From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
To: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>,
Nishanth Menon <nm@ti.com>,
linux-omap <linux-omap@vger.kernel.org>,
Javier Martinez Canillas <javier.martinez@collabora.co.uk>,
Linus Walleij <linus.walleij@linaro.org>
Subject: Re: regressions in linux-next?
Date: Tue, 22 Apr 2014 16:37:54 -0300 [thread overview]
Message-ID: <20140422193754.GA28885@arch.cereza> (raw)
In-Reply-To: <CABxcv=mu=xvt7cM7Q8vBP2hQH124=CL9Yuox8WWcVGeKJ+NSjA@mail.gmail.com>
On Apr 22, Javier Martinez Canillas wrote:
> On Tue, Apr 22, 2014 at 3:29 PM, Peter Ujfalusi <peter.ujfalusi@ti.com> wrote:
> > On 04/22/2014 04:18 PM, Nishanth Menon wrote:
> >> next-20140422-omap2plus_defconfig
> >> 1: am335x-sk: Boot FAIL: http://slexy.org/raw/s2gh6XsLve
> >> 2: am3517-evm: Boot PASS: http://slexy.org/raw/s2MTkdzPnb
> >> 3: am37x-evm: Boot PASS: http://slexy.org/raw/s2SJwrVat8
> >> 4: am43xx-epos: Boot PASS: http://slexy.org/raw/s2184jfKlq
> >> 5: am43xx-gpevm: Boot FAIL: http://slexy.org/raw/s21qIYDHqa
> >>> known
> >> 6: BeagleBoard-XM: Boot FAIL: http://slexy.org/raw/s21EyANlGX
> >> 7: beagleboard-vanilla: Boot FAIL: http://slexy.org/raw/s20lc3icwS
> >> 8: beaglebone-black: Boot PASS: http://slexy.org/raw/s2ykosQg6C
> >> 9: beaglebone: Boot PASS: http://slexy.org/raw/s2DN9gqlmo
> >> 10: craneboard: Boot FAIL: http://slexy.org/raw/s21bP0auhl
> >> 11: DRA7xx-EVM: Boot FAIL: http://slexy.org/raw/s2rBG0C1x6
> >> 12: OMAP3430-Labrador(LDP): Boot PASS: http://slexy.org/raw/s2N3afw0TI
> >> 13: n900: Boot PASS: http://slexy.org/raw/s21qmT6XCJ
> >> 14: pandaboard-es: Boot FAIL: http://slexy.org/raw/s28vlMGdeh
> >> 15: pandaboard-vanilla: Boot FAIL: http://slexy.org/raw/s20yHoGHdW
> >> 16: sdp2430: Boot PASS: http://slexy.org/raw/s20i8Ir3yn
> >> 17: sdp3430: Boot PASS: http://slexy.org/raw/s20t4VTeEB
> >> 18: sdp4430: Boot FAIL: http://slexy.org/raw/s21SHcOP01
> >> 19: OMAP5432uEVM: Boot FAIL: http://slexy.org/raw/s2qmlRZped
> >> TOTAL = 19 boards, Booted Boards = 9, No Boot boards = 10
> >>
> >> next-20140417-omap2plus_defconfig
> >> 1: am335x-evm: Boot PASS: http://slexy.org/raw/s2Yvz8RRkn
> >> 2: am335x-sk: Boot FAIL: http://slexy.org/raw/s2JFbaPPVA
> >>> farm issues. - But peter reports fail as well.
> >
> > Yes, 20140417 boot fails for me on am335x-evmsk. What I can see with early
> > printk is that the boot hangs around/after omap-gpio in all cases without any
> > further information.
> > I have checked the diff between 20140407, which was fine on evmsk regarding to
> > omap-gpio and if I revert:
> > d04b76626e94 gpio: omap: convert driver to use gpiolib irqchip
> >
> > am335x-evmsk boots up fine.
> >
> > With that commit in place PandaBoardES boots fine, but evmsk does not.
> >
>
> I've revised the patch again and I couldn't find the reason why
> certain boards are failing to boot.
>
> I can't reproduce this issue since I only have a DM3730 IGEPv2 board
> which boots fine but I should have access to an AM3354 IGEP Aquila
> board which is similar to the am335x-evmsk so I may be able to debug
> it.
>
I've tested 20140422 -next on a Beaglebone black board with a custom
gpio-keys cape and it seems to be working fine.
All the gpio are registered, but there are some suspicious messages:
# dmesg | grep gpio
gpiochip_add: registered GPIOs 0 to 31 on device: gpio
gpiochip_add: registered GPIOs 32 to 63 on device: gpio
gpiochip_add: registered GPIOs 64 to 95 on device: gpio
gpiochip_add: registered GPIOs 96 to 127 on device: gpio
of_get_named_gpiod_flags: can't parse gpios property of node '/fixedregulator@0[0]'
of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@44e09000[0]'
of_get_named_gpiod_flags exited with status 0
of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@48060000[0]'
of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@481d8000[0]'
of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@481d8000[0]'
Regards,
--
Ezequiel García, Free Electrons
Embedded Linux, Kernel and Android Engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-04-22 19:38 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-22 13:18 regressions in linux-next? Nishanth Menon
2014-04-22 13:29 ` Peter Ujfalusi
2014-04-22 15:52 ` Javier Martinez Canillas
2014-04-22 19:37 ` Ezequiel Garcia [this message]
2014-04-22 22:32 ` Javier Martinez Canillas
2014-04-22 22:00 ` Linus Walleij
2014-04-22 23:03 ` Javier Martinez Canillas
2014-04-22 23:47 ` Tony Lindgren
2014-04-24 15:16 ` Kevin Hilman
2014-04-24 15:25 ` Nishanth Menon
2014-04-24 15:37 ` Javier Martinez Canillas
2014-04-24 15:42 ` Tony Lindgren
2014-04-24 16:33 ` Javier Martinez Canillas
2014-04-24 16:47 ` Tony Lindgren
2014-04-24 15:40 ` Tony Lindgren
2014-04-24 15:46 ` Nishanth Menon
2014-04-24 16:17 ` Tony Lindgren
2014-04-24 17:08 ` Nishanth Menon
2014-04-24 19:59 ` Aaro Koskinen
2014-04-24 19:22 ` Aaro Koskinen
2014-04-28 22:04 ` Paul Walmsley
2014-04-22 15:13 ` Nishanth Menon
2014-04-22 21:57 ` Nishanth Menon
2014-04-22 22:45 ` Javier Martinez Canillas
2014-04-22 22:52 ` Nishanth Menon
2014-04-22 23:08 ` Javier Martinez Canillas
2014-04-23 1:30 ` Nishanth Menon
2014-04-23 7:24 ` Javier Martinez Canillas
2014-04-23 10:59 ` Peter Ujfalusi
2014-04-23 13:01 ` Linus Walleij
2014-04-23 13:29 ` Nishanth Menon
2014-04-23 14:38 ` Linus Walleij
2014-04-23 14:50 ` Javier Martinez Canillas
2014-04-23 14:52 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140422193754.GA28885@arch.cereza \
--to=ezequiel.garcia@free-electrons.com \
--cc=javier.martinez@collabora.co.uk \
--cc=javier@dowhile0.org \
--cc=linus.walleij@linaro.org \
--cc=linux-omap@vger.kernel.org \
--cc=nm@ti.com \
--cc=peter.ujfalusi@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.