From: Christian Engelmayer <cengelma@gmx.at>
To: coelho@ti.com
Cc: linville@tuxdriver.com, peterhuewe@gmx.de, s.jegen@gmail.com,
jg1.han@samsung.com, linux-wireless@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] wlcore: fix usage of platform_device_add_data()
Date: Thu, 24 Apr 2014 22:35:56 +0200 [thread overview]
Message-ID: <20140424223556.34beb0c5@spike> (raw)
[-- Attachment #1: Type: text/plain, Size: 5238 bytes --]
Coverity CID 986698 reports leakage of struct wlcore_platdev_data in the
probe functions of both the SPI/SDIO interfaces. The structure passed to
platform_device_add_data() is dynamically allocated and only freed in the
error paths, however, platform_device_add_data() adds a copy of the platform
specific data to the device. Move the temporary struct that is kmemdup'ed
to the stack. This issue exists since afb43e6d (wlcore: remove if_ops from
platform_data).
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
---
Applies against v3.15-rc2 as well as branch master in tree
git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git and is compile
tested only.
---
drivers/net/wireless/ti/wlcore/sdio.c | 28 +++++++++++-----------------
drivers/net/wireless/ti/wlcore/spi.c | 23 +++++++++--------------
2 files changed, 20 insertions(+), 31 deletions(-)
diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c
index 29ef249..d3dd7bf 100644
--- a/drivers/net/wireless/ti/wlcore/sdio.c
+++ b/drivers/net/wireless/ti/wlcore/sdio.c
@@ -217,7 +217,7 @@ static struct wl1271_if_operations sdio_ops = {
static int wl1271_probe(struct sdio_func *func,
const struct sdio_device_id *id)
{
- struct wlcore_platdev_data *pdev_data;
+ struct wlcore_platdev_data pdev_data;
struct wl12xx_sdio_glue *glue;
struct resource res[1];
mmc_pm_flag_t mmcflags;
@@ -228,16 +228,13 @@ static int wl1271_probe(struct sdio_func *func,
if (func->num != 0x02)
return -ENODEV;
- pdev_data = kzalloc(sizeof(*pdev_data), GFP_KERNEL);
- if (!pdev_data)
- goto out;
-
- pdev_data->if_ops = &sdio_ops;
+ memset(&pdev_data, 0x00, sizeof(pdev_data));
+ pdev_data.if_ops = &sdio_ops;
glue = kzalloc(sizeof(*glue), GFP_KERNEL);
if (!glue) {
dev_err(&func->dev, "can't allocate glue\n");
- goto out_free_pdev_data;
+ goto out;
}
glue->dev = &func->dev;
@@ -248,9 +245,9 @@ static int wl1271_probe(struct sdio_func *func,
/* Use block mode for transferring over one block size of data */
func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
- pdev_data->pdata = wl12xx_get_platform_data();
- if (IS_ERR(pdev_data->pdata)) {
- ret = PTR_ERR(pdev_data->pdata);
+ pdev_data.pdata = wl12xx_get_platform_data();
+ if (IS_ERR(pdev_data.pdata)) {
+ ret = PTR_ERR(pdev_data.pdata);
dev_err(glue->dev, "missing wlan platform data: %d\n", ret);
goto out_free_glue;
}
@@ -260,7 +257,7 @@ static int wl1271_probe(struct sdio_func *func,
dev_dbg(glue->dev, "sdio PM caps = 0x%x\n", mmcflags);
if (mmcflags & MMC_PM_KEEP_POWER)
- pdev_data->pdata->pwr_in_suspend = true;
+ pdev_data.pdata->pwr_in_suspend = true;
sdio_set_drvdata(func, glue);
@@ -289,7 +286,7 @@ static int wl1271_probe(struct sdio_func *func,
memset(res, 0x00, sizeof(res));
- res[0].start = pdev_data->pdata->irq;
+ res[0].start = pdev_data.pdata->irq;
res[0].flags = IORESOURCE_IRQ;
res[0].name = "irq";
@@ -299,8 +296,8 @@ static int wl1271_probe(struct sdio_func *func,
goto out_dev_put;
}
- ret = platform_device_add_data(glue->core, pdev_data,
- sizeof(*pdev_data));
+ ret = platform_device_add_data(glue->core, &pdev_data,
+ sizeof(pdev_data));
if (ret) {
dev_err(glue->dev, "can't add platform data\n");
goto out_dev_put;
@@ -319,9 +316,6 @@ out_dev_put:
out_free_glue:
kfree(glue);
-out_free_pdev_data:
- kfree(pdev_data);
-
out:
return ret;
}
diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c
index dbe826d..5f3a389 100644
--- a/drivers/net/wireless/ti/wlcore/spi.c
+++ b/drivers/net/wireless/ti/wlcore/spi.c
@@ -327,27 +327,25 @@ static struct wl1271_if_operations spi_ops = {
static int wl1271_probe(struct spi_device *spi)
{
struct wl12xx_spi_glue *glue;
- struct wlcore_platdev_data *pdev_data;
+ struct wlcore_platdev_data pdev_data;
struct resource res[1];
int ret = -ENOMEM;
- pdev_data = kzalloc(sizeof(*pdev_data), GFP_KERNEL);
- if (!pdev_data)
- goto out;
+ memset(&pdev_data, 0x00, sizeof(pdev_data));
- pdev_data->pdata = dev_get_platdata(&spi->dev);
- if (!pdev_data->pdata) {
+ pdev_data.pdata = dev_get_platdata(&spi->dev);
+ if (!pdev_data.pdata) {
dev_err(&spi->dev, "no platform data\n");
ret = -ENODEV;
- goto out_free_pdev_data;
+ goto out;
}
- pdev_data->if_ops = &spi_ops;
+ pdev_data.if_ops = &spi_ops;
glue = kzalloc(sizeof(*glue), GFP_KERNEL);
if (!glue) {
dev_err(&spi->dev, "can't allocate glue\n");
- goto out_free_pdev_data;
+ goto out;
}
glue->dev = &spi->dev;
@@ -385,8 +383,8 @@ static int wl1271_probe(struct spi_device *spi)
goto out_dev_put;
}
- ret = platform_device_add_data(glue->core, pdev_data,
- sizeof(*pdev_data));
+ ret = platform_device_add_data(glue->core, &pdev_data,
+ sizeof(pdev_data));
if (ret) {
dev_err(glue->dev, "can't add platform data\n");
goto out_dev_put;
@@ -406,9 +404,6 @@ out_dev_put:
out_free_glue:
kfree(glue);
-out_free_pdev_data:
- kfree(pdev_data);
-
out:
return ret;
}
--
1.9.1
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
next reply other threads:[~2014-04-24 20:36 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-24 20:35 Christian Engelmayer [this message]
2014-04-24 20:55 ` [PATCH RESEND] wlcore: fix usage of platform_device_add_data() Christian Engelmayer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140424223556.34beb0c5@spike \
--to=cengelma@gmx.at \
--cc=coelho@ti.com \
--cc=jg1.han@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=peterhuewe@gmx.de \
--cc=s.jegen@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.