(&pcr->lock)->rlock){-.-...}, at: [<ffffffffa0004387>] rtsx_pci_add_cmd+0x47/0xb0 [rtsx_pci]
[ 682.743945]
[ 682.743945] but task is already holding lock:
[ 682.749951] (&(&host->lock)->rlock#3){-.....}, at: [<ffffffffa00bc577>] sdmmc_request+0x57/0x579 [rtsx_pci_sdmmc]
[ 682.753076]
[ 682.753076] which lock already depends on the new lock.
[ 682.753076]
[ 682.762208]
[ 682.762208] the existing dependency chain (in reverse order) is:
[ 682.768191]
[ 682.768191] -> #1 (&(&host->lock)->rlock#3){-.....}:
[ 682.774134] [<ffffffff810bdfd6>] lock_acquire+0x96/0x130
[ 682.777063] [<ffffffff8153729b>] _raw_spin_lock+0x3b/0x50
[ 682.779959] [<ffffffffa00bb91d>] sd_isr_done_transfer+0x2d/0x80 [rtsx_pci_sdmmc]
[ 682.782861] [<ffffffffa0005679>] rtsx_pci_isr+0x119/0x220 [rtsx_pci]
[ 682.785736] [<ffffffff810cdea7>] handle_irq_event_percpu+0x47/0x1e0
[ 682.788584] [<ffffffff810ce088>] handle_irq_event+0x48/0x70
[ 682.791387] [<ffffffff810d0a9f>] handle_edge_irq+0x8f/0x150
[ 682.794195] [<ffffffff81004cee>] handle_irq+0x1e/0x30
[ 682.797026] [<ffffffff8153a8da>] do_IRQ+0x6a/0x110
[ 682.799831] [<ffffffff8153812f>] ret_from_intr+0x0/0x13
[ 682.802645] [<ffffffff81099ea8>] __atomic_notifier_call_chain+0x88/0xb0
[ 682.805465] [<ffffffff81099ee6>] atomic_notifier_call_chain+0x16/0x20
[ 682.808246] [<ffffffff8133af46>] do_con_write.part.18+0x176/0xa10
[ 682.811028] [<ffffffff8133b895>] con_write+0x75/0x80
[ 682.813758] [<ffffffff81324ac5>] n_tty_write+0x325/0x4d0
[ 682.816497] [<ffffffff81321540>] tty_write+0x150/0x2b0
[ 682.819195] [<ffffffff8118d571>] do_loop_readv_writev+0x61/0x90
[ 682.821901] [<ffffffff8118ef25>] do_readv_writev+0x205/0x210
[ 682.824583] [<ffffffff8118efb0>] vfs_writev+0x30/0x60
[ 682.827226] [<ffffffff8118f0f2>] SyS_writev+0x52/0xc0
[ 682.829821] [<ffffffff81538c92>] system_call_fastpath+0x16/0x1b
[ 682.832383]
[ 682.832383] -> #0 (&(&pcr->lock)->rlock){-.-...}:
[ 682.837324] [<ffffffff810bd570>] __lock_acquire+0x1690/0x1950
[ 682.839790] [<ffffffff810bdfd6>] lock_acquire+0x96/0x130
[ 682.842229] [<ffffffff815373f6>] _raw_spin_lock_irqsave+0x46/0x60
[ 682.844650] [<ffffffffa0004387>] rtsx_pci_add_cmd+0x47/0xb0 [rtsx_pci]
[ 682.847029] [<ffffffffa00bbc0b>] sd_send_cmd+0xcb/0x3c0 [rtsx_pci_sdmmc]
[ 682.849359] [<ffffffffa00bc7c0>] sdmmc_request+0x2a0/0x579 [rtsx_pci_sdmmc]
[ 682.851649] [<ffffffffa009082f>] mmc_start_request+0x16f/0x280 [mmc_core]
[ 682.853921] [<ffffffffa00909ca>] __mmc_start_req+0x6a/0xa0 [mmc_core]
[ 682.856162] [<ffffffffa0090f7a>] mmc_wait_for_cmd+0x7a/0xd0 [mmc_core]
[ 682.858387] [<ffffffffa009bed0>] mmc_io_rw_direct_host+0x90/0x120 [mmc_core]
[ 682.860608] [<ffffffffa009c416>] sdio_reset+0x26/0x70 [mmc_core]
[ 682.862815] [<ffffffffa009399d>] mmc_rescan+0x29d/0x350 [mmc_core]
[ 682.865007] [<ffffffff8108deba>] process_one_work+0x21a/0x560
[ 682.867175] [<ffffffff8108e320>] worker_thread+0x120/0x390
[ 682.869286] [<ffffffff81094aac>] kthread+0xfc/0x120
[ 682.871341] [<ffffffff81538bec>] ret_from_fork+0x7c/0xb0
[ 682.873404]
[ 682.873404] other info that might help us debug this:
[ 682.873404]
[ 682.879197] Possible unsafe locking scenario:
[ 682.879197]
[ 682.883048] CPU0 CPU1
[ 682.884972] ---- ----
[ 682.886860] lock(&(&host->lock)->rlock#3);
[ 682.888763] lock(&(&pcr->lock)->rlock);
[ 682.890686] lock(&(&host->lock)->rlock#3);
[ 682.892608] lock(&(&pcr->lock)->rlock);
[ 682.894492]
[ 682.894492] *** DEADLOCK ***
[ 682.894492]
[ 682.899913] 4 locks held by kworker/u4:0/6:
[ 682.901735] #0: ("kmmcd"){.+.+..}, at: [<ffffffff8108de45>] process_one_work+0x1a5/0x560
[ 682.903677] #1: ((&(&host->detect)->work)){+.+...}, at: [<ffffffff8108de45>] process_one_work+0x1a5/0x560
[ 682.905678] #2: (&pcr->pcr_mutex){+.+...}, at: [<ffffffffa00bc56f>] sdmmc_request+0x4f/0x579 [rtsx_pci_sdmmc]
[ 682.907737] #3: (&(&host->lock)->rlock#3){-.....}, at: [<ffffffffa00bc577>] sdmmc_request+0x57/0x579 [rtsx_pci_sdmmc]
[ 682.909851]
[ 682.909851] stack backtrace:
[ 682.913909] CPU: 1 PID: 6 Comm: kworker/u4:0 Not tainted 3.15.0-rc1+ #3
[ 682.915987] Hardware name: LENOVO 30515QG/30515QG, BIOS 8RET30WW (1.12 ) 09/15/2011
[ 682.918124] Workqueue: kmmcd mmc_rescan [mmc_core]
[ 682.920264] ffffffff8202f4f0 ffff880119949940 ffffffff8152f1c5 ffffffff81ff6fd0
[ 682.922471] ffff880119949980 ffffffff8152c20e ffff8801199499d0 ffff8801198e59a8
[ 682.924690] 0000000000000003 ffff8801198e51e0 0000000000000004 ffff8801198e59a8
[ 682.926923] Call Trace:
[ 682.929136] [<ffffffff8152f1c5>] dump_stack+0x4e/0x7a
[ 682.931384] [<ffffffff8152c20e>] print_circular_bug+0x203/0x211
[ 682.933625] [<ffffffff810bd570>] __lock_acquire+0x1690/0x1950
[ 682.935869] [<ffffffff81537591>] ? _raw_spin_unlock_irqrestore+0x41/0x80
[ 682.938106] [<ffffffffa0004387>] ? rtsx_pci_add_cmd+0x47/0xb0 [rtsx_pci]
[ 682.940345] [<ffffffff810bdfd6>] lock_acquire+0x96/0x130
[ 682.942585] [<ffffffffa0004387>] ? rtsx_pci_add_cmd+0x47/0xb0 [rtsx_pci]
[ 682.944835] [<ffffffff815373f6>] _raw_spin_lock_irqsave+0x46/0x60
[ 682.947089] [<ffffffffa0004387>] ? rtsx_pci_add_cmd+0x47/0xb0 [rtsx_pci]
[ 682.949350] [<ffffffffa0004387>] rtsx_pci_add_cmd+0x47/0xb0 [rtsx_pci]
[ 682.951601] [<ffffffffa00bbc0b>] sd_send_cmd+0xcb/0x3c0 [rtsx_pci_sdmmc]
[ 682.953849] [<ffffffffa00bc7c0>] sdmmc_request+0x2a0/0x579 [rtsx_pci_sdmmc]
[ 682.956116] [<ffffffffa009082f>] mmc_start_request+0x16f/0x280 [mmc_core]
[ 682.958382] [<ffffffffa00909ca>] __mmc_start_req+0x6a/0xa0 [mmc_core]
[ 682.960642] [<ffffffffa0090f7a>] mmc_wait_for_cmd+0x7a/0xd0 [mmc_core]
[ 682.962906] [<ffffffffa0090940>] ? mmc_start_request+0x280/0x280 [mmc_core]
[ 682.965183] [<ffffffffa009bed0>] mmc_io_rw_direct_host+0x90/0x120 [mmc_core]
[ 682.967471] [<ffffffffa009c416>] sdio_reset+0x26/0x70 [mmc_core]
[ 682.969765] [<ffffffffa009399d>] mmc_rescan+0x29d/0x350 [mmc_core]
[ 682.972056] [<ffffffff8108deba>] process_one_work+0x21a/0x560
[ 682.974342] [<ffffffff8108de45>] ? process_one_work+0x1a5/0x560
[ 682.976634] [<ffffffff8108e320>] worker_thread+0x120/0x390
[ 682.978916] [<ffffffff8108e200>] ? process_one_work+0x560/0x560
[ 682.981209] [<ffffffff81094aac>] kthread+0xfc/0x120
[ 682.983499] [<ffffffff815375fc>] ? _raw_spin_unlock_irq+0x2c/0x60
[ 682.985826] [<ffffffff810949b0>] ? kthread_create_on_node+0x1f0/0x1f0
[ 682.988182] [<ffffffff81538bec>] ret_from_fork+0x7c/0xb0
[ 682.990534] [<ffffffff810949b0>] ? kthread_create_on_node+0x1f0/0x1f0
[ 683.033350] rtsx_pci_sdmmc rtsx_pci_sdmmc.0: timeout for request
--
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--
next reply other threads:[~2014-04-15 17:49 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-15 17:49 Borislav Petkov [this message]
2014-04-16 1:50 ` rtsx_pci_sdmmc lockdep splat micky
2014-04-20 12:20 ` Borislav Petkov
2014-04-21 8:47 ` micky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140415174934.GD4826@pd.tnic \
--to=bp@alien8.de \
--cc=chris@printf.net \
--cc=linux-kernel@vger.kernel.org \
--cc=micky_ching@realsil.com.cn \
--cc=wei_wang@realsil.com.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.